Provided by: manpages-dev_6.7-2_all bug

NAME

       mremap - remap a virtual memory address

LIBRARY

       Standard C library (libc, -lc)

SYNOPSIS

       #define _GNU_SOURCE         /* See feature_test_macros(7) */
       #include <sys/mman.h>

       void *mremap(void old_address[.old_size], size_t old_size,
                    size_t new_size, int flags, ... /* void *new_address */);

DESCRIPTION

       mremap()  expands  (or  shrinks)  an existing memory mapping, potentially moving it at the
       same time (controlled by the flags argument and the available virtual address space).

       old_address is the old address of the virtual memory block that you  want  to  expand  (or
       shrink).   Note  that old_address has to be page aligned.  old_size is the old size of the
       virtual memory block.  new_size is the requested size of the virtual  memory  block  after
       the resize.  An optional fifth argument, new_address, may be provided; see the description
       of MREMAP_FIXED below.

       If the value of old_size is zero, and old_address refers to a shareable mapping  (see  the
       description of MAP_SHARED in mmap(2)), then mremap() will create a new mapping of the same
       pages.  new_size will be the size of the new mapping and the location of the  new  mapping
       may  be  specified  with new_address; see the description of MREMAP_FIXED below.  If a new
       mapping is requested via this method, then the MREMAP_MAYMOVE flag must also be specified.

       The flags bit-mask argument may be 0, or include the following flags:

       MREMAP_MAYMOVE
              By default, if there is not sufficient space to expand a  mapping  at  its  current
              location,  then  mremap()  fails.   If  this  flag is specified, then the kernel is
              permitted to relocate the mapping to a new virtual address, if necessary.   If  the
              mapping  is  relocated, then absolute pointers into the old mapping location become
              invalid (offsets relative  to  the  starting  address  of  the  mapping  should  be
              employed).

       MREMAP_FIXED (since Linux 2.3.31)
              This  flag serves a similar purpose to the MAP_FIXED flag of mmap(2).  If this flag
              is specified, then mremap() accepts  a  fifth  argument,  void *new_address,  which
              specifies  a page-aligned address to which the mapping must be moved.  Any previous
              mapping at the address range specified by new_address and new_size is unmapped.

              If MREMAP_FIXED is specified, then MREMAP_MAYMOVE must also be specified.

       MREMAP_DONTUNMAP (since Linux 5.7)
              This flag, which must be used in conjunction with MREMAP_MAYMOVE, remaps a  mapping
              to a new address but does not unmap the mapping at old_address.

              The MREMAP_DONTUNMAP flag can be used only with private anonymous mappings (see the
              description of MAP_PRIVATE and MAP_ANONYMOUS in mmap(2)).

              After completion, any access to the range specified  by  old_address  and  old_size
              will  result  in  a page fault.  The page fault will be handled by a userfaultfd(2)
              handler if the address is in a range  previously  registered  with  userfaultfd(2).
              Otherwise, the kernel allocates a zero-filled page to handle the fault.

              The  MREMAP_DONTUNMAP  flag  may be used to atomically move a mapping while leaving
              the source mapped.  See NOTES for some possible applications of MREMAP_DONTUNMAP.

       If the memory segment specified by old_address and old_size is locked (using  mlock(2)  or
       similar), then this lock is maintained when the segment is resized and/or relocated.  As a
       consequence, the amount of memory locked by the process may change.

RETURN VALUE

       On success mremap() returns a pointer to the new virtual memory area.  On error, the value
       MAP_FAILED (that is, (void *) -1) is returned, and errno is set to indicate the error.

ERRORS

       EAGAIN The  caller  tried  to  expand  a  memory  segment that is locked, but this was not
              possible without exceeding the RLIMIT_MEMLOCK resource limit.

       EFAULT Some address in the range old_address to old_address+old_size is an invalid virtual
              memory  address  for  this  process.   You  can also get EFAULT even if there exist
              mappings that cover the whole address space requested, but those  mappings  are  of
              different types.

       EINVAL An invalid argument was given.  Possible causes are:

              •  old_address was not page aligned;

              •  a  value  other  than  MREMAP_MAYMOVE  or  MREMAP_FIXED  or MREMAP_DONTUNMAP was
                 specified in flags;

              •  new_size was zero;

              •  new_size or new_address was invalid;

              •  the new address range specified by new_address and new_size overlapped  the  old
                 address range specified by old_address and old_size;

              •  MREMAP_FIXED   or   MREMAP_DONTUNMAP   was  specified  without  also  specifying
                 MREMAP_MAYMOVE;

              •  MREMAP_DONTUNMAP was specified, but one or more pages in the range specified  by
                 old_address and old_size were not private anonymous;

              •  MREMAP_DONTUNMAP was specified and old_size was not equal to new_size;

              •  old_size was zero and old_address does not refer to a shareable mapping (but see
                 BUGS);

              •  old_size was zero and the MREMAP_MAYMOVE flag was not specified.

       ENOMEM Not enough memory was available to complete the operation.  Possible causes are:

              •  The memory area cannot be expanded at  the  current  virtual  address,  and  the
                 MREMAP_MAYMOVE  flag  is  not  set  in flags.  Or, there is not enough (virtual)
                 memory available.

              •  MREMAP_DONTUNMAP was used causing a new mapping to be created that would  exceed
                 the  (virtual)  memory  available.   Or,  it  would exceed the maximum number of
                 allowed mappings.

STANDARDS

       Linux.

HISTORY

       Prior to glibc 2.4, glibc did not expose the definition of MREMAP_FIXED, and the prototype
       for mremap() did not allow for the new_address argument.

NOTES

       mremap() changes the mapping between virtual addresses and memory pages.  This can be used
       to implement a very efficient realloc(3).

       In Linux, memory is divided into pages.  A process has (one  or)  several  linear  virtual
       memory  segments.   Each  virtual  memory  segment has one or more mappings to real memory
       pages (in the page table).  Each virtual memory segment has  its  own  protection  (access
       rights),  which  may  cause  a  segmentation violation (SIGSEGV) if the memory is accessed
       incorrectly (e.g., writing to a read-only segment).  Accessing virtual memory  outside  of
       the segments will also cause a segmentation violation.

       If  mremap()  is  used  to  move or expand an area locked with mlock(2) or equivalent, the
       mremap() call will make a best effort to populate the new area  but  will  not  fail  with
       ENOMEM if the area cannot be populated.

   MREMAP_DONTUNMAP use cases
       Possible applications for MREMAP_DONTUNMAP include:

       •  Non-cooperative  userfaultfd(2):  an  application  can yank out a virtual address range
          using MREMAP_DONTUNMAP and then employ a userfaultfd(2)  handler  to  handle  the  page
          faults  that  subsequently  occur  as  other  threads in the process touch pages in the
          yanked range.

       •  Garbage collection: MREMAP_DONTUNMAP can be used in conjunction with userfaultfd(2)  to
          implement  garbage  collection  algorithms  (e.g., in a Java virtual machine).  Such an
          implementation can be  cheaper  (and  simpler)  than  conventional  garbage  collection
          techniques that involve marking pages with protection PROT_NONE in conjunction with the
          use of a SIGSEGV handler to catch accesses to those pages.

BUGS

       Before Linux 4.14, if old_size was zero and the mapping referred to by old_address  was  a
       private  mapping  (see  the description of MAP_PRIVATE in mmap(2)), mremap() created a new
       private mapping unrelated to the original  mapping.   This  behavior  was  unintended  and
       probably  unexpected  in  user-space  applications  (since the intention of mremap() is to
       create a new mapping based on the original mapping).  Since  Linux  4.14,  mremap()  fails
       with the error EINVAL in this scenario.

SEE ALSO

       brk(2), getpagesize(2), getrlimit(2), mlock(2), mmap(2), sbrk(2), malloc(3), realloc(3)

       Your  favorite  text book on operating systems for more information on paged memory (e.g.,
       Modern Operating Systems by Andrew S. Tanenbaum, Inside Linux  by  Randolph  Bentson,  The
       Design of the UNIX Operating System by Maurice J. Bach)