Provided by: netpbm_11.05.02-1.1build1_amd64 
NAME
pnmpad - add borders to a PNM image
SYNOPSIS
pnmpad [-color=color [-promote={none|format|all}] |-detect-background |-extend-edge
|-white |-black ] [-width=pixels] [-halign=ratio] [-mwidth=pixels] [-left=pixels]
[-right=pixels] [-height=pixels] [-valign=ratio] [-mheight=pixels] [-top=pixels]
[-bottom=pixels] [-reportonly] [-verbose] [pnmfile]
DESCRIPTION
This program is part of Netpbm(1).
pnmpad reads a PNM image as input and outputs a PNM image that is the input image plus
black or white borders of the sizes specified.
If you just need to convert an image to a certain size regardless of the original
dimensions, pamcut with the -pad option may be a better choice.
pnmmargin does essentially the same thing, but allows you to add borders of any color and
requires all four borders to be the same size.
You can use pamcomp to add borders of any content - solid color,
pattern, or whatever. For example, if you wanted to add 10 pixels of red
borders to the top and bottom of a 100x100 image, you could create a
100x120 red image (e.g. with ppmmake) and then use pamcomp
to insert your 100x100 image into the center of it.
OPTIONS
In addition to the options common to all programs based on libnetpbm (most notably -quiet,
see
Common Options ⟨index.html#commonoptions⟩ ), pnmpad recognizes the following command line
options:
All options can be abbreviated to their shortest unique prefix. You may use two hyphens
instead of one to designate an option. You may use either white space or an equals sign
between an option name and its value.
-color=color
-detect-background
-extend-edge
-white
-black This specifies the color of the padding. color is like the argument of the
pnm_parsecolor() library routine ⟨libnetpbm_image.html#colorname⟩ .
-detect-background means the program uses the color of the top left pixel of the
input as the pad color. Note that this could cause odd results if you aren't
padding the top or left of the image.
You may specify only one of -white, -black, -color, and -detect-background.
-extend-edge says to pad by duplicating the adjacent edge of the image pixel by
pixel. E.g. if the top row of the image is 20 white pixels followed by 10 black
pixels, every row of padding added to the top of the image is 20 white pixels
followed by 20 black pixels.
By default, the padding is black.
-white and -black are for backward compatibility. -color, -detect-background, and
-extend-edge were new with Netpbm 11.05 (December 2023).
-left=pixels
-right=pixels
-width=width
-halign=ratio
-mwidth=pixels
Specify amount of left and right padding in pixels.
-left and -right directly specify the amount of padding added to the left and right
sides, respectively, of the image.
Alternatively, you can specify -width and just one of -left and -right and pnmpad
calculates the required padding on the other side to make the output width pixels
wide. If the -width value is less than the width of the input image plus the
specified padding, pnmpad ignores -width.
If you specify all three of -width, -left, and -right, you must ensure that the
-left and -right padding are sufficient to make the image at least as wide as
-width specifies, and in that case -width has no effect on the output. Otherwise,
pnmpad fails.
When you specify -width without -left or -right, and -width is larger than the
input image, pnmpad chooses left and right padding amounts in a certain ratio.
That ratio defaults to half, but you can set it to anything (from 0 to 1) with the
-halign option. If the input image is already at least as wide as -width
specifies, pnmpad adds no padding.
Common values for -halign are:
0.0 left aligned
0.5 center aligned (default)
1.0 right aligned
-mwidth=pixels says to pad to a multiple of pixels pixels. E.g. if pixels is 10,
the output image width will be a multiple of 10 pixels. pnmpad adds to whatever
padding the other options say to do to get to this multiple. It divides that
padding between the left and right sides of the image to maintain the ratio the
other options produce. E.g. if you say -left=10 -right=10 -mwidth=50 with a
100-pixel image, you end up with a 150-pixel image with the extra padding split
evenly between left and right for a total of 25 pixels of padding on the left and
25 on the right. If the other options indicate no padding, pnmpad adds padding in
the ratio specified by -halign and if -halign is not specified, equally on both
sides.
Before Netpbm 10.97 (December 2021), pnmpad does not allow -halign with -mwidth and
adds padding only on the right when -mwidth is specified and the other options
indicate no padding.
Before Netpbm 10.72 (September 2015), there is no -mwidth.
Before Netpbm 10.23 (July 2004), pnmpad did not allow the -left or -right option
together with -width.
-top=pixels
-bottom=pixels
-height=height
-valign=ratio
-mheight=pixels
These options determine the vertical padding. They are analogous to the horizontal
padding options above.
-promote={none|format|all}
This option tells what to do when the -color option specifies a color that cannot
be represented in the input format, which ordinarily is also the output format.
For example, if the input is PGM (which can represent only shades of gray), and you
specify -color=red, should pnmpad make the padding gray or make the output PPM?
none
Make the output have the same format and maxval as the input.
Adjust the pad color to the nearest color possible in that format
(black, white, or a shade of gray).
format
Make the output have the same maxval as the input, but make
the output format PPM if the pad color is not black, white, or gray.
all
Make the format and maxval of the output capable of representing the
pad color. Make the format the least expressive format capable of
representing the pad color. Make the maxval the larger of 255 and
the maxval of the input image.
The default is -promote=all.
Note that this promotion happens even if no actual padding happens, meaning it
isn't really necessary. The promotion is based on what would be required to
represent padding of the specified color.
This option is valid only when you also specify -color.
This option was new in Netpbm 11.05 (December 2023).
-reportonly
This causes pnmpad to write to Standard Output a description of the
padding it would have done instead of producing an output image. See
below ⟨#reportonly⟩ for a description of this output and ways
to use it.
This option was new in Netpbm 10.89 (December 2019).
-verbose
This causes verbose messages.
REPORT ONLY
When you specify -reportonly, pnmpad does not produce an
output image. Instead, it writes to Standard Output a description of the
padding it would have done without -reportonly.
That description is one line of text, containing 6 decimal numbers of
pixels, separated by spaces:
• left padding
• right padding
• top padding
• bottom padding
• output width
• output height
Example:
4 3 0 2 100 100
One use for this is to make padding which is fancier than the black and
white that pnmpad can do.
In the following example, we pad an image with 10 pixels of gray all
around, without knowing the original image dimensions beforehand. We do
this by generating a gray image with pbmmake and then pasting the
subject image into the middle of it.
The example uses shell arrays, such as exist in Bash, but not Dash.
pad=($(pnmpad -reportonly -left=10 -right=10 -top=10 -bottom=10 input.ppm))
pbmmake -gray ${pad[4]} ${pad[5]} | \
pnmpaste input.ppm ${pad[0]} ${pad[2]} -
HISTORY
The command line syntax was originally more of a traditional Unix syntax,
with single-character margin size options -l, -r, -t,
and -b that took arguments concatenated to the option name, such
as -l50. This is in contrast to the more modern syntax used by
essentially all Netpbm programs, in which an option such as -left
(which can still be abbreviated -l) must have its name and value as
separate command line arguments (e.g. -l 50).
The new syntax was accepted and the old syntax deprecated and removed from
documentation in Netpbm 9.25 (March 2002), and was no longer accepted in
Netpbm 11.05 (December 2023).
The code was broken for most of that time so that an attempt to use the old
syntax would fail anyway. The bug was discovered only in testing; no user
ever reported encountering it.
SEE ALSO
pbmmake(1), pnmpaste(1), pamcut(1), pnmcrop(1), pamcomp(1), pnmmargin(1), pbm(1)
AUTHOR
Copyright (C) 2002 by Martin van Beilen
Copyright (C) 1990 by Angus Duggan
Copyright (C) 1989 by Jef Poskanzer.
Permission to use, copy, modify, and distribute this software and its documentation for
any purpose and without fee is hereby granted, provided that the above copyright notice
appear in all copies and that both that copyright notice and this permission notice appear
in supporting documentation. This software is provided "as is" without express or implied
warranty.
DOCUMENT SOURCE
This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master
documentation is at
http://netpbm.sourceforge.net/doc/pnmpad.html