Provided by: elinks-lite_0.12~pre5-2ubuntu2_i386 bug

NAME

       elinks.conf - ELinks configuration file

SYNOPSIS

           set     <option> = <value>
           unset   <option>
           bind    "<keymap>" "<key>" = "<action>"
           include "<file>"

DESCRIPTION

       The elinks.conf file contains configuration information for ELinks. It
       can be used to configure the behaviour of ELinks in a wide variety of
       ways: protocol behaviour, keybindings, colors used for rendering and
       for the user interface.

       It is read at startup and saved only when requested. All options
       described in this document can be fully configured from within ELinks
       so no editing of elinks.conf is needed.

       Note that MIME-related options used for specifying handlers of various
       MIME types are NOT described in this document. Documentation for these
       options can be found at the ELinks homepage. Keybindings can also be
       specified in elinks.conf. This is described in elinkskeys(5).

SYNTAX

       The syntax of the configuration file is very simple. The elinks.conf
       file is a free-form ASCII text file. The file may contain extra tabs
       and newlines for formatting purposes. Keywords in the file are
       case-sensitive. Comments may be placed anywhere within the file (except
       within quotes). Comments begin with the # character and end at the end
       of the line.

EXAMPLES

       Some sample settings:

           # Use asynchronous DNS resolver?
           set connection.async_dns = 1
           # horizontal text margin.
           set document.browse.margin_width = 3
           # Default document codepage.
           set document.codepage.assume = "ISO-8859-1"
           # User defined protocol handlers
           set protocol.user.mailto.unix = "mutt %h -s \"%s\""

OPTIONS

       Generated using output from ELinks version 0.12pre5.

   bookmarks (Bookmarks)
       Bookmark options.

       bookmarks.file_format <num> (default: 0)
           File format for bookmarks (affects both reading and saving):

           ·   0 is the default native ELinks format

           ·   1 is XBEL universal XML bookmarks format

       bookmarks.folder_state [0|1] (default: 1)
           When saving bookmarks also store whether folders are expanded or
           not, so the look of the bookmark dialog is kept across ELinks
           sessions. If disabled all folders will appear unexpanded next time
           ELinks is run.

   config (Configuration system)
       Configuration handling options.

       config.comments <num> (default: 3)
           Amount of comments automatically written to the config file:

           ·   0 is no comments are written

           ·   1 is only the "blurb" (name+type) is written

           ·   2 is only the description is written

           ·   3 is full comments are written

       config.indentation <num> (default: 2)
           Shift width of one indentation level in the configuration file.
           Zero means that no indentation is performed at all when saving the
           configuration.

       config.saving_style <num> (default: 3)
           Determines what happens when you tell ELinks to save options:

           ·   0 is only values of current options are altered

           ·   1 is values of current options are altered and missing options
               are added at the end of the file

           ·   2 is the configuration file is rewritten from scratch

           ·   3 is values of current options are altered and missing options
               CHANGED during this ELinks session are added at the end of the
               file

       config.i18n [0|1] (default: 0)
           If set to 1, comments in the configuration file will be translated
           to the language used by UI. Note that if you have different
           language set in different terminals, the language used in the
           configuration file MAY be the same as on the terminal where you
           saved the file, but it should be generally considered
           unpredictable.

       config.saving_style_w [0|1] (default: 0)
           This is internal option used when displaying a warning about
           obsolete config.saving_style. You shouldn´t touch it.

       config.show_template [0|1] (default: 0)
           Show template options in autocreated trees in the options manager
           and save them to the configuration file.

   connection (Connections)
       Connection options.

       connection.async_dns [0|1] (default: 1)
           Whether to use asynchronous DNS resolving.

       connection.max_connections <num> (default: 10)
           Maximum number of concurrent connections.

       connection.max_connections_to_host <num> (default: 2)
           Maximum number of concurrent connections to a given host.

       connection.receive_timeout <num> (default: 120)
           Receive timeout (in seconds).

       connection.retries <num> (default: 3)
           Number of tries to establish a connection. Zero means try forever.

       connection.try_ipv4 [0|1] (default: 1)
           Whether to try to connect to a host over IPv4. Note that if
           connection.try_ipv6 is enabled too, it takes precedence. And better
           do not touch this at all unless you are sure what are you doing.

           Note that you can also force a given protocol to be used on a
           per-connection basis by using a URL in the style of e.g.
           http4://elinks.cz/.

       connection.try_ipv6 [0|1] (default: 1)
           Whether to try to connect to a host over IPv6.

           Note that you can also force a given protocol to be used on a
           per-connection basis by using a URL in the style of e.g.
           http6://elinks.cz/.

       connection.unrestartable_receive_timeout <num> (default: 600)
           Timeout for non-restartable connections (in seconds).

   connection.ssl (SSL)
       SSL options.

       connection.ssl.cert_verify [0|1] (default: 0)
           Verify the peer´s SSL certificate. Note that this needs extensive
           configuration of OpenSSL by the user.

   connection.ssl.client_cert (Client Certificates)
       X509 client certificate options.

       connection.ssl.client_cert.enable [0|1] (default: 0)
           Enable or not the sending of X509 client certificates to servers
           which request them.

       connection.ssl.client_cert.file <str> (default: "")
           The location of a file containing the client certificate and
           unencrypted private key in PEM format. If unset, the file pointed
           to by the X509_CLIENT_CERT variable is used instead.

   cookies (Cookies)
       Cookies options.

       cookies.accept_policy <num> (default: 2)
           Cookies accepting policy:

           ·   0 is accept no cookies

           ·   1 is ask for confirmation before accepting cookie

           ·   2 is accept all cookies

       cookies.max_age <num> (default: -1)
           Cookie maximum age (in days):

           ·   -1 is use cookie´s expiration date if any

           ·   0 is force expiration at the end of session, ignoring cookie´s
               expiration date

           ·   1+ is use cookie´s expiration date, but limit age to the given
               number of days

       cookies.paranoid_security [0|1] (default: 0)
           When enabled, we´ll require three dots in cookies domain for all
           non-international domains (instead of just two dots). Some
           countries have generic second level domains (eg. .com.pl, .co.uk)
           and allowing sites to set cookies for these generic domains could
           potentially be very bad. Note, it is off by default as it breaks a
           lot of sites.

       cookies.save [0|1] (default: 1)
           Whether cookies should be loaded from and saved to disk.

       cookies.resave [0|1] (default: 1)
           Save cookies after each change in cookies list? No effect when
           cookie saving (cookies.save) is off.

   document (Document)
       Document options.

   document.browse (Browsing)
       Document browsing options (mainly interactivity).

       document.browse.margin_width <num> (default: 3)
           Horizontal text margin.

       document.browse.refresh [0|1] (default: 1)
           Automatically follow document-specified refresh directives (´<meta>
           refresh´ tags). Web-page authors use these to instruct the browser
           to reload a document at a given interval or to load another page.
           Regardless of the value the refresh URI is accessible as a link.

           Use the document.browse.minimum_refresh_time to control the minimum
           number of seconds a refresh will wait.

       document.browse.minimum_refresh_time <num> (default: 1000)
           The minimum number of milliseconds that should pass before
           refreshing. If set to zero the document refresh time is used
           unchanged. It can fix going back in history for some sites that use
           refreshing with zero values.

       document.browse.table_move_order [0|1] (default: 0)
           Move by columns in table, instead of rows.

   document.browse.accesskey (Access keys)
       Options for handling of link access keys. An HTML document can use the
       ACCESSKEY attribute to assign an access key to an element. When an
       access key is pressed, the corresponding element will be given focus.

       document.browse.accesskey.auto_follow [0|1] (default: 0)
           Automatically follow a link or submit a form if appropriate
           accesskey is pressed – this is the standard behaviour, but it´s
           considered dangerous.

       document.browse.accesskey.display [0|1] (default: 0)
           Display access key in link info.

       document.browse.accesskey.priority <num> (default: 0)
           Priority of ´accesskey´ HTML attribute:

           ·   0 is first try all normal bindings; if it fails, check
               accesskey

           ·   1 is first try only frame bindings; if it fails, check
               accesskey

           ·   2 is first check accesskey (this can be dangerous)

   document.browse.forms (Forms)
       Options for handling of the forms interaction.

       document.browse.forms.auto_submit [0|1] (default: 1)
           Automagically submit a form when enter is pressed with a text field
           selected.

       document.browse.forms.confirm_submit [0|1] (default: 1)
           Ask for confirmation when submitting a form.

       document.browse.forms.input_size <num> (default: 20)
           Default form input size if none is specified.

       document.browse.forms.insert_mode [0|1] (default: 1)
           The setting for this option affects how key presses are handled
           when one selects a text-input form-field. When enabled, one must
           explicitly ´enter´ a selected text-field to edit it; this prevents
           text fields from capturing key presses, such as presses of a scroll
           key, when it is inadvertently selected. When disabled, key presses
           are always inserted into a selected text field.

       document.browse.forms.editor <str> (default: "")
           Path to the executable that ELinks should launch when the user
           requests to edit a textarea with an external editor.

           If this is blank, ELinks will use the value of the environmental
           variable $EDITOR. If $EDITOR is empty or not set, ELinks will then
           default to vi.

       document.browse.forms.show_formhist [0|1] (default: 0)
           Ask if a login form should be saved to file or not. This option
           only disables the dialog, already saved login forms are unaffected.

   document.browse.images (Images)
       Options for handling of images.

       document.browse.images.display_style <num> (default: 2)
           Display style for image tags when displayed:

           ·   0 means always display IMG

           ·   1 means always display filename

           ·   2 means display alt/title attribute if possible, IMG if not

           ·   3 means display alt/title attribute if possible, filename if
               not

       document.browse.images.filename_maxlen <num> (default: 0)
           Maximum length of image filename when displayed:

           ·   0 means always display full filename

           ·   1-500 means display filename with this maximal length; if it is
               longer, the middle is substituted by an asterisk

       document.browse.images.image_link_tagging <num> (default: 1)
           When to enclose image links:

           ·   0 means never

           ·   1 means never if alt or title are provided (old behavior)

           ·   2 means always

       document.browse.images.image_link_prefix <str> (default: "[")
           Prefix string to use to mark image links.

       document.browse.images.image_link_suffix <str> (default: "]")
           Suffix string to use to mark image links.

       document.browse.images.label_maxlen <num> (default: 0)
           Maximum length of image label (alt/title):

           ·   0 means always display full label

           ·   1-500 means display label with this maximal length; if it is
               longer, the middle is substituted by an asterisk

       document.browse.images.show_as_links [0|1] (default: 0)
           Display links to images without an alt attribute. If this option is
           off, these images are completely invisible.

       document.browse.images.show_any_as_links [0|1] (default: 1)
           Display links to any images in the document, regardless of them
           having an alt attribute or not. If this option is off, the alt
           attribute contents is shown, but as normal text, not selectable as
           a link.

   document.browse.links (Links)
       Options for handling of links to other documents.

       document.browse.links.color_dirs [0|1] (default: 1)
           Highlight links to directories in FTP and local directory listing.

       document.browse.links.numbering [0|1] (default: 0)
           Display numbers next to the links.

       document.browse.links.target_blank <num> (default: 0)
           Define how to handle links having target=_blank set:

           ·   0 means open link in current tab

           ·   1 means open link in new tab in foreground

           ·   2 means open link in new tab in background

           ·   3 means open link in new window

       document.browse.links.use_tabindex [0|1] (default: 1)
           Whether to navigate links using tabindex specified ordering. The
           TABINDEX attribute in HTML elements specifies the order in which
           links should receive focus when using the keyboard to navigate the
           document.

       document.browse.links.missing_fragment [0|1] (default: 1)
           Open a message box when document has no tag with given id.

       document.browse.links.number_keys_select_link <num> (default: 1)
           Number keys select links rather than specify command prefixes. This
           is a tristate:

           ·   0 means never

           ·   1 means if document.browse.links.numbering = 1

           ·   2 means always

       document.browse.links.warn_malicious [0|1] (default: 1)
           When following a link the user ID part of the URI is checked and if
           a maliciously crafted URI is detected a warning dialog will ask
           before following the link.

       document.browse.links.wraparound [0|1] (default: 0)
           When pressing ´down´ on the last link, jump to the first one, and
           vice versa.

   document.browse.links.active_link (Active link)
       Options for the active link.

       document.browse.links.active_link.enable_color [0|1] (default: 0)
           Enable use of the active link background and text color settings
           instead of the link colors from the document.

       document.browse.links.active_link.bold [0|1] (default: 0)
           Make the active link text bold.

       document.browse.links.active_link.invert [0|1] (default: 1)
           Invert the fore- and background color so the link stands out.

       document.browse.links.active_link.underline [0|1] (default: 0)
           Underline the active link.

   document.browse.links.active_link.colors (Colors)
       Active link colors.

       document.browse.links.active_link.colors.background <color|#rrggbb>
       (default: blue)
           Default background color.

       document.browse.links.active_link.colors.text <color|#rrggbb> (default:
       black)
           Default text color.

   document.browse.scrolling (Scrolling)
       Scrolling options.

       document.browse.scrolling.horizontal_extended [0|1] (default: 1)
           Whether to allow horizontal scrolling when the document does not
           extend off the screen. Useful for copy/paste operations.

       document.browse.scrolling.horizontal_step <num> (default: 8)
           Number of columns to scroll when a key bound to scroll-left or
           scroll-right is pressed and no prefix was given.

       document.browse.scrolling.margin <num> (default: 3)
           Size of the virtual margin – when you click inside of that margin,
           document scrolls in that direction.

       document.browse.scrolling.vertical_step <num> (default: 2)
           Number of lines to scroll when a key bound to scroll-up or
           scroll-down is pressed and no prefix was given.

   document.browse.search (Searching)
       Options for searching.

       document.browse.search.case [0|1] (default: 0)
           Whether the search should match the document text while maintaining
           case sensitivity.

       document.browse.search.regex <num> (default: 0)
           Enable searching with regular expressions:

           ·   0 for plain text searching

           ·   1 for basic regular expression searches

           ·   2 for extended regular expression searches

       document.browse.search.show_hit_top_bottom [0|1] (default: 1)
           Whether to show a dialog when the search hits the top or bottom of
           the document.

       document.browse.search.wraparound [0|1] (default: 1)
           Wrap around when searching. Currently only used for typeahead.

       document.browse.search.show_not_found <num> (default: 2)
           How to inform the user when nothing is matched:

           ·   0 means do nothing

           ·   1 means beep the terminal

           ·   2 means pop up message box

       document.browse.search.typeahead <num> (default: 0)
           Start typeahead searching when an unbound key is pressed without
           any modifiers. Note that most keys have default bindings, so this
           feature will not be useful unless you unbind them.

           ·   0 disables this feature; typeahead searching will only be used
               when you press a key bound to search-typeahead or similar

           ·   1 automatically starts typeahead searching thru link text

           ·   2 automatically starts typeahead searching thru all document
               text

   document.cache (Cache)
       Cache options.

       document.cache.cache_redirects [0|1] (default: 0)
           Cache even redirects sent by server (usually thru HTTP by a 302
           HTTP code and a Location header). This was the original behaviour
           for quite some time, but it causes problems in a situation very
           common to various web login systems – frequently, when accessing a
           certain location, they will redirect you to a login page if they
           don´t receive an auth cookie, the login page then gives you the
           cookie and redirects you back to the original page, but there you
           have already cached redirect back to the login page! If this option
           has value of 0, this malfunction is fixed, but occasionally you may
           get superfluous (depends on how you take it ;-) requests to the
           server. If this option has value of 1, experienced users can still
           workaround it by clever combination of usage of reload, jumping
           around in session history and hitting ctrl+enter.

           Note that this option is checked when retrieving the information
           from cache, not when saving it to cache – thus if you enable it,
           even previous redirects will be taken from cache instead of asking
           the server.

       document.cache.ignore_cache_control [0|1] (default: 1)
           Ignore Cache-Control and Pragma server headers. When set, the
           document is cached even with ´Cache-Control: no-cache´.

       document.cache.revalidation_interval <num> (default: -1)
           Period in seconds that a cache entry is considered to be
           up-to-date. When a document is loaded and this interval has elapsed
           since the document was initially loaded or most recently
           revalidated with the server, the server will be checked in case
           there is a more up-to-date version of the document.

           A value of -1 disables automatic revalidation.

   document.cache.format (Formatted documents)
       Format cache options.

       document.cache.format.size <num> (default: 5)
           Number of cached formatted pages. Do not get too generous here,
           ´formatted´ means that all the accompanying structures are kept in
           memory so that you get the cached document immediatelly, but these
           structures may take a lot – 2x the size of the HTML source is
           probably not unusual, but it can be even more if the document
           consists of a lot of short lines (padded right, if possible) and
           links and not much other markup. So if you set this to 256 and then
           you don´t like your ELinks eating 90M, don´t come complaining to
           us. ;-)

           Also note that the format cache itself is not counted to the memory
           cache size, but the HTML source of the formatted documents is
           always cached, even if it is over the memory cache size threshold.
           (Then of course no other documents can be cached.)

   document.cache.memory (Memory cache)
       Memory cache options.

       document.cache.memory.size <num> (default: 1048576)
           Memory cache size (in bytes).

   document.codepage (Charset)
       Charset options.

       document.codepage.assume <codepage> (default: System)
           Default document codepage. ´System´ stands for a codepage
           determined by a selected locale.

       document.codepage.force_assumed [0|1] (default: 0)
           Ignore charset info sent by server.

   document.colors (Default color settings)
       Default document color settings.

       document.colors.text <color|#rrggbb> (default: gray75)
           Default text color.

       document.colors.background <color|#rrggbb> (default: black)
           Default background color.

       document.colors.link <color|#rrggbb> (default: blue)
           Default link color.

       document.colors.vlink <color|#rrggbb> (default: yellow)
           Default visited link color.

       document.colors.image <color|#rrggbb> (default: darkolivegreen)
           Default image link color.

       document.colors.bookmark <color|#rrggbb> (default: hotpink)
           Default bookmarked link color.

       document.colors.dirs <color|#rrggbb> (default: yellow)
           Default directory color.

           See document.browse.links.color_dirs option.

       document.colors.increase_contrast [0|1] (default: 1)
           Increase the contrast between the foreground and background colors
           to ensure readability. For example it disallows dark colors on a
           black background. Note, this is different from ensuring the
           contrast with the ensure_contrast option.

       document.colors.ensure_contrast [0|1] (default: 1)
           Makes sure that the back- and foreground colors are never equal.

       document.colors.use_document_colors <num> (default: 2)
           Use colors specified in document:

           ·   0 is use always the default settings

           ·   1 is use document colors if available, except background

           ·   2 is use document colors, including background. This can mostly
               look very impressive, but some sites will appear really ugly.
               Note, that obviously if the background is not black, it will
               break the behaviour of transparency.

   document.css (Cascading Style Sheets)
       Options concerning how to use CSS for styling documents.

       document.css.enable [0|1] (default: 1)
           Enable adding of CSS style info to documents.

       document.css.import [0|1] (default: 1)
           When enabled any external style sheets that are imported from
           either CSS itself using the @import keyword or from the HTML using
           <link> tags in the document header will also be downloaded.

       document.css.stylesheet <str> (default: "")
           The path to the file containing the default user defined Cascading
           Style Sheet. It can be used to control the basic layout of HTML
           documents. The path is assumed to be relative to ELinks´ home
           directory.

           Leave as "" to use built-in document styling.

   document.download (Downloading)
       Options regarding files downloading and handling.

       document.download.directory <str> (default: "./")
           Default download directory.

       document.download.set_original_time [0|1] (default: 0)
           Set the timestamp of each downloaded file to the timestamp stored
           on the server.

       document.download.overwrite <num> (default: 2)
           Prevent overwriting the local files:

           ·   0 is files will silently be overwritten

           ·   1 is add a suffix .{number} (for example ´.1´) to the name

           ·   2 is ask the user

       document.download.notify_bell <num> (default: 0)
           Audio notification when download is completed:

           ·   0 is never

           ·   1 is when background notification is active

           ·   2 is always

   document.dump (Dump output)
       Dump output options.

       document.dump.codepage <codepage> (default: System)
           Codepage used in dump output. ´System´ stands for a codepage
           determined by a selected locale.

       document.dump.color_mode <num> (default: -1)
           Color mode for dumps.

           Some modes may have been disabled at compile time. The Setup ->
           Terminal options dialog lists the modes supported by this
           executable. If you select an unsupported mode, ELinks uses 16
           colors.

           The color modes are:

           ·   -1 is standard dump mode

           ·   0 is mono mode

           ·   1 is 16 color mode

           ·   2 is 88 color mode

           ·   3 is 256 color mode

           ·   4 is true color mode

       document.dump.footer <str> (default: "")
           Footer string used in dumps. %u is substituted by URL.

       document.dump.header <str> (default: "")
           Header string used in dumps. %u is substituted by URL.

       document.dump.numbering [0|1] (default: 1)
           Whether to print link numbers in dump output.

       document.dump.references [0|1] (default: 1)
           Whether to print references (URIs) of document links in dump
           output.

       document.dump.separator <str> (default: " ")
           String which separates two dumps.

       document.dump.width <num> (default: 80)
           Width of screen in characters when dumping documents.

   document.history (History)
       History options.

       document.history.keep_unhistory [0|1] (default: 1)
           Keep unhistory ("forward history").

   document.history.global (Global history)
       Global history options.

       document.history.global.enable [0|1] (default: 1)
           Enable global history ("history of all pages visited").

       document.history.global.max_items <num> (default: 1024)
           Maximum number of entries in the global history.

       document.history.global.display_type <num> (default: 0)
           What to display in global history dialog:

           ·   0 is URLs

           ·   1 is page titles

   document.html (HTML rendering)
       Options concerning the display of HTML pages.

       document.html.display_frames [0|1] (default: 1)
           Display frames.

       document.html.display_tables [0|1] (default: 1)
           Display tables.

       document.html.display_subs [0|1] (default: 1)
           Display subscripts (as [thing]).

       document.html.display_sups [0|1] (default: 1)
           Display superscripts (as ^thing).

       document.html.link_display <num> (default: 2)
           How to render <link> tags from the HTML header:

           ·   0 is nothing

           ·   1 is title

           ·   2 is name in addition

           ·   3 is hreflang in addition

           ·   4 is type in addition

           ·   5 is everything

       document.html.underline_links [0|1] (default: 0)
           Underline links.

       document.html.wrap_nbsp [0|1] (default: 0)
           If set do not honour non breaking space (the nbsp entity) but allow
           to wrap the text. This can help keeping the width of documents down
           so no horizontal scrolling is needed.

   document.plain (Plain rendering)
       Options concerning the display of plain text pages.

       document.plain.display_links [0|1] (default: 0)
           Display URIs in the document as links.

       document.plain.compress_empty_lines [0|1] (default: 0)
           Compress successive empty lines to only one in displayed text.

   document.uri_passing (URI passing)
       Rules for passing URIs to external commands. When one rule is defined
       the link and tab menu will have a menu item that makes it possible to
       pass the the link, frame or tab URI to an external command. If several
       rules are defined the link and tab menu will have a submenu of items
       for each rule.

       Note, this is mostly useful for launching graphical viewers, since
       there is no support for releasing the terminal while the command runs.
       The action and submenus are also available by binding keys to the
       frame-external-command, the link-external-command, and the
       tab-external-command actions.

       document.uri_passing._template_ <str> (default: "")
           A rule for passing URI to an external command. The format is:

           ·   %c in the string means the current URL

           ·   %% in the string means ´%´

               Do not put single- or double-quotes around %c.

   ecmascript (ECMAScript)
       ECMAScript options.

       ecmascript.enable [0|1] (default: 0)
           Whether to run those scripts inside of documents.

       ecmascript.error_reporting [0|1] (default: 0)
           Open a message box when a script reports an error.

       ecmascript.ignore_noscript [0|1] (default: 0)
           Whether to ignore content enclosed by the <noscript> tag when
           ECMAScript is enabled.

       ecmascript.max_exec_time <num> (default: 5)
           Maximum execution time in seconds for a script.

       ecmascript.block_window_opening [0|1] (default: 0)
           Whether to disallow scripts to open new windows or tabs.

   infofiles (Information files)
       Options for information files in ~/.elinks.

       infofiles.save_interval <num> (default: 300)
           Interval at which to trigger information files in ~/.elinks to be
           saved to disk if they have changed (seconds; 0 to disable)

       infofiles.secure_save [0|1] (default: 1)
           First write data to unique temporary file, then rename this file
           upon successfully finishing this. Note that this relates only to
           config files, not downloaded files. You may want to disable it if
           you are using some exotic permissions for concerned files. Secure
           file saving is automagically disabled if file is symlink.

           Warning: some systems (ie. OS/2, Win32) require that destination
           file doesn´t exist when rename(3) is called, breaking atomicity,
           and reducing reliability of this feature.

       infofiles.secure_save_fsync [0|1] (default: 1)
           When using secure file saving, call fsync(3), if the OS supports
           it, to force the OS immediately to write the data to permanent
           storage. This is optional for those who wish to avoid excessive
           disk I/O.

   mime (MIME)
       MIME-related options (handlers of various MIME types).

       mime.default_type <str> (default: "application/octet-stream")
           Document MIME-type to assume by default (when we are unable to
           guess it properly from known information about the document).

   mime.extension (File extension associations)
       Extension ↔ MIME type association.

       mime.extension._template_ <str> (default: "")
           MIME-type matching this file extension (´*´ is used here in place
           of ´.´).

   mime.handler (File type handlers)
       A file type handler is a set of information about how to use an
       external program to view a file. It is possible to refer to it for
       several MIME types — e.g., you can define an ´image´ handler to which
       mime.type.image.png, mime.type.image.jpeg, and so on will refer; or one
       might define a handler for a more specific type of file — e.g., PDF
       files. Note you must define both a MIME handler and a MIME type
       association for it to work.

   mime.handler._template_ (Template option folder)
       Description of this handler.

   mime.handler._template_._template_ (Template option folder)
       System-specific handler description (ie. unix, unix-xwin, ...).

       mime.handler._template_._template_.ask [0|1] (default: 1)
           Ask before opening.

       mime.handler._template_._template_.block [0|1] (default: 1)
           Block the terminal when the handler is running.

       mime.handler._template_._template_.program <str> (default: "")
           External viewer for this file type. ´%´ in this string will be
           substituted by a file name. Do not put single- or double-quotes
           around the % sign.

   mime.mailcap (Mailcap)
       Options for mailcap support.

       mime.mailcap.enable [0|1] (default: 1)
           Enable mailcap support.

       mime.mailcap.path <str> (default:
       "~/.mailcap:/etc/mailcap:/usr/local/etc/mailcap:/usr/share/mailcap:/usr/share/misc/mailcap")
           Mailcap search path. Colon-separated list of files. Leave as "" to
           use MAILCAP environment variable instead.

       mime.mailcap.ask [0|1] (default: 1)
           Ask before using the handlers defined by mailcap.

       mime.mailcap.description <num> (default: 0)
           Type of description to show in "what to do with this file" query
           dialog:

           ·   0 is show "mailcap"

           ·   1 is show program to be run

           ·   2 is show mailcap description field if any; "mailcap" otherwise

       mime.mailcap.prioritize [0|1] (default: 1)
           Prioritize entries by the order of the files in the mailcap path.
           This means that wildcard entries (like: image/*) will also be
           checked before deciding the handler.

   mime.mimetypes (Mimetypes files)
       Options for the support of mime.types files. These files can be used to
       find the content type of a URL by looking at the extension of the file
       name.

       mime.mimetypes.enable [0|1] (default: 1)
           Enable mime.types support.

       mime.mimetypes.path <str> (default:
       "~/.mime.types:/etc/mime.types:/usr/local/etc/mime.types:/usr/share/mime.types:/usr/share/misc/mime.types")
           The search path for mime.types files. Colon-separated list of
           files.

   mime.type (MIME type associations)
       Handler ↔ MIME type association. The first sub-tree is the MIME class
       while the second sub-tree is the MIME type (ie. image/gif handler will
       reside at mime.type.image.gif). Each MIME type option should contain
       (case-sensitive) name of the MIME handler (its properties are stored at
       mime.handler.<name>).

   mime.type._template_ (Template option folder)
       Handler matching this MIME-type class (´*´ is used here in place of
       ´.´).

       mime.type._template_._template_ <str> (default: "")
           Handler matching this MIME-type name (´*´ is used here in place of
           ´.´).

   protocol (Protocols)
       Protocol specific options.

       protocol.no_proxy <str> (default: "")
           Comma separated list of domains for which the proxy (HTTP/FTP)
           should be disabled. Optionally, a port can be specified for some
           domains as well. If it´s blank, NO_PROXY environment variable is
           checked as well.

   protocol.bittorrent (BitTorrent)
       BitTorrent specific options.

       protocol.bittorrent.piece_cache_size <num> (default: 1048576)
           The maximum amount of memory used to hold recently downloaded
           pieces.

           Set to 0 to have unlimited size.

       protocol.bittorrent.max_uploads <num> (default: 7)
           The maximum number of uploads to allow at once.

       protocol.bittorrent.min_uploads <num> (default: 2)
           The minimum number of uploads which should at least be used for new
           connections.

       protocol.bittorrent.request_queue_size <num> (default: 5)
           How many piece requests to continuously keep in queue. Pipelining
           of requests is essential to saturate connections and get a good
           connection performance and thus a faster download. However, a very
           big queue size can lead to wasting bandwidth near the end of the
           connection since remaining piece blocks will be requested from
           multiple peers.

       protocol.bittorrent.choke_interval <num> (default: 10)
           The number of seconds between updating the connection state and
           most importantly choke and unchoke peer connections. The choke
           period should be big enough for newly unchoked connections to get
           started but small enough to not allow freeriders too much room for
           stealing bandwidth.

       protocol.bittorrent.rarest_first_cutoff <num> (default: 4)
           The number of pieces to obtain before switching piece selection
           strategy from random to rarest first.

       protocol.bittorrent.allow_blacklist [0|1] (default: 1)
           Allow blacklisting of buggy peers.

   protocol.bittorrent.ports (Port range)
       Port range allowed to be used for listening on.

       protocol.bittorrent.ports.min <num> (default: 6881)
           The minimum port to try and listen on.

       protocol.bittorrent.ports.max <num> (default: 6999)
           The maximum port to try and listen on.

   protocol.bittorrent.tracker (Tracker)
       Tracker options.

       protocol.bittorrent.tracker.compact [0|1] (default: 0)
           Whether to request that the tracker returns peer info in compact
           format. Note, the compact format only supports IPv4 addresses.

       protocol.bittorrent.tracker.interval <num> (default: 0)
           The number of seconds to wait between periodically contacting the
           tracker for announcing progress and requesting more peers. Set to
           zero to use the interval requested by the tracker.

       protocol.bittorrent.tracker.ip_address <str> (default: "")
           What IP address to report to the tracker. If set to "" no IP
           address will be sent and the tracker will automatically determine
           an appropriate IP address.

       protocol.bittorrent.tracker.key <str> (default: "")
           An additional identification that is not shared with any users. It
           is intended to allow a client to prove their identity should their
           IP address change. It is an optional parameter, but some trackers
           require this parameter. If set to "" no user key will be sent to
           the tracker.

       protocol.bittorrent.tracker.numwant <num> (default: 50)
           The maximum number of peers to request from the tracker. Set to 0
           to use the server default.

       protocol.bittorrent.tracker.min_skip_size <num> (default: 20)
           The minimum number of peers to have in the current peer info pool
           before skipping requesting of more peers. I.e. setting numwant to
           zero. Set to 0 to not have any limit.

   protocol.bittorrent.peerwire (Peer-wire)
       Lowlevel peer-wire options.

       protocol.bittorrent.peerwire.connections <num> (default: 55)
           The maximum number of allowed connections to both active and
           non-active peers. By increasing the number of allowed connections,
           the chance of finding good peers to download from is increased.
           However, too many connections can lead to TCP congestion. If the
           maximum is reached all new incoming connections will be closed.

       protocol.bittorrent.peerwire.max_message_length <num> (default:
       8388608)
           The maximum length of messages to accept over the wire. Larger
           values will cause the connection to be dropped.

       protocol.bittorrent.peerwire.max_request_length <num> (default:
       8388608)
           The maximum length to allow for incoming requests. Larger requests
           will cause the connection to be dropped.

       protocol.bittorrent.peerwire.request_length <num> (default: 16384)
           How many bytes to query for per request. This is complementary to
           the max_request_length option. If the configured length is bigger
           than the piece length it will be truncated.

       protocol.bittorrent.peerwire.timeout <num> (default: 300)
           The number of seconds to wait before closing a socket on which
           nothing has been received or sent.

       protocol.bittorrent.peerwire.pool_size <num> (default: 55)
           Maximum number of items in the peer pool. The peer pool contains
           information used for establishing connections to new peers.

           Set to 0 to have unlimited size.

   protocol.file (Local files)
       Options specific to local browsing.

       protocol.file.allow_special_files [0|1] (default: 0)
           Whether to allow reading from non-regular files. Note this can be
           dangerous; reading /dev/urandom or /dev/zero can ruin your day!

       protocol.file.show_hidden_files [0|1] (default: 1)
           When set to false, files with name starting with a dot will be
           hidden in local directory listings.

       protocol.file.try_encoding_extensions [0|1] (default: 1)
           When set, if we can´t open a file named ´filename´, we´ll try to
           open ´filename´ with some encoding extension appended (ie.
           ´filename.gz´); it depends on the supported encodings.

   protocol.file.cgi (Local CGI)
       Local CGI specific options.

       protocol.file.cgi.path <str> (default: "")
           Colon separated list of directories, where CGI scripts are stored.

       protocol.file.cgi.policy [0|1] (default: 0)
           Whether to execute local CGI scripts.

   protocol.fsp (FSP)
       FSP specific options.

       protocol.fsp.sort [0|1] (default: 1)
           Whether to sort entries in directory listings.

   protocol.ftp (FTP)
       FTP specific options.

       protocol.ftp.anon_passwd <str> (default: "some@host.domain")
           FTP anonymous password to be sent.

       protocol.ftp.use_pasv [0|1] (default: 1)
           Use PASV instead of PORT (passive vs active mode, IPv4 only).

       protocol.ftp.use_epsv [0|1] (default: 0)
           Use EPSV instead of EPRT (passive vs active mode, IPv6 only).

   protocol.ftp.proxy (Proxy configuration)
       FTP proxy configuration.

       protocol.ftp.proxy.host <str> (default: "")
           Host and port-number (host:port) of the FTP proxy, or blank. If
           it´s blank, FTP_PROXY environment variable is checked as well.

   protocol.http (HTTP)
       HTTP-specific options.

       protocol.http.accept_language <str> (default: "")
           Send Accept-Language header.

       protocol.http.accept_ui_language [0|1] (default: 1)
           Request localised versions of documents from web-servers (using the
           Accept-Language header) using the language you have configured for
           ELinks´ user-interface (this also affects navigator.language
           ECMAScript value available to scripts). Note that some see this as
           a potential security risk because it tells web-masters and the FBI
           sniffers about your language preference.

       protocol.http.compression [0|1] (default: 0)
           If enabled, the capability to receive compressed content (gzip
           and/or bzip2) is announced to the server, which usually sends the
           reply compressed, thus saving some bandwidth at slight CPU expense.

           If ELinks displays a incomplete page or garbage, try disabling this
           option. If that helps, there may be a bug in the decompression part
           of ELinks. Please report such bugs.

           If ELinks has been compiled without compression support, this
           option has no effect. To check the supported features, see Help ->
           About.

       protocol.http.trace [0|1] (default: 0)
           If active, all HTTP requests are sent with TRACE as their method
           rather than GET or POST. This is useful for debugging of both
           ELinks and various server-side scripts — the server only returns
           the client´s request back to the client verbatim. Note that this
           type of request may not be enabled on all servers.

       protocol.http.user_agent <str> (default: "ELinks/%v (textmode; %s;
       %t-%b)")
           Change the User Agent ID. That means identification string, which
           is sent to HTTP server when a document is requested. The ´textmode´
           token in the first field is our silent attempt to establish this as
           a standard for new textmode user agents, so that the webmasters can
           have just a single uniform test for these if they are e.g. pushing
           some lite version to them automagically.

           Use " " if you don´t want any User-Agent header to be sent at all.

           ·   %v in the string means ELinks version,

           ·   %s in the string means system identification,

           ·   %t in the string means size of the terminal,

           ·   %b in the string means number of bars displayed by ELinks.

   protocol.http.bugs (Server bug workarounds)
       Server-side HTTP bugs workarounds.

       protocol.http.bugs.accept_charset [0|1] (default: 1)
           The Accept-Charset header is quite long and sending it can trigger
           bugs in some rarely found servers.

       protocol.http.bugs.allow_blacklist [0|1] (default: 1)
           Allow blacklisting of buggy servers.

       protocol.http.bugs.broken_302_redirect [0|1] (default: 1)
           Broken 302 redirect (violates RFC but compatible with Netscape).
           This is a problem for a lot of web discussion boards and the like.
           If they will do strange things to you, try to play with this.

       protocol.http.bugs.post_no_keepalive [0|1] (default: 0)
           Disable keepalive connection after POST request.

       protocol.http.bugs.http10 [0|1] (default: 0)
           Use HTTP/1.0 protocol instead of HTTP/1.1.

   protocol.http.proxy (Proxy configuration)
       HTTP proxy configuration.

       protocol.http.proxy.host <str> (default: "")
           Host and port-number (host:port) of the HTTP proxy, or blank. If
           it´s blank, HTTP_PROXY environment variable is checked as well.

       protocol.http.proxy.user <str> (default: "")
           Proxy authentication username.

       protocol.http.proxy.passwd <str> (default: "")
           Proxy authentication password.

   protocol.http.referer (Referer sending)
       HTTP referer sending options. HTTP referer is a special header sent in
       the HTTP requests, which is supposed to contain the previous page
       visited by the browser.This way, the server can know what link did you
       follow when accessing that page. However, this behaviour can
       unfortunately considerably affect privacy and can lead even to a
       security problem on some badly designed web pages.

       protocol.http.referer.policy <num> (default: 3)
           Mode of sending HTTP referer:

           ·   0 is send no referer

           ·   1 is send current URL as referer

           ·   2 is send fixed fake referer

           ·   3 is send previous URL as referer (correct, but insecure)

       protocol.http.referer.fake <str> (default: "")
           Fake referer to be sent when policy is 2.

   protocol.https (HTTPS)
       HTTPS-specific options.

   protocol.https.proxy (Proxy configuration)
       HTTPS proxy configuration.

       protocol.https.proxy.host <str> (default: "")
           Host and port-number (host:port) of the HTTPS CONNECT proxy, or
           blank. If it´s blank, HTTPS_PROXY environment variable is checked
           as well.

   protocol.nntp (NNTP)
       NNTP and news specific options.

       protocol.nntp.server <str> (default: "")
           Used when resolving news: URIs. If set to the empty string the
           value of the NNTPSERVER environment variable will be used.

       protocol.nntp.header_entries <str> (default:
       "Subject,From,Date,Message-ID,Newsgroups")
           Comma separated list of which entries in the article header to
           show. E.g. ´Subject´ and ´From´. All header entries can be read in
           the header info dialog.

   protocol.rewrite (URI rewriting)
       Rules for rewriting URIs entered in the goto dialog. It makes it
       possible to define a set of prefixes that will be expanded if they
       match a string entered in the goto dialog. The prefixes can be dumb,
       meaning that they work only like URI abbreviations, or smart ones,
       making it possible to pass arguments to them like search engine
       keywords.

       protocol.rewrite.default_template <str> (default: "")
           Default URI template used when the string entered in the goto
           dialog does not appear to be a URI or a filename (i.e. contains no
           ´.´, ´:´ or ´/´ characters), and does not match any defined
           prefixes. Set the value to "" to disable use of the default
           template rewrite rule.

           ·   %c in the template means the current URL,

           ·   %s in the template means the whole string from the goto dialog,

           ·   %0,%1,...,%9 mean the 1st,2nd,...,10th space-delimited part of
               %s,

           ·   %% in the template means ´%´.

       protocol.rewrite.enable-dumb [0|1] (default: 1)
           Enable dumb prefixes – simple URI abbreviations which can be
           written to the Goto URL dialog instead of actual URIs – i.e. if you
           write ´elinks´ there, you are directed to http://elinks.cz/.

       protocol.rewrite.enable-smart [0|1] (default: 1)
           Enable smart prefixes – URI templates triggered by writing given
           abbreviation to the Goto URL dialog followed by a list of arguments
           from which the actual URI is composed – i.e. ´gg:search keywords´
           or ´gn search keywords for news´.

   protocol.rewrite.dumb (Dumb Prefixes)
       Dumb prefixes, see enable-dumb description for details.

       protocol.rewrite.dumb._template_ <str> (default: "")
           Replacement URI for this dumbprefix:

           ·   %c in the string means the current URL

           ·   %% in the string means ´%´

   protocol.rewrite.smart (Smart Prefixes)
       Smart prefixes, see enable-smart description for details.

       protocol.rewrite.smart._template_ <str> (default: "")
           Replacement URI for this smartprefix:

           ·   %c in the string means the current URL

           ·   %s in the string means the whole argument to smartprefix

           ·   %0,%1,...,%9 means argument 0, 1, ..., 9

           ·   %% in the string means ´%´

   protocol.user (User protocols)
       User protocols. Options in this tree specify external handlers for the
       appropriate protocols. Ie. protocol.user.mailto.unix.

   protocol.user._template_ (Template option folder)
       Handler (external program) for this protocol. Name the options in this
       tree after your system (ie. unix, unix-xwin).

       protocol.user._template_._template_ <str> (default: "")
           Handler (external program) for this protocol and system.

           ·   %f in the string means file name to include form data from

           ·   %h in the string means hostname (or email address)

           ·   %p in the string means port

           ·   %d in the string means path (everything after the port)

           ·   %s in the string means subject (?subject=<this>)

           ·   %u in the string means the whole URL

   terminal (Terminals)
       Terminal options.

   terminal._template_ (Template option folder)
       Options specific to this terminal type (according to $TERM value).

       terminal._template_.type <num> (default: 0)
           Terminal type; matters mostly only when drawing frames and dialog
           box borders:

           ·   0 is dumb terminal type, ASCII art

           ·   1 is VT100, simple but portable

           ·   2 is Linux, you get double frames and other goodies

           ·   3 is KOI-8

           ·   4 is FreeBSD

       terminal._template_.latin1_title [0|1] (default: 1)
           When updating the window title of xterm or a similar terminal
           emulator, encode the title in ISO-8859-1 (Latin-1), rather than in
           the charset used for other text in the window. Cyrillic and other
           characters get replaced with Latin ones. Xterm requires this unless
           you explicitly enable UTF-8 titles in it.

           If this option does not take effect immediately, try switching to a
           different page so that ELinks notices it needs to update the title.

       terminal._template_.m11_hack [0|1] (default: 0)
           Switch fonts when drawing lines, enabling both local characters and
           lines working at the same time.  ELinks uses this option only if
           UTF-8 I/O is disabled and the terminal type is Linux or FreeBSD.

       terminal._template_.utf_8_io [0|1] (default: 0)
           Enable I/O in UTF-8 for Unicode terminals. Note that currently,
           only the subset of UTF-8 according to terminal codepage is used.
           ELinks ignores this option if the terminal codepage is UTF-8.

       terminal._template_.restrict_852 [0|1] (default: 0)
           Restrict the characters used when drawing lines. Makes sense only
           with linux terminals using the cp850/852 character sets.

       terminal._template_.block_cursor [0|1] (default: 0)
           Move cursor to bottom right corner when done drawing. This is
           particularly useful when we have a block cursor, so that inversed
           text is displayed correctly.

       terminal._template_.colors <num> (default: 0)
           The color mode controls what colors are used and how they are
           output to the terminal.

           Some modes may have been disabled at compile time. The Setup ->
           Terminal options dialog lists the modes supported by this
           executable. If you select an unsupported mode, ELinks uses 16
           colors.

           The color modes are:

           ·   0 is mono mode, only 2 colors are used

           ·   1 is 16 color mode, uses the common ANSI colors

           ·   2 is 88 color mode, uses XTerm RGB codes

           ·   3 is 256 color mode, uses XTerm RGB codes

           ·   4 is true color mode, uses konsole RGB codes

       terminal._template_.transparency [0|1] (default: 0)
           If we should not set the background to black. This is particularly
           useful when we have a terminal (typically in some windowing
           environment) with a background image or a transparent background –
           it will be visible in ELinks as well (but ELinks document color
           handling will still assume the background is black so if you have a
           bright background you might experience contrast problems). Note
           that this option makes sense only when colors are enabled.

       terminal._template_.underline [0|1] (default: 0)
           If we should use underline or enhance the color instead.

       terminal._template_.charset <codepage> (default: System)
           Codepage of charset used for displaying content on terminal.
           ´System´ stands for a codepage determined by a selected locale.

   ui (User interface)
       User interface options.

       ui.date_format <str> (default: "%b %e %H:%M")
           Date format to use in dialogs. See strftime(3).

       ui.language <language> (default: "System")
           Language of user interface. ´System´ means that the language will
           be extracted from the environment dynamically.

       ui.show_menu_bar_always [0|1] (default: 0)
           Always show menu bar on the screen.

       ui.show_status_bar [0|1] (default: 1)
           Show status bar on the screen.

       ui.show_title_bar [0|1] (default: 1)
           Show title bar on the screen.

       ui.startup_goto_dialog [0|1] (default: 1)
           Pop up goto dialog in newly created tabs when there´s no homepage
           set. This means also showing goto dialog on startup.

       ui.success_msgbox [0|1] (default: 1)
           When you pressed a Save button in some manager, this option will
           make sure that a box confirming success of the operation will pop
           up.

       ui.window_title [0|1] (default: 1)
           Set the window title when running in a windowing environment in an
           xterm-like terminal. This way the document´s title is shown on the
           window titlebar.

   ui.clock (Clock)
       Digital clock in the status bar.

       ui.clock.enable [0|1] (default: 0)
           Whether to display a digital clock in the status bar.

       ui.clock.format <str> (default: "[%H:%M]")
           Format string for the digital clock. See the strftime(3) manpage
           for details.

   ui.colors (Color settings)
       Default user interface color settings.

   ui.colors.color (Color terminals)
       Color settings for color terminal.

   ui.colors.color.mainmenu (Main menu bar)
       Main menu bar colors.

   ui.colors.color.mainmenu.normal (Unselected main menu bar item)
       Unselected main menu bar item colors.

       ui.colors.color.mainmenu.normal.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.mainmenu.normal.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.mainmenu.selected (Selected main menu bar item)
       Selected main menu bar item colors.

       ui.colors.color.mainmenu.selected.text <color|#rrggbb> (default: green)
           Default text color.

       ui.colors.color.mainmenu.selected.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.color.mainmenu.hotkey (Hotkey)
       Main menu hotkey colors.

   ui.colors.color.mainmenu.hotkey.normal (Unselected hotkey)
       Main menu unselected hotkey colors.

       ui.colors.color.mainmenu.hotkey.normal.text <color|#rrggbb> (default:
       darkred)
           Default text color.

       ui.colors.color.mainmenu.hotkey.normal.background <color|#rrggbb>
       (default: white)
           Default background color.

   ui.colors.color.mainmenu.hotkey.selected (Selected hotkey)
       Main menu selected hotkey colors.

       ui.colors.color.mainmenu.hotkey.selected.text <color|#rrggbb> (default:
       darkred)
           Default text color.

       ui.colors.color.mainmenu.hotkey.selected.background <color|#rrggbb>
       (default: green)
           Default background color.

   ui.colors.color.menu (Menu bar)
       Menu bar colors.

   ui.colors.color.menu.normal (Unselected menu item)
       Unselected menu item colors.

       ui.colors.color.menu.normal.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.menu.normal.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.color.menu.selected (Selected menu item)
       Selected menu item colors.

       ui.colors.color.menu.selected.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.menu.selected.background <color|#rrggbb> (default:
       green)
           Default background color.

   ui.colors.color.menu.marked (Marked menu item)
       Marked menu item colors.

       ui.colors.color.menu.marked.text <color|#rrggbb> (default: red)
           Default text color.

       ui.colors.color.menu.marked.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.color.menu.hotkey (Hotkey)
       Menu item hotkey colors.

   ui.colors.color.menu.hotkey.normal (Unselected hotkey)
       Menu item unselected hotkey colors.

       ui.colors.color.menu.hotkey.normal.text <color|#rrggbb> (default:
       darkred)
           Default text color.

       ui.colors.color.menu.hotkey.normal.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.menu.hotkey.selected (Selected hotkey)
       Menu item selected hotkey colors.

       ui.colors.color.menu.hotkey.selected.text <color|#rrggbb> (default:
       darkred)
           Default text color.

       ui.colors.color.menu.hotkey.selected.background <color|#rrggbb>
       (default: green)
           Default background color.

   ui.colors.color.menu.frame (Menu frame)
       Menu frame colors.

       ui.colors.color.menu.frame.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.menu.frame.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.color.dialog (Dialog)
       Dialog colors.

   ui.colors.color.dialog.generic (Generic)
       Generic dialog colors.

       ui.colors.color.dialog.generic.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.dialog.generic.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.dialog.frame (Frame)
       Dialog frame colors.

       ui.colors.color.dialog.frame.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.dialog.frame.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.dialog.scrollbar (Scrollbar)
       Scrollbar colors.

       ui.colors.color.dialog.scrollbar.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.dialog.scrollbar.background <color|#rrggbb> (default:
       blue)
           Default background color.

   ui.colors.color.dialog.scrollbar-selected (Selected scrollbar)
       Scrollbar selected colors.

       ui.colors.color.dialog.scrollbar-selected.text <color|#rrggbb>
       (default: black)
           Default text color.

       ui.colors.color.dialog.scrollbar-selected.background <color|#rrggbb>
       (default: green)
           Default background color.

   ui.colors.color.dialog.title (Title)
       Dialog title colors.

       ui.colors.color.dialog.title.text <color|#rrggbb> (default: darkred)
           Default text color.

       ui.colors.color.dialog.title.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.dialog.text (Text)
       Dialog text colors.

       ui.colors.color.dialog.text.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.dialog.text.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.color.dialog.checkbox (Checkbox)
       Dialog checkbox colors.

       ui.colors.color.dialog.checkbox.text <color|#rrggbb> (default: darkred)
           Default text color.

       ui.colors.color.dialog.checkbox.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.dialog.checkbox-selected (Selected checkbox)
       Dialog selected checkbox colors.

       ui.colors.color.dialog.checkbox-selected.text <color|#rrggbb> (default:
       yellow)
           Default text color.

       ui.colors.color.dialog.checkbox-selected.background <color|#rrggbb>
       (default: green)
           Default background color.

   ui.colors.color.dialog.checkbox-label (Checkbox label)
       Dialog checkbox label colors.

       ui.colors.color.dialog.checkbox-label.text <color|#rrggbb> (default:
       black)
           Default text color.

       ui.colors.color.dialog.checkbox-label.background <color|#rrggbb>
       (default: white)
           Default background color.

   ui.colors.color.dialog.button (Button)
       Dialog button colors.

       ui.colors.color.dialog.button.text <color|#rrggbb> (default: white)
           Default text color.

       ui.colors.color.dialog.button.background <color|#rrggbb> (default:
       blue)
           Default background color.

   ui.colors.color.dialog.button-selected (Selected button)
       Dialog selected button colors.

       ui.colors.color.dialog.button-selected.text <color|#rrggbb> (default:
       yellow)
           Default text color.

       ui.colors.color.dialog.button-selected.background <color|#rrggbb>
       (default: green)
           Default background color.

   ui.colors.color.dialog.button-shortcut (Button shortcut)
       Dialog button colors.

       ui.colors.color.dialog.button-shortcut.text <color|#rrggbb> (default:
       yellow)
           Default text color.

       ui.colors.color.dialog.button-shortcut.background <color|#rrggbb>
       (default: blue)
           Default background color.

   ui.colors.color.dialog.button-shortcut-selected (Selected button shortcut)
       Dialog selected button colors.

       ui.colors.color.dialog.button-shortcut-selected.text <color|#rrggbb>
       (default: white)
           Default text color.

       ui.colors.color.dialog.button-shortcut-selected.background
       <color|#rrggbb> (default: blue)
           Default background color.

   ui.colors.color.dialog.field (Text field)
       Dialog text field colors.

       ui.colors.color.dialog.field.text <color|#rrggbb> (default: white)
           Default text color.

       ui.colors.color.dialog.field.background <color|#rrggbb> (default: blue)
           Default background color.

   ui.colors.color.dialog.field-text (Text field text)
       Dialog field text colors.

       ui.colors.color.dialog.field-text.text <color|#rrggbb> (default:
       yellow)
           Default text color.

       ui.colors.color.dialog.field-text.background <color|#rrggbb> (default:
       blue)
           Default background color.

   ui.colors.color.dialog.meter (Meter)
       Dialog meter colors.

       ui.colors.color.dialog.meter.text <color|#rrggbb> (default: white)
           Default text color.

       ui.colors.color.dialog.meter.background <color|#rrggbb> (default: blue)
           Default background color.

   ui.colors.color.dialog.shadow (Shadow)
       Dialog shadow colors (see ui.shadows option).

       ui.colors.color.dialog.shadow.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.dialog.shadow.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.color.title (Title bar)
       Title bar colors.

   ui.colors.color.title.title-bar (Generic title bar)
       Generic title bar colors.

       ui.colors.color.title.title-bar.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.title.title-bar.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.title.title-text (Title bar text)
       Title bar text colors.

       ui.colors.color.title.title-text.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.title.title-text.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.status (Status bar)
       Status bar colors.

   ui.colors.color.status.status-bar (Generic status bar)
       Generic status bar colors.

       ui.colors.color.status.status-bar.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.status.status-bar.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.status.status-text (Status bar text)
       Status bar text colors.

       ui.colors.color.status.status-text.text <color|#rrggbb> (default:
       black)
           Default text color.

       ui.colors.color.status.status-text.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.tabs (Tabs bar)
       Tabs bar colors.

   ui.colors.color.tabs.unvisited (Unvisited tab)
       Tab colors for tabs that have not been selected since they completed
       loading.

       ui.colors.color.tabs.unvisited.text <color|#rrggbb> (default: darkblue)
           Default text color.

       ui.colors.color.tabs.unvisited.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.tabs.normal (Unselected tab)
       Unselected tab colors.

       ui.colors.color.tabs.normal.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.tabs.normal.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.color.tabs.loading (Loading tab)
       Tab colors for tabs that are loading in the background.

       ui.colors.color.tabs.loading.text <color|#rrggbb> (default: darkred)
           Default text color.

       ui.colors.color.tabs.loading.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.tabs.selected (Selected tab)
       Selected tab colors.

       ui.colors.color.tabs.selected.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.tabs.selected.background <color|#rrggbb> (default:
       green)
           Default background color.

   ui.colors.color.tabs.separator (Tab separator)
       Tab separator colors.

       ui.colors.color.tabs.separator.text <color|#rrggbb> (default: brown)
           Default text color.

       ui.colors.color.tabs.separator.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.color.searched (Searched strings)
       Searched string highlight colors.

       ui.colors.color.searched.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.color.searched.background <color|#rrggbb> (default: lime)
           Default background color.

   ui.colors.mono (Non-color terminals)
       Color settings for non-color terminal.

   ui.colors.mono.mainmenu (Main menu bar)
       Main menu bar colors.

   ui.colors.mono.mainmenu.normal (Unselected main menu bar item)
       Unselected main menu bar item colors.

       ui.colors.mono.mainmenu.normal.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.mainmenu.normal.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.mainmenu.selected (Selected main menu bar item)
       Selected main menu bar item colors.

       ui.colors.mono.mainmenu.selected.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.mainmenu.selected.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.mainmenu.hotkey (Hotkey)
       Main menu hotkey colors.

   ui.colors.mono.mainmenu.hotkey.normal (Unselected hotkey)
       Main menu unselected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.normal.text <color|#rrggbb> (default:
       black)
           Default text color.

       ui.colors.mono.mainmenu.hotkey.normal.background <color|#rrggbb>
       (default: white)
           Default background color.

   ui.colors.mono.mainmenu.hotkey.selected (Selected hotkey)
       Main menu selected hotkey colors.

       ui.colors.mono.mainmenu.hotkey.selected.text <color|#rrggbb> (default:
       black)
           Default text color.

       ui.colors.mono.mainmenu.hotkey.selected.background <color|#rrggbb>
       (default: white)
           Default background color.

   ui.colors.mono.menu (Menu bar)
       Menu bar colors.

   ui.colors.mono.menu.normal (Unselected menu item)
       Unselected menu item colors.

       ui.colors.mono.menu.normal.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.menu.normal.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.menu.selected (Selected menu item)
       Selected menu item colors.

       ui.colors.mono.menu.selected.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.menu.selected.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.menu.marked (Marked menu item)
       Marked menu item colors.

       ui.colors.mono.menu.marked.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.menu.marked.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.menu.hotkey (Hotkey)
       Menu item hotkey colors.

   ui.colors.mono.menu.hotkey.normal (Unselected hotkey)
       Menu item unselected hotkey colors.

       ui.colors.mono.menu.hotkey.normal.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.menu.hotkey.normal.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.menu.hotkey.selected (Selected hotkey)
       Menu item selected hotkey colors.

       ui.colors.mono.menu.hotkey.selected.text <color|#rrggbb> (default:
       gray)
           Default text color.

       ui.colors.mono.menu.hotkey.selected.background <color|#rrggbb>
       (default: black)
           Default background color.

   ui.colors.mono.menu.frame (Menu frame)
       Menu frame colors.

       ui.colors.mono.menu.frame.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.menu.frame.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.dialog (Dialog)
       Dialog colors.

   ui.colors.mono.dialog.generic (Generic)
       Generic dialog colors.

       ui.colors.mono.dialog.generic.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.dialog.generic.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.dialog.frame (Frame)
       Dialog frame colors.

       ui.colors.mono.dialog.frame.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.dialog.frame.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.dialog.scrollbar (Scrollbar)
       Scrollbar colors.

       ui.colors.mono.dialog.scrollbar.text <color|#rrggbb> (default: white)
           Default text color.

       ui.colors.mono.dialog.scrollbar.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.dialog.scrollbar-selected (Selected scrollbar)
       Scrollbar selected colors.

       ui.colors.mono.dialog.scrollbar-selected.text <color|#rrggbb> (default:
       black)
           Default text color.

       ui.colors.mono.dialog.scrollbar-selected.background <color|#rrggbb>
       (default: white)
           Default background color.

   ui.colors.mono.dialog.title (Title)
       Dialog title colors.

       ui.colors.mono.dialog.title.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.dialog.title.background <color|#rrggbb> (default: black)
           Default background color.

   ui.colors.mono.dialog.text (Text)
       Dialog text colors.

       ui.colors.mono.dialog.text.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.dialog.text.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.dialog.checkbox (Checkbox)
       Dialog checkbox colors.

       ui.colors.mono.dialog.checkbox.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.dialog.checkbox.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.dialog.checkbox-selected (Selected checkbox)
       Dialog selected checkbox colors.

       ui.colors.mono.dialog.checkbox-selected.text <color|#rrggbb> (default:
       white)
           Default text color.

       ui.colors.mono.dialog.checkbox-selected.background <color|#rrggbb>
       (default: black)
           Default background color.

   ui.colors.mono.dialog.checkbox-label (Checkbox label)
       Dialog checkbox label colors.

       ui.colors.mono.dialog.checkbox-label.text <color|#rrggbb> (default:
       black)
           Default text color.

       ui.colors.mono.dialog.checkbox-label.background <color|#rrggbb>
       (default: white)
           Default background color.

   ui.colors.mono.dialog.button (Button)
       Dialog button colors.

       ui.colors.mono.dialog.button.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.dialog.button.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.dialog.button-selected (Selected button)
       Dialog selected button colors.

       ui.colors.mono.dialog.button-selected.text <color|#rrggbb> (default:
       white)
           Default text color.

       ui.colors.mono.dialog.button-selected.background <color|#rrggbb>
       (default: black)
           Default background color.

   ui.colors.mono.dialog.button-shortcut (Button shortcut)
       Dialog button colors.

       ui.colors.mono.dialog.button-shortcut.text <color|#rrggbb> (default:
       white)
           Default text color.

       ui.colors.mono.dialog.button-shortcut.background <color|#rrggbb>
       (default: black)
           Default background color.

   ui.colors.mono.dialog.button-shortcut-selected (Selected button shortcut)
       Dialog selected button colors.

       ui.colors.mono.dialog.button-shortcut-selected.text <color|#rrggbb>
       (default: black)
           Default text color.

       ui.colors.mono.dialog.button-shortcut-selected.background
       <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.dialog.field (Text field)
       Dialog text field colors.

       ui.colors.mono.dialog.field.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.dialog.field.background <color|#rrggbb> (default: black)
           Default background color.

   ui.colors.mono.dialog.field-text (Text field text)
       Dialog field text colors.

       ui.colors.mono.dialog.field-text.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.dialog.field-text.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.dialog.meter (Meter)
       Dialog meter colors.

       ui.colors.mono.dialog.meter.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.dialog.meter.background <color|#rrggbb> (default: black)
           Default background color.

   ui.colors.mono.dialog.shadow (Shadow)
       Dialog shadow colors (see ui.shadows option).

       ui.colors.mono.dialog.shadow.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.dialog.shadow.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.title (Title bar)
       Title bar colors.

   ui.colors.mono.title.title-bar (Generic title bar)
       Generic title bar colors.

       ui.colors.mono.title.title-bar.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.title.title-bar.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.title.title-text (Title bar text)
       Title bar text colors.

       ui.colors.mono.title.title-text.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.title.title-text.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.status (Status bar)
       Status bar colors.

   ui.colors.mono.status.status-bar (Generic status bar)
       Generic status bar colors.

       ui.colors.mono.status.status-bar.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.status.status-bar.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.status.status-text (Status bar text)
       Status bar text colors.

       ui.colors.mono.status.status-text.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.status.status-text.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.tabs (Tabs bar)
       Tabs bar colors.

   ui.colors.mono.tabs.unvisited (Unvisited tab)
       Tab colors for tabs that have not been selected since they completed
       loading.

       ui.colors.mono.tabs.unvisited.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.tabs.unvisited.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.tabs.normal (Unselected tab)
       Unselected tab colors.

       ui.colors.mono.tabs.normal.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.tabs.normal.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.tabs.loading (Loading tab)
       Tab colors for tabs that are loading in the background.

       ui.colors.mono.tabs.loading.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.tabs.loading.background <color|#rrggbb> (default: white)
           Default background color.

   ui.colors.mono.tabs.selected (Selected tab)
       Selected tab colors.

       ui.colors.mono.tabs.selected.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.tabs.selected.background <color|#rrggbb> (default:
       black)
           Default background color.

   ui.colors.mono.tabs.separator (Tab separator)
       Tab separator colors.

       ui.colors.mono.tabs.separator.text <color|#rrggbb> (default: gray)
           Default text color.

       ui.colors.mono.tabs.separator.background <color|#rrggbb> (default:
       white)
           Default background color.

   ui.colors.mono.searched (Searched strings)
       Searched string highlight colors.

       ui.colors.mono.searched.text <color|#rrggbb> (default: black)
           Default text color.

       ui.colors.mono.searched.background <color|#rrggbb> (default: white)
           Default background color.

   ui.dialogs (Dialog settings)
       Dialogs-specific appearance and behaviour settings.

       ui.dialogs.listbox_min_height <num> (default: 10)
           Minimal height of the listbox widget (used e.g. for bookmarks or
           global history).

       ui.dialogs.shadows [0|1] (default: 0)
           Make dialogs drop shadows (the shadows are solid, you can adjust
           their color by ui.colors.*.dialog.shadow). You may also want to
           eliminate the wide borders by adjusting setup.h.

       ui.dialogs.underline_hotkeys [0|1] (default: 0)
           Whether to underline hotkeys in menus to make them more visible.
           Requires that underlining is enabled for the terminal.

       ui.dialogs.underline_button_shortcuts [0|1] (default: 0)
           Whether to underline button shortcuts to make them more visible.
           Requires that underlining is enabled for the terminal.

   ui.leds (LEDs)
       LEDs (visual indicators) options.

       ui.leds.enable [0|1] (default: 0)
           Enable LEDs. These visual indicators will inform you about various
           states.

   ui.sessions (Sessions)
       Sessions settings.

       ui.sessions.auto_restore [0|1] (default: 0)
           Automatically restore the session at start.

           This feature requires bookmark support.

       ui.sessions.auto_save [0|1] (default: 0)
           Automatically save the session when quitting.

           This feature requires bookmark support.

       ui.sessions.auto_save_foldername <str> (default: "Auto saved session")
           Name of the bookmarks folder used for auto saving and restoring
           session. The name has to be unique. Any folders with the same name
           will be deleted.

           This only makes sense with bookmark support.

       ui.sessions.homepage <str> (default: "")
           The URI to load either at startup time when no URI was given on the
           command line or when requested by the goto-url-home action. Set to
           "" if the environment variable WWW_HOME should be used as homepage
           URI instead.

       ui.sessions.keep_session_active [0|1] (default: 0)
           Keep the session active even if the last terminal exits.

       ui.sessions.snapshot [0|1] (default: 0)
           Automatically save a snapshot of all tabs periodically. This will
           periodically bookmark the tabs of each terminal in a separate
           folder for recovery after a crash.

           This feature requires bookmark support.

   ui.tabs (Window tabs)
       Window tabs settings.

       ui.tabs.show_bar <num> (default: 1)
           Show tabs bar on the screen:

           ·   0 means never

           ·   1 means only if two or more tabs are open

           ·   2 means always

       ui.tabs.top [0|1] (default: 0)
           Whether display tab bar at top like other browsers do.

       ui.tabs.wraparound [0|1] (default: 1)
           When moving right from the last tab, jump to the first one, and
           vice versa.

       ui.tabs.confirm_close [0|1] (default: 0)
           When closing a tab show confirmation dialog.

   ui.timer (Timer options)
       Timed action after certain interval of user inactivity. Someone can
       even find this useful, although you may not believe that.

       ui.timer.enable <num> (default: 0)
           Whether to enable the timer or not:

           ·   0 is don´t count down anything

           ·   1 is count down, but don´t show the timer

           ·   2 is count down and show the timer near LEDs

       ui.timer.duration <num> (default: 86400)
           Inactivity timeout in seconds. The maximum of one day should be
           enough for just everyone (TM).

       ui.timer.action <str> (default: "")
           Keybinding action to be triggered when timer reaches zero.

SEE ALSO

       elinks(1), elinkskeys(5)