Provided by: srecord_1.55-1_i386 bug

NAME

       srec_ti_txt - Texas Instruments ti‐txt (MSP430) file format

DESCRIPTION

       The  ti‐TXT  format  is  used  by  the Texas Instruments MSP430 familty
       programming adapter.

       The TI‐TXT hex format supports 16‐bit hexadecimal data.  It consists of
       one or more sections, followed by the end‐of‐file indicator.

       Each  section  consistes  of  an at (@) sign followed a execution start
       address  (in  hexadecimal),  and  newline,  and  then  data  bytes  (in
       hexadecimal).  The section address is followed by a newline.  There are
       to be 16 data bytes per line, except for the last line in a section.

       The end‐of‐file indicator is the letter q followed by a  newline.   The
       end‐of‐file indicator mandatory.

   Size Multiplier
       In general, binary data will expand in sized by approximately 3.0 times
       when represented with this format.

EXAMPLE

       Here is an example ti‐txt file taken from the reference below:
              @F000
              31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3
              21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F
              @FFFE
              00 F0
              q

SEE ALSO

       http://www.ti.com/lit/pdf/slau101,  section  A.2.   Note:  the  portion
       which  says  addresses  must be even, and the number of data bytes in a
       section must be even, is wrong.

COPYRIGHT

       srec_ti_txt version 1.55
       Copyright (C) 1998, 1999, 2000, 2001, 2002,  2003,  2004,  2005,  2006,
       2007, 2008, 2009, 2010 Peter Miller

       The  srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details
       use the ’srec_ti_txt -VERSion License’ command.  This is free  software
       and  you  are  welcome to redistribute it under certain conditions; for
       details use the ’srec_ti_txt -VERSion License’ command.

AUTHOR

       Peter Miller   E‐Mail:   pmiller@opensource.org.au
       /\/\*             WWW:   http://miller.emu.id.au/pmiller/