Provided by: erlang-manpages_25.3.2.8+dfsg-1ubuntu4_all bug

NAME

       zip - Utility for reading and creating 'zip' archives.

DESCRIPTION

       This  module  archives  and  extracts  files  to and from a zip archive. The zip format is
       specified by the "ZIP Appnote.txt" file, available on the PKWARE web site www.pkware.com.

       The zip module supports zip archive versions up to 6.1. However,  password-protection  and
       Zip64 are not supported.

       By convention, the name of a zip file is to end with .zip. To abide to the convention, add
       .zip to the filename.

         * To create zip archives, use function zip/2  or  zip/3.  They  are  also  available  as
           create/2,3, to resemble the erl_tar module.

         * To  extract  files  from a zip archive, use function unzip/1 or unzip/2. They are also
           available as extract/1,2, to resemble the erl_tar module.

         * To fold a function over all files in a zip archive, use function foldl/3.

         * To return a list of the files in a zip archive, use function list_dir/1 or list_dir/2.
           They are also available as table/1,2, to resemble the erl_tar module.

         * To print a list of files to the Erlang shell, use function t/1 or tt/1.

         * Sometimes  it  is  desirable to open a zip archive, and to unzip files from it file by
           file,  without  having  to  reopen  the  archive.  This  can  be  done  by   functions
           zip_open/1,2, zip_get/1,2, zip_list_dir/1, and zip_close/1.

LIMITATIONS

         * Zip64 archives are not supported.

         * Password-protected and encrypted archives are not supported.

         * Only  the DEFLATE (zlib-compression) and the STORE (uncompressed data) zip methods are
           supported.

         * The archive size is limited to 2 GB (32 bits).

         * Comments for individual files are not supported when creating zip  archives.  The  zip
           archive comment for the whole zip archive is supported.

         * Changing  a zip archive is not supported. To add or remove a file from an archive, the
           whole archive must be recreated.

DATA TYPES

       zip_comment() = #zip_comment{comment = string()}

              The record zip_comment only contains the archive comment for a zip archive.

       zip_file() =
           #zip_file{name = string(),
                     info = file:file_info(),
                     comment = string(),
                     offset = integer() >= 0,
                     comp_size = integer() >= 0}

              The record zip_file contains the following fields:

                name:
                  The filename

                info:
                  File information as in file:read_file_info/1 in Kernel

                comment:
                  The comment for the file in the zip archive

                offset:
                  The file offset in the zip archive (used internally)

                comp_size:
                  The size of the compressed file (the size of the uncompressed file is found  in
                  info)

       filename() = file:filename()

              The name of a zip file.

       extension() = string()

       extension_spec() =
           all |
           [Extension :: extension()] |
           {add, [Extension :: extension()]} |
           {del, [Extension :: extension()]}

       create_option() =
           memory | cooked | verbose |
           {comment, Comment :: string()} |
           {cwd, CWD :: file:filename()} |
           {compress, What :: extension_spec()} |
           {uncompress, What :: extension_spec()}

              These options are described in create/3.

       handle()

              As returned by zip_open/2.

EXPORTS

       foldl(Fun, Acc0, Archive) -> {ok, Acc1} | {error, Reason}

              Types:

                 Fun = fun((FileInArchive, GetInfo, GetBin, AccIn) -> AccOut)
                 FileInArchive = file:name()
                 GetInfo = fun(() -> file:file_info())
                 GetBin = fun(() -> binary())
                 Acc0 = Acc1 = AccIn = AccOut = term()
                 Archive = file:name() | {file:name(), binary()}
                 Reason = term()

              Calls  Fun(FileInArchive,  GetInfo,  GetBin,  AccIn)  on  successive  files  in the
              Archive, starting with AccIn == Acc0.

              FileInArchive is the name that the file has in the archive.

              GetInfo is a fun that returns information about the file.

              GetBin returns the file contents.

              Both GetInfo and GetBin must be called within the Fun. Their behavior is  undefined
              if they are called outside the context of Fun.

              The  Fun  must  return a new accumulator, which is passed to the next call. foldl/3
              returns the final accumulator value. Acc0 is returned if the archive is  empty.  It
              is  not  necessary  to  iterate over all files in the archive. The iteration can be
              ended prematurely in a controlled manner by throwing an exception.

              Example:

              > Name = "dummy.zip".
              "dummy.zip"
              > {ok, {Name, Bin}} = zip:create(Name, [{"foo", <<"FOO">>}, {"bar", <<"BAR">>}], [memory]).
              {ok,{"dummy.zip",
                   <<80,75,3,4,20,0,0,0,0,0,74,152,97,60,171,39,212,26,3,0,
                     0,0,3,0,0,...>>}}
              > {ok, FileSpec} = zip:foldl(fun(N, I, B, Acc) -> [{N, B(), I()} | Acc] end, [], {Name, Bin}).
              {ok,[{"bar",<<"BAR">>,
                    {file_info,3,regular,read_write,
                               {{2010,3,1},{19,2,10}},
                               {{2010,3,1},{19,2,10}},
                               {{2010,3,1},{19,2,10}},
                               54,1,0,0,0,0,0}},
                   {"foo",<<"FOO">>,
                    {file_info,3,regular,read_write,
                               {{2010,3,1},{19,2,10}},
                               {{2010,3,1},{19,2,10}},
                               {{2010,3,1},{19,2,10}},
                               54,1,0,0,0,0,0}}]}
              > {ok, {Name, Bin}} = zip:create(Name, lists:reverse(FileSpec), [memory]).
              {ok,{"dummy.zip",
                   <<80,75,3,4,20,0,0,0,0,0,74,152,97,60,171,39,212,26,3,0,
                     0,0,3,0,0,...>>}}
              > catch zip:foldl(fun("foo", _, B, _) -> throw(B()); (_,_,_,Acc) -> Acc end, [], {Name, Bin}).
              <<"FOO">>

       list_dir(Archive) -> RetValue

       list_dir(Archive, Options) -> RetValue

       table(Archive) -> RetValue

       table(Archive, Options) -> RetValue

              Types:

                 Archive = file:name() | binary()
                 RetValue = {ok, CommentAndFiles} | {error, Reason :: term()}
                 CommentAndFiles = [zip_comment() | zip_file()]
                 Options = [Option]
                 Option = cooked

              list_dir/1 retrieves all filenames in the zip archive Archive.

              list_dir/2 provides options.

              table/1 and table/2 are provided as synonyms to resemble the erl_tar module.

              The result value is the tuple {ok, List},  where  List  contains  the  zip  archive
              comment as the first element.

              One option is available:

                cooked:
                  By  default,  this function opens the zip file in raw mode, which is faster but
                  does not allow a remote (Erlang) file server to be used. Adding cooked  to  the
                  mode list overrides the default and opens the zip file without option raw.

       t(Archive) -> ok

              Types:

                 Archive = file:name() | binary() | ZipHandle
                 ZipHandle = handle()

              Prints  all  filenames  in the zip archive Archive to the Erlang shell. (Similar to
              tar t.)

       tt(Archive) -> ok

              Types:

                 Archive = file:name() | binary() | ZipHandle
                 ZipHandle = handle()

              Prints filenames and information about all files in the zip archive Archive to  the
              Erlang shell. (Similar to tar tv.)

       unzip(Archive) -> RetValue

       unzip(Archive, Options) -> RetValue

       extract(Archive) -> RetValue

       extract(Archive, Options) -> RetValue

              Types:

                 Archive = file:name() | binary()
                 Options = [Option]
                 Option =
                     {file_list, FileList} |
                     keep_old_files | verbose | memory |
                     {file_filter, FileFilter} |
                     {cwd, CWD}
                 FileList = [file:name()]
                 FileBinList = [{file:name(), binary()}]
                 FileFilter = fun((ZipFile) -> boolean())
                 CWD = file:filename()
                 ZipFile = zip_file()
                 RetValue =
                     {ok, FileList} |
                     {ok, FileBinList} |
                     {error, Reason :: term()} |
                     {error, {Name :: file:name(), Reason :: term()}}

              unzip/1 extracts all files from a zip archive.

              unzip/2 provides options to extract some files, and more.

              extract/1 and extract/2 are provided as synonyms to resemble module erl_tar.

              If argument Archive is specified as a binary, the contents of the binary is assumed
              to be a zip archive, otherwise a filename.

              Options:

                {file_list, FileList}:
                  By default,  all  files  are  extracted  from  the  zip  archive.  With  option
                  {file_list, FileList}, function unzip/2 only extracts the files whose names are
                  included in FileList. The full paths, including the names of all subdirectories
                  within the zip archive, must be specified.

                cooked:
                  By  default,  this function opens the zip file in raw mode, which is faster but
                  does not allow a remote (Erlang) file server to be used. Adding cooked  to  the
                  mode  list overrides the default and opens the zip file without option raw. The
                  same applies for the files extracted.

                keep_old_files:
                  By default, all files with the same name  as  files  in  the  zip  archive  are
                  overwritten.   With  option  keep_old_files  set,  function  unzip/2  does  not
                  overwrite existing files. Notice that even with option memory specified,  which
                  means  that  no  files  are  overwritten,  existing files are excluded from the
                  result.

                verbose:
                  Prints an informational message for each extracted file.

                memory:
                  Instead of extracting to the current directory, the result is given as  a  list
                  of tuples {Filename, Binary}, where Binary is a binary containing the extracted
                  data of file Filename in the zip archive.

                {cwd, CWD}:
                  Uses the specified directory as current directory. It is prepended to filenames
                  when  extracting  them  from  the  zip  archive. (Acting like file:set_cwd/1 in
                  Kernel, but without changing the global cwd property.)

       zip(Name, FileList) -> RetValue

       zip(Name, FileList, Options) -> RetValue

       create(Name, FileList) -> RetValue

       create(Name, FileList, Options) -> RetValue

              Types:

                 Name = file:name()
                 FileList = [FileSpec]
                 FileSpec =
                     file:name() |
                     {file:name(), binary()} |
                     {file:name(), binary(), file:file_info()}
                 Options = [Option]
                 Option = create_option()
                 RetValue =
                     {ok, FileName :: filename()} |
                     {ok, {FileName :: filename(), binary()}} |
                     {error, Reason :: term()}
                 create_option() =
                     memory | cooked | verbose |
                     {comment, Comment :: string()} |
                     {cwd, CWD :: file:filename()} |
                     {compress, What :: extension_spec()} |
                     {uncompress, What :: extension_spec()}
                 extension_spec() =
                     all |
                     [Extension :: extension()] |
                     {add, [Extension :: extension()]} |
                     {del, [Extension :: extension()]}

              Creates a zip archive containing the files specified in FileList.

              create/2 and create/3 are provided as synonyms to resemble module erl_tar.

              FileList is a list of files, with paths relative to the  current  directory,  which
              are  stored with this path in the archive. Files can also be specified with data in
              binaries to create an archive directly from data.

              Files  are  compressed  using  the  DEFLATE  compression,  as  described   in   the
              "Appnote.txt"  file.  However,  files  are  stored  without compression if they are
              already compressed. zip/2 and zip/3 check the file extension to  determine  if  the
              file  is  to be stored without compression. Files with the following extensions are
              not compressed: .Z, .zip, .zoo, .arc, .lzh, .arj.

              It is possible to override the default behavior and control  what  types  of  files
              that are to be compressed by using options {compress, What} and {uncompress, What}.
              It is also possible to use many compress and uncompress options.

              To trigger file compression, its extension must match with the  compress  condition
              and  must  not  match  the uncompress condition. For example, if compress is set to
              ["gif", "jpg"] and uncompress is set to ["jpg"], only files  with  extension  "gif"
              are compressed.

              Options:

                cooked:
                  By  default,  this function opens the zip file in mode raw, which is faster but
                  does not allow a remote (Erlang) file server to be used. Adding cooked  to  the
                  mode  list overrides the default and opens the zip file without the raw option.
                  The same applies for the files added.

                verbose:
                  Prints an informational message about each added file.

                memory:
                  The output is not to a file, but instead as a tuple {FileName,  binary()}.  The
                  binary  is  a  full  zip  archive  with  header  and can be extracted with, for
                  example, unzip/2.

                {comment, Comment}:
                  Adds a comment to the zip archive.

                {cwd, CWD}:
                  Uses the specified directory as current work directory (cwd). This is prepended
                  to  filenames  when  adding  them, although not in the zip archive (acting like
                  file:set_cwd/1 in Kernel, but without changing the global cwd property.).

                {compress, What}:
                  Controls what types of files to be compressed. Defaults to all.  The  following
                  values of What are allowed:

                  all:
                    All files are compressed (as long as they pass the uncompress condition).

                  [Extension]:
                    Only files with exactly these extensions are compressed.

                  {add,[Extension]}:
                    Adds these extensions to the list of compress extensions.

                  {del,[Extension]}:
                    Deletes these extensions from the list of compress extensions.

                {uncompress, What}:
                  Controls  what  types  of  files to be uncompressed. Defaults to [".Z", ".zip",
                  ".zoo", ".arc", ".lzh", ".arj"]. The following values of What are allowed:

                  all:
                    No files are compressed.

                  [Extension]:
                    Files with these extensions are uncompressed.

                  {add,[Extension]}:
                    Adds these extensions to the list of uncompress extensions.

                  {del,[Extension]}:
                    Deletes these extensions from the list of uncompress extensions.

       zip_close(ZipHandle) -> ok | {error, einval}

              Types:

                 ZipHandle = handle()

              Closes a zip archive,  previously  opened  with  zip_open/1,2.  All  resources  are
              closed, and the handle is not to be used after closing.

       zip_get(ZipHandle) -> {ok, [Result]} | {error, Reason}

       zip_get(FileName, ZipHandle) -> {ok, Result} | {error, Reason}

              Types:

                 FileName = file:name()
                 ZipHandle = handle()
                 Result = file:name() | {file:name(), binary()}
                 Reason = term()

              Extracts one or all files from an open archive.

              The  files are unzipped to memory or to file, depending on the options specified to
              function zip_open/1,2 when opening the archive.

       zip_list_dir(ZipHandle) -> {ok, Result} | {error, Reason}

              Types:

                 Result = [zip_comment() | zip_file()]
                 ZipHandle = handle()
                 Reason = term()

              Returns the file list of an open zip archive. The first returned element is the zip
              archive comment.

       zip_open(Archive) -> {ok, ZipHandle} | {error, Reason}

       zip_open(Archive, Options) -> {ok, ZipHandle} | {error, Reason}

              Types:

                 Archive = file:name() | binary()
                 ZipHandle = handle()
                 Options = [Option]
                 Option = cooked | memory | {cwd, CWD :: file:filename()}
                 Reason = term()

              Opens  a  zip  archive,  and  reads  and saves its directory. This means that later
              reading files from the archive is faster than unzipping files one at  a  time  with
              unzip/1,2.

              The archive must be closed with zip_close/1.

              The ZipHandle is closed if the process that originally opened the archive dies.