Provided by: plc-utils-extra_0.0.6+git20230504.1ba7d5a0-1_amd64 bug

NAME

       coqos_info - CoQoS Stream Utility

SYNOPSIS

       coqos_info [options] type [cid] [limit] [device]

DESCRIPTION

       This page is under construction.

       None.

       This  program is part of the Qualcomm Atheros Powerline Toolkit.  See the plc man page for
       an overview and installation instructions.

OPTIONS

       -e     Redirects stderr messages to stdout.  By convention  progress  messages  and  error
              messages  are  printed on stderr while primary program output is printed on stdout.
              This option prints all output on stdout in cases where this is desired.

       -i interface
              Select the host Ethernet interface.  All requests are sent via this host  interface
              and  only  reponses  received  via this host interface are recognized.  The default
              interface is  eth1  because  most  people  use  eth0  as  their  principle  network
              connection;  however,  if  environment  string  "PLC"  is  defined  then  it  takes
              precedence over the default interface.  This  option  then  takes  precedence  over
              either default.

       -q     Suppresses status messages on stderr.

       -r     Display relative memory offsets on output.  This option is the default.

       -v     Prints additional information on stdout.  In particular, this option dumps outgoing
              Ethernet packets on stdout.

       -?,--help
              Displays program help information on stderr.  This option takes precedence over all
              other options on the command line except version information.

       -!,--version
              Displays  program version information on stderr.  This option takes precedence over
              all other options on the command line except help  information.   Use  this  option
              when sending screen dumps to Atheros technical staff.

ARGUMENTS

       type   The  request  type.   Valid  types are "STA", "CID", "RSVD", "VIC", "BW", and "BW".
              Individual request types are described below.

       device The MAC address of some powerline device.  More than one address may  be  specified
              on  the  command  line.   If more than one address is specified then operations are
              performed on each device in turn.  The default address is "local".  See DEVICES for
              more information.

TYPES

       STA    Station.  Request information on all active connections for this station.

       CID number
              Connection  identifier.   If  present,  it  must  be followed by a valid connection
              identifier.  Connection identifiers are assigned when the connection is added using
              program  coqos_add.   The  connection  identifier  is two bytes where byte 0 is the
              LLID-F and byte 1 is the OrigTEI.

       RSVD   Reserved.  Sets REQ_TYPE = 2 in the mme.

       VIC    Vicinity.  Provide all active connections in the vicinity.

        BW number
              Bandwidth.  set station to provide info when the limit is  exceeded.   BW  must  be
              followed by a number.  This number is in units of 10kbps.  BWC cancels all previous
              requests.

DEVICES

       Ethernet MAC addresses are expressed as six hexadecimal  octets  optionally  separated  by
       colon.  For example, the Qualcomm Atheros Local Management Address (LMA) of "00b052000001"
       may also be  entered  as  "00:b0:52:00:00:01"  or  "00b052:000001".   Addresses  are  case
       insensitive  and  quotes are optional.  In addition, some special addresses may be entered
       by name rather than number where names are case sensitive.

       all    A synonym for the "broadcast" address, described next.

       broadcast
              A synonym for the Ethernet  broadcast  address,  FF:FF:FF:FF:FF:FF.   All  devices,
              whether local, remote or foreign will respond to this address.

       local  A  synonym for the Qualcomm Atheros vendor specific Local Management Address (LMA),
              00:B0:52:00:00:01.  All local Atheros devices recognize this address but remote and
              foreign  devices  do  not.   A  remote  device  is  any  device at the far end of a
              powerline connection.  A foreign device is any device not manufactured by Atheros.

REFERENCES

       See the Qualcomm  Atheros  HomePlug  AV  Firmware  Technical  Reference  Manual  for  more
       information.

DISCLAIMER

       Atheros   HomePlug  AV  Vendor  Specific  Management  Message  structure  and  content  is
       proprietary to Qualcomm Atheros, Ocala FL USA.  Consequently, public information  may  not
       be available.  Qualcomm Atheros reserves the right to modify message structure and content
       in future firmware releases without any obligation to notify or compensate users  of  this
       program.

EXAMPLES

       This command requests connection from the station

            # coqos_info STA 00:B0:52:BA:BE:01

       This command set the station to provide notification if the bandwidth used exceeds 20mbps

            # coqos_info BW 2000 00:B0:52:BA:BE:01

SEE ALSO

       coqos_add(1), coqos_rel(1), coqos_man(1), coqos_mod(1)

CREDITS

        Bill Wike
        Nathaniel Houghton
        Charles Maier