Provided by: powerman_2.3.5-1_i386 bug

NAME

       powerman.conf - configuration file for PowerMan

DESCRIPTION

       The  powerman.conf  file  typically  includes one or more of the remote
       power controller (RPC)  device  files  provided  in  the  /etc/powerman
       directory;  sets  a  few  global options; instantiates RPC devices with
       unique names, hostnames, and ports; and maps node names  to  RPC’s  and
       plug numbers.

       Network-attached RPC’s are instantiated with device lines of the form:

              device "name" "type" "host:port"

       Serial-attached RPC’s are instantiated with device lines of the form:

              device "name" "type" "special file" "flags"

       where  special  file  is  the full path to a tty device, and flags is a
       serial parameter specification in a form similar to that used by  lilo,
       e.g.    "9600,8n1".   RPC’s  that  are  accessed  via  coprocesses  are
       instantiated as follows:

              device "name" "type" "process |&"

       where process is the full path to a process whose standard  output  and
       input  will be controlled by powerman, e.g. "/usr/bin/conman -Q -j rpc0
       |&".

EXAMPLE

       The following example is a 16-node cluster that uses two 8-plug Baytech
       RPC-3 remote power controllers.

       include "/etc/powerman/baytech.dev"  # include def for "baytech" RPC

       tcpwrappers yes                      # enable TCP wrappers

       # listen "0.0.0.0:10101"             # uncomment to listen on all interfaces

       # Alias example - alias can be used in target specifications
       alias "pengra_service" "pengra[0-1]"
       alias "pengra_compute" "pengra[2-15]"

       # Power controller: device <name> <type> <hostname:port> [<flags>]
       device "pow0" "baytech" "pow0:23"  # instantiate pow0
       device "pow1" "baytech" "pow1:23"  # instantiate pow1

       # Plugs: node <name> <device> [<plug>]
       node "pengra[0-7]" "pow0" "[1-8]"  # map pengra0...pengra7 to pow0 plug 1-8
       node "pengra[8-15]" "pow1" "[1-8]" # map pengra8...pengra15 to pow1 plug 1-8

FILES

       /etc/powerman/powerman.conf
       /etc/powerman/*.dev

ORIGIN

       PowerMan  was  originally  developed  by Andrew Uselton on LLNL’s Linux
       clusters.  This software is open source and distributed under the terms
       of the GNU GPL.

SEE ALSO

       powerman(1),    powermand(8),   httppower(8),   plmpower(8),   vpcd(8),
       powerman.conf(5), powerman.dev(5), powerman-devices(7).

       http://sourceforge.net/projects/powerman