Provided by: tvtime_1.0.11-8build2_amd64 bug

NAME

       tvtime-command - control a running tvtime process

SYNOPSIS

       tvtime-command [COMMAND] ...

DESCRIPTION

       tvtime-command  allows  a user to control a running tvtime process by sending it commands.
       It communicates with tvtime through a FIFO, otherwise known as a named pipe.  Commands are
       case-insensitive, and are executed in order.

COMMANDS

       AUTO_ADJUST_PICT
              Restores  the picture settings (brightness, contrast, hue, colour) to their default
              values.

       AUTO_ADJUST_WINDOW
              Automatically resize the window to match the content inside it.  This is  for  when
              you  resize tvtime into, say, a long rectangle, and want it to jump back to being a
              perfect 4:3 box around the content.

       BRIGHTNESS_DOWN
              Lowers the brightness setting on the input.

       BRIGHTNESS_UP
              Increases the brightness setting on the input.

       CHANNEL_[0-9]
              Simulates a keypad number press.

       CHANNEL_ACTIVATE_ALL
              Re-activates all channels in the list.  Use this to re-initialize the channel  list
              before  running  the  scanner  if  you believe some channels are missing, or if new
              channels have become available.

       CHANNEL_DEC / CHANNEL_DOWN
              Move one channel down in the channel list.

       CHANNEL_INC / CHANNEL_UP
              Move one channel up in the channel list.

       CHANNEL_JUMP / CHANNEL_PREV
              Changes to the last channel you were at.  Useful for jumping back and forth between
              two programs on distant channels.

       CHANNEL_RENUMBER
              Renumbers  the current channel.  This will swap the current channel with the number
              you type in.  Use this to  configure  your  station  list  to  suit  preference  or
              locality.

       CHANNEL_SAVE_TUNING
              Saves the current fine tuning settings as a custom channel in the station list.

       CHANNEL_SCAN
              Walks  from  the  current position through the channel list, disabling any channels
              for which no signal is detected.  This command is only available if signal checking
              is enabled.

       CHANNEL_SKIP
              Toggles  the  current channel as being active or disabled in the station list.  You
              can use this to manually scan your channels and enable those with signal or disable
              duplicate stations.

       COLOUR_DOWN / COLOR_DOWN
              Decreases  the  input  colour  picture  setting.   This  will  make  the image less
              colourful until it is black-and-white.

       COLOUR_UP / COLOR_UP
              Increases the input colour picture setting.  This will give the image more colour.

       CONTRAST_DOWN
              Decreases the contrast setting of the input.

       CONTRAST_UP
              Increases the contrast setting of the input.

       DISPLAY_INFO
              This will  re-display  the  OSD  for  the  current  channel,  showing  the  channel
              information, current deinterlacer and framerate, the time, and input settings.

       DISPLAY_MESSAGE
              This  will  display a message along the bottom of the OSD.  Useful for cron jobs or
              other scripts to send notifications to a user running tvtime.

       DOWN   This command provides the dual functionality of channel down or  menu  arrow  down,
              depending  on  whether  the  menu  is currently active.  This command is to be used
              together with the LEFT, RIGHT and UP commands.

       ENTER  Sends a virtual enter command.  Use this when changing the channel:
                  tvtime-command channel_1 channel_5 enter
              will change to channel 15.

       FINETUNE_DOWN
              Decreases the fine tuning setting for the current channel.

       FINETUNE_UP
              Increases the fine tuning for the current channel.

       HUE_DOWN
              Decreases the hue setting of the input.

       HUE_UP Increases the hue setting of the input.

       KEY_EVENT
              Sends a fake  keystroke  event  to  tvtime.   This  is  useful  for  doing  complex
              operations  via  a  remote control, as you can indirect events to tvtime's internal
              key binding system.

       LEFT   This command provides the dual functionality of mixer  volume  down  or  menu  back
              command,  depending on whether the menu is currently active.  This command is to be
              used together with the RIGHT, UP and DOWN commands.

       MENU_DOWN
              In menu mode, this command moves the cursor down one entry in the menu.

       MENU_ENTER
              In menu mode, this command selects the current entry or moves forward one level  in
              the menu.

       MENU_EXIT
              In menu mode, this command shuts off the menu.

       MENU_BACK
              In menu mode, this command moves back one level in the menu.

       MENU_ENTER
              In  menu mode, this command selects the current entry or moves forward one level in
              the menu.

       MENU_UP
              In menu mode, this command moves the cursor up one entry in the menu.

       MIXER_DOWN
              Decreases the volume setting for the Line In device from /dev/mixer.   An  optional
              parameter specifies the percentage to decrease by.

       MIXER_TOGGLE_MUTE
              Toggles  the  mute  status  with  the  mixer,  and  not  with the capture card like
              TOGGLE_MUTE does.

       MIXER_UP
              Increases the volume setting for the Line In device from /dev/mixer.   An  optional
              parameter specifies the percentage to increase by.

       NOOP   The  command  to  do  nothing.   Useful  for  when you want to blank out one of the
              default key bindings in tvtime.

       OVERSCAN_DOWN
              Decreases the overscan compensation amount.  This will show more  of  the  captured
              input.

       OVERSCAN_UP
              Increases  the  overscan  compensation amount.  This will show less of the captured
              input.

       PICTURE
              Selects which picture setting (brightness/contrast/colour/hue) to change using  the
              PICTURE_UP and PICTURE_DOWN commands.

       PICTURE_UP
              Increases the current picture setting value (brightness/contrast/colour/hue).

       PICTURE_DOWN
              Decreases the current picture setting value (brightness/contrast/colour/hue).

       RESTART
              Asks  tvtime  to  restart  itself.  This is used in the menu when we have changed a
              value that we can't yet change at runtime.

       RIGHT  This command provides the dual functionality of  mixer  volume  up  or  menu  enter
              command,  depending on whether the menu is currently active.  This command is to be
              used together with the LEFT, UP and DOWN commands.

       RUN_COMMAND
              Instructs tvtime to spawn a command.  This can be used to start a program  using  a
              key  in  tvtime  or  lirc, such as to spawn mythepg or alevt.  Using tvtime-command
              run_command "xterm" will have tvtime call system( "xterm &" ).

       SAVE_PICTURE_GLOBAL
              Saves the current picture settings as the global defaults.

       SAVE_PICTURE_CHANNEL
              Saves the current picture settings as the defaults for the current channel  on  the
              tuner.

       SCREENSHOT
              Asks tvtime to take a screenshot.  Screenshots are saved to the directory listed as
              the screenshot directory in the tvtime.xml configuration file.  The default is  the
              running user's home directory.

       SET_AUDIO_MODE
              This  command takes a parameter and sets the current audio mode.  Valid options are
              "mono", "stereo", "sap", "lang1" or "lang2".

       SET_DEINTERLACER
              This command takes a parameter and sets the current  deinterlacer.   Valid  options
              are the short name of any of the deinterlacers available in tvtime.

       SET_FRAMERATE
              This  command  takes a parameter and sets the current framerate.  Valid options are
              "full", "top" and "bottom".

       SET_FREQUENCY_TABLE
              This command takes a parameter and sets the current frequency table.

       SET_FULLSCREEN_POSITION
              This command sets where widescreen output will be aligned when in fullscreen  mode,
              either top for the top of the screen, center, or bottom.

       SET_INPUT
              This  command  takes  a parameter and sets the the capture card input (0-n).  Among
              the Inputs are: the tuner, composite, or S-Video connectors on the capture card.

       SET_INPUT_WIDTH
              This command takes a parameter and sets the current input width in pixels.  It will
              be used in tvtime after a restart.

       SET_MATTE
              This  command  sets the matte to apply to the output.  This changes the size of the
              output window, and is useful for watching a 2.35:1 movie in a long, thin window, or
              for  watching  it  at  the  top of the screen using the fullscreen position option.
              Valid options here are 16:9, 1.85:1, 2.35:1 or 4:3.

       SET_NORM
              This command takes a parameter and sets the current television standard.   It  will
              be used in tvtime after a restart.

       SET_STATION
              This  command takes a station name or number as a parameter and changes the channel
              to the station given.

       SET_XMLTV_LANGUAGE
              Set the preferred language code for XMLTV data. The argument can be either the two-
              letter  language  code  according to ISO 639 or a number to select one of the known
              languages.

       SHOW_DEINTERLACER_INFO
              Shows a help screen on the OSD describing the current deinterlacer setting.

       SHOW_MENU
              This command is used to bring up the tvtime setup menu.

       SHOW_STATS
              Shows a debug screen showing statistics about the running instance of tvtime.

       SLEEP  This command sets the sleep timer to tell tvtime to shut itself off after a certain
              amount  of time.  Sending this command will first activate the feature, and sending
              it again will increase the timer up until a maximum value at which point it is shut
              off.

       TOGGLE_ALWAYSONTOP
              If  supported  by  your window manager, this command will ask to have the window be
              put into an "always on top" state, where no other window can be stacked above it.

       TOGGLE_ASPECT
              Toggles the display between  4:3  and  16:9  mode.   Use  16:9  mode  if  you  have
              configured  an  external DVD player or satellite receiver to output anamorphic 16:9
              content.

       TOGGLE_AUDIO_MODE
              Toggles between the available audio modes on this channel.  It can take  some  time
              before the driver discovers that modes are available.

       TOGGLE_BARS
              Asks  tvtime to display colourbars.  The colourbars are generated by tvtime and are
              not related to the capture card, but simply to help configure your video  card  and
              display  device.   Once  your  settings  are  correct  with  these  colourbars, try
              colourbars from an input source like an external DVD  player  and  make  sure  they
              match up.

       TOGGLE_CC
              Enables  closed  caption  information to be displayed in the tvtime window.  Closed
              captioning is only available if you have enabled VBI  reading  in  your  tvtime.xml
              configuration file.

       TOGGLE_CHANNEL_PAL_DK
              For PAL users, toggles the audio mode of the current channel between the PAL-BG and
              PAL-DK audio norms.

       TOGGLE_CHROMA_KILL
              Enables or disables the chroma killer filter,  which  makes  the  input  black  and
              white.    Useful  when  watching  a  black-and-white  movie  to  avoid  chrominance
              artifacts.

       TOGGLE_COLOR_INVERT / TOGGLE_COLOUR_INVERT
              Turns on or off the colour invert filter.  This is (apparently) useful for users of
              the Australian cable company Optus who want to avoid using the decryption boxes and
              tune using their capture card directly.

       TOGGLE_DEINTERLACER
              This toggles between the available deinterlacing methods.

       TOGGLE_FULLSCREEN
              This toggles between fullscreen and windowed mode.

       TOGGLE_FRAMERATE
              Toggles the framerate at which tvtime will output.  Options  are  full  frame  rate
              (every  field  deinterlaced  to  a  frame),  half  frame  rate TFF (every top field
              deinterlaced to a frame) and half frame rate BFF (every bottom  field  deinterlaced
              to a frame).

       TOGGLE_INPUT
              Switches  the capture card input used.  Among the Inputs are: the tuner, composite,
              or S-Video connectors on the capture card.

       TOGGLE_MATTE
              Switches between the available mattes.  This cuts off the top  and  bottom  of  the
              input picture to help fit the window to the image content.

       TOGGLE_MIRROR
              Turns on or off the mirror filter, which flips the input.  This is useful for using
              tvtime with mirroring projectors, although I don't think it will actually  work  as
              intended yet since we don't mirror the OSD output.  :)  Comments appreciated.

       TOGGLE_MUTE
              Toggles the mute state in the capture card (and not in your soundcard).

       TOGGLE_NTSC_CABLE_MODE
              Toggles the NTSC cable mode settings: Standard, IRC, and HRC are available.

       TOGGLE_PAL_DK_AUDIO
              For  PAL  users,  toggles the default audio mode of all channels between the PAL-BG
              and PAL-DK audio norms.

       TOGGLE_PAL_SECAM
              Toggles between PAL and SECAM on the current channel.  This feature is  useful  for
              regions  which  receive  both  PAL  and  SECAM  channels,  such  that tvtime can be
              configured on a per-channel basis for the correct norm.

       TOGGLE_PAUSE
              Enters pause mode.  Pause mode is a debugging feature  used  to  test  deinterlacer
              filters  by  allowing  to  see  the  output  of a single set of frames with various
              deinterlacers.

       TOGGLE_PULLDOWN_DETECTION
              Enables or disables the 2–3 pulldown detection feature for NTSC input.

       TOGGLE_QUIET_SCREENSHOTS
              When this option is turned on, screenshots will not announce themselves on the OSD.
              This  is useful if you intend to take a lot of screenshots, and don't want the text
              to interrupt your TV watching or appear in other screenshots.

       TOGGLE_SIGNAL_DETECTION
              Toggles on and off  tvtime's  signal  detection  code.   Signal  detection  enables
              features  like  channel scanning and increases responsiveness on channels with poor
              reception, but may make it impossible to watch stations where the reception is  too
              bad for the card to detect it reliably.

       TOGGLE_XDS
              Toggles  on  and  off  tvtime's XDS decoding code.  XDS is used to send information
              about the channel including the  network  name  and  call  letters,  and  sometimes
              information  about the current show.  This information is then shown on the OSD and
              saved to the stationlist.xml file.

       TOGGLE_XMLTV_LANGUAGE
              Toggles which language to show by  default  from  the  XMLTV  file  from  the  ones
              available in the file.

       UP     This  command  provides  the  dual  functionality  of  channel up or menu arrow up,
              depending on whether the menu is currently active.  This  command  is  to  be  used
              together with the LEFT, RIGHT and DOWN commands.

       QUIT   Asks the running tvtime process to exit.

AUTHORS

       Billy Biggs, Stewart Allen.

SEE ALSO

       tvtime(1), tvtime.xml(5), stationlist.xml(5).