Provided by: perl-doc_5.38.2-3.2build2_all 
NAME
perlsynology - Perl 5 on Synology DSM systems
DESCRIPTION
Synology manufactures a vast number of Network Attached Storage (NAS) devices that are
very popular in large organisations as well as small businesses and homes.
The NAS systems are equipped with Synology Disk Storage Manager (DSM), which is a trimmed-
down Linux system enhanced with several tools for managing the NAS. There are several
flavours of hardware: Marvell Armada (ARMv5tel, ARMv7l), Intel Atom (i686, x86_64),
Freescale QorIQ (PPC), and more. For a full list see the Synology FAQ
<https://kb.synology.com/en-global/DSM/tutorial/What_kind_of_CPU_does_my_NAS_have>.
Since it is based on Linux, the NAS can run many popular Linux software packages,
including Perl. In fact, Synology provides a ready-to-install package for Perl, depending
on the version of DSM the installed perl ranges from 5.8.6 on DSM-4.3 to 5.28.1 on
DSM-7.1.
There is an active user community that provides many software packages for the Synology
DSM systems; at the time of writing this document they provide Perl version 5.28.1.
This document describes various features of Synology DSM operating system that will affect
how Perl 5 (hereafter just Perl) is configured, compiled and/or runs. It has been compiled
and verified by Johan Vromans for the Synology DS413 (QorIQ), with feedback from H.Merijn
Brand (DS213: ARMv5tel, RS815: Intel Atom x64, and DS218+: Celeron J3355).
Setting up the build environment
DSM 7
For a comfortable development environment, Entware is currently the only viable solution.
Just follow the detailed instructions on Install Entware on Synology NAS
<https://github.com/Entware/Entware/wiki/Install-on-Synology-NAS>. supported
architectures are armv5, armv7, mipsel, wl500g, x86_32, and x86_64. Check here
<https://pkg.entware.net/binaries/> for supported platforms.
That github link also shows what environments should be supported.
It was tested on DSM-7.1 by H.Merijn Brand on a DS218+ and a DS220+ (both Intel x64).
Entware comes with a precompiled 5.26.1 (Jan 2018) that allowes building shared XS code.
Note that this installation does not use a site_perl folder. The available "cpan" works.
If all required development packages are installed too, also for XS.
Installing perl from the Community package center:
• Using your favourite browser open the DSM management page and start the Package
Center.
• In Settings, add the following Package Sources:
Name: Community
Location: https://synopackage.com/repository/spk/All
• Still in Settings, in Channel Update, select Beta Channel.
To complete the development environment, install make and gcc
ds220# opkg install make gcc
Then, optionally, make sure you use the more recent bash and gawk.
ds220# opkg install bash gawk
ds220# cd /usr/bin
ds220# mv bash bash.syno
ds220# ln -s /opt/bin/bash .
In order to have Configure find the required libraries
ds220# cd /opt/lib
ds220# ln -s libcrypt.so.? libcrypt.so
ds220# ln -s libdl.so.? libdl.so
ds220# ln -s libgdbm.so.? libgdbm.so
ds220# ln -s libgdbm_compat.so.? libgdbm_compat.so
ds220# ln -s libm.so.? libm.so
ds220# ln -s libpthread.so.? libpthread.so
ds220# ln -s libutil.so.? libutil.so
DSM 6
Using iPkg has been deprecated on DSM 6, but an alternative is available for DSM 6:
entware/opkg. For instructions on how to use that, please read Install Entware-ng on
Synology NAS <https://github.com/Entware-ng/Entware-ng/wiki/Install-on-Synology-NAS>
That sadly does not (yet) work on QorIQ. At the moment of writing, the supported
architectures are armv5, armv7, mipsel, wl500g, x86_32, and x86_64. Check here
<https://pkg.entware.net/binaries/> for supported platforms.
Entware-ng comes with a precompiled 5.24.1 (June 2017) that allowes building shared XS
code. Note that this installation does not use a site_perl folder. The available "cpan"
works. If all required development packages are installed too, also for XS.
DSM 5
As DSM is a trimmed-down Linux system, it lacks many of the tools and libraries commonly
found on Linux. The basic tools like sh, cp, rm, etc. are implemented using BusyBox
<https://en.wikipedia.org/wiki/BusyBox>.
• Using your favourite browser open the DSM management page and start the Package
Center.
• If you want to smoke test Perl, install "Perl".
• In Settings, add the following Package Sources:
https://www.cphub.net
http://packages.quadrat4.de
As these two are both discontinued, it is unlikely you will be able to set up a build
environment on DSM 5.
• Still in Settings, in Channel Update, select Beta Channel.
• Press Refresh. In the left panel the item "Community" will appear. Click it. Select
"Bootstrap Installer Beta" and install it.
• Likewise, install "iPKGui Beta".
The application window should now show an icon for iPKGui.
• Start iPKGui. Install the packages "make", "gcc" and "coreutils".
If you want to smoke test Perl, install "patch".
The next step is to add some symlinks to system libraries. For example, the development
software expect a library "libm.so" that normally is a symlink to "libm.so.6". Synology
only provides the latter and not the symlink.
Here the actual architecture of the Synology system matters. You have to find out where
the gcc libraries have been installed. Look in /opt for a directory similar to arm-none-
linux-gnueab or powerpc-linux-gnuspe. In the instructions below I'll use powerpc-linux-
gnuspe as an example.
• On the DSM management page start the Control Panel.
• Click Terminal, and enable SSH service.
• Close Terminal and the Control Panel.
• Open a shell on the Synology using ssh and become root.
• Execute the following commands:
cd /lib
ln -s libm.so.6 libm.so
ln -s libcrypt.so.1 libcrypt.so
ln -s libdl.so.2 libdl.so
cd /opt/powerpc-linux-gnuspe/lib (or
/opt/arm-none-linux-gnueabi/lib)
ln -s /lib/libdl.so.2 libdl.so
WARNING: When you perform a system software upgrade, these links will disappear and need
to be re-established.
Compiling Perl 5
When the build environment has been set up, building and testing Perl is straightforward.
The only thing you need to do is download the sources as usual, and add a file Policy.sh
as follows:
# Administrivia.
perladmin="your.email@goes.here"
# Install Perl in a tree in /opt/perl instead of /opt/bin.
prefix=/opt/perl
# Select the compiler. Note that there is no 'cc' alias or link
# on older DSM versions
cc=gcc
awk=/opt/bin/gawk
# Build flags. Optional
ccflags="-DDEBUGGING"
# Library and include paths.
locincpth="/opt/include"
loclibpth="/opt/lib /usr/local/lib /usr/lib"
libpth="/opt/lib /usr/local/lib /usr/lib"
You may want to create the destination directory and give it the right permissions before
installing, thus eliminating the need to build Perl as a super user.
In the directory where you unpacked the sources, issue the familiar commands:
$ bash ./Configure -Dusedevel -Duseshrplib -Duse64bitall -des
$ make -j2
$ env TEST_JOBS=2 make test_harness
$ make install
Known problems
Configure
The GNU C-compiler might spit out unexpected stuff under -v, which causes the analysis of
cppsymbols to fail because of unmatched quotes.
You'll note if config.sh fails with a syntax error.
Build
Error message "No error definitions found".
This error is generated when it is not possible to find the local definitions for
error codes, due to the uncommon structure of the Synology file system.
This error was fixed in the Perl development git for version 5.19, commit
7a8f1212e5482613c8a5b0402528e3105b26ff24.
Failing tests
ext/DynaLoader/t/DynaLoader.t
One subtest fails due to the uncommon structure of the Synology file system. The file
/lib/glibc.so is missing.
WARNING: Do not symlink /lib/glibc.so.6 to /lib/glibc.so or some system components
will start to fail.
Smoke testing Perl
If building completes successfully, you can set up smoke testing as described in the
Test::Smoke documentation.
For smoke testing you need a running Perl. You can either install the Synology supplied
package for Perl 5.8.6, or build and install your own, much more recent version.
Note that I could not run successful smokes when initiated by the Synology Task Scheduler.
I resorted to initiating the smokes via a cron job run on another system, using ssh:
ssh nas1 wrk/Test-Smoke/smoke/smokecurrent.sh
Local patches
When local patches are applied with smoke testing, the test driver will automatically
request regeneration of certain tables after the patches are applied. The Synology
supplied Perl 5.8.6 (at least on the DS413) is NOT capable of generating these tables. It
will generate opcodes with bogus values, causing the build to fail.
You can prevent regeneration by adding the setting
'flags' => 0,
to the smoke config, or by adding another patch that inserts
exit 0 if $] == 5.008006;
in the beginning of the "regen.pl" program.
Adding libraries
The above procedure describes a basic environment and hence results in a basic Perl. If
you want to add additional libraries to Perl, you may need some extra settings.
For example, the basic Perl does not have any of the DB libraries (db, dbm, ndbm, gdsm).
You can add these using iPKGui, however, you need to set environment variable
LD_LIBRARY_PATH to the appropriate value:
LD_LIBRARY_PATH=/lib:/opt/lib
export LD_LIBRARY_PATH
This setting needs to be in effect while Perl is built, but also when the programs are
run.
REVISION
July 2022, for DSM 5.1.5022 and DSM 6.1-15101-4, and DSM-7.1-42661-3.
AUTHOR
Johan Vromans <jvromans@squirrel.nl> H. Merijn Brand <cpan@tux.freedom.nl>