Provided by: amanda-server_3.1.0-1_i386 bug


       amtape - Control Amanda changers


       amtape config subcommand [subcommand_options...] [{-o configoption}...]


       Amtape is the command-line interface to Amanda┬┤s tape changers (amanda-
       changers(7)) and to the taperscan algorithm (amanda-taperscan(7)).

       Tape changers maintain a notion of the current slot for each
       configuration. This may or may not correspond to an actual physical
       state of the device, but is used by some taperscan algorithms to
       minimize searching through the slots.

       Amtape uses the default changer. To use a different changer, use the
       config override option, e.g., -otpchanger=otherchanger.


       label label
           Search for and load the Amanda tape with label [label], also
           setting the current slot.

       slot slot
           Load the volume in the given slot, also setting the current slot.
           The slot names current, next, first, and last have special meaning.

           Shorthand for slot current.

           Show the contents of all slots, based on the changer┬┤s cached
           metadata. This is a quick operation as it does not load or unload
           any volumes, but is not supported by all changers.

           Show the contents of all slots by loading each slot and reading its
           label. This can be very slow.

           Reset the changer to a known state. This subcommand is intended to
           clear any unknown and potentially incorrect state the changer may
           have stored.

       eject [drive]
           Eject the tape currently in the drive. This only applies to some
           changers. Specify a drive (by drive number) if more than one drive
           is available.

       clean [drive]
           If a cleaning tape is defined for the changer, used it to clean the
           specified drive. The [drive] is optional if the changer only has
           one drive.

           Run the taperscan algorithm (see amanda-taperscan(7)), displaying
           information about the progress of the scan.

       update [what]
           Update changer state. Consult amanda-changers(7) for
           changer-specific details on the format of what.

       -o configoption
           See the "CONFIGURATION OVERRIDE" section in amanda(8).


       amanda(8), amanda-changers(7), amanda-taperscan(7), amanda-devices(7)

       The Amanda Wiki: :


       Dustin J. Mitchell <>
           Zmanda, Inc. (

       James da Silva <>

       Stefan G. Weichinger <>