Provided by: dpkg_1.16.0~ubuntu7_i386 bug

NAME

       dpkg - package manager for Debian

SYNOPSIS

       dpkg [options] action

WARNING

       This  manual is intended for users wishing to understand dpkg's command
       line options and package states in more detail than  that  provided  by
       dpkg --help.

       It  should not be used by package maintainers wishing to understand how
       dpkg will install their packages. The descriptions of  what  dpkg  does
       when installing and removing packages are particularly inadequate.

DESCRIPTION

       dpkg  is  a  tool to install, build, remove and manage Debian packages.
       The primary and more user-friendly front-end for dpkg  is  aptitude(1).
       dpkg  itself  is controlled entirely via command line parameters, which
       consist of exactly one action and zero or  more  options.  The  action-
       parameter tells dpkg what to do and options control the behavior of the
       action in some way.

       dpkg can also be used as a front-end to dpkg-deb(1).  The following are
       dpkg-deb  actions, and if they are encountered, dpkg just runs dpkg-deb
       with the parameters given to it:
           -b, --build,
           -c, --contents,
           -I, --info,
           -f, --field,
           -e, --control,
           -x, --extract,
           -X, --vextract, and
           --fsys-tarfile.
       Please refer to dpkg-deb(1) for information about these actions.

INFORMATION ABOUT PACKAGES

       dpkg maintains some usable information about  available  packages.  The
       information  is  divided in three classes: states, selection states and
       flags. These values are intended to be changed mainly with dselect.

   PACKAGE STATES
       not-installed
              The package is not installed on your system.

       config-files
              Only the configuration files of the package exist on the system.

       half-installed
              The installation of  the  package  has  been  started,  but  not
              completed for some reason.

       unpacked
              The package is unpacked, but not configured.

       half-configured
              The  package is unpacked and configuration has been started, but
              not yet completed for some reason.

       triggers-awaited
              The package awaits trigger processing by another package.

       triggers-pending
              The package has been triggered.

       installed
              The package is unpacked and configured OK.

   PACKAGE SELECTION STATES
       install
              The package is selected for installation.

       hold   A package marked to be on hold is not handled  by  dpkg,  unless
              forced to do that with option --force-hold.

       deinstall
              The  package  is  selected  for  deinstallation (i.e. we want to
              remove all files, except configuration files).

       purge  The package is selected to be purged (i.e.  we  want  to  remove
              everything from system directories, even configuration files).

   PACKAGE FLAGS
       reinst-required
              A   package   marked  reinst-required  is  broken  and  requires
              reinstallation. These packages cannot be removed, unless  forced
              with option --force-remove-reinstreq.

ACTIONS

       -i, --install package_file...
              Install  the  package. If --recursive or -R option is specified,
              package_file must refer to a directory instead.

              Installation consists of the following steps:

              1. Extract the control files of the new package.

              2. If another version of the same package was  installed  before
              the new installation, execute prerm script of the old package.

              3. Run preinst script, if provided by the package.

              4.  Unpack  the  new files, and at the same time back up the old
              files, so that if something goes wrong, they can be restored.

              5. If another version of the same package was  installed  before
              the  new  installation,  execute  the  postrm  script of the old
              package. Note that this script is  executed  after  the  preinst
              script  of the new package, because new files are written at the
              same time old files are removed.

              6.  Configure  the  package.  See   --configure   for   detailed
              information about how this is done.

       --unpack package_file...
              Unpack the package, but don't configure it. If --recursive or -R
              option is specified, package_file  must  refer  to  a  directory
              instead.

       --configure package...|-a|--pending
              Configure  a  package  which  has  been  unpacked  but  not  yet
              configured.  If -a or --pending is given instead of package, all
              unpacked but unconfigured packages are configured.

              To  reconfigure a package which has already been configured, try
              the dpkg-reconfigure(8) command instead.

              Configuring consists of the following steps:

              1. Unpack the conffiles, and at the same time back  up  the  old
              conffiles, so that they can be restored if something goes wrong.

              2. Run postinst script, if provided by the package.

       --triggers-only package...|-a|--pending
              Processes only triggers. All pending triggers will be processed.
              If package names are supplied only those packages' triggers will
              be  processed,  exactly  once  each where necessary. Use of this
              option may leave packages in the improper  triggers-awaited  and
              triggers-pending  states.  This  can  be fixed later by running:
              dpkg --configure --pending.

       -r, --remove, -P, --purge package...|-a|--pending
              Remove an installed package. -r or  --remove  remove  everything
              except  conffiles.  This  may  avoid  having  to reconfigure the
              package if it is reinstalled later. (Conffiles are configuration
              files  that are listed in the DEBIAN/conffiles control file). -P
              or --purge removes everything, including  conffiles.  If  -a  or
              --pending  is given instead of a package name, then all packages
              unpacked,  but  marked  to  be  removed  or   purged   in   file
              /var/lib/dpkg/status, are removed or purged, respectively. Note:
              some configuration files might be unknown to dpkg  because  they
              are  created  and  handled  separately through the configuration
              scripts. In that case, dpkg won't remove them by itself, but the
              package's  postrm  script (which is called by dpkg), has to take
              care of their removal during purge. Of course, this only applies
              to  files in system directories, not configuration files written
              to individual users' home directories.

              Removing of a package consists of the following steps:

              1. Run prerm script

              2. Remove the installed files

              3. Run postrm script

       --update-avail, --merge-avail Packages-file
              Update  dpkg's  and  dselect's  idea  of  which   packages   are
              available.   With   action  --merge-avail,  old  information  is
              combined  with  information  from  Packages-file.  With   action
              --update-avail, old information is replaced with the information
              in the Packages-file. The Packages-file distributed with  Debian
              is  simply  named  Packages.  dpkg keeps its record of available
              packages in /var/lib/dpkg/available.

              A simpler one-shot command to retrieve and update the  available
              file is dselect update. Note that this file is mostly useless if
              you don't use dselect but an APT-based frontend: APT has its own
              system to keep track of available packages.

       -A, --record-avail package_file...
              Update  dpkg  and dselect's idea of which packages are available
              with information from the package package_file.  If  --recursive
              or  -R  option  is  specified,  package_file  must  refer  to  a
              directory instead.

       --forget-old-unavail
              Now obsolete and a  no-op  as  dpkg  will  automatically  forget
              uninstalled unavailable packages.

       --clear-avail
              Erase   the   existing   information  about  what  packages  are
              available.

        -C, --audit
              Searches for packages that have been installed only partially on
              your  system. dpkg will suggest what to do with them to get them
              working.

       --get-selections [package-name-pattern...]
              Get list of package selections, and write it to stdout.  Without
              a  pattern,  non-installed  packages (i.e. those which have been
              previously purged) will not be shown.

       --set-selections
              Set package selections using file read  from  stdin.  This  file
              should  be in the format '<package> <state>', where state is one
              of install, hold, deinstall or purge. Blank  lines  and  comment
              lines beginning with '#' are also permitted.

       --clear-selections
              Set  the  requested  state  of  every  non-essential  package to
              deinstall.  This is  intended  to  be  used  immediately  before
              --set-selections, to deinstall any packages not in list given to
              --set-selections.

       --yet-to-unpack
              Searches for packages selected for installation, but  which  for
              some reason still haven't been installed.

       --print-architecture
              Print   architecture   of  packages  dpkg  installs  (for
              example, "i386").

       --foreign-architecture architecture
              Add architecture to the list of architectures  for  which
              packages     can     be     installed    without    using
              --force-architecture, in  addition  to  the  architecture
              dpkg    is    built    for    (i.e.:    the   output   of
              --print-architecture).

       --print-foreign-architectures
              Print a space-separated list of the  extra  architectures
              dpkg is configured to allow packages to be installed for.

       --compare-versions ver1 op ver2
              Compare  version  numbers, where op is a binary operator.
              dpkg returns  success  (zero  result)  if  the  specified
              condition  is  satisfied,  and  failure  (nonzero result)
              otherwise. There  are  two  groups  of  operators,  which
              differ  in  how  they  treat an empty ver1 or ver2. These
              treat an empty version as earlier than any version: lt le
              eq  ne  ge gt. These treat an empty version as later than
              any version: lt-nl le-nl ge-nl gt-nl. These are  provided
              only  for compatibility with control file syntax: < << <=
              = >= >> >.

       --command-fd <n>
              Accept a series of commands on input file descriptor <n>.
              Note:  additional  options  set  on the command line, and
              through  this  file  descriptor,  are   not   reset   for
              subsequent commands executed during the same run.

       --help Display a brief help message.

       --force-help
              Give help about the --force-thing options.

       -Dh, --debug=help
              Give help about debugging options.

       --version
              Display dpkg version information.

       dpkg-deb actions
              See  dpkg-deb(1) for more information about the following
              actions.

              -b, --build directory [archive|directory]
                  Build a deb package.
              -c, --contents archive
                  List contents of a deb package.
              -e, --control filename [directory]
                  Extract control-information from a package.
              -x, --extract archive directory
                  Extract the files contained by package.
              -X, --vextract archive directory
                  Extract and display the filenames contained by a
                  package.
              -f, --field  archive [control-field...]
                  Display control field(s) of a package.
              --fsys-tarfile archive
                  Display the filesystem tar-file contained by a
                  Debian package.
              -I, --info archive [control-file...]
                  Show information about a package.

       dpkg-query actions
              See  dpkg-query(1)  for  more   information   about   the
              following actions.

              -l, --list package-name-pattern...
                  List packages matching given pattern.
              -s, --status package-name...
                  Report status of specified package.
              -L, --listfiles package-name...
                  List files installed to your system from package-name.
              -S, --search filename-search-pattern...
                  Search for a filename from installed packages.
              -p, --print-avail package-name...
                  Display details about package-name, as found in
                  /var/lib/dpkg/available. Users of APT-based frontends
                  should use apt-cache show package-name instead.

OPTIONS

       All options can be specified both on the command line and in the
       dpkg configuration file /etc/dpkg/dpkg.cfg or the files  on  the
       configuration  directory /etc/dpkg/dpkg.cfg.d/. Each line in the
       configuration file is either an option (exactly the same as  the
       command line option but without leading dashes) or a comment (if
       it starts with a #).

       --abort-after=number
              Change after how many errors dpkg will abort. The default
              is 50.

       -B, --auto-deconfigure
              When  a  package  is removed, there is a possibility that
              another  installed  package  depended  on   the   removed
              package.  Specifying  this  option  will  cause automatic
              deconfiguration of the  package  which  depended  on  the
              removed package.

       -Doctal, --debug=octal
              Switch  debugging  on.  octal is formed by bitwise-orring
              desired values together from the list  below  (note  that
              these  values  may  change  in  future  releases). -Dh or
              --debug=help display these debugging values.

                  Number   Description
                       1   Generally helpful progress information
                       2   Invocation and status of maintainer scripts
                      10   Output for each file processed
                     100   Lots of output for each file processed
                      20   Output for each configuration file
                     200   Lots of output for each configuration file
                      40   Dependencies and conflicts
                     400   Lots of dependencies/conflicts output
                   10000   Trigger activation and processing
                   20000   Lots of output regarding triggers
                   40000   Silly amounts of output regarding triggers
                    1000   Lots of drivel about e.g. the dpkg/info dir
                    2000   Insane amounts of drivel

       --force-things, --no-force-things, --refuse-things

              Force or refuse (no-force and refuse mean the same thing)
              to  do  some  things. things is a comma separated list of
              things specified below. --force-help displays  a  message
              describing  them.   Things  marked with (*) are forced by
              default.

              Warning: These options are mostly intended to be used  by
              experts  only.  Using  them  without  fully understanding
              their effects may break your whole system.

              all: Turns on (or off) all force options.

              downgrade(*): Install a package, even if newer version of
              it is already installed.

              Warning:  At  present  dpkg  does  not  do any dependency
              checking on downgrades and therefore will not warn you if
              the   downgrade  breaks  the  dependency  of  some  other
              package. This can have serious side effects,  downgrading
              essential  system  components  can  even  make your whole
              system unusable. Use with care.

              configure-any:   Configure   also   any   unpacked    but
              unconfigured   packages  on  which  the  current  package
              depends.

              hold: Process packages even when marked "hold".

              remove-reinstreq: Remove a package, even if  it's  broken
              and  marked  to  require  reinstallation.  This  may, for
              example, cause parts of the  package  to  remain  on  the
              system, which will then be forgotten by dpkg.

              remove-essential:   Remove,   even   if  the  package  is
              considered essential. Essential packages  contain  mostly
              very  basic  Unix commands. Removing them might cause the
              whole system to stop working, so use with caution.

              depends: Turn all dependency problems into warnings.

              depends-version: Don't care about versions when  checking
              dependencies.

              breaks:   Install,  even  if  this  would  break  another
              package.

              conflicts: Install, even if  it  conflicts  with  another
              package.  This  is  dangerous,  for it will usually cause
              overwriting of some files.

              confmiss: Always install  a  missing  conffile.  This  is
              dangerous,   since  it  means  not  preserving  a  change
              (removing) made to the file.

              confnew: If a conffile has been modified  always  install
              the   new   version   without   prompting,   unless   the
              --force-confdef is also  specified,  in  which  case  the
              default action is preferred.

              confold:  If a conffile has been modified always keep the
              old version without prompting, unless the --force-confdef
              is  also  specified,  in which case the default action is
              preferred.

              confdef: If a conffile has been  modified  always  choose
              the default action. If there is no default action it will
              stop  to  ask  the   user   unless   --force-confnew   or
              --force-confold is also been given, in which case it will
              use that to decide the final action.

              confask: If a conffile has been modified always offer  to
              replace  it  with the version in the package, even if the
              version  in  the  package  did  not  change.  If  any  of
              --force-confmiss,  --force-confnew,  --force-confold,  or
              --force-confdef is also given, it will be used to  decide
              the final action.

              overwrite:  Overwrite  one  package's file with another's
              file.

              overwrite-dir  Overwrite  one  package's  directory  with
              another's file.

              overwrite-diverted:  Overwrite  a  diverted  file with an
              undiverted version.

              unsafe-io:  Do  not  perform  safe  I/O  operations  when
              unpacking.  Currently  this  implies  not performing file
              system syncs before file renames, which is known to cause
              substantial performance degradation on some file systems,
              unfortunately the ones that require the safe I/O  on  the
              first  place  due  to  their unreliable behaviour causing
              zero-length files on abrupt system crashes.

              Note: For ext4, the main offender, consider using instead
              the  mount  option  nodelalloc,  which  will fix both the
              performance degradation and the data safety  issues,  the
              latter  by making the file system not produce zero-length
              files on abrupt system  crashes  with  any  software  not
              doing syncs before atomic renames.

              Warning:  Using  this option might improve performance at
              the cost of losing data, use with care.

              architecture: Process even  packages  with  wrong  or  no
              architecture.

              bad-path: PATH is missing important programs, so problems
              are likely.

              not-root: Try to (de)install things even when not root.

              bad-verify:  Install  a  package   even   if   it   fails
              authenticity check.

       --ignore-depends=package,...
              Ignore   dependency-checking   for   specified   packages
              (actually, checking is performed, but only warnings about
              conflicts are given, nothing else).

       --new, --old
              Select  new  or  old  binary  package  format.  This is a
              dpkg-deb(1) option.

       --nocheck
              Don't read  or  check  contents  of  control  file  while
              building a package.  This is a dpkg-deb(1) option.

       --no-act, --dry-run, --simulate
              Do  everything  which  is  supposed to be done, but don't
              write any changes. This is used to see what would  happen
              with  the  specified  action,  without actually modifying
              anything.

              Be sure to give --no-act before the action-parameter,  or
              you  might  end  up  with undesirable results. (e.g. dpkg
              --purge foo --no-act will first  purge  package  foo  and
              then  try  to  purge  package  --no-act,  even though you
              probably expected it to actually do nothing)

       -R, --recursive
              Recursively handle all  regular  files  matching  pattern
              *.deb  found  at  specified  directories  and  all of its
              subdirectories. This can be used with -i, -A,  --install,
              --unpack and --avail actions.

       -G     Don't  install  a  package if a newer version of the same
              package  is  already  installed.  This  is  an  alias  of
              --refuse-downgrade.

       --admindir=dir
              Change  default  administrative directory, which contains
              many  files  that  give  information  about   status   of
              installed  or  uninstalled  packages,  etc.  (Defaults to
              /var/lib/dpkg)

       --instdir=dir
              Change default installation directory which refers to the
              directory  where packages are to be installed. instdir is
              also the directory passed  to  chroot(2)  before  running
              package's  installation  scripts,  which  means  that the
              scripts see instdir as a root directory.  (Defaults to /)

       --root=dir
              Changing root changes instdir  to  dir  and  admindir  to
              dir/var/lib/dpkg.

       -O, --selected-only
              Only   process   the   packages  that  are  selected  for
              installation. The actual marking is done with dselect  or
              by  dpkg,  when  it handles packages. For example, when a
              package is  removed,  it  will  be  marked  selected  for
              deinstallation.

       -E, --skip-same-version
              Don't  install  the  package  if  the same version of the
              package is already installed.

       --pre-invoke=command
       --post-invoke=command
              Set an invoke hook command to be run via "sh  -c"  before
              or after the dpkg run for the unpack, configure, install,
              triggers-only, remove and purge dpkg actions. This option
              can  be  specified  multiple times. The order the options
              are specified  is  preserved,  with  the  ones  from  the
              configuration  files  taking precedence.  The environment
              variable DPKG_HOOK_ACTION is set for  the  hooks  to  the
              current  dpkg  action.  Note:  front-ends might call dpkg
              several times per invocation, which might run  the  hooks
              more times than expected.

       --path-exclude=glob-pattern
       --path-include=glob-pattern
              Set glob-pattern as a path filter, either by excluding or
              re-including  previously  excluded  paths  matching   the
              specified patterns during install.

              Warning: take into account that depending on the excluded
              paths you might completely break your  system,  use  with
              caution.

              The  glob  patterns  use  the  same wildcards used in the
              shell, were  '*'  matches  any  sequence  of  characters,
              including  the  empty  string  and also '/'. For example,
              '/usr/*/READ*'  matches  '/usr/share/doc/package/README'.
              As  usual,  '?'  matches  any  single  character  (again,
              including '/'). And '[' starts a character  class,  which
              can   contain   a   list   of   characters,   ranges  and
              complementations. See glob(7)  for  detailed  information
              about  globbing.  Note:  the current implementation might
              re-include more directories and symlinks than needed,  to
              be  on  the safe side and avoid possible unpack failures,
              future work might fix this.

              This  can  be  used  to  remove  all  paths  except  some
              particular ones; a typical case is:

              --path-exclude=/usr/share/doc/*
              --path-include=/usr/share/doc/*/copyright

              to  remove  all  documentation files except the copyright
              files.

              These two options can be specified  multiple  times,  and
              interleaved  with  each  other. Both are processed in the
              given order, with the last rule that matches a file  name
              making the decision.

       --status-fd n
              Send   machine-readable   package   status  and  progress
              information to file descriptor  n.  This  option  can  be
              specified  multiple  times.  The information is generally
              one record per line, in one of the following forms:

              status: package: status
                     Package status changed; status is as in the status
                     file.

              status: package : error : extended-error-message
                     An   error  occurred.  Any  possible  newlines  in
                     extended-error-message will be converted to spaces
                     before output.

              status:  file  :  conffile-prompt : 'real-old' 'real-new'
              useredited distedited
                     User is being asked a conffile question.

              processing: stage: package
                     Sent just before a processing stage starts.  stage
                     is  one  of  upgrade,  install  (both  sent before
                     unpacking),   configure,   trigproc,    disappear,
                     remove, purge.

       --status-logger=command
              Send   machine-readable   package   status  and  progress
              information to the shell command's standard  input.  This
              option can be specified multiple times. The output format
              used is the same as in --status-fd.

       --log=filename
              Log  status  change  updates  and  actions  to  filename,
              instead  of the default /var/log/dpkg.log. If this option
              is given multiple times, the last filename is  used.  Log
              messages  are  of  the  form  `YYYY-MM-DD HH:MM:SS status
              <state>  <pkg>  <installed-version>'  for  status  change
              updates;  `YYYY-MM-DD HH:MM:SS <action> <pkg> <installed-
              version> <available-version>' for actions where  <action>
              is  one of install, upgrade, remove, purge; and `YYYY-MM-
              DD HH:MM:SS conffile <filename> <decision>' for  conffile
              changes where <decision> is either install or keep.

       --no-debsig
              Do not try to verify package signatures.

       --no-triggers
              Do  not  run  any  triggers in this run (activations will
              still be recorded).  If used with --configure package  or
              --triggers-only  package  then the named package postinst
              will still be run even if only a triggers run is  needed.
              Use  of  this  option  may leave packages in the improper
              triggers-awaited and triggers-pending states. This can be
              fixed later by running: dpkg --configure --pending.

       --triggers
              Cancels a previous --no-triggers.

FILES

       /etc/dpkg/dpkg.cfg
              Configuration file with default options.

       /var/log/dpkg.log
              Default  log  file  (see /etc/dpkg/dpkg.cfg(5) and option
              --log).

       The other files listed below are in their  default  directories,
       see  option  --admindir  to see how to change locations of these
       files.

       /var/lib/dpkg/available
              List of available packages.

       /var/lib/dpkg/status
              Statuses  of  available  packages.  This  file   contains
              information   about  whether  a  package  is  marked  for
              removing or not, whether it is installed or not, etc. See
              section INFORMATION ABOUT PACKAGES for more info.

              The  status  file  is backed up daily in /var/backups. It
              can  be  useful  if  it's  lost  or  corrupted   due   to
              filesystems troubles.

       The  following  files  are  components  of a binary package. See
       deb(5) for more information about them:

       control

       conffiles

       preinst

       postinst

       prerm

       postrm

ENVIRONMENT

       HOME   If set, dpkg will use it as the directory from  which  to
              read the user specific configuration file.

       TMPDIR If  set,  dpkg  will  use it as the directory in which to
              create temporary files and directories.

       PAGER  The  program  dpkg  will  execute  when  displaying   the
              conffiles.

       SHELL  The program dpkg will execute when starting a new shell.

       COLUMNS
              Sets   the   number  of  columns  dpkg  should  use  when
              displaying formatted text. Currently only used by -l.

       DPKG_SHELL_REASON
              Defined by dpkg on the  shell  spawned  on  the  conffile
              prompt  to  examine  the  situation. Current valid value:
              conffile-prompt.

       DPKG_CONFFILE_OLD
              Defined by dpkg on the  shell  spawned  on  the  conffile
              prompt to examine the situation. Contains the path to the
              old conffile.

       DPKG_CONFFILE_NEW
              Defined by dpkg on the  shell  spawned  on  the  conffile
              prompt to examine the situation. Contains the path to the
              new conffile.

       DPKG_RUNNING_VERSION
              Defined by dpkg on the maintainer script  environment  to
              the version of the currently running dpkg instance.

       DPKG_MAINTSCRIPT_PACKAGE
              Defined  by  dpkg on the maintainer script environment to
              the package name being handled.

       DPKG_MAINTSCRIPT_ARCH
              Defined by dpkg on the maintainer script  environment  to
              the architecture the package got built for.

       DPKG_MAINTSCRIPT_NAME
              Defined  by  dpkg on the maintainer script environment to
              the name of the script running (preinst, postinst, prerm,
              postrm).

EXAMPLES

       To list packages related to the editor vi(1):
            dpkg -l '*vi*'

       To see the entries in /var/lib/dpkg/available of two packages:
            dpkg --print-avail elvis vim | less

       To search the listing of packages yourself:
            less /var/lib/dpkg/available

       To remove an installed elvis package:
            dpkg -r elvis

       To install a package, you first need to find it in an archive or
       CDROM. The "available" file shows that the  vim  package  is  in
       section "editors":
            cd /media/cdrom/pool/main/v/vim
            dpkg -i vim_4.5-3.deb

       To make a local copy of the package selection states:
            dpkg --get-selections >myselections

       You might transfer this file to another computer, and install it
       there with:
            dpkg --clear-selections
            dpkg --set-selections <myselections

       Note that this will not actually install or remove anything, but
       just set the selection state on the requested packages. You will
       need some other application to actually download and install the
       requested packages. For example, run apt-get dselect-upgrade.

       Ordinarily,  you  will  find  that  dselect(1)  provides  a more
       convenient way to modify the package selection states.

ADDITIONAL FUNCTIONALITY

       Additional functionality can be gained by installing any of  the
       following packages: apt, aptitude and debsums.

SEE ALSO

       aptitude(1),  apt(1),  dselect(1),  dpkg-deb(1),  dpkg-query(1),
       deb(5), deb-control(5), dpkg.cfg(5), and dpkg-reconfigure(8).

BUGS

       --no-act usually gives less information than might be helpful.

AUTHORS

       See /usr/share/doc/dpkg/THANKS for the list of people  who  have
       contributed to dpkg.