Provided by: gridengine-common_6.2u5-1ubuntu1_all bug

NAME

       bootstrap - Sun Grid Engine bootstrap file

DESCRIPTION

       bootstrap  contains  parameters  that are needed for the startup of Sun
       Grid  Engine  components.   It  is  created  during   the   sge_qmaster
       installation.    Modifying   bootstrap  in  a  running  system  is  not
       supported.

FORMAT

       The paragraphs that follow provide brief descriptions of the individual
       parameters  that  compose  the  bootstrap  configuration for a Sun Grid
       Engine cluster:

   admin_user
       Administrative user account used by Sun Grid Engine  for  all  internal
       file  handling (status spooling, message logging, etc.). Can be used in
       cases where the root account  does  not  have  the  corresponding  file
       access  permissions  (e.g.  on a shared file system without global root
       read/write access).

       Being a parameter set at installation time  changing  admin_user  in  a
       running  system  is  not supported. Changing it manually on a shut-down
       cluster is possible, but if access to the Sun Grid Engine spooling area
       is interrupted, this will result in unpredictable behavior.

       The  admin_user  parameter  has  no  default  value,  but instead it is
       defined during the master installation procedure.

   default_domain
       Only needed if your Sun Grid Engine cluster covers hosts  belonging  to
       more  than  a  single  DNS  domain. In this case it can be used if your
       hostname resolving yields both qualified and unqualified hostnames  for
       the  hosts  in  one of the DNS domains.  The value of default_domain is
       appended to the  unqualified  hostname  to  define  a  fully  qualified
       hostname.    The  default_domain  parameter  will  have  no  effect  if
       ignore_fqdn is set to "true".

       Being a parameter set at installation time changing default_domain in a
       running  system  is  not  supported.  The default for default_domain is
       "none", in which case it will not be used.

   ignore_fqdn
       Ignore fully qualified domain name component of  hostnames.  Should  be
       set  if  all hosts belonging to a Sun Grid Engine cluster are part of a
       single DNS domain. It is switched on if set to either  "true"  or  "1".
       Switching  it  on may solve problems with load reports due to different
       hostname resolutions across the cluster.

       Being a parameter set at installation time changing  ignore_fqdn  in  a
       running system is not supported. The default for ignore_fqdn is "true".

   spooling_method
       Defines how sge_qmaster(8) writes  its  configuration  and  the  status
       information of a running cluster.

       The available spooling methods are berkeleydb and classic.

   spooling_lib
       The  name  of  a  shared  library  containing the spooling_method to be
       loaded  at   sge_qmaster(8)   initialization   time.    The   extension
       characterizing  a  shared  library  (.so,  .sl,  .dylib  etc.)  is  not
       contained in spooling_lib.

       If  spooling_method  was  set  to   berkeleydb   during   installation,
       spooling_lib   is   set   to   libspoolb,  if  classic  was  chosen  as
       spooling_method, spooling_lib is set to libspoolc.

       Not all operating systems allow the dynamic loading  of  libraries.  On
       these  platforms  a  certain  spooling  method (default: berkeleydb) is
       compiled into the binaries  and  the  parameter  spooling_lib  will  be
       ignored.

   spooling_params
       Defines parameters to the chosen spooling method.

       Parameters  that  are needed to initialize the spooling framework, e.g.
       to open database files or to connect to a certain database server.

       The  spooling  parameters  value  for  spooling  method  berkeleydb  is
       [rpc_server:]database                  directory,                  e.g.
       /sge_local/default/spool/qmaster/spooldb  for  spooling  to   a   local
       filesystem, or myhost:sge for spooling over a Berkeley DB RPC server.

       For  spooling  method  classic  the  spooling  parameters take the form
       <common_dir>;<qmaster            spool            dir>,            e.g.
       /sge/default/common;/sge/default/spool/qmaster

   binary_path
       The  directory  path  where  the Sun Grid Engine binaries reside. It is
       used within Sun Grid Engine components to locate and startup other  Sun
       Grid Engine programs.

       The  path  name  given  here  is  searched  for binaries as well as any
       directory below with a directory name equal to  the  current  operating
       system   architecture.   Therefore,  /usr/SGE/bin  will  work  for  all
       architectures,  if  the   corresponding   binaries   are   located   in
       subdirectories  named  aix43, cray, lx24-x86, hp11, irix65, tru64, sol-
       sparc, etc.

       The default location for the binary path is <sge_root>/bin

   qmaster_spool_dir
       The location  where  the  master  spool  directory  resides.  Only  the
       sge_qmaster(8)   and   sge_shadowd(8)  need  to  have  access  to  this
       directory.  The master spool directory - in particular the  job_scripts
       directory  and the messages log file - may become quite large depending
       on the size of the cluster and the number of jobs. Be sure to  allocate
       enough  disk  space  and  regularly clean off the log files, e.g. via a
       cron(8) job.

       Being a parameter set at installation time  changing  qmaster_spool_dir
       in a running system is not supported.

       The    default   location   for   the   master   spool   directory   is
       <sge_root>/<cell>/spool/qmaster.

   security_mode
       The security mode defines the set of security  features  the  installed
       cluster is using.

       Possible security mode settings are none, afs, dce, kerberos, csp.  (no
       additional security, AFS, DCE, KERBEROS, CSP security model).

   listener_threads
       The number of listener threads (defaults set by installation).

   worker_threads
       The number of worker threads (defaults set by installation).

   scheduler_threads
       The  number  of  scheduler  threads  (allowed:  0-1,  default  set   by
       installation: 1, off: 0).  (see qconf(1) -kt/-at option)

   jvm_threads
       The  number  of jvm threads (allowed: 0-1, default set by installation,
       off: 0).

COPYRIGHT

       See sge_intro(1) for a full statement of rights and permissions.