Provided by: uxplay_1.68.2-1build2_amd64
NAME
uxplay - start AirPlay server
SYNOPSIS
uxplay [-n name] [-s wxh] [-p [n]] [more OPTIONS ...]
DESCRIPTION
UxPlay 1.68: An open-source AirPlay mirroring (+ audio streaming) server:
OPTIONS
-n name Specify the network name of the AirPlay server -nh Do NOT append "@hostname" at end of AirPlay server name -pin[xxxx]Use a 4-digit pin code to control client access (default: no) without option, pin is random: optionally use fixed pin xxxx. -reg [fn] Keep a register in $HOME/.uxplay.register to verify returning client pin-registration; (option: use file "fn" for this) -vsync[x] Mirror mode: sync audio to video using timestamps (default) x is optional audio delay: millisecs, decimal, can be neg. -vsync no Switch off audio/(server)video timestamp synchronization. -async[x] Audio-Only mode: sync audio to client video (default: no). -async no Switch off audio/(client)video timestamp synchronization. -db l[:h] Set minumum volume attenuation to l dB (decibels, negative); optional: set maximum to h dB (+ or -); default -30.0:0.0 -taper Use a "tapered" AirPlay volume-control profile. -s wxh[@r]Set display resolution [refresh_rate] default 1920x1080[@60] -o Set display "overscanned" mode on (not usually needed) -fs Full-screen (only works with X11, Wayland and VAAPI) -p Use legacy ports UDP 6000:6001:7011 TCP 7000:7001:7100 -p n Use TCP and UDP ports n,n+1,n+2. range 1024-65535 use "-p n1,n2,n3" to set each port, "n1,n2" for n3 = n2+1 "-p tcp n" or "-p udp n" sets TCP or UDP ports separately. -avdec Force software h264 video decoding with libav decoder. -vp prs Choose GStreamer h264 parser; default "h264parse" -vd dec Choose GStreamer h264 decoder; default "decodebin" choices: (software) avdec_h264; (hardware) v4l2h264dec, nvdec, nvh264dec, vaapih264dec, vtdec, ... -vc cnv Choose GStreamer videoconverter; default "videoconvert" another choice when using v4l2h264dec: v4l2convert. -vs sink Choose the GStreamer videosink; default "autovideosink" choices: ximagesink,xvimagesink,vaapisink,glimagesink, gtksink,waylandsink,osxvideosink,kmssink,d3d11videosink,... -vs 0 Streamed audio only, with no video display window. -v4l2 Use Video4Linux2 for GPU hardware h264 video decoding. -bt709 Sometimes needed for Raspberry Pi with GStreamer < 1.22 -as sink Choose the GStreamer audiosink; default "autoaudiosink" choices:pulsesink,alsasink,pipewiresink,osssink,oss4sink, jackaudiosink,osxaudiosink,wasapisink,directsoundsink,.. -as 0 (or -a) Turn audio off, streamed video only. -al x Audio latency in seconds (default 0.25) reported to client. -ca fn In Airplay Audio (ALAC) mode, write cover-art to file fn. -reset n Reset after 3n seconds client silence (default 5, 0=never). -nc Do not close video window when client stops mirroring -nohold Drop current connection when new client connects. -restrict Restrict clients to those specified by "-allow deviceID". Uxplay displays deviceID when a client attempts to connect. Use "-restrict no" for no client restrictions (default). -allow id Permit deviceID = id to connect if restrictions are imposed. -block id Always block connections from deviceID = id. -FPSdata Show video-streaming performance reports sent by client. -fps n Set maximum allowed streaming framerate, default 30 -f {H|V|I}Horizontal|Vertical flip, or both=Inversion=rotate 180 deg -r {R|L} Rotate 90 degrees Right (cw) or Left (ccw) -m [mac] Set MAC address (also Device ID); use for concurrent UxPlays if mac xx:xx:xx:xx:xx:xx is not given, a random MAC is used. -key [fn] Store private key in $HOME/.uxplay.pem (or in file "fn") -dacp [fn]Export client DACP information to file $HOME/.uxplay.dacp (option to use file "fn" instead); used for client remote. -vdmp [n] Dump h264 video output to "fn.h264"; fn="videodump", change with "-vdmp [n] filename". If [n] is given, file fn.x.h264 x=1,2,.. opens whenever a new SPS/PPS NAL arrives, and <=n NAL units are dumped. -admp [n] Dump audio output to "fn.x.fmt", fmt ={aac, alac, aud}, x =1,2,..; fn="audiodump"; change with "-admp [n] filename". x increases when audio format changes. If n is given, <= n audio packets are dumped. "aud"= unknown format. -d Enable debug logging -v Displays version information -h Displays help information
FILES
Options in one of $UXPLAYRC, or ~/.uxplayrc, or ~/.config/uxplayrc are applied first (command-line options may modify them). Format: one option per line, no initial "-"; lines beginning with "#" ignored.
AUTHORS
Various, see website or distribution.
COPYRIGHT
Various, see website or distribution. License: GPL v3+: GNU GPL version 3 or later. (some parts LGPL v.2.1+ or MIT).
SEE ALSO
Website: <https://github.com/FDH2/UxPlay>