Provided by: twolame_0.4.0-2build3_amd64 bug

NAME

       twolame - an optimised MPEG Audio Layer 2 (MP2) encoder

SYNOPSIS

       twolame [options] <infile> [outfile]

DESCRIPTION

       TwoLAME is an optimised MPEG Audio Layer 2 (MP2) encoder based on tooLAME by Mike Cheng,
       which in turn is based upon the ISO dist10 code and portions of LAME. Encoding is
       performed by the libtwolame library backend.

OPTIONS

   Input File
       twolame uses libsndfile for reading the input sound file, so the input file can be in any
       format supported by libsndfile. To read raw PCM audio from STDIN, then use - as the input
       filename.

   Output File
       If no output filename is specified, then suffix of the input filename is automatically
       changed to .mp2. To write the encoded audio to STDOUT then use - as the output filename.

   Input Options
       -r, --raw-input
           Specifies that input is raw signed PCM audio. If audio is stereo, than audio samples
           are interleaved between the two channels.

       -x, --byte-swap
           Force byte-swapping of the input. Endian detection is performed automatically by
           libsndfile, so this option shouldn’t normally be needed.

       -s, --samplerate <int>
           If inputting raw PCM sound, you must specify the sample rate of the audio in Hz. Valid
           sample rates: 16000, 22050, 24000, 32000, 44100, 48000Hz. Default sample rate is
           44100Hz.

       --samplesize <int>
           Specifies the sample size (in bits) of the raw PCM audio. Valid sample sizes: 8, 16,
           24, 32. Default sample size is 16-bit.

       -N, --channels <int>
           If inputting raw PCM sound, you must specify the number of channels in the input
           audio. Default number of channels is 2.

       -g, --swap-channels
           Swap the Left and Right channels of a stereo input file.

       --scale <float>
           Scale the input audio prior to encoding. All of the input audio is multiplied by
           specified value. Value between 0 and 1 will reduce the audio gain, and a value above 1
           will increase the gain of the audio.

       --scale-l <float>
           Same as --scale, but only affects the left channel.

       --scale-r <float>
           Same as --scale, but only affects the right channel.

   Output Options
       -m, --mode <char>
           Choose the mode of the resulting audio. Default is auto.

           •   "a" auto - choose mode automatically based on the input

           •   "s" stereo

           •   "d" dual channel

           •   "j" joint stereo

           •   "m" mono

       -a, --downmix
           If the input file is stereo then, downmix the left and right input channels into a
           single mono channel.

       -b, --bitrate <int>
           Sets the total bitrate (in kbps) for the output file. The default bitrate depends on
           the number of input channels and samplerate.

               ------------------------------
               Sample Rate   Mono    Stereo
               ------------------------------
               48000         96      192
               44100         96      192
               32000         80      160
               24000         48      96
               22050         48      96
               16000         32      64
               ------------------------------

       -P, --psyc-mode <int>
           Choose the psycho-acoustic model to use (-1 to 4). Model number -1 is turns off
           psycho-acoustic modelling and uses fixed default values instead. Please see the file
           psycho for a full description of each of the models available. Default model is 3.

       -v, --vbr
           Enable VBR mode. See vbr documentation file for details. Default VBR level is 5.0.

       -V, --vbr-level <float>
           Enable VBR mode and set quality level. The higher the number the better the quality.
           Maximum range is -50 to 50 but useful range is -10 to 10. See vbr documentation file
           for details.

       -l, --ath <float>
           Set the ATH level. Default level is 0.0.

       -q, --quick <int>
           Enable quick mode. Only re-calculate psycho-acoustic model every specified number of
           frames.

       -S, --single-frame
           Enables single frame mode: only a single frame of MPEG audio is output and then the
           program terminates.

   Miscellaneous Options
       -c, --copyright
           Turn on Copyright flag in output bitstream.

       -o, --non-original
           Turn off Original flag in output bitstream.

       --original
           Turn on Original flag in output bitstream.

       -p, --protect
           Enable CRC error protection in output bitstream. An extra 16-bit checksum is added to
           frames.

       -d, --padding
           Turn on padding in output bitstream.

       -R, --reserve <int>
           Reserve specified number of bits in the each from of the output bitstream.

       -e, --deemphasis <char>
           Set the de-emphasis type (n/c/5). Default is none.

       -E, --energy
           Turn on energy level extensions.

   Verbosity Options
       -t, --talkativity <int>
           Set the amount of information to be displayed on stderr (0 to 10). Default is 2.

       --quiet
           Don’t send any messages to stderr, unless there is an error. (Same as --talkativity=0)

       --brief
           Only display a minimal number of messages while encoding. This setting is quieter than
           the default talkativity setting. (Same as --talkativity=1)

       --verbose
           Display an increased number of messages on stderr. This setting is useful to diagnose
           problems. (Same as --talkativity=4)

RETURN CODES

       If encoding completes successfully, then twolame will return 0. However if encoding is not
       successful, then it will return one of the following codes.

       •   1 (No encoding performed)

       •   2 (Error opening input file)

       •   4 (Error opening output file)

       •   6 (Error allocating memory)

       •   8 (Error in chosen encoding parameters)

       •   10 (Error reading input audio)

       •   12 (Error occurred while encoding)

       •   14 (Error writing output audio)

EXAMPLES

       This will encode sound.wav to sound.mp2 using the default constant bitrate of 192 kbps and
       using the default psycho-acoustic model (model 3):

           twolame sound.wav

       Constant bitrate of 160kbps and joint stereo encoding, saved to file sound_160.mp2:

           twolame -b 160 -m j sound.aiff sound_160.mp2

       Encode sound.wav to newfile.mp2 using psycho-acoustic model 2 and encoding with variable
       bitrate:

           twolame -P 2 -v sound.wav newfile.mp2

       Same as example above, except that the negative value of the "-V" argument means that the
       lower bitrates will be favoured over the higher ones:

           twolame -P 2 -V -5 sound.wav newfile.mp2

       Resample audio file using sox and pipe straight through twolame:

           sox sound_11025.aiff -t raw -r 16000 | twolame -r -s 16000 - - > out.mp2

AUTHORS

       The twolame frontend was (re)written by Nicholas J Humfrey. The libtwolame library is
       based on toolame by Mike Cheng. For a full list of authors, please see the AUTHORS file.

RESOURCES

       TwoLAME web site: http://www.twolame.org/

SEE ALSO

       lame(1), mpg123(1), madplay(1), sox(1)

COPYING

       Copyright © 2004-2018 The TwoLAME Project. Free use of this software is granted under the
       terms of the GNU Lesser General Public License (LGPL).

AUTHOR

       Nicholas J Humfrey <njh@aelius.com>
           Author.

                                            10/11/2019                                 TWOLAME(1)