Provided by: xserver-xorg-video-nv_2.1.17-3ubuntu3_i386 bug

NAME

       nv - NVIDIA video driver

SYNOPSIS

       Section "Device"
         Identifier "devname"
         Driver "nv"
         ...
       EndSection

DESCRIPTION

       nv  is  an  Xorg driver for NVIDIA video cards.  The driver supports 2D
       acceleration and provides support for the following framebuffer depths:
       8,  15, 16 (except Riva128) and 24.  All visual types are supported for
       depth 8, TrueColor and DirectColor visuals are supported for the  other
       depths  with the exception of the Riva128 which only supports TrueColor
       in the higher depths.

SUPPORTED HARDWARE

       The nv driver supports PCI, PCI-Express and AGP video  cards  based  on
       the following NVIDIA chips:

       RIVA 128              NV3

       RIVA TNT              NV4

       RIVA TNT2             NV5

       GeForce 256, Quadro   NV10

       GeForce2, Quadro2     NV11 & NV15

       GeForce3, Quadro DCC  NV20

       nForce, nForce2       NV1A, NV1F

       GeForce4, Quadro4     NV17, NV18, NV25, NV28

       GeForce FX, Quadro FX NV30, NV31, NV34, NV35, NV36, NV37, NV38

       GeForce 6XXX          NV40, NV41, NV43, NV44, NV45, C51

       GeForce 7XXX          G70, G71, G72, G73, MCP6x

       GeForce 8XXX, GeForce 9XXX, nForce 7, GeForce G, ION
                             G8x, G9x, GT21x, MCP7x

       GeForce GTX           GT200

CONFIGURATION DETAILS

       Please  refer  to xorg.conf(5) for general configuration details.  This
       section only covers configuration details specific to this driver.

       The driver auto-detects the chipset type and the amount of video memory
       present for all chips.

       The following driver Options are supported for pre-G80 hardware:

       Option "HWCursor" "boolean"
              Enable or disable the HW cursor.  Default: on.

       Option "NoAccel" "boolean"
              Disable   or  enable  acceleration.   Default:  acceleration  is
              enabled.

       Option "UseFBDev" "boolean"
              Enable or disable use of an OS-specific fb interface (and is not
              supported  on all OSs).  See fbdevhw(4) for further information.
              Default: off.

       Option "CrtcNumber" "integer"
              Many graphics cards with NVIDIA chips have  two  video  outputs.
              The  driver  attempts  to  autodetect  which  one the monitor is
              connected to.  In the case that autodetection  picks  the  wrong
              one,  this  option  may  be  used to force usage of a particular
              output.  The options are "0" or "1".  Default: autodetected.

       Option "Dualhead" "boolean"
              Enables simple VBE-based dual head mode.   This  sets  the  same
              resolution  on both outputs and lays them out side-by-side.  The
              screens will be panned together  as  one  big  metamode  if  the
              virtual desktop is larger than both screens combined.

       Option "FlatPanel" "boolean"
              The driver usually can autodetect the presence of a digital flat
              panel.  In the case that this fails, this option can be used  to
              force  the driver to treat the attached device as a digital flat
              panel.  With this driver, a digital flat panel will work only if
              it  was  POSTed  by  the  BIOS,  that is, the computer must have
              booted to the panel.  If you have a dual head card you may  also
              need  to  set  the  option CrtcNumber described above.  Default:
              autodetected.

       Option "FPDither" "boolean"
              Many digital flat panels (particularly  ones  on  laptops)  have
              only  6  bits per component color resolution.  This option tells
              the driver to dither from 8 bits per component to 6  before  the
              flat panel truncates it.  Default: off.

       Option "FPScale" "boolean"
              Supported only on GeForce4 and newer chips, this option tells to
              the driver to scale lower resolutions up  to  the  flat  panel's
              native resolution.  Default: on.

       Option "Rotate" "CW"

       Option "Rotate" "CCW"
              Rotate  the display clockwise or counterclockwise.  This mode is
              unaccelerated.  Default: no rotation.

              Note: The Resize and Rotate extension will be  disabled  if  the
              Rotate "CW" or Rotate "CCW" options are used.

       Option "Rotate" "RandR"
              Enable  rotation  of  the  screen  using  the  Resize and Rotate
              extension.  This mode is unaccelerated.   Default:  no  rotation
              support.

       Option "ShadowFB" "boolean"
              Enable or disable use of the shadow framebuffer layer.  Default:
              off.

       The following driver Options are available for G80 and higher:

       Option "HWCursor" "boolean"
              Enable or disable the hardware cursor.  Default: on.

       Option "NoAccel" "boolean"
              Disable  or  enable  acceleration.   Default:  acceleration   is
              enabled.

       Option "AccelMethod" "string"
              Choose acceleration architecture, either "XAA" or "EXA".  XAA is
              the old but stable architecture.   EXA  is  newer  and  supports
              resizing  the desktop larger than it started out with RandR 1.2.
              If you choose to use EXA, you might also consider setting Option
              "MigrationHeuristic"  "greedy" to improve performance.  Default:
              XAA.

       Option "FPDither" "boolean"
              Enable or disable flat panel dithering  by  default.   Dithering
              can  also  be  enabled  or disabled using the RandR 1.2 "dither"
              output property.  Default: off.

       Option "AllowDualLinkModes" "boolean"
              Allow validation of dual-link  DVI  modes.   Not  all  GPUs  are
              configured at boot time to be able to handle dual-link modes, so
              they are disabled by default.

       The following RandR 1.2 properties are available for flat panels on G80
       and higher GPUs:

       dither Enable  or disable flat panel dithering.  Valid values: 0 (off),
              1 (on).

       scale  Control how the image is scaled to fit  the  flat  panel.   Note
              that some flat panels perform their own scaling, overriding this
              option.  "off" is not  valid  for  laptop  flat  panels  (LVDS).
              Valid  values:  "off", "aspect", "fill", and "center".  Default:
              "aspect".

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7), xrandr(1)

AUTHORS

       Authors include: David McKay, Jarno Paananen, Chas Inman, Dave Schmenk,
       Mark Vojkovich, Aaron Plattner

COPYRIGHT

       Copyright (c) 2003-2008,2010 NVIDIA Corporation

       Permission is hereby granted, free of charge, to any person obtaining a
       copy  of  this  software  and  associated  documentation   files   (the
       "Software"),  to  deal  in  the Software without restriction, including
       without limitation the rights to use,  copy,  modify,  merge,  publish,
       distribute,  sublicense,  and/or  sell  copies  of the Software, and to
       permit persons to whom the Software is furnished to do so,  subject  to
       the following conditions:

       The above copyright notice and this permission notice shall be included
       in all copies or substantial portions of the Software.

       THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
       OR   IMPLIED,   INCLUDING   BUT   NOT  LIMITED  TO  THE  WARRANTIES  OF
       MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND  NONINFRINGEMENT.
       IN  NO  EVENT  SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
       CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN  ACTION  OF  CONTRACT,
       TORT  OR  OTHERWISE,  ARISING  FROM,  OUT  OF OR IN CONNECTION WITH THE
       SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.