Provided by: pcp-export-pcp2zabbix_6.2.0-1.1build4_amd64 bug

NAME

       pcp2zabbix - pcp-to-zabbix metrics exporter

SYNOPSIS

       pcp2zabbix   [-5CGHIjlLnrRvV?]    [-4  action]  [-8|-9  limit]  [-a  archive]  [-A  align]
       [--archive-folio  folio]  [-b|-B  space-scale]   [-c   config]   [--container   container]
       [--daemonize]  [-e  derived]  [-E  send-interval] [-g server] [-h host] [-i instances] [-J
       rank] [-K spec] [-N predicate] [-O origin] [-p port] [-P|-0 precision] [-q|-Q count-scale]
       [-s  samples]  [-S  starttime] [-t interval] [-T endtime] [-x prefix] [-X hostname] [-y|-Y
       time-scale] metricspec [...]

DESCRIPTION

       pcp2zabbix is a customizable performance metrics exporter tool from PCP  to  Zabbix.   Any
       available performance metric, live or archived, system and/or application, can be selected
       for exporting using either command line arguments or a configuration file.

       pcp2zabbix is a close  relative  of  pmrep(1).   Refer  to  pmrep(1)  for  the  metricspec
       description accepted on pcp2zabbix command line.  See pmrep.conf(5) for description of the
       pcp2zabbix.conf configuration  file  syntax.   This  page  describes  pcp2zabbix  specific
       options  and  configuration file differences with pmrep.conf(5).  pmrep(1) also lists some
       usage examples of which most are applicable with pcp2zabbix as well.

       Only the command line options listed on this page are supported, other  options  available
       for pmrep(1) are not supported.

       Options  via  environment values (see pmGetOptions(3)) override the corresponding built-in
       default  values  (if  any).   Configuration  file  options  override   the   corresponding
       environment   variables  (if  any).   Command  line  options  override  the  corresponding
       configuration file options (if any).

CONFIGURATION FILE

       pcp2zabbix uses  a  configuration  file  with  syntax  described  in  pmrep.conf(5).   The
       following options are common with pmrep.conf: version, source, speclocal, derived, header,
       globals, samples, interval, type, type_prefer, ignore_incompat,  names_change,  instances,
       live_filter,  rank, limit_filter, limit_filter_force, invert_filter, predicate, omit_flat,
       precision,     precision_force,     count_scale,      count_scale_force,      space_scale,
       space_scale_force,  time_scale,  time_scale_force.  The rest of the pmrep.conf options are
       recognized but ignored for compatibility.

   pcp2zabbix specific options
       zabbix_server (string)
           Specify the destination Zabbix server hostname or IP address.  If a host is  monitored
           by  a  proxy,  proxy  hostname  or  IP  address should be used instead.  Corresponding
           command line option is -g.  Defaults to localhost.

       zabbix_port (integer)
           Specify the port number of  server  trapper  running  on  the  server.   Corresponding
           command line option is -p.  Defaults to 10051.

       zabbix_host (string)
           Specify agent hostname as registered in Zabbix frontend.  Host IP address and DNS name
           will not work.  Corresponding command line option is  -X.   Defaults  to  the  metrics
           source host.

       zabbix_interval (string)
           Indicates  the interval to send metrics to the Zabbix server.  This can be longer than
           the reporting interval to minimize the overhead when communicating with the server (as
           each   send  creates  a  new  connection).   Follows  the  time  syntax  described  in
           PCPIntro(1).  Corresponding command line option is  -E.   Defaults  to  the  reporting
           interval.   Zabbix  tools  send  at  most 250 metrics at a time.  Ignored when reading
           metrics from PCP archives, in which case metrics will be sent roughly  at  250  metric
           batches.

       zabbix_prefix (string)
           Specify  the prefix for metrics sent to the Zabbix server.  Corresponding command line
           option is -x.  Defaults to pcp..

       zabbix_lld (boolean)
           Specify whether to enable Zabbix  low-level  discovery.   Corresponding  command  line
           option is -l.  Defaults to no.

OPTIONS

       The available command line options are:

       -0 precision, --precision-force=precision
            Like -P but this option will override per-metric specifications.

       -4 action, --names-change=action
            Specify  which  action  to  take  on  receiving  a  metric  names change event during
            sampling.  These events occur when  a  PMDA  discovers  new  metrics  sometime  after
            starting  up,  and  informs  running  client tools like pcp2zabbix.  Valid values for
            action are update (refresh metrics being sampled), ignore (do nothing -  the  default
            behaviour) and abort (exit the program if such an event occurs).

       -5, --ignore-unknown
            Silently ignore any metric name that cannot be resolved.  At least one metric must be
            found for the tool to start.

       -8 limit, --limit-filter=limit
            Limit results to instances with values above/below limit.  A  positive  integer  will
            include instances with values at or above the limit in reporting.  A negative integer
            will include instances with values at or below the limit in reporting.   A  value  of
            zero  performs no limit filtering.  This option will not override possible per-metric
            specifications.  See also -J and -N.

       -9 limit, --limit-filter-force=limit
            Like -8 but this option will override per-metric specifications.

       -a archive, --archive=archive
            Performance metric values are retrieved from the set of  Performance  Co-Pilot  (PCP)
            archive  files identified by the archive argument, which is a comma-separated list of
            names, each of which may be the base name of an archive or the name  of  a  directory
            containing one or more archives.

       -A align, --align=align
            Force  the initial sample to be aligned on the boundary of a natural time unit align.
            Refer to PCPIntro(1) for a complete description of the syntax for align.

       --archive-folio=folio
            Read metric source archives  from  the  PCP  archive  folio  created  by  tools  like
            pmchart(1) or, less often, manually with mkaf(1).

       -b scale, --space-scale=scale
            Unit/scale  for  space  (byte)  metrics,  possible  values include bytes, Kbytes, KB,
            Mbytes, MB, and  so  forth.   This  option  will  not  override  possible  per-metric
            specifications.  See also pmParseUnitsStr(3).

       -B scale, --space-scale-force=scale
            Like -b but this option will override per-metric specifications.

       -c config, --config=config
            Specify the config file or directory to use.  In case config is a directory all files
            in  it  ending  .conf  will  be  included.   The  default  is  the  first  found  of:
            ./pcp2zabbix.conf,     $HOME/.pcp2zabbix.conf,     $HOME/pcp/pcp2zabbix.conf,     and
            $PCP_SYSCONF_DIR/pcp2zabbix.conf.   For  details,   see   the   above   section   and
            pmrep.conf(5).

       --container=container
            Fetch  performance  metrics from the specified container, either local or remote (see
            -h).

       -C, --check
            Exit before reporting any values, but after parsing the configuration and metrics and
            printing possible headers.

       --daemonize
            Daemonize on startup.

       -e derived, --derived=derived
            Specify  derived performance metrics.  If derived starts with a slash (``/'') or with
            a dot (``.'') it will be interpreted as a PCP  derived  metrics  configuration  file,
            otherwise  it  will  be  interpreted  as comma- or semicolon-separated derived metric
            expressions.  For complete description of derived metrics  and  PCP  derived  metrics
            configuration    files    see    pmLoadDerivedConfig(3)   and   pmRegisterDerived(3).
            Alternatively, using  pmrep.conf(5)  configuration  syntax  allows  defining  derived
            metrics as part of metricsets.

       -E interval, --zabbix-interval=interval
            Specify  the interval to send metrics to the server.  See zabbix_interval description
            above for details.

       -g server, --zabbix-server=server
            Destination Zabbix server.

       -G, --no-globals
            Do not include global metrics in reporting (see pmrep.conf(5)).

       -h host, --host=host
            Fetch performance metrics  from  pmcd(1)  on  host,  rather  than  from  the  default
            localhost.

       -H, --no-header
            Do not print any headers.

       -i instances, --instances=instances
            Retrieve  and  report only the specified metric instances.  By default all instances,
            present and future, are reported.

            Refer to pmrep(1) for complete description of this option.

       -I, --ignore-incompat
            Ignore incompatible metrics.  By default incompatible metrics (that is, their type is
            unsupported or they cannot be scaled as requested) will cause pcp2zabbix to terminate
            with an error message.  With  this  option  all  incompatible  metrics  are  silently
            omitted from reporting.  This may be especially useful when requesting non-leaf nodes
            of the PMNS tree for reporting.

       -l, --zabbix-lld
            Add low-level discovery (LLD) metrics.  This allows PCP metric instance domains to be
            sent  to  Zabbix,  so  that  prototype  items/triggers/graphs  may  be  automatically
            constructed by Zabbix.  For  each  PCP  metric  with  an  instance  domain,  the  key
            pcp.discovery[pcp.met.ric]  is  sent  periodically.  This symbol should be added to a
            discovery rule, and will define the {#PCP.MET.RIC} LLD macro.  This macro can in turn
            be  used to define prototype items/triggers/graphs.  The names are adjusted if -x was
            given to override the pcp. prefix.

       -j, --live-filter
            Perform instance live filtering.  This allows capturing all named instances  even  if
            processes  are  restarted  at some point (unlike without live filtering).  Performing
            live filtering over a huge number of instances will add some internal overhead  so  a
            bit of user caution is advised.  See also -n.

       -J rank, --rank=rank
            Limit  results  to highest/lowest ranked instances of set-valued metrics.  A positive
            integer will include highest valued instances in reporting.  A negative integer  will
            include  lowest  valued instances in reporting.  A value of zero performs no ranking.
            Ranking does not imply sorting, see -6.  See also -8.

       -K spec, --spec-local=spec
            When fetching metrics from a local context (see -L), the -K option  may  be  used  to
            control  the DSO PMDAs that should be made accessible.  The spec argument conforms to
            the syntax described in pmSpecLocalPMDA(3).  More than one -K option may be used.

       -L, --local-PMDA
            Use a local context to collect metrics from DSO PMDAs on the local host without PMCD.
            See also -K.

       -n, --invert-filter
            Perform  ranking  before  live  filtering.   By default instance live filtering (when
            requested, see -j) happens before instance ranking (when requested,  see  -J).   With
            this option the logic is inverted and ranking happens before live filtering.

       -N predicate, --predicate=predicate
            Specify  a  comma-separated  list  of predicate filter reference metrics.  By default
            ranking (see -J) happens for each metric individually.  With predicates,  ranking  is
            done  only  for the specified predicate metrics.  When reporting, rest of the metrics
            sharing the same instance domain (see PCPIntro(1)) as the predicate will include only
            the  highest/lowest  ranking  instances of the corresponding predicate.  Ranking does
            not imply sorting, see -6.

            So for example, using proc.memory.rss  (resident  memory  size  of  process)  as  the
            predicate metric together with proc.io.total_bytes and mem.util.used as metrics to be
            reported, only the processes using most/least (as per -J)  memory  will  be  included
            when  reporting  total  bytes written by processes.  Since mem.util.used is a single-
            valued metric (thus not sharing the same  instance  domain  as  the  process  related
            metrics), it will be reported as usual.

       -O origin, --origin=origin
            When  reporting  archived  metrics,  start reporting at origin within the time window
            (see -S and -T).  Refer to PCPIntro(1) for a complete description of the  syntax  for
            origin.

       -p port, --zabbix-port=port
            Zabbix server port.

       -P precision, --precision=precision
            Use precision for numeric non-integer output values.  The default is to use 3 decimal
            places  (when  applicable).   This  option  will  not  override  possible  per-metric
            specifications.

       -q scale, --count-scale=scale
            Unit/scale  for  count metrics, possible values include count x 10^-1, count, count x
            10, count x 10^2, and so forth from 10^-8  to  10^7.   (These  values  are  currently
            space-sensitive.)   This option will not override possible per-metric specifications.
            See also pmParseUnitsStr(3).

       -Q scale, --count-scale-force=scale
            Like -q but this option will override per-metric specifications.

       -r, --raw
            Output raw metric values, do not convert cumulative counters to rates.   This  option
            will override possible per-metric specifications.

       -R, --raw-prefer
            Like -r but this option will not override per-metric specifications.

       -s samples, --samples=samples
            The  argument samples defines the number of samples to be retrieved and reported.  If
            samples is 0 or -s is not specified, pcp2zabbix will sample and  report  continuously
            (in  real  time  mode) or until the end of the set of PCP archives (in archive mode).
            See also -T.

       -S starttime, --start=starttime
            When reporting archived metrics, the report  will  be  restricted  to  those  records
            logged at or after starttime.  Refer to PCPIntro(1) for a complete description of the
            syntax for starttime.

       -t interval, --interval=interval
            Set the reporting interval to  something  other  than  the  default  1  second.   The
            interval  argument  follows  the syntax described in PCPIntro(1), and in the simplest
            form may be an unsigned integer (the implied units in this case  are  seconds).   See
            also the -T option.

       -T endtime, --finish=endtime
            When  reporting  archived  metrics,  the  report  will be restricted to those records
            logged before or at endtime.  Refer to PCPIntro(1) for a complete description of  the
            syntax for endtime.

            When  used  to define the runtime before pcp2zabbix will exit, if no samples is given
            (see -s) then the number of reported  samples  depends  on  interval  (see  -t).   If
            samples  is given then interval will be adjusted to allow reporting of samples during
            runtime.  In case all of -T, -s, and -t are given, endtime determines the actual time
            pcp2zabbix will run.

       -v, --omit-flat
            Report  only  set-valued metrics with instances (e.g. disk.dev.read) and omit single-
            valued ``flat'' metrics without instances (e.g.  kernel.all.sysfork).  See -i and -I.

       -V, --version
            Display version number and exit.

       -x prefix, --zabbix-prefix=prefix
            Metrics prefix for measurements sent to the server.

       -X hostname, --zabbix-host=hostname
            Agent hostname as registered in Zabbix frontend.

       -y scale, --time-scale=scale
            Unit/scale for time metrics, possible  values  include  nanosec,  ns,  microsec,  us,
            millisec,  ms,  and  so forth up to hour, hr.  This option will not override possible
            per-metric specifications.  See also pmParseUnitsStr(3).

       -Y scale, --time-scale-force=scale
            Like -y but this option will override per-metric specifications.

       -?, --help
            Display usage message and exit.

FILES

       pcp2zabbix.conf
            pcp2zabbix configuration file (see -c)

       $PCP_SYSCONF_DIR/pmrep/*.conf
            system provided default pmrep configuration files

PCP ENVIRONMENT

       Environment variables with the prefix PCP_ are used to parameterize the file and directory
       names used by PCP.  On each installation, the file /etc/pcp.conf contains the local values
       for these variables.  The $PCP_CONF  variable  may  be  used  to  specify  an  alternative
       configuration file, as described in pcp.conf(5).

       For environment variables affecting PCP tools, see pmGetOptions(3).

SEE ALSO

       PCPIntro(1),  mkaf(1),  pcp(1),  pcp2elasticsearch(1),  pcp2graphite(1),  pcp2influxdb(1),
       pcp2json(1),  pcp2spark(1),  pcp2xlsx(1),  pcp2xml(1),   pmcd(1),   pminfo(1),   pmrep(1),
       pmGetOptions(3),    pmLoadDerivedConfig(3),    pmParseUnitsStr(3),   pmRegisterDerived(3),
       pmSpecLocalPMDA(3), zbxpcp(3), LOGARCHIVE(5), pcp.conf(5), pmrep.conf(5) and PMNS(5).