Provided by: sane-utils_1.0.21-2ubuntu2_i386 bug

NAME

       scanimage - scan an image

SYNOPSIS

       scanimage  [-d|--device-name  dev]  [--format format] [-i|--icc-profile
       profile]   [-L|--list-devices]   [-f|--formatted-device-list    format]
       [--batch   [=format]]   [--batch-start   start]  [--batch-count  count]
       [--batch-increment  increment]   [--batch-double]   [--accept-md5-only]
       [-p|--progress] [-n|--dont-scan] [-T|--test] [-h|--help] [-v|--verbose]
       [-B|--buffer-size [=size]] [-V|--version] [device-specific-options]

DESCRIPTION

       scanimage is a command-line  interface  to  control  image  acquisition
       devices  such as flatbed scanners or cameras.  The device is controlled
       via command-line options.   After  command-line  processing,  scanimage
       normally  proceeds  to  acquire an image.  The image data is written to
       standard output in one of the PNM (portable aNyMaP)  formats  (PBM  for
       black-and-white  images,  PGM  for  grayscale images, and PPM for color
       images) or in TIFF (black-and-white, grayscale  or  color).   scanimage
       accesses image acquisition devices through the SANE (Scanner Access Now
       Easy) interface and can thus support any device for which there  exists
       a SANE backend (try apropos sane- to get a list of available backends).

EXAMPLES

       To get a list of devices:

         scanimage -L

       To scan with default settings to the file image.pnm:

         scanimage >image.pnm

       To scan 100x100 mm to the  file  image.tiff  (-x  and  -y  may  not  be
       available with all devices):

         scanimage -x 100 -y 100 --format=tiff >image.tiff

       To print all available options:

         scanimage -h

OPTIONS

       Parameters are separated by a blank from single-character options (e.g.
       -d  epson)  and  by  a   "="   from   multi-character   options   (e.g.
       --device-name=epson).

       The  -d or --device-name options must be followed by a SANE device-name
       like ‘epson:/dev/sg0’ or ‘hp:/dev/usbscanner0’.  A  (partial)  list  of
       available  devices  can be obtained with the --list-devices option (see
       below).  If no device-name is specified explicitly, scanimage  reads  a
       device-name from the environment variable SANE_DEFAULT_DEVICE.  If this
       variable is not set, scanimage will attempt to open the first available
       device.

       The  --format  format  option  selects  how  image  data  is written to
       standard output.  format can be pnm or tiff.  If --format is not  used,
       PNM is written.

       The -i or --icc-profile option is used to include an ICC profile into a
       TIFF file.

       The -L or --list-devices option requests a (partial)  list  of  devices
       that are available.  The list is not complete since some devices may be
       available, but are not listed in any of the configuration files  (which
       are  typically  stored in directory /etc/sane.d).  This is particularly
       the case when accessing scanners through the network.  If a  device  is
       not listed in a configuration file, the only way to access it is by its
       full device name.  You may need to consult your system administrator to
       find out the names of such devices.

       The   -f   or   --formatted-device-list   option   works   similar   to
       --list-devices, but requires a format string.  scanimage  replaces  the
       placeholders %d %v %m %t %i %n with the device name, vendor name, model
       name, scanner type, an  index  number  and  newline  respectively.  The
       command

              scanimage  -f    scanner number %i device %d is a %t, model %m,
              produced by %v 

       will produce something like:

              scanner number 0  device sharp:/dev/sg1 is  a  flatbed  scanner,
              model JX250 SCSI, produced by SHARP

       The  --batch* options provide the features for scanning documents using
       document feeders.  --batch [format] is used to specify  the  format  of
       the  filename  that each page will be written to.  Each page is written
       out to a single file.  If format  is  not  specified,  the  default  of
       out%d.pnm  (or  out%d.tif  for  --format tiff) will be used.  format is
       given  as  a  printf  style  string   with   one   integer   parameter.
       --batch-start start selects the page number to start naming files with.
       If  this  option  is  not  given,  the  counter  will   start   at   0.
       --batch-count  count  specifies the number of pages to attempt to scan.
       If not given,  scanimage  will  continue  scanning  until  the  scanner
       returns  a state other than OK.  Not all scanners with document feeders
       signal when the ADF is empty, use this command  to  work  around  them.
       With  --batch-increment  increment  you  can change the amount that the
       number in the filename is incremented by.  Generally this is used  when
       you  are  scanning  double-sided  documents  on a single-sided document
       feeder.  A specific command is provided  to  aid  this:  --batch-double
       will automatically set the increment to 2.  --batch-prompt will ask for
       pressing RETURN before scanning a page. This can be used  for  scanning
       multiple pages without an automatic document feeder.

       The  --accept-md5-only  option only accepts user authorization requests
       that support MD5 security. The SANE network daemon (saned)  is  capable
       of doing such requests. See saned(8).

       The  -p  or --progress option requests that scanimage prints a progress
       counter. It shows how much image data of the current image has  already
       been received by scanimage (in percent).

       The  -n  or  --dont-scan  option  requests that scanimage only sets the
       options provided by the user but doesn’t actually perform a scan.  This
       option can be used to e.g. turn off the scanner’s lamp (if supported by
       the backend).

       The -T or --test option requests that scanimage performs a  few  simple
       sanity  tests to make sure the backend works as defined by the SANE API
       (in particular the sane_read function is exercised by this test).

       The -h or --help options request help information.  The information  is
       printed on standard output and in this case, no attempt will be made to
       acquire an image.

       The -v or --verbose options increase the verbosity of the operation  of
       scanimage.    The   option  may  be  specified  repeatedly,  each  time
       increasing the verbosity level.

       The -B or --buffer-size changes the input buffer size from 32KB to  the
       number kB specified or 1M.

       The  -V  or --version option requests that scanimage prints the program
       and package name, the version number of the SANE distribution  that  it
       came  with and the version of the backend that it loads. Usually that’s
       the dll backend. If more information about the version numbers  of  the
       backends  are  necessary, the DEBUG variable for the dll backend can be
       used. Example: SANE_DEBUG_DLL=3 scanimage -L.

       As you might imagine, much of the power of  scanimage  comes  from  the
       fact  that  it  can  control  any SANE backend.  Thus, the exact set of
       command-line options  depends  on  the  capabilities  of  the  selected
       device.   To  see  the options for a device named dev, invoke scanimage
       via a command-line of the form:

              scanimage --help --device-name dev

       The documentation for the device-specific options printed by --help  is
       best explained with a few examples:

        -l 0..218mm [0]
           Top-left x position of scan area.

              The  description  above  shows  that option -l expects an option
              value in the range from 0  to  218  mm.   The  value  in  square
              brackets  indicates  that the current option value is 0 mm. Most
              backends  provide  similar  geometry  options  for  top-left   y
              position (-t), width (-x) and height of scan-area (-y).

        --brightness -100..100% [0]
           Controls the brightness of the acquired image.

              The  description above shows that option --brightness expects an
              option value in the range from -100 to 100 percent.   The  value
              in  square brackets indicates that the current option value is 0
              percent.

        --default-enhancements
           Set default values for enhancement controls.

              The description above shows that  option  --default-enhancements
              has  no  option  value.   It  should  be thought of as having an
              immediate effect at the point of the command-line  at  which  it
              appears.  For example, since this option resets the --brightness
              option, the option-pair --brightness  50  --default-enhancements
              would effectively be a no-op.

        --mode Lineart|Gray|Color [Gray]
           Selects the scan mode (e.g., lineart or color).

              The  description  above  shows  that  option  --mode  accepts an
              argument that must be one  of  the  strings  Lineart,  Gray,  or
              Color.   The  value  in  the  square  bracket indicates that the
              option is currently set to Gray.  For convenience, it  is  legal
              to  abbreviate  the string values as long as they remain unique.
              Also, the case of the spelling  doesn’t  matter.   For  example,
              option setting --mode col is identical to --mode Color.

        --custom-gamma[=(yes|no)] [inactive]
           Determines whether a builtin or a custom gamma-table
           should be used.

              The  description  above shows that option --custom-gamma expects
              either no option value,  a  "yes"  string,  or  a  "no"  string.
              Specifying  the option with no value is equivalent to specifying
              "yes".  The value in square-brackets indicates that  the  option
              is  not currently active.  That is, attempting to set the option
              would result in an error message.  The set of available  options
              typically  depends  on  the  settings  of  other  options.   For
              example, the --custom-gamma table might be active  only  when  a
              grayscale or color scan-mode has been requested.

              Note  that  the  --help option is processed only after all other
              options have been processed.  This makes it possible to see  the
              option   settings  for  a  particular  mode  by  specifying  the
              appropriate mode-options along  with  the  --help  option.   For
              example, the command-line:

              scanimage --help --mode color

              would  print  the  option  settings  that are in effect when the
              color-mode is selected.

        --gamma-table 0..255,...
           Gamma-correction table.  In color mode this option
           equally affects the red, green, and blue channels
           simultaneously (i.e., it is an intensity gamma table).

              The description above shows that  option  --gamma-table  expects
              zero or more values in the range 0 to 255.  For example, a legal
              value for this option would be "3,4,5,6,7,8,9,10,11,12".   Since
              it’s  cumbersome  to specify long vectors in this form, the same
              can be expressed by the  abbreviated  form  "[0]3-[9]12".   What
              this  means  is  that  the first vector element is set to 3, the
              9-th element is  set  to  12  and  the  values  in  between  are
              interpolated  linearly.   Of  course,  it is possible to specify
              multiple     such     linear     segments.      For     example,
              "[0]3-[2]3-[6]7,[7]10-[9]6"        is        equivalent       to
              "3,3,3,4,5,6,7,10,8,6".  The program gamma4scanimage can be used
              to  generate  such  gamma  tables  (see  gamma4scanimage(1)  for
              details).

        --filename <string> [/tmp/input.ppm]
           The filename of the image to be loaded.

              The description above is an example of an option that  takes  an
              arbitrary string value (which happens to be a filename).  Again,
              the value in brackets show that the option is current set to the
              filename /tmp/input.ppm.

ENVIRONMENT

       SANE_DEFAULT_DEVICE
              The default device-name.

FILES

       /etc/sane.d
              This  directory holds various configuration files.  For details,
              please refer to the manual pages listed below.

       ~/.sane/pass
              This file contains lines of the form

              user:password:resource

              scanimage uses this information  to  answer  user  authorization
              requests  automatically.  The file must have 0600 permissions or
              stricter. You should use  this  file  in  conjunction  with  the
              --accept-md5-only  option  to  avoid  server-side  attacks.  The
              resource may  contain  any  character  but  is  limited  to  127
              characters.

SEE ALSO

       sane(7),    gamma4scanimage(1),   xscanimage(1),   xcam(1),   xsane(1),
       scanadf(1), sane-dll(5), sane-net(5), sane-"backendname"(5)

AUTHOR

       David Mosberger, Andreas Beck, Gordon Matzigkeit, Caskey  Dickson,  and
       many  others.   For  questions  and  comments  contact  the  sane-devel
       mailinglist (see http://www.sane-project.org/mailing-lists.html).

BUGS

       For vector options, the help output currently has no indication  as  to
       how many elements a vector-value should have.

                                  10 Jul 2008                     scanimage(1)