Provided by: manpages-dev_6.7-2_all bug

NAME

       readv,  writev,  preadv,  pwritev,  preadv2,  pwritev2  - read or write data into multiple
       buffers

LIBRARY

       Standard C library (libc, -lc)

SYNOPSIS

       #include <sys/uio.h>

       ssize_t readv(int fd, const struct iovec *iov, int iovcnt);
       ssize_t writev(int fd, const struct iovec *iov, int iovcnt);

       ssize_t preadv(int fd, const struct iovec *iov, int iovcnt,
                       off_t offset);
       ssize_t pwritev(int fd, const struct iovec *iov, int iovcnt,
                       off_t offset);

       ssize_t preadv2(int fd, const struct iovec *iov, int iovcnt,
                       off_t offset, int flags);
       ssize_t pwritev2(int fd, const struct iovec *iov, int iovcnt,
                       off_t offset, int flags);

   Feature Test Macro Requirements for glibc (see feature_test_macros(7)):

       preadv(), pwritev():
           Since glibc 2.19:
               _DEFAULT_SOURCE
           glibc 2.19 and earlier:
               _BSD_SOURCE

DESCRIPTION

       The readv() system call reads iovcnt buffers  from  the  file  associated  with  the  file
       descriptor fd into the buffers described by iov ("scatter input").

       The  writev()  system  call  writes  iovcnt  buffers  of data described by iov to the file
       associated with the file descriptor fd ("gather output").

       The pointer iov points to an array of iovec structures, described in iovec(3type).

       The readv() system call works just like read(2) except that multiple buffers are filled.

       The writev() system call works just like write(2) except that multiple buffers are written
       out.

       Buffers  are  processed  in  array order.  This means that readv() completely fills iov[0]
       before proceeding to iov[1], and so on.  (If there is  insufficient  data,  then  not  all
       buffers  pointed  to  by  iov  may  be filled.)  Similarly, writev() writes out the entire
       contents of iov[0] before proceeding to iov[1], and so on.

       The data transfers performed by readv() and writev()  are  atomic:  the  data  written  by
       writev()  is written as a single block that is not intermingled with output from writes in
       other processes; analogously, readv() is guaranteed to read a  contiguous  block  of  data
       from  the file, regardless of read operations performed in other threads or processes that
       have file descriptors referring to the same open file description (see open(2)).

   preadv() and pwritev()
       The preadv() system call combines the functionality of readv() and pread(2).  It  performs
       the  same  task  as  readv(), but adds a fourth argument, offset, which specifies the file
       offset at which the input operation is to be performed.

       The pwritev() system call combines  the  functionality  of  writev()  and  pwrite(2).   It
       performs  the  same  task as writev(), but adds a fourth argument, offset, which specifies
       the file offset at which the output operation is to be performed.

       The file offset is not changed by these system calls.  The file referred to by fd must  be
       capable of seeking.

   preadv2() and pwritev2()
       These  system calls are similar to preadv() and pwritev() calls, but add a fifth argument,
       flags, which modifies the behavior on a per-call basis.

       Unlike preadv() and pwritev(), if the offset argument is -1, then the current file  offset
       is used and updated.

       The flags argument contains a bitwise OR of zero or more of the following flags:

       RWF_DSYNC (since Linux 4.7)
              Provide  a  per-write  equivalent  of  the  O_DSYNC  open(2)  flag.   This  flag is
              meaningful only for pwritev2(), and its effect  applies  only  to  the  data  range
              written by the system call.

       RWF_HIPRI (since Linux 4.6)
              High  priority  read/write.   Allows  block-based filesystems to use polling of the
              device,  which  provides  lower  latency,  but  may   use   additional   resources.
              (Currently,  this  feature  is  usable  only  on a file descriptor opened using the
              O_DIRECT flag.)

       RWF_SYNC (since Linux 4.7)
              Provide a per-write equivalent of the O_SYNC open(2) flag.  This flag is meaningful
              only  for  pwritev2(), and its effect applies only to the data range written by the
              system call.

       RWF_NOWAIT (since Linux 4.14)
              Do not wait for  data  which  is  not  immediately  available.   If  this  flag  is
              specified, the preadv2() system call will return instantly if it would have to read
              data from the backing storage or wait for a lock.  If some  data  was  successfully
              read,  it  will  return  the  number of bytes read.  If no bytes were read, it will
              return -1 and set errno  to  EAGAIN  (but  see  BUGS).   Currently,  this  flag  is
              meaningful only for preadv2().

       RWF_APPEND (since Linux 4.16)
              Provide  a  per-write  equivalent  of  the  O_APPEND  open(2)  flag.   This flag is
              meaningful only for pwritev2(), and its effect  applies  only  to  the  data  range
              written  by  the  system  call.   The  offset  argument  does  not affect the write
              operation; the data is always appended to the end of the  file.   However,  if  the
              offset argument is -1, the current file offset is updated.

RETURN VALUE

       On  success,  readv(),  preadv(), and preadv2() return the number of bytes read; writev(),
       pwritev(), and pwritev2() return the number of bytes written.

       Note that it is not an error for a successful call to transfer fewer bytes than  requested
       (see read(2) and write(2)).

       On error, -1 is returned, and errno is set to indicate the error.

ERRORS

       The  errors  are  as  given  for  read(2) and write(2).  Furthermore, preadv(), preadv2(),
       pwritev(), and pwritev2() can also fail for the same reasons as  lseek(2).   Additionally,
       the following errors are defined:

       EINVAL The sum of the iov_len values overflows an ssize_t value.

       EINVAL The vector count, iovcnt, is less than zero or greater than the permitted maximum.

       EOPNOTSUPP
              An unknown flag is specified in flags.

VERSIONS

   C library/kernel differences
       The raw preadv() and pwritev() system calls have call signatures that differ slightly from
       that of the corresponding GNU C library wrapper functions  shown  in  the  SYNOPSIS.   The
       final  argument,  offset,  is  unpacked by the wrapper functions into two arguments in the
       system calls:

           unsigned long pos_l, unsigned long pos

       These arguments contain, respectively, the low order and high order 32 bits of offset.

STANDARDS

       readv()
       writev()
              POSIX.1-2008.

       preadv()
       pwritev()
              BSD.

       preadv2()
       pwritev2()
              Linux.

HISTORY

       readv()
       writev()
              POSIX.1-2001, 4.4BSD (first appeared in 4.2BSD).

       preadv(), pwritev(): Linux 2.6.30, glibc 2.10.

       preadv2(), pwritev2(): Linux 4.6, glibc 2.26.

   Historical C library/kernel differences
       To deal with the fact that IOV_MAX was so low  on  early  versions  of  Linux,  the  glibc
       wrapper  functions  for readv() and writev() did some extra work if they detected that the
       underlying kernel system call failed because this limit was  exceeded.   In  the  case  of
       readv(),  the  wrapper  function  allocated a temporary buffer large enough for all of the
       items specified by iov, passed that buffer in a call to  read(2),  copied  data  from  the
       buffer  to the locations specified by the iov_base fields of the elements of iov, and then
       freed the buffer.  The wrapper function for writev() performed the analogous task using  a
       temporary buffer and a call to write(2).

       The need for this extra effort in the glibc wrapper functions went away with Linux 2.2 and
       later.  However, glibc continued to provide this behavior until glibc 2.10.  Starting with
       glibc  2.9,  the  wrapper functions provide this behavior only if the library detects that
       the system is running a Linux kernel older than  Linux  2.6.18  (an  arbitrarily  selected
       kernel  version).   And  since  glibc 2.20 (which requires a minimum of Linux 2.6.32), the
       glibc wrapper functions always just directly invoke the system calls.

NOTES

       POSIX.1 allows an implementation to place a limit on the  number  of  items  that  can  be
       passed  in  iov.   An  implementation  can  advertise  its  limit  by  defining IOV_MAX in
       <limits.h> or at run time via the return value from sysconf(_SC_IOV_MAX).  On modern Linux
       systems, the limit is 1024.  Back in Linux 2.0 days, this limit was 16.

BUGS

       Linux  5.9 and Linux 5.10 have a bug where preadv2() with the RWF_NOWAIT flag may return 0
       even when not at end of file.

EXAMPLES

       The following code sample demonstrates the use of writev():

           char          *str0 = "hello ";
           char          *str1 = "world\n";
           ssize_t       nwritten;
           struct iovec  iov[2];

           iov[0].iov_base = str0;
           iov[0].iov_len = strlen(str0);
           iov[1].iov_base = str1;
           iov[1].iov_len = strlen(str1);

           nwritten = writev(STDOUT_FILENO, iov, 2);

SEE ALSO

       pread(2), read(2), write(2)