Provided by: snek_1.9-3build2_all bug

NAME

       snek-uno-instal - Install Snek to Uno

SYNOPSIS

       snek-uno-install [OPTION]... [COMMAND]

DESCRIPTION

       snek-uno-install  installs  the Snek programming language on an ATmega328P Uno board using
       the Optiboot boot loader.

OPTIONS

       -hex <snek.hex>
              Specifies the hex file to load to the board. The default is the currently installed
              version of Snek.

       -port <port>
              Specifies the serial port to use. The default is /dev/ttyACM0.

       -mcu <MCU name>
              Specifies  which  micro controller to expect to find on the board. Some boards have
              m328 while others have m328p. The default is m328p, but if you get an error message
              indicating a mismatch, you can try the other.

OPTIBOOT

       Snek  for the Uno requires Optiboot. If your board does not already have Optiboot, you can
       use the Arduino IDE to install Optiboot on  your  Uno.  Follow  the  instructions  on  the
       Optiboot web site: https://github.com/Optiboot/optiboot to learn how to do that.

AUTHOR

       Keith Packard

                                         snek-uno-install                     SNEK-UNO-INSTALL(1)