Provided by: guestfs-tools_1.52.0-2ubuntu5_amd64 bug

NAME

       virt-edit - Edit a file in a virtual machine

SYNOPSIS

        virt-edit [--options] -d domname file [file ...]

        virt-edit [--options] -a disk.img [-a disk.img ...] file [file ...]

        virt-edit [-d domname|-a disk.img] file -e 'expr'

       Old-style:

        virt-edit domname file

        virt-edit disk.img [disk.img ...] file

WARNING

       Using "virt-edit" on live virtual machines, or concurrently with other disk editing tools,
       can be dangerous, potentially causing disk corruption.  The virtual machine must be shut
       down before you use this command, and disk images must not be edited concurrently.

DESCRIPTION

       "virt-edit" is a command line tool to edit "file" where each "file" exists in the named
       virtual machine (or disk image).

       Multiple filenames can be given, in which case they are each edited in turn.  Each
       filename must be a full path, starting at the root directory (starting with '/').

       If you want to just view a file, use virt-cat(1).

       For more complex cases you should look at the guestfish(1) tool (see "USING GUESTFISH"
       below).

       "virt-edit" cannot be used to create a new file.  guestfish(1) can do that and much more.

EXAMPLES

       Edit the named files interactively:

        virt-edit -d mydomain /boot/grub/grub.conf

        virt-edit -d mydomain /etc/passwd

       For Windows guests, some Windows paths are understood:

        virt-edit -d mywindomain 'c:\autoexec.bat'

       If Perl is installed, you can also edit files non-interactively (see "NON-INTERACTIVE
       EDITING" below).  To change the init default level to 5:

        virt-edit -d mydomain /etc/inittab -e 's/^id:.*/id:5:initdefault:/'

OPTIONS

       --help
           Display brief help.

       -a file
       --add file
           Add file which should be a disk image from a virtual machine.  If the virtual machine
           has multiple block devices, you must supply all of them with separate -a options.

           The format of the disk image is auto-detected.  To override this and force a
           particular format use the --format=.. option.

       -a URI
       --add URI
           Add a remote disk.  See "ADDING REMOTE STORAGE" in guestfish(1).

       -b EXTENSION
       --backup EXTENSION
           Create a backup of the original file in the guest disk image.  The backup has the
           original filename with "extension" added.

           Usually the first character of "extension" would be a dot "."  so you would write:

            virt-edit -b .orig [etc]

           By default, no backup file is made.

       --blocksize=512
       --blocksize=4096
       --blocksize
           This parameter sets the sector size of the disk image.  It affects all explicitly
           added subsequent disks after this parameter.  Using --blocksize with no argument
           switches the disk sector size to the default value which is usually 512 bytes.  See
           also "guestfs_add_drive_opts" in guestfs(3).

       -c URI
       --connect URI
           If using libvirt, connect to the given URI.  If omitted, then we connect to the
           default libvirt hypervisor.

           If you specify guest block devices directly, then libvirt is not used at all.

       -d GUEST
       --domain GUEST
           Add all the disks from the named libvirt guest.  Domain UUIDs can be used instead of
           names.

       --echo-keys
           When prompting for keys and passphrases, virt-edit normally turns echoing off so you
           cannot see what you are typing.  If you are not worried about Tempest attacks and
           there is no one else in the room you can specify this flag to see what you are typing.

       -e EXPR
       --edit EXPR
       --expr EXPR
           Instead of launching the external editor, non-interactively apply the Perl expression
           "EXPR" to each line in the file.  See "NON-INTERACTIVE EDITING" below.

           Be careful to properly quote the expression to prevent it from being altered by the
           shell.

           Note that this option is only available when Perl 5 is installed.

       --format=raw|qcow2|..
       --format
           The default for the -a option is to auto-detect the format of the disk image.  Using
           this forces the disk format for -a options which follow on the command line.  Using
           --format with no argument switches back to auto-detection for subsequent -a options.

           For example:

            virt-edit --format=raw -a disk.img file

           forces raw format (no auto-detection) for disk.img.

            virt-edit --format=raw -a disk.img --format -a another.img file

           forces raw format (no auto-detection) for disk.img and reverts to auto-detection for
           another.img.

           If you have untrusted raw-format guest disk images, you should use this option to
           specify the disk format.  This avoids a possible security problem with malicious
           guests (CVE-2010-3851).

       --key SELECTOR
           Specify a key for LUKS, to automatically open a LUKS device when using the inspection.

           --key NAME:key:KEY_STRING
           --key UUID:key:KEY_STRING
           --key all:key:KEY_STRING
               "NAME" is the libguestfs device name (eg. "/dev/sda1").  "UUID" is the device
               UUID.  "all" means try the key against any encrypted device.

               Use the specified "KEY_STRING" as passphrase.

           --key NAME:file:FILENAME
           --key UUID:file:FILENAME
           --key all:file:FILENAME
               Read the passphrase from FILENAME.

           --key NAME:clevis
           --key UUID:clevis
           --key all:clevis
               Attempt passphrase-less unlocking for the device with Clevis, over the network.
               Please refer to "ENCRYPTED DISKS" in guestfs(3) for more information on network-
               bound disk encryption (NBDE).

               Note that if any such option is present on the command line, QEMU user networking
               will be automatically enabled for the libguestfs appliance.

       --keys-from-stdin
           Read key or passphrase parameters from stdin.  The default is to try to read
           passphrases from the user by opening /dev/tty.

           If there are multiple encrypted devices then you may need to supply multiple keys on
           stdin, one per line.

       -m dev[:mountpoint[:options[:fstype]]]
       --mount dev[:mountpoint[:options[:fstype]]]
           Mount the named partition or logical volume on the given mountpoint.

           If the mountpoint is omitted, it defaults to /.

           Specifying any mountpoint disables the inspection of the guest and the mount of its
           root and all of its mountpoints, so make sure to mount all the mountpoints needed to
           work with the filenames given as arguments.

           If you don’t know what filesystems a disk image contains, you can either run guestfish
           without this option, then list the partitions, filesystems and LVs available (see
           "list-partitions", "list-filesystems" and "lvs" commands), or you can use the
           virt-filesystems(1) program.

           The third (and rarely used) part of the mount parameter is the list of mount options
           used to mount the underlying filesystem.  If this is not given, then the mount options
           are either the empty string or "ro" (the latter if the --ro flag is used).  By
           specifying the mount options, you override this default choice.  Probably the only
           time you would use this is to enable ACLs and/or extended attributes if the filesystem
           can support them:

            -m /dev/sda1:/:acl,user_xattr

           Using this flag is equivalent to using the "mount-options" command.

           The fourth part of the parameter is the filesystem driver to use, such as "ext3" or
           "ntfs". This is rarely needed, but can be useful if multiple drivers are valid for a
           filesystem (eg: "ext2" and "ext3"), or if libguestfs misidentifies a filesystem.

       -v
       --verbose
           Enable verbose messages for debugging.

       -V
       --version
           Display version number and exit.

       -x  Enable tracing of libguestfs API calls.

OLD-STYLE COMMAND LINE ARGUMENTS

       Previous versions of virt-edit allowed you to write either:

        virt-edit disk.img [disk.img ...] file

       or

        virt-edit guestname file

       whereas in this version you should use -a or -d respectively to avoid the confusing case
       where a disk image might have the same name as a guest.

       For compatibility the old style is still supported.

NON-INTERACTIVE EDITING

       "virt-edit" normally calls out to $EDITOR (or vi) so the system administrator can
       interactively edit the file.

       There are two ways also to use "virt-edit" from scripts in order to make automated edits
       to files.  (Note that although you can use "virt-edit" like this, it’s less error-prone to
       write scripts directly using the libguestfs API and Augeas for configuration file
       editing.)

       The first method is to temporarily set $EDITOR to any script or program you want to run.
       The script is invoked as "$EDITOR tmpfile" and it should update "tmpfile" in place however
       it likes.

       The second method is to use the -e parameter of "virt-edit" to run a short Perl snippet in
       the style of sed(1).  For example to replace all instances of "foo" with "bar" in a file:

        virt-edit -d domname filename -e 's/foo/bar/'

       The full power of Perl regular expressions can be used (see perlre(1)).  For example to
       delete root’s password you could do:

        virt-edit -d domname /etc/passwd -e 's/^root:.*?:/root::/'

       What really happens is that the snippet is evaluated as a Perl expression for each line of
       the file.  The line, including the final "\n", is passed in $_ and the expression should
       update $_ or leave it unchanged.

       To delete a line, set $_ to the empty string.  For example, to delete the "apache" user
       account from the password file you can do:

        virt-edit -d mydomain /etc/passwd -e '$_ = "" if /^apache:/'

       To insert a line, prepend or append it to $_.  However appending lines to the end of the
       file is rather difficult this way since there is no concept of "last line of the file" -
       your expression just doesn't get called again.  You might want to use the first method
       (setting $EDITOR) if you want to do this.

       The variable $lineno contains the current line number.  As is traditional, the first line
       in the file is number 1.

       The return value from the expression is ignored, but the expression may call "die" in
       order to abort the whole program, leaving the original file untouched.

       Remember when matching the end of a line that $_ may contain the final "\n", or (for DOS
       files) "\r\n", or if the file does not end with a newline then neither of these.  Thus to
       match or substitute some text at the end of a line, use this regular expression:

        /some text(\r?\n)?$/

       Alternately, use the perl "chomp" function, being careful not to chomp $_ itself (since
       that would remove all newlines from the file):

        my $m = $_; chomp $m; $m =~ /some text$/

WINDOWS PATHS

       "virt-edit" has a limited ability to understand Windows drive letters and paths (eg.
       E:\foo\bar.txt).

       If and only if the guest is running Windows then:

       •   Drive letter prefixes like "C:" are resolved against the Windows Registry to the
           correct filesystem.

       •   Any backslash ("\") characters in the path are replaced with forward slashes so that
           libguestfs can process it.

       •   The path is resolved case insensitively to locate the file that should be edited.

       There are some known shortcomings:

       •   Some NTFS symbolic links may not be followed correctly.

       •   NTFS junction points that cross filesystems are not followed.

USING GUESTFISH

       guestfish(1) is a more powerful, lower level tool which you can use when "virt-edit"
       doesn't work.

       Using "virt-edit" is approximately equivalent to doing:

        guestfish --rw -i -d domname edit /file

       where "domname" is the name of the libvirt guest, and /file is the full path to the file.

       The command above uses libguestfs’s guest inspection feature and so does not work on
       guests that libguestfs cannot inspect, or on things like arbitrary disk images that don't
       contain guests.  To edit a file on a disk image directly, use:

        guestfish --rw -a disk.img -m /dev/sda1 edit /file

       where disk.img is the disk image, /dev/sda1 is the filesystem within the disk image to
       edit, and /file is the full path to the file.

       "virt-edit" cannot create new files.  Use the guestfish commands "touch", "write" or
       "upload" instead:

        guestfish --rw -i -d domname touch /newfile

        guestfish --rw -i -d domname write /newfile "new content"

        guestfish --rw -i -d domname upload localfile /newfile

ENVIRONMENT VARIABLES

       "EDITOR"
           If set, this string is used as the editor.  It may contain arguments, eg. "emacs -nw"

           If not set, "vi" is used.

EXIT STATUS

       This program returns 0 if successful, or non-zero if there was an error.

SEE ALSO

       guestfs(3), guestfish(1), virt-cat(1), virt-copy-in(1), virt-tar-in(1),
       http://libguestfs.org/, perl(1), perlre(1).

AUTHOR

       Richard W.M. Jones http://people.redhat.com/~rjones/

COPYRIGHT

       Copyright (C) 2009-2023 Red Hat Inc.

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation; either
       version 2 of the License, or (at your option) any later version.

       This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
       See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
       Boston, MA 02110-1301 USA.

BUGS

       To get a list of bugs against libguestfs, use this link:
       https://bugzilla.redhat.com/buglist.cgi?component=libguestfs&product=Virtualization+Tools

       To report a new bug against libguestfs, use this link:
       https://bugzilla.redhat.com/enter_bug.cgi?component=libguestfs&product=Virtualization+Tools

       When reporting a bug, please supply:

       •   The version of libguestfs.

       •   Where you got libguestfs (eg. which Linux distro, compiled from source, etc)

       •   Describe the bug accurately and give a way to reproduce it.

       •   Run libguestfs-test-tool(1) and paste the complete, unedited output into the bug
           report.