Provided by: xen-utils-common_4.17.3+10-g091466ba55-1.1ubuntu3_amd64 bug

NAME

       xl - Xen management tool, based on libxenlight

SYNOPSIS

       xl subcommand [args]

DESCRIPTION

       The xl program is the new tool for managing Xen guest domains. The program can be used to
       create, pause, and shutdown domains. It can also be used to list current domains, enable
       or pin VCPUs, and attach or detach virtual block devices.

       The basic structure of every xl command is almost always:

         xl subcommand [OPTIONS] domain-id

       Where subcommand is one of the subcommands listed below, domain-id is the numeric domain
       id, or the domain name (which will be internally translated to domain id), and OPTIONS are
       subcommand specific options.  There are a few exceptions to this rule in the cases where
       the subcommand in question acts on all domains, the entire machine, or directly on the Xen
       hypervisor.  Those exceptions will be clear for each of those subcommands.

NOTES

       start the script /etc/init.d/xencommons at boot time
           Most xl operations rely upon xenstored and xenconsoled: make sure you start the script
           /etc/init.d/xencommons at boot time to initialize all the daemons needed by xl.

       setup a xenbr0 bridge in dom0
           In the most common network configuration, you need to setup a bridge in dom0 named
           xenbr0 in order to have a working network in the guest domains.  Please refer to the
           documentation of your Linux distribution to know how to setup the bridge.

       autoballoon
           If you specify the amount of memory dom0 has, passing dom0_mem to Xen, it is highly
           recommended to disable autoballoon. Edit /etc/xen/xl.conf and set it to 0.

       run xl as root
           Most xl commands require root privileges to run due to the communications channels
           used to talk to the hypervisor.  Running as non root will return an error.

GLOBAL OPTIONS

       Some global options are always available:

       -v  Verbose.

       -N  Dry run: do not actually execute the command.

       -f  Force execution: xl will refuse to run some commands if it detects that xend is also
           running, this option will force the execution of those commands, even though it is
           unsafe.

       -t  Always use carriage-return-based overwriting for displaying progress messages without
           scrolling the screen.  Without -t, this is done only if stderr is a tty.

       -T  Include timestamps and pid of the xl process in output.

DOMAIN SUBCOMMANDS

       The following subcommands manipulate domains directly.  As stated previously, most
       commands take domain-id as the first parameter.

       button-press domain-id button
           This command is deprecated. Please use "xl trigger" instead.

           Indicate an ACPI button press to the domain, where button can be 'power' or 'sleep'.
           This command is only available for HVM domains.

       create [configfile] [OPTIONS]
           The create subcommand takes a config file as its first argument: see xl.cfg(5) for
           full details of the file format and possible options.  If configfile is missing xl
           creates the domain assuming the default values for every option.

           configfile has to be an absolute path to a file.

           Create will return as soon as the domain is started.  This does not mean the guest OS
           in the domain has actually booted, or is available for input.

           If the -F option is specified, create will start the domain and not return until its
           death.

           OPTIONS

           -q, --quiet
               No console output.

           -f=FILE, --defconfig=FILE
               Use the given configuration file.

           -p  Leave the domain paused after it is created.

           -F  Run in foreground until death of the domain.

           -V, --vncviewer
               Attach to domain's VNC server, forking a vncviewer process.

           -A, --vncviewer-autopass
               Pass the VNC password to vncviewer via stdin.

           -c  Attach console to the domain as soon as it has started.  This is useful for
               determining issues with crashing domains and just as a general convenience since
               you often want to watch the domain boot.

           key=value
               It is possible to pass key=value pairs on the command line to provide options as
               if they were written in the configuration file; these override whatever is in the
               configfile.

               NB: Many config options require characters such as quotes or brackets which are
               interpreted by the shell (and often discarded) before being passed to xl,
               resulting in xl being unable to parse the value correctly.  A simple work-around
               is to put all extra options within a single set of quotes, separated by
               semicolons.  (See below for an example.)

           EXAMPLES

           with extra parameters
                 xl create hvm.cfg 'cpus="0-3"; pci=["01:05.1","01:05.2"]'

               This creates a domain with the file hvm.cfg, but additionally pins it to cpus 0-3,
               and passes through two PCI devices.

       config-update domain-id [configfile] [OPTIONS]
           Update the saved configuration for a running domain. This has no immediate effect but
           will be applied when the guest is next restarted. This command is useful to ensure
           that runtime modifications made to the guest will be preserved when the guest is
           restarted.

           Since Xen 4.5 xl has improved capabilities to handle dynamic domain configuration
           changes and will preserve any changes made at runtime when necessary. Therefore it
           should not normally be necessary to use this command any more.

           configfile has to be an absolute path to a file.

           OPTIONS

           -f=FILE, --defconfig=FILE
               Use the given configuration file.

           key=value
               It is possible to pass key=value pairs on the command line to provide options as
               if they were written in the configuration file; these override whatever is in the
               configfile.  Please see the note under create on handling special characters when
               passing key=value pairs on the command line.

       console [OPTIONS] domain-id
           Attach to the console of a domain specified by domain-id.  If you've set up your
           domains to have a traditional login console this will look much like a normal text
           login screen.

           Use the key combination Ctrl+] to detach from the domain console.

           OPTIONS

           -t [pv|serial]
               Connect to a PV console or connect to an emulated serial console.  PV consoles are
               the only consoles available for PV domains while HVM domains can have both. If
               this option is not specified it defaults to emulated serial for HVM guests and PV
               console for PV guests.

           -n NUM
               Connect to console number NUM. Console numbers start from 0.

       destroy [OPTIONS] domain-id
           Immediately terminate the domain specified by domain-id.  This doesn't give the domain
           OS any chance to react, and is the equivalent of ripping the power cord out on a
           physical machine.  In most cases you will want to use the shutdown command instead.

           OPTIONS

           -f  Allow domain 0 to be destroyed.  Because a domain cannot destroy itself, this is
               only possible when using a disaggregated toolstack, and is most useful when using
               a hardware domain separated from domain 0.

       domid domain-name
           Converts a domain name to a domain id.

       domname domain-id
           Converts a domain id to a domain name.

       rename domain-id new-name
           Change the domain name of a domain specified by domain-id to new-name.

       dump-core domain-id [filename]
           Dumps the virtual machine's memory for the specified domain to the filename specified,
           without pausing the domain.  The dump file will be written to a distribution specific
           directory for dump files, for example: /var/lib/xen/dump/dump.

       help [--long]
           Displays the short help message (i.e. common commands) by default.

           If the --long option is specified, it displays the complete set of xl subcommands,
           grouped by function.

       list [OPTIONS] [domain-id ...]
           Displays information about one or more domains.  If no domains are specified it
           displays information about all domains.

           OPTIONS

           -l, --long
               The output for xl list is not the table view shown below, but instead presents the
               data as a JSON data structure.

           -Z, --context
               Also displays the security labels.

           -v, --verbose
               Also displays the domain UUIDs, the shutdown reason and security labels.

           -c, --cpupool
               Also displays the cpupool the domain belongs to.

           -n, --numa
               Also displays the domain NUMA node affinity.

           EXAMPLE

           An example format for the list is as follows:

               Name                                        ID   Mem VCPUs      State   Time(s)
               Domain-0                                     0   750     4     r-----   11794.3
               win                                          1  1019     1     r-----       0.3
               linux                                        2  2048     2     r-----    5624.2

           Name is the name of the domain.  ID the numeric domain id.  Mem is the desired amount
           of memory to allocate to the domain (although it may not be the currently allocated
           amount).  VCPUs is the number of virtual CPUs allocated to the domain.  State is the
           run state (see below).  Time is the total run time of the domain as accounted for by
           Xen.

           STATES

           The State field lists 6 states for a Xen domain, and which ones the current domain is
           in.

           r - running
               The domain is currently running on a CPU.

           b - blocked
               The domain is blocked, and not running or runnable.  This can be because the
               domain is waiting on IO (a traditional wait state) or has gone to sleep because
               there was nothing else for it to do.

           p - paused
               The domain has been paused, usually occurring through the administrator running xl
               pause.  When in a paused state the domain will still consume allocated resources
               (like memory), but will not be eligible for scheduling by the Xen hypervisor.

           s - shutdown
               The guest OS has shut down (SCHEDOP_shutdown has been called) but the domain is
               not dying yet.

           c - crashed
               The domain has crashed, which is always a violent ending.  Usually this state only
               occurs if the domain has been configured not to restart on a crash.  See xl.cfg(5)
               for more info.

           d - dying
               The domain is in the process of dying, but hasn't completely shut down or crashed.

           NOTES

               The Time column is deceptive.  Virtual IO (network and block devices) used by the
               domains requires coordination by Domain0, which means that Domain0 is actually
               charged for much of the time that a DomainU is doing IO.  Use of this time value
               to determine relative utilizations by domains is thus very unreliable, as a high
               IO workload may show as less utilized than a high CPU workload.  Consider yourself
               warned.

       mem-set domain-id mem
           Set the target for the domain's balloon driver.

           The default unit is kiB.  Add 't' for TiB, 'g' for GiB, 'm' for MiB, 'k' for kiB, and
           'b' for bytes (e.g., `2048m` for 2048 MiB).

           This must be less than the initial maxmem parameter in the domain's configuration.

           Note that this operation requests the guest operating system's balloon driver to reach
           the target amount of memory.  The guest may fail to reach that amount of memory for
           any number of reasons, including:

           •   The guest doesn't have a balloon driver installed

           •   The guest's balloon driver is buggy

           •   The guest's balloon driver cannot create free guest memory due to guest memory
               pressure

           •   The guest's balloon driver cannot allocate memory from Xen because of hypervisor
               memory pressure

           •   The guest administrator has disabled the balloon driver

           Warning: There is no good way to know in advance how small of a mem-set will make a
           domain unstable and cause it to crash.  Be very careful when using this command on
           running domains.

       mem-max domain-id mem
           Specify the limit Xen will place on the amount of memory a guest may allocate.

           The default unit is kiB.  Add 't' for TiB, 'g' for GiB, 'm' for MiB, 'k' for kiB, and
           'b' for bytes (e.g., `2048m` for 2048 MiB).

           mem can't be set lower than the current memory target for domain-id.  It is allowed to
           be higher than the configured maximum memory size of the domain (maxmem parameter in
           the domain's configuration).

           Setting the maximum memory size above the configured maximum memory size will require
           special guest support (memory hotplug) in order to be usable by the guest.

           The domain will not receive any signal regarding the changed memory limit.

       migrate [OPTIONS] domain-id host
           Migrate a domain to another host machine. By default xl relies on ssh as a transport
           mechanism between the two hosts.

           OPTIONS

           -s sshcommand
               Use <sshcommand> instead of ssh.  String will be passed to sh. If empty, run
               <host> instead of ssh <host> xl migrate-receive [-d -e].

           -e  On the new <host>, do not wait in the background for the death of the domain. See
               the corresponding option of the create subcommand.

           -C config
               Send the specified <config> file instead of the file used on creation of the
               domain.

           --debug
               Display huge (!) amount of debug information during the migration process.

           -p  Leave the domain on the receive side paused after migration.

           -D  Preserve the domain-id in the domain coniguration that is transferred such that it
               will be identical on the destination host, unless that configuration is overridden
               using the -C option. Note that it is not possible to use this option for a
               'localhost' migration.

       remus [OPTIONS] domain-id host
           Enable Remus HA or COLO HA for domain. By default xl relies on ssh as a transport
           mechanism between the two hosts.

           NOTES

               Remus support in xl is still in experimental (proof-of-concept) phase.  Disk
               replication support is limited to DRBD disks.

               COLO support in xl is still in experimental (proof-of-concept) phase. All options
               are subject to change in the future.

           COLO disk configuration looks like:

             disk = ['...,colo,colo-host=xxx,colo-port=xxx,colo-export=xxx,active-disk=xxx,hidden-disk=xxx...']

           The supported options are:

           colo-host   : Secondary host's ip address.
           colo-port   : Secondary host's port, we will run a nbd server on the secondary host,
           and the nbd server will listen on this port.
           colo-export : Nbd server's disk export name of the secondary host.
           active-disk : Secondary's guest write will be buffered to this disk, and it's used by
           the secondary.
           hidden-disk : Primary's modified contents will be buffered in this disk, and it's used
           by the secondary.

           COLO network configuration looks like:

             vif = [ '...,forwarddev=xxx,...']

           The supported options are:

           forwarddev : Forward devices for the primary and the secondary, they are directly
           connected.

           OPTIONS

           -i MS
               Checkpoint domain memory every MS milliseconds (default 200ms).

           -u  Disable memory checkpoint compression.

           -s sshcommand
               Use <sshcommand> instead of ssh.  String will be passed to sh.  If empty, run
               <host> instead of ssh <host> xl migrate-receive -r [-e].

           -e  On the new <host>, do not wait in the background for the death of the domain.  See
               the corresponding option of the create subcommand.

           -N netbufscript
               Use <netbufscript> to setup network buffering instead of the default script
               (/etc/xen/scripts/remus-netbuf-setup).

           -F  Run Remus in unsafe mode. Use this option with caution as failover may not work as
               intended.

           -b  Replicate memory checkpoints to /dev/null (blackhole).  Generally useful for
               debugging. Requires enabling unsafe mode.

           -n  Disable network output buffering. Requires enabling unsafe mode.

           -d  Disable disk replication. Requires enabling unsafe mode.

           -c  Enable COLO HA. This conflicts with -i and -b, and memory checkpoint compression
               must be disabled.

           -p  Use userspace COLO Proxy. This option must be used in conjunction with -c.

       pause domain-id
           Pause a domain.  When in a paused state the domain will still consume allocated
           resources (such as memory), but will not be eligible for scheduling by the Xen
           hypervisor.

       reboot [OPTIONS] domain-id
           Reboot a domain.  This acts just as if the domain had the reboot command run from the
           console.  The command returns as soon as it has executed the reboot action, which may
           be significantly earlier than when the domain actually reboots.

           For HVM domains this requires PV drivers to be installed in your guest OS. If PV
           drivers are not present but you have configured the guest OS to behave appropriately
           you may be able to use the -F option to trigger a reset button press.

           The behavior of what happens to a domain when it reboots is set by the on_reboot
           parameter of the domain configuration file when the domain was created.

           OPTIONS

           -F  If the guest does not support PV reboot control then fallback to sending an ACPI
               power event (equivalent to the reset option to trigger).

               You should ensure that the guest is configured to behave as expected in response
               to this event.

       restore [OPTIONS] [configfile] checkpointfile
           Build a domain from an xl save state file.  See save for more info.

           OPTIONS

           -p  Do not unpause the domain after restoring it.

           -e  Do not wait in the background for the death of the domain on the new host.  See
               the corresponding option of the create subcommand.

           -d  Enable debug messages.

           -V, --vncviewer
               Attach to the domain's VNC server, forking a vncviewer process.

           -A, --vncviewer-autopass
               Pass the VNC password to vncviewer via stdin.

       save [OPTIONS] domain-id checkpointfile [configfile]
           Saves a running domain to a state file so that it can be restored later.  Once saved,
           the domain will no longer be running on the system, unless the -c or -p options are
           used.  xl restore restores from this checkpoint file.  Passing a config file argument
           allows the user to manually select the VM config file used to create the domain.

           -c  Leave the domain running after creating the snapshot.

           -p  Leave the domain paused after creating the snapshot.

           -D  Preserve the domain-id in the domain coniguration that is embedded in the state
               file such that it will be identical when the domain is restored, unless that
               configuration is overridden. (See the restore operation above).

       sharing [domain-id]
           Display the number of shared pages for a specified domain. If no domain is specified
           it displays information about all domains.

       shutdown [OPTIONS] -a|domain-id
           Gracefully shuts down a domain.  This coordinates with the domain OS to perform
           graceful shutdown, so there is no guarantee that it will succeed, and may take a
           variable length of time depending on what services must be shut down in the domain.

           For HVM domains this requires PV drivers to be installed in your guest OS. If PV
           drivers are not present but you have configured the guest OS to behave appropriately
           you may be able to use the -F option to trigger a power button press.

           The command returns immediately after signaling the domain unless the -w flag is used.

           The behavior of what happens to a domain when it reboots is set by the on_shutdown
           parameter of the domain configuration file when the domain was created.

           OPTIONS

           -a, --all
               Shutdown all guest domains.  Often used when doing a complete shutdown of a Xen
               system.

           -w, --wait
               Wait for the domain to complete shutdown before returning.  If given once, the
               wait is for domain shutdown or domain death.  If given multiple times, the wait is
               for domain death only.

           -F  If the guest does not support PV shutdown control then fallback to sending an ACPI
               power event (equivalent to the power option to trigger).

               You should ensure that the guest is configured to behave as expected in response
               to this event.

       sysrq domain-id letter
           Send a <Magic System Request> to the domain, each type of request is represented by a
           different letter.  It can be used to send SysRq requests to Linux guests, see
           sysrq.txt in your Linux Kernel sources for more information.  It requires PV drivers
           to be installed in your guest OS.

       trigger domain-id nmi|reset|init|power|sleep|s3resume [VCPU]
           Send a trigger to a domain, where the trigger can be: nmi, reset, init, power or
           sleep.  Optionally a specific vcpu number can be passed as an argument.  This command
           is only available for HVM domains.

       unpause domain-id
           Moves a domain out of the paused state.  This will allow a previously paused domain to
           now be eligible for scheduling by the Xen hypervisor.

       vcpu-set domain-id vcpu-count
           Enables the vcpu-count virtual CPUs for the domain in question.  Like mem-set, this
           command can only allocate up to the maximum virtual CPU count configured at boot for
           the domain.

           If the vcpu-count is smaller than the current number of active VCPUs, the highest
           number VCPUs will be hotplug removed.  This may be important for pinning purposes.

           Attempting to set the VCPUs to a number larger than the initially configured VCPU
           count is an error.  Trying to set VCPUs to < 1 will be quietly ignored.

           Some guests may need to actually bring the newly added CPU online after vcpu-set, go
           to SEE ALSO section for information.

       vcpu-list [domain-id]
           Lists VCPU information for a specific domain.  If no domain is specified, VCPU
           information for all domains will be provided.

       vcpu-pin [-f|--force] domain-id vcpu cpus hard cpus soft
           Set hard and soft affinity for a vcpu of <domain-id>. Normally VCPUs can float between
           available CPUs whenever Xen deems a different run state is appropriate.

           Hard affinity can be used to restrict this, by ensuring certain VCPUs can only run on
           certain physical CPUs. Soft affinity specifies a preferred set of CPUs. Soft affinity
           needs special support in the scheduler, which is only provided in credit1.

           The keyword all can be used to apply the hard and soft affinity masks to all the VCPUs
           in the domain. The symbol '-' can be used to leave either hard or soft affinity alone.

           For example:

            xl vcpu-pin 0 3 - 6-9

           will set soft affinity for vCPU 3 of domain 0 to pCPUs 6,7,8 and 9, leaving its hard
           affinity untouched. On the other hand:

            xl vcpu-pin 0 3 3,4 6-9

           will set both hard and soft affinity, the former to pCPUs 3 and 4, the latter to pCPUs
           6,7,8, and 9.

           Specifying -f or --force will remove a temporary pinning done by the operating system
           (normally this should be done by the operating system).  In case a temporary pinning
           is active for a vcpu the affinity of this vcpu can't be changed without this option.

       vm-list
           Prints information about guests. This list excludes information about service or
           auxiliary domains such as dom0 and stubdoms.

           EXAMPLE

           An example format for the list is as follows:

               UUID                                  ID    name
               59e1cf6c-6ab9-4879-90e7-adc8d1c63bf5  2    win
               50bc8f75-81d0-4d53-b2e6-95cb44e2682e  3    linux

       vncviewer [OPTIONS] domain-id
           Attach to the domain's VNC server, forking a vncviewer process.

           OPTIONS

           --autopass
               Pass the VNC password to vncviewer via stdin.

XEN HOST SUBCOMMANDS

       debug-keys keys
           Send debug keys to Xen. It is the same as pressing the Xen "conswitch" (Ctrl-A by
           default) three times and then pressing "keys".

       set-parameters params
           Set hypervisor parameters as specified in params. This allows for some boot parameters
           of the hypervisor to be modified in the running systems.

       dmesg [OPTIONS]
           Reads the Xen message buffer, similar to dmesg on a Linux system.  The buffer contains
           informational, warning, and error messages created during Xen's boot process.  If you
           are having problems with Xen, this is one of the first places to look as part of
           problem determination.

           OPTIONS

           -c, --clear
               Clears Xen's message buffer.

       info [OPTIONS]
           Print information about the Xen host in name : value format.  When reporting a Xen
           bug, please provide this information as part of the bug report. See
           https://wiki.xenproject.org/wiki/Reporting_Bugs_against_Xen_Project on how to report
           Xen bugs.

           Sample output looks as follows:

            host                   : scarlett
            release                : 3.1.0-rc4+
            version                : #1001 SMP Wed Oct 19 11:09:54 UTC 2011
            machine                : x86_64
            nr_cpus                : 4
            nr_nodes               : 1
            cores_per_socket       : 4
            threads_per_core       : 1
            cpu_mhz                : 2266
            hw_caps                : bfebfbff:28100800:00000000:00003b40:009ce3bd:00000000:00000001:00000000
            virt_caps              : hvm hvm_directio
            total_memory           : 6141
            free_memory            : 4274
            free_cpus              : 0
            outstanding_claims     : 0
            xen_major              : 4
            xen_minor              : 2
            xen_extra              : -unstable
            xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64
            xen_scheduler          : credit
            xen_pagesize           : 4096
            platform_params        : virt_start=0xffff800000000000
            xen_changeset          : Wed Nov 02 17:09:09 2011 +0000 24066:54a5e994a241
            xen_commandline        : com1=115200,8n1 guest_loglvl=all dom0_mem=750M console=com1
            cc_compiler            : gcc version 4.4.5 (Debian 4.4.5-8)
            cc_compile_by          : sstabellini
            cc_compile_domain      : uk.xensource.com
            cc_compile_date        : Tue Nov  8 12:03:05 UTC 2011
            xend_config_format     : 4

           FIELDS

           Not all fields will be explained here, but some of the less obvious ones deserve
           explanation:

           hw_caps
               A vector showing what hardware capabilities are supported by your processor.  This
               is equivalent to, though more cryptic, the flags field in /proc/cpuinfo on a
               normal Linux machine: they both derive from the feature bits returned by the cpuid
               command on x86 platforms.

           free_memory
               Available memory (in MB) not allocated to Xen, or any other domains, or claimed
               for domains.

           outstanding_claims
               When a claim call is done (see xl.conf(5)) a reservation for a specific amount of
               pages is set and also a global value is incremented. This global value
               (outstanding_claims) is then reduced as the domain's memory is populated and
               eventually reaches zero. Most of the time the value will be zero, but if you are
               launching multiple guests, and claim_mode is enabled, this value can
               increase/decrease. Note that the value also affects the free_memory - as it will
               reflect the free memory in the hypervisor minus the outstanding pages claimed for
               guests.  See xl info claims parameter for detailed listing.

           xen_caps
               The Xen version and architecture.  Architecture values can be one of: x86_32,
               x86_32p (i.e. PAE enabled), x86_64, ia64.

           xen_changeset
               The Xen mercurial changeset id.  Very useful for determining exactly what version
               of code your Xen system was built from.

           OPTIONS

           -n, --numa
               List host NUMA topology information

       top Executes the xentop(1) command, which provides real time monitoring of domains.
           Xentop has a curses interface, and is reasonably self explanatory.

       uptime
           Prints the current uptime of the domains running.

       claims
           Prints information about outstanding claims by the guests. This provides the
           outstanding claims and currently populated memory count for the guests.  These values
           added up reflect the global outstanding claim value, which is provided via the info
           argument, outstanding_claims value.  The Mem column has the cumulative value of
           outstanding claims and the total amount of memory that has been right now allocated to
           the guest.

           EXAMPLE

           An example format for the list is as follows:

            Name                                        ID   Mem VCPUs      State   Time(s)  Claimed
            Domain-0                                     0  2047     4     r-----      19.7     0
            OL5                                          2  2048     1     --p---       0.0   847
            OL6                                          3  1024     4     r-----       5.9     0
            Windows_XP                                   4  2047     1     --p---       0.0  1989

           In which it can be seen that the OL5 guest still has 847MB of claimed memory (out of
           the total 2048MB where 1191MB has been allocated to the guest).

SCHEDULER SUBCOMMANDS

       Xen ships with a number of domain schedulers, which can be set at boot time with the
       sched= parameter on the Xen command line.  By default credit is used for scheduling.

       sched-credit [OPTIONS]
           Set or get credit (aka credit1) scheduler parameters.  The credit scheduler is a
           proportional fair share CPU scheduler built from the ground up to be work conserving
           on SMP hosts.

           Each domain (including Domain0) is assigned a weight and a cap.

           OPTIONS

           -d DOMAIN, --domain=DOMAIN
               Specify domain for which scheduler parameters are to be modified or retrieved.
               Mandatory for modifying scheduler parameters.

           -w WEIGHT, --weight=WEIGHT
               A domain with a weight of 512 will get twice as much CPU as a domain with a weight
               of 256 on a contended host. Legal weights range from 1 to 65535 and the default is
               256.

           -c CAP, --cap=CAP
               The cap optionally fixes the maximum amount of CPU a domain will be able to
               consume, even if the host system has idle CPU cycles. The cap is expressed in
               percentage of one physical CPU: 100 is 1 physical CPU, 50 is half a CPU, 400 is 4
               CPUs, etc. The default, 0, means there is no upper cap.

               NB: Many systems have features that will scale down the computing power of a cpu
               that is not 100% utilized.  This can be in the operating system, but can also
               sometimes be below the operating system in the BIOS.  If you set a cap such that
               individual cores are running at less than 100%, this may have an impact on the
               performance of your workload over and above the impact of the cap. For example, if
               your processor runs at 2GHz, and you cap a vm at 50%, the power management system
               may also reduce the clock speed to 1GHz; the effect will be that your VM gets 25%
               of the available power (50% of 1GHz) rather than 50% (50% of 2GHz).  If you are
               not getting the performance you expect, look at performance and cpufreq options in
               your operating system and your BIOS.

           -p CPUPOOL, --cpupool=CPUPOOL
               Restrict output to domains in the specified cpupool.

           -s, --schedparam
               Specify to list or set pool-wide scheduler parameters.

           -t TSLICE, --tslice_ms=TSLICE
               Timeslice tells the scheduler how long to allow VMs to run before pre-empting.
               The default is 30ms.  Valid ranges are 1ms to 1000ms.  The length of the timeslice
               (in ms) must be higher than the length of the ratelimit (see below).

           -r RLIMIT, --ratelimit_us=RLIMIT
               Ratelimit attempts to limit the number of schedules per second.  It sets a minimum
               amount of time (in microseconds) a VM must run before we will allow a higher-
               priority VM to pre-empt it.  The default value is 1000 microseconds (1ms).  Valid
               range is 100 to 500000 (500ms).  The ratelimit length must be lower than the
               timeslice length.

           -m DELAY, --migration_delay_us=DELAY
               Migration delay specifies for how long a vCPU, after it stopped running should be
               considered "cache-hot". Basically, if less than DELAY us passed since when the
               vCPU was executing on a CPU, it is likely that most of the vCPU's working set is
               still in the CPU's cache, and therefore the vCPU is not migrated.

               Default is 0. Maximum is 100 ms. This can be effective at preventing vCPUs to
               bounce among CPUs too quickly, but, at the same time, the scheduler stops being
               fully work-conserving.

           COMBINATION

           The following is the effect of combining the above options:

           <nothing>             : List all domain params and sched params from all pools
           -d [domid]            : List domain params for domain [domid]
           -d [domid] [params]   : Set domain params for domain [domid]
           -p [pool]             : list all domains and sched params for [pool]
           -s                    : List sched params for poolid 0
           -s [params]           : Set sched params for poolid 0
           -p [pool] -s          : List sched params for [pool]
           -p [pool] -s [params] : Set sched params for [pool]
           -p [pool] -d...       : Illegal
       sched-credit2 [OPTIONS]
           Set or get credit2 scheduler parameters.  The credit2 scheduler is a proportional fair
           share CPU scheduler built from the ground up to be work conserving on SMP hosts.

           Each domain (including Domain0) is assigned a weight.

           OPTIONS

           -d DOMAIN, --domain=DOMAIN
               Specify domain for which scheduler parameters are to be modified or retrieved.
               Mandatory for modifying scheduler parameters.

           -w WEIGHT, --weight=WEIGHT
               A domain with a weight of 512 will get twice as much CPU as a domain with a weight
               of 256 on a contended host. Legal weights range from 1 to 65535 and the default is
               256.

           -p CPUPOOL, --cpupool=CPUPOOL
               Restrict output to domains in the specified cpupool.

           -s, --schedparam
               Specify to list or set pool-wide scheduler parameters.

           -r RLIMIT, --ratelimit_us=RLIMIT
               Attempts to limit the rate of context switching. It is basically the same as
               --ratelimit_us in sched-credit

       sched-rtds [OPTIONS]
           Set or get rtds (Real Time Deferrable Server) scheduler parameters.  This rt scheduler
           applies Preemptive Global Earliest Deadline First real-time scheduling algorithm to
           schedule VCPUs in the system.  Each VCPU has a dedicated period, budget and extratime.
           While scheduled, a VCPU burns its budget.  A VCPU has its budget replenished at the
           beginning of each period; Unused budget is discarded at the end of each period.  A
           VCPU with extratime set gets extra time from the unreserved system resource.

           OPTIONS

           -d DOMAIN, --domain=DOMAIN
               Specify domain for which scheduler parameters are to be modified or retrieved.
               Mandatory for modifying scheduler parameters.

           -v VCPUID/all, --vcpuid=VCPUID/all
               Specify vcpu for which scheduler parameters are to be modified or retrieved.

           -p PERIOD, --period=PERIOD
               Period of time, in microseconds, over which to replenish the budget.

           -b BUDGET, --budget=BUDGET
               Amount of time, in microseconds, that the VCPU will be allowed to run every
               period.

           -e Extratime, --extratime=Extratime
               Binary flag to decide if the VCPU will be allowed to get extra time from the
               unreserved system resource.

           -c CPUPOOL, --cpupool=CPUPOOL
               Restrict output to domains in the specified cpupool.

           EXAMPLE

               1) Use -v all to see the budget and period of all the VCPUs of all the domains:

                   xl sched-rtds -v all
                   Cpupool Pool-0: sched=RTDS
                   Name                        ID VCPU    Period    Budget  Extratime
                   Domain-0                     0    0     10000      4000        yes
                   vm1                          2    0       300       150        yes
                   vm1                          2    1       400       200        yes
                   vm1                          2    2     10000      4000        yes
                   vm1                          2    3      1000       500        yes
                   vm2                          4    0     10000      4000        yes
                   vm2                          4    1     10000      4000        yes

               Without any arguments, it will output the default scheduling parameters for each
               domain:

                   xl sched-rtds
                   Cpupool Pool-0: sched=RTDS
                   Name                        ID    Period    Budget  Extratime
                   Domain-0                     0     10000      4000        yes
                   vm1                          2     10000      4000        yes
                   vm2                          4     10000      4000        yes

               2) Use, for instance, -d vm1, -v all to see the budget and period of all VCPUs of
               a specific domain (vm1):

                   xl sched-rtds -d vm1 -v all
                   Name                        ID VCPU    Period    Budget  Extratime
                   vm1                          2    0       300       150        yes
                   vm1                          2    1       400       200        yes
                   vm1                          2    2     10000      4000        yes
                   vm1                          2    3      1000       500        yes

               To see the parameters of a subset of the VCPUs of a domain, use:

                   xl sched-rtds -d vm1 -v 0 -v 3
                   Name                        ID VCPU    Period    Budget  Extratime
                   vm1                          2    0       300       150        yes
                   vm1                          2    3      1000       500        yes

               If no -v is specified, the default scheduling parameters for the domain are shown:

                   xl sched-rtds -d vm1
                   Name                        ID    Period    Budget  Extratime
                   vm1                          2     10000      4000        yes

               3) Users can set the budget and period of multiple VCPUs of a specific domain with
               only one command, e.g., "xl sched-rtds -d vm1 -v 0 -p 100 -b 50 -e 1 -v 3 -p 300
               -b 150 -e 0".

               To change the parameters of all the VCPUs of a domain, use -v all, e.g., "xl
               sched-rtds -d vm1 -v all -p 500 -b 250 -e 1".

CPUPOOLS COMMANDS

       Xen can group the physical cpus of a server in cpu-pools. Each physical CPU is assigned at
       most to one cpu-pool. Domains are each restricted to a single cpu-pool. Scheduling does
       not cross cpu-pool boundaries, so each cpu-pool has its own scheduler.  Physical cpus and
       domains can be moved from one cpu-pool to another only by an explicit command.  Cpu-pools
       can be specified either by name or by id.

       cpupool-create [OPTIONS] [configfile] [variable=value ...]
           Create a cpu pool based an config from a configfile or command-line parameters.
           Variable settings from the configfile may be altered by specifying new or additional
           assignments on the command line.

           See the xlcpupool.cfg(5) manpage for more information.

           OPTIONS

           -f=FILE, --defconfig=FILE
               Use the given configuration file.

       cpupool-list [OPTIONS] [cpu-pool]
           List CPU pools on the host.

           OPTIONS

           -c, --cpus
               If this option is specified, xl prints a list of CPUs used by cpu-pool.

       cpupool-destroy cpu-pool
           Deactivates a cpu pool.  This is possible only if no domain is active in the cpu-pool.

       cpupool-rename cpu-pool <newname>
           Renames a cpu-pool to newname.

       cpupool-cpu-add cpu-pool cpus|node:nodes
           Adds one or more CPUs or NUMA nodes to cpu-pool. CPUs and NUMA nodes can be specified
           as single CPU/node IDs or as ranges.

           For example:

            (a) xl cpupool-cpu-add mypool 4
            (b) xl cpupool-cpu-add mypool 1,5,10-16,^13
            (c) xl cpupool-cpu-add mypool node:0,nodes:2-3,^10-12,8

           means adding CPU 4 to mypool, in (a); adding CPUs 1,5,10,11,12,14,15 and 16, in (b);
           and adding all the CPUs of NUMA nodes 0, 2 and 3, plus CPU 8, but keeping out CPUs
           10,11,12, in (c).

           All the specified CPUs that can be added to the cpupool will be added to it. If some
           CPU can't (e.g., because they're already part of another cpupool), an error is
           reported about each one of them.

       cpupool-cpu-remove cpu-pool cpus|node:nodes
           Removes one or more CPUs or NUMA nodes from cpu-pool. CPUs and NUMA nodes can be
           specified as single CPU/node IDs or as ranges, using the exact same syntax as in
           cpupool-cpu-add above.

       cpupool-migrate domain-id cpu-pool
           Moves a domain specified by domain-id or domain-name into a cpu-pool.  Domain-0 can't
           be moved to another cpu-pool.

       cpupool-numa-split
           Splits up the machine into one cpu-pool per numa node.

VIRTUAL DEVICE COMMANDS

       Most virtual devices can be added and removed while guests are running, assuming that the
       necessary support exists in the guest OS.  The effect to the guest OS is much the same as
       any hotplug event.

   BLOCK DEVICES
       block-attach domain-id disc-spec-component(s) ...
           Create a new virtual block device and attach it to the specified domain.  A disc
           specification is in the same format used for the disk variable in the domain config
           file. See xl-disk-configuration(5). This will trigger a hotplug event for the guest.

           Note that only PV block devices are supported by block-attach.  Requests to attach
           emulated devices (eg, vdev=hdc) will result in only the PV view being available to the
           guest.

       block-detach [OPTIONS] domain-id devid
           Detach a domain's virtual block device. devid may be the symbolic name or the numeric
           device id given to the device by domain 0.  You will need to run xl block-list to
           determine that number.

           Detaching the device requires the cooperation of the domain.  If the domain fails to
           release the device (perhaps because the domain is hung or is still using the device),
           the detach will fail.

           OPTIONS

           --force
               If this parameter is specified the device will be forcefully detached, which may
               cause IO errors in the domain and possibly a guest crash

       block-list domain-id
           List virtual block devices for a domain.

       cd-insert domain-id virtualdevice target
           Insert a cdrom into a guest domain's existing virtual cd drive. The virtual drive must
           already exist but can be empty. How the device should be presented to the guest domain
           is specified by the virtualdevice parameter; for example "hdc". Parameter target is
           the target path in the backend domain (usually domain 0) to be exported; can be a
           block device or a file etc.  See target in xl-disk-configuration(5).

           Only works with HVM domains.

       cd-eject domain-id virtualdevice
           Eject a cdrom from a guest domain's virtual cd drive, specified by virtualdevice. Only
           works with HVM domains.

   NETWORK DEVICES
       network-attach domain-id network-device
           Creates a new network device in the domain specified by domain-id.  network-device
           describes the device to attach, using the same format as the vif string in the domain
           config file. See xl.cfg(5) and xl-network-configuration(5) for more information.

           Note that only attaching PV network interfaces is supported.

       network-detach domain-id devid|mac
           Removes the network device from the domain specified by domain-id.  devid is the
           virtual interface device number within the domain (i.e. the 3 in vif22.3).
           Alternatively, the mac address can be used to select the virtual interface to detach.

       network-list domain-id
           List virtual network interfaces for a domain.

   CHANNEL DEVICES
       channel-list domain-id
           List virtual channel interfaces for a domain.

   VIRTUAL TRUSTED PLATFORM MODULE (vTPM) DEVICES
       vtpm-attach domain-id vtpm-device
           Creates a new vtpm (virtual Trusted Platform Module) device in the domain specified by
           domain-id. vtpm-device describes the device to attach, using the same format as the
           vtpm string in the domain config file.  See xl.cfg(5) for more information.

       vtpm-detach domain-id devid|uuid
           Removes the vtpm device from the domain specified by domain-id.  devid is the numeric
           device id given to the virtual Trusted Platform Module device. You will need to run xl
           vtpm-list to determine that number. Alternatively, the uuid of the vtpm can be used to
           select the virtual device to detach.

       vtpm-list domain-id
           List virtual Trusted Platform Modules for a domain.

   VDISPL DEVICES
       vdispl-attach domain-id vdispl-device
           Creates a new vdispl device in the domain specified by domain-id.  vdispl-device
           describes the device to attach, using the same format as the vdispl string in the
           domain config file. See xl.cfg(5) for more information.

           NOTES

               As in vdispl-device string semicolon is used then put quotes or escaping when
               using from the shell.

               EXAMPLE

                   xl vdispl-attach DomU connectors='id0:1920x1080;id1:800x600;id2:640x480'

                   or

                   xl vdispl-attach DomU connectors=id0:1920x1080\;id1:800x600\;id2:640x480

       vdispl-detach domain-id dev-id
           Removes the vdispl device specified by dev-id from the domain specified by domain-id.

       vdispl-list domain-id
           List virtual displays for a domain.

   VSND DEVICES
       vsnd-attach domain-id vsnd-item vsnd-item ...
           Creates a new vsnd device in the domain specified by domain-id.  vsnd-item's describe
           the vsnd device to attach, using the same format as the VSND_ITEM_SPEC string in the
           domain config file. See xl.cfg(5) for more information.

           EXAMPLE

               xl vsnd-attach DomU 'CARD, short-name=Main, sample-formats=s16_le;s8;u32_be' 'PCM,
               name=Main' 'STREAM, id=0, type=p' 'STREAM, id=1, type=c, channels-max=2'

       vsnd-detach domain-id dev-id
           Removes the vsnd device specified by dev-id from the domain specified by domain-id.

       vsnd-list domain-id
           List vsnd devices for a domain.

   KEYBOARD DEVICES
       vkb-attach domain-id vkb-device
           Creates a new keyboard device in the domain specified by domain-id.  vkb-device
           describes the device to attach, using the same format as the VKB_SPEC_STRING string in
           the domain config file. See xl.cfg(5) for more information.

       vkb-detach domain-id devid
           Removes the keyboard device from the domain specified by domain-id.  devid is the
           virtual interface device number within the domain

       vkb-list domain-id
           List virtual network interfaces for a domain.

PCI PASS-THROUGH

       pci-assignable-list [-n]
           List all the BDF of assignable PCI devices. See xl-pci-configuration(5) for more
           information. If the -n option is specified then any name supplied when the device was
           made assignable will also be displayed.

           These are devices in the system which are configured to be available for passthrough
           and are bound to a suitable PCI backend driver in domain 0 rather than a real driver.

       pci-assignable-add [-n NAME] BDF
           Make the device at BDF assignable to guests. See xl-pci-configuration(5) for more
           information. If the -n option is supplied then the assignable device entry will the
           named with the given NAME.

           This will bind the device to the pciback driver and assign it to the "quarantine
           domain".  If it is already bound to a driver, it will first be unbound, and the
           original driver stored so that it can be re-bound to the same driver later if desired.
           If the device is already bound, it will assign it to the quarantine domain and return
           success.

           CAUTION: This will make the device unusable by Domain 0 until it is returned with pci-
           assignable-remove.  Care should therefore be taken not to do this on a device critical
           to domain 0's operation, such as storage controllers, network interfaces, or GPUs that
           are currently being used.

       pci-assignable-remove [-r] BDF|NAME
           Make a device non-assignable to guests. The device may be identified either by its BDF
           or the NAME supplied when the device was made assignable. See xl-pci-configuration(5)
           for more information.

           This will at least unbind the device from pciback, and re-assign it from the
           "quarantine domain" back to domain 0.  If the -r option is specified, it will also
           attempt to re-bind the device to its original driver, making it usable by Domain 0
           again.  If the device is not bound to pciback, it will return success.

           Note that this functionality will work even for devices which were not made assignable
           by pci-assignable-add.  This can be used to allow dom0 to access devices which were
           automatically quarantined by Xen after domain destruction as a result of Xen's
           iommu=quarantine command-line default.

           As always, this should only be done if you trust the guest, or are confident that the
           particular device you're re-assigning to dom0 will cancel all in-flight DMA on FLR.

       pci-attach domain-id PCI_SPEC_STRING
           Hot-plug a new pass-through pci device to the specified domain. See
           xl-pci-configuration(5) for more information.

       pci-detach [OPTIONS] domain-id PCI_SPEC_STRING
           Hot-unplug a pci device that was previously passed through to a domain. See
           xl-pci-configuration(5) for more information.

           OPTIONS

           -f  If this parameter is specified, xl is going to forcefully remove the device even
               without guest domain's collaboration.

       pci-list domain-id
           List the BDF of pci devices passed through to a domain.

USB PASS-THROUGH

       usbctrl-attach domain-id usbctrl-device
           Create a new USB controller in the domain specified by domain-id, usbctrl-device
           describes the device to attach, using form "KEY=VALUE KEY=VALUE ..." where KEY=VALUE
           has the same meaning as the usbctrl description in the domain config file.  See
           xl.cfg(5) for more information.

       usbctrl-detach domain-id devid
           Destroy a USB controller from the specified domain.  devid is devid of the USB
           controller.

       usbdev-attach domain-id usbdev-device
           Hot-plug a new pass-through USB device to the domain specified by domain-id, usbdev-
           device describes the device to attach, using form "KEY=VALUE KEY=VALUE ..." where
           KEY=VALUE has the same meaning as the usbdev description in the domain config file.
           See xl.cfg(5) for more information.

       usbdev-detach domain-id controller=devid port=number
           Hot-unplug a previously assigned USB device from a domain.  controller=devid and
           port=number is USB controller:port in the guest domain the USB device is attached to.

       usb-list domain-id
           List pass-through usb devices for a domain.

DEVICE-MODEL CONTROL

       qemu-monitor-command domain-id command
           Issue a monitor command to the device model of the domain specified by domain-id.
           command can be any valid command qemu understands. This can be e.g. used to add non-
           standard devices or devices with non-standard parameters to a domain. The output of
           the command is printed to stdout.

           Warning: This qemu monitor access is provided for convenience when debugging,
           troubleshooting, and experimenting.  Its use is not supported by the Xen Project.

           Specifically, not all information displayed by the qemu monitor will necessarily be
           accurate or complete, because in a Xen system qemu does not have a complete view of
           the guest.

           Furthermore, modifying the guest's setup via the qemu monitor may conflict with the
           Xen toolstack's assumptions.  Resulting problems may include, but are not limited to:
           guest crashes; toolstack error messages; inability to migrate the guest; and security
           vulnerabilities which are not covered by the Xen Project security response policy.

           EXAMPLE

           Obtain information of USB devices connected as such via the device model (only!) to a
           domain:

            xl qemu-monitor-command vm1 'info usb'
             Device 0.2, Port 5, Speed 480 Mb/s, Product Mass Storage

FLASK

       FLASK is a security framework that defines a mandatory access control policy providing
       fine-grained controls over Xen domains, allowing the policy writer to define what
       interactions between domains, devices, and the hypervisor are permitted. Some example of
       what you can do using XSM/FLASK:
        - Prevent two domains from communicating via event channels or grants
        - Control which domains can use device passthrough (and which devices)
        - Restrict or audit operations performed by privileged domains
        - Prevent a privileged domain from arbitrarily mapping pages from other
          domains.

       You can find more details on how to use FLASK and an example security policy here:
       <https://xenbits.xenproject.org/docs/unstable/misc/xsm-flask.txt>

       getenforce
           Determine if the FLASK security module is loaded and enforcing its policy.

       setenforce 1|0|Enforcing|Permissive
           Enable or disable enforcing of the FLASK access controls. The default is permissive,
           but this can be changed to enforcing by specifying "flask=enforcing" or "flask=late"
           on the hypervisor's command line.

       loadpolicy policy-file
           Load FLASK policy from the given policy file. The initial policy is provided to the
           hypervisor as a multiboot module; this command allows runtime updates to the policy.
           Loading new security policy will reset runtime changes to device labels.

PLATFORM SHARED RESOURCE MONITORING/CONTROL

       Intel Haswell and later server platforms offer shared resource monitoring and control
       technologies. The availability of these technologies and the hardware capabilities can be
       shown with psr-hwinfo.

       See <https://xenbits.xenproject.org/docs/unstable/misc/xl-psr.html> for more information.

       psr-hwinfo [OPTIONS]
           Show Platform Shared Resource (PSR) hardware information.

           OPTIONS

           -m, --cmt
               Show Cache Monitoring Technology (CMT) hardware information.

           -a, --cat
               Show Cache Allocation Technology (CAT) hardware information.

   CACHE MONITORING TECHNOLOGY
       Intel Haswell and later server platforms offer monitoring capability in each logical
       processor to measure specific platform shared resource metric, for example, L3 cache
       occupancy. In the Xen implementation, the monitoring granularity is domain level. To
       monitor a specific domain, just attach the domain id with the monitoring service. When the
       domain doesn't need to be monitored any more, detach the domain id from the monitoring
       service.

       Intel Broadwell and later server platforms also offer total/local memory bandwidth
       monitoring. Xen supports per-domain monitoring for these two additional monitoring types.
       Both memory bandwidth monitoring and L3 cache occupancy monitoring share the same set of
       underlying monitoring service. Once a domain is attached to the monitoring service,
       monitoring data can be shown for any of these monitoring types.

       There is no cache monitoring and memory bandwidth monitoring on L2 cache so far.

       psr-cmt-attach domain-id
           attach: Attach the platform shared resource monitoring service to a domain.

       psr-cmt-detach domain-id
           detach: Detach the platform shared resource monitoring service from a domain.

       psr-cmt-show psr-monitor-type [domain-id]
           Show monitoring data for a certain domain or all domains. Current supported monitor
           types are:
            - "cache-occupancy": showing the L3 cache occupancy(KB).
            - "total-mem-bandwidth": showing the total memory bandwidth(KB/s).
            - "local-mem-bandwidth": showing the local memory bandwidth(KB/s).

   CACHE ALLOCATION TECHNOLOGY
       Intel Broadwell and later server platforms offer capabilities to configure and make use of
       the Cache Allocation Technology (CAT) mechanisms, which enable more cache resources (i.e.
       L3/L2 cache) to be made available for high priority applications. In the Xen
       implementation, CAT is used to control cache allocation on VM basis. To enforce cache on a
       specific domain, just set capacity bitmasks (CBM) for the domain.

       Intel Broadwell and later server platforms also offer Code/Data Prioritization (CDP) for
       cache allocations, which support specifying code or data cache for applications. CDP is
       used on a per VM basis in the Xen implementation. To specify code or data CBM for the
       domain, CDP feature must be enabled and CBM type options need to be specified when setting
       CBM, and the type options (code and data) are mutually exclusive. There is no CDP support
       on L2 so far.

       psr-cat-set [OPTIONS] domain-id cbm
           Set cache capacity bitmasks(CBM) for a domain. For how to specify cbm please refer to
           <https://xenbits.xenproject.org/docs/unstable/misc/xl-psr.html>.

           OPTIONS

           -s SOCKET, --socket=SOCKET
               Specify the socket to process, otherwise all sockets are processed.

           -l LEVEL, --level=LEVEL
               Specify the cache level to process, otherwise the last level cache (L3) is
               processed.

           -c, --code
               Set code CBM when CDP is enabled.

           -d, --data
               Set data CBM when CDP is enabled.

       psr-cat-show [OPTIONS] [domain-id]
           Show CAT settings for a certain domain or all domains.

           OPTIONS

           -l LEVEL, --level=LEVEL
               Specify the cache level to process, otherwise the last level cache (L3) is
               processed.

   Memory Bandwidth Allocation
       Intel Skylake and later server platforms offer capabilities to configure and make use of
       the Memory Bandwidth Allocation (MBA) mechanisms, which provides OS/VMMs the ability to
       slow misbehaving apps/VMs by using a credit-based throttling mechanism. In the Xen
       implementation, MBA is used to control memory bandwidth on VM basis. To enforce bandwidth
       on a specific domain, just set throttling value (THRTL) for the domain.

       psr-mba-set [OPTIONS] domain-id thrtl
           Set throttling value (THRTL) for a domain. For how to specify thrtl please refer to
           <https://xenbits.xenproject.org/docs/unstable/misc/xl-psr.html>.

           OPTIONS

           -s SOCKET, --socket=SOCKET
               Specify the socket to process, otherwise all sockets are processed.

       psr-mba-show [domain-id]
           Show MBA settings for a certain domain or all domains. For linear mode, it shows the
           decimal value. For non-linear mode, it shows hexadecimal value.

IGNORED FOR COMPATIBILITY WITH XM

       xl is mostly command-line compatible with the old xm utility used with the old Python
       xend.  For compatibility, the following options are ignored:

       xl migrate --live

ENVIRONMENT VARIABLES

       The following environment variables shall affect the execution of xl:

       LIBXL_BOOTLOADER_RESTRICT
           Attempt to restrict the bootloader after startup, to limit the consequences of
           security vulnerabilities due to parsing guest owned image files.

           See docs/features/qemu-deprivilege.pandoc for more information on how to setup the
           unprivileged users.

           Note that running the bootloader in restricted mode also implies using non-interactive
           mode, and the disk image must be readable by the restricted user.

           Having this variable set is equivalent to enabling the option, even if the value is 0.

       LIBXL_BOOTLOADER_USER
           When using bootloader_restrict, run the bootloader as this user.  If not set the
           default QEMU restrict users will be used.

           NOTE: Each domain MUST have a SEPARATE username.

           See docs/features/qemu-deprivilege.pandoc for more information.

       LIBXL_BOOTLOADER_TIMEOUT
           Timeout in seconds for bootloader execution when running in restricted mode.
           Otherwise the build time default in LIBXL_BOOTLOADER_TIMEOUT will be used.

           If defined the value must be an unsigned integer between 0 and INT_MAX, otherwise
           behavior is undefined.  Setting to 0 disables the timeout.

SEE ALSO

       The following man pages:

       xl.cfg(5), xlcpupool.cfg(5), xentop(1), xl-disk-configuration(5)
       xl-network-configuration(5)

       And the following documents on the xenproject.org website:

       <https://xenbits.xenproject.org/docs/unstable/misc/xsm-flask.txt>
       <https://xenbits.xenproject.org/docs/unstable/misc/xl-psr.html>

       For systems that don't automatically bring the CPU online:

       <https://wiki.xenproject.org/wiki/Paravirt_Linux_CPU_Hotplug>

BUGS

       Send bugs to xen-devel@lists.xenproject.org, see
       https://wiki.xenproject.org/wiki/Reporting_Bugs_against_Xen_Project on how to send bug
       reports.