Provided by: w3cam_0.7.2-6.4build2_amd64 bug

NAME

       vidcat - capture a frame from a video4linux device

SYNOPSIS

       vidcat   [-h?blgV]   [-d   <device>]  [-f  jpeg|ppm|png]  [-i  tv|comp1|com1|s-video]  [-n
       pal|ntsc|secam] [-q <1..100>] [-s WIDTHxHEIGHT] [-o <file>]

DESCRIPTION

       vidcat captures a frame from a video4linux device and writes the result  to  the  standard
       output device. With the following options you can define output format, size etc..

OPTIONS

       -d device
              Use an alternate v4l device, '/dev/video' is the default device.

       -b     This  applies  only  to  PPM  output.  With this option the PPM ouput is written in
              binary mode.

       -f ppm|jpeg|png|yuv4mpeg
              Define the file format to use for the output stream. The default is "jpeg".

       -g     Use greyscale instead of RGB24 for the output data.

       -i tv|comp1|comp2|s-video
              Set the input channel to use. The default value is none, which means the preset  of
              the device is used.

       -l     Loops until CTRL+C is pressed. This is the default for the YUV4MPEG output.

       -n pal|ntsc|secam
              Select the input norm for the grabbing device. The default value is none.

       -o file
              Use the named file for output instead of standard out.

       -p c|g|y|Y
              Set the palette to use: c = RGB24, g=GREY, y=YUV420P, Y=YUV422P.

       -q 1..100
              Set the quality for JPEG output. The value could be a number between 1 and 100. The
              default value is 80.

       -s WIDTHxHEIGHT
              Define the size of the output frame in pixels. The default setting is 320x240.

       -V     Show version number and exit.

AUTHOR

       Rasca
       http://home.pages.de/~rasca/
       VIDCAT is published under the GNU General Public License