Ubuntu Manpage: ch-test - Run some or all of the Charliecloud test suite

Provided by: charliecloud-tests_0.37-1build1_amd64

NAME

       ch-test - Run some or all of the Charliecloud test suite

SYNOPSIS

          $ ch-test [PHASE] [--scope SCOPE] [--pack-fmt FMT] [ARGS]

DESCRIPTION

Charliecloud comes with a comprehensive test suite that exercises the container workflow
itself as well as a few example applications. ch-test coordinates running the test suite.

While the CLI has lots of options, the defaults are reasonable, and bare ch-test will give
useful results in a few minutes on single-node, internet-connected systems with a few GB
available in /var/tmp.

The test suite requires a few GB (standard scope) or tens of GB (full scope) of storage
for test fixtures:

• Builder storage (e.g., layer cache). This goes wherever the builder puts it.

• Packed images directory: image tarballs or SquashFS files.

• Unpacked images directory. Images are unpacked into and then run from here.

• Filesystem permissions directories. These are used to test that the kernel is enforcing
permissions correctly. Note that this exercises the kernel, not Charliecloud, and can be
omitted from routine Charliecloud testing.

The first three are created when needed if they don’t exist, while the filesystem
permissions fixtures must be created manually, in order to accommodate configurations
where sudo is not available via the same login path used for running tests.

The packed and unpacked image directories specified for testing are volatile. The
contents of these directories are deleted before the build and run phases, respectively.

In all four cases, when creating directories, only the final path component is created.
Parent directories must already exist, i.e., ch-test uses the behavior of mkdir rather
than mkdir -p.

Some of the tests exercise parallel functionality. If ch-test is run on a single node,
multiple cores will be used; if in a Slurm allocation, multiple nodes too.

The subset of tests to run mostly splits along two key dimensions. The phase is which
parts of the workflow to run. Different parts of the workflow can be tested on different
systems by copying the necessary artifacts between them, e.g. by building images on one
system and running them on another. The scope allows trading off thoroughness versus time.

PHASE must be one of the following:

build Image building and associated functionality, with the selected builder.

run Running containers and associated functionality. This requires a packed images
directory produced by a successful build phase, which can be copied from the
build system if it’s not also the run system.

rootemu
Test the root emulation modes (seccomp, fakeroot, and none) on various linux
distributions.

examples
Example applications. Requires an unpacked images directory produced by a
successful run phase.

all Execute phases build, rootemu, run, and examples, in that order.

mk-perm-dirs
Create the filesystem permissions directories. Requires --perm-dirs.

build-images
Build images from build phase, without running the associated tests.

clean Delete automatically-generated test files, and packed and unpacked image
directories.

rm-perm-dirs
Remove the filesystem permissions directories. Requires --perm-dirs.

-f, --file FILE[:TEST]
Run the tests in the given file only, which can be an arbitrary .bats file,
except for test.bats under examples, where you must specify the corresponding
Dockerfile or Build file instead. This is somewhat brittle and typically used
for development or debugging. For example, it does not check whether the
pre-requisites of whatever is in the file are satisfied. Often running build and
run first is sufficient, but this varies.

If TEST is also given, then run only tests with name containing that string,
skipping the others. The separator is a literal colon. If the string contains
shell metacharacters such as space, you’ll need to quote the argument to protect
it from the shell.

Scope is specified with:

-s, --scope SCOPE
SCOPE must be one of the following:

• quick: Most important subset of workflow. Handy for development.

• standard: All tested workflow functionality and a selection of more important
examples. (Default.)

• full: All available tests, including all examples.

Image format is specified with:

--pack-fmt FMT
FMT must be one of the following:

• squash-mount or 🐘: SquashFS archive, run directly from the archive using
ch-run’s internal SquashFUSE functionality. In this mode, tests that require
writing to the image are skipped.

• tar-unpack or 📠: Tarball, and the images are unpacked before running.

• squash-unpack or 🎃: SquashFS, and the images are unpacked before running.

Default: $CH_TEST_PACK_FMT if set. Otherwise, if mksquashfs(1) is available and
ch-run was built with libsquashfuse support, then squash-mount, else tar-unpack.

Additional arguments:

-b, --builder BUILDER
Image builder to use. Default: $CH_TEST_BUILDER if set, otherwise ch-image.

--dry-run
Print summary of what would be tested and then exit.

-h, --help
Print usage and then exit.

--img-dir DIR
Set unpacked images directory to DIR. In a multi-node allocation, this directory
may not be shared between nodes. Default: $CH_TEST_IMGDIR if set; otherwise
/var/tmp/${USER}.img.

--lustre DIR
Use DIR for run-phase Lustre tests. Default: CH_TEST_LUSTREDIR if set; otherwise
skip them.

The tests will create, populate, and delete a new subdirectory under DIR,
leaving everything else in DIR untouched.

--pack-dir DIR
Set packed images directory to DIR. Default: $CH_TEST_TARDIR if set; otherwise
/var/tmp/${USER}.pack.

--pedantic (yes|no)
Some tests require configurations that are very specific (e.g., being a member
of at least two groups) or unusual (e.g., sudo to a non-root group). If yes,
then fail if the requirement is not met; if no, then skip. The default is yes
for CI environments or people listed in README.md, no otherwise.

If yes and sudo seems to be available, implies --sudo.

--perm-dir DIR
Add DIR to filesystem permission fixture directories; can be specified multiple
times. We recommend one such directory per mounted filesystem type whose kernel
module you do not trust; e.g., you probably don’t need to test your tmpfses, but
out-of-tree filesystems very likely need this.

Implies --sudo. Default: CH_TEST_PERMDIRS if set; otherwise skip the filesystem
permissions tests.

--sudo Enable things that require sudo, such as certain privilege escalation tests and
creating/removing the filesystem permissions fixtures. Requires generic sudo
capabilities. Note that the Docker builder uses sudo docker even without this
option.

EXIT STATUS

       Zero if all tests passed; non-zero if any failed. For setup and teardown phases,  zero  if
       everything was created or deleted correctly, non-zero otherwise.

BUGS

       Bats  will wait until all descendant processes finish before exiting, so if you get into a
       failure mode where a test sequence doesn’t clean up all its processes, ch-test will hang.

EXAMPLES

       Many systems can simply use the defaults. To run the build, run, and examples phases on  a
       single system, without the filesystem permissions tests:

          $ ch-test
          ch-test version 0.12

          ch-run: 0.12 /usr/local/bin/ch-run
          bats:   0.4.0 /usr/bin/bats
          tests:  /usr/local/libexec/charliecloud/test

          phase:                build run examples
          scope:                standard (default)
          builder:              docker (default)
          use generic sudo:     no (default)
          unpacked images dir:  /var/tmp/img (default)
          packed images dir:    /var/tmp/tar (default)
          fs permissions dirs:  skip (default)

          checking namespaces ...
          ok

          checking builder ...
          found: /usr/bin/docker 19.03.2

          bats build.bats build_auto.bats build_post.bats
           ✓ documentation seems sane
           ✓ version number seems sane
          [...]
          All tests passed.

       The next example is for a more complex setup like you might find in HPC centers:

          • Non-default fixture directories.

          • Non-default scope.

          • Different build and run systems.

          • Run the filesystem permissions tests.

       Output has been omitted.

          (mybox)$ ssh hpc-admin
          (hpc-admin)$ ch-test mk-perm-dirs --perm-dir /scratch/$USER/perms \
                                            --perm-dir /home/$USER/perms
          (hpc-admin)$ exit
          (mybox)$ ch-test build --scope full
          (mybox)$ scp -r /var/tmp/pack hpc:/scratch/$USER/pack
          (mybox)$ ssh hpc
          (hpc)$ salloc -N2
          (cn001)$ export CH_TEST_TARDIR=/scratch/$USER/pack
          (cn001)$ export CH_TEST_IMGDIR=/local/tmp
          (cn001)$ export CH_TEST_PERMDIRS="/scratch/$USER/perms /home/$USER/perms"
          (cn001)$ export CH_TEST_SCOPE=full
          (cn001)$ ch-test run
          (cn001)$ ch-test examples

REPORTING BUGS

       If  Charliecloud  was  obtained  from your Linux distribution, use your distribution’s bug
       reporting procedures.

       Otherwise, report bugs to: https://github.com/hpc/charliecloud/issues

COPYRIGHT

       2014–2023, Triad National Security, LLC and others