Provided by: libapp-rad-perl_1.05-4_all bug

NAME

       App::Rad - Rapid (and easy!) creation of command line applications

VERSION

       Version 1.04

SYNOPSIS

       This is your smallest working application (let's call it myapp.pl)

           use App::Rad;
           App::Rad->run();

       That's it, your program already works and you can use it directly via the command line
       (try it!)

           [user@host]$ ./myapp.pl
           Usage: myapp.pl command [arguments]

           Available Commands:
               help    show syntax and available commands

       Next, start creating your own functions (e.g.) inside myapp.pl:

           sub hello {
               return "Hello, World!";
           }

       And now your simple command line program myapp.pl has a 'hello' command!

           [user@host]$ ./myapp.pl
           Usage: myapp.pl command [arguments]

           Available Commands:
               hello
               help    show syntax and available commands

          [user@host]$ ./myapp.pl hello
          Hello, World!

       You could easily add a customized help message for your command through the 'Help()'
       attribute:

           sub hello
           :Help(give a nice compliment)
           {
               return "Hello, World!";
           }

       And then, as expected:

           [user@host]$ ./myapp.pl
           Usage: myapp.pl command [arguments]

           Available Commands:
               hello   give a nice compliment
               help    show syntax and available commands

       App::Rad also lets you expand your applications, providing a lot of flexibility for every
       command, with embedded help, argument and options parsing, configuration file, default
       behavior, and much more:

           use App::Rad;
           App::Rad->run();

           sub setup {
               my $c = shift;

               $c->register_commands( {
                       foo => 'expand your foo!',
                       bar => 'have a drink! arguments: --drink=DRINK',
                   });
           }

           sub foo {
               my $c = shift;
               $c->load_config('myapp.conf');

               return 'foo expanded to ' . baz() * $c->config->{'myfoo'};
           }

           # note that 'baz' was not registered as a command,
           # so it can't be called from the outside.
           sub baz { rand(10) }

           sub bar {
               my $c = shift;
               if ( $c->options->{'drink'} ) {
                   return 'you asked for a ' . $c->options->{'drink'};
               }
               else {
                   return 'you need to ask for a drink';
               }
           }

       You can try on the command line:

          [user@host]$ ./myapp.pl
           Usage: myapp.pl command [arguments]

           Available Commands:
               bar     have a drink! arguments: --drink=DRINK
               foo     expand your foo!
               help    show syntax and available commands

          [user@host]$ ./myapp.pl bar --drink=martini
           you asked for a martini

WARNING

       This module is very young, likely to change in strange ways and to have some bugs (please
       report if you find any!). I will try to keep the API stable, but even that is subject to
       change (let me know if you find anything annoying or have a wishlist). You have been
       warned!

DESCRIPTION

       App::Rad aims to be a simple yet powerful framework for developing your command-line
       applications. It can easily transform your Perl one-liners into reusable subroutines than
       can be called directly by the user of your program.

       It also tries to provide a handy interface for your common command-line tasks. If you have
       a feature request to easen out your tasks even more, please drop me an email or a RT
       feature request.

   Extending App::Rad - Plugins!
       App::Rad plugins can be loaded by naming them as arguments to the "use App::Rad"
       statement. Just ommit the "App::Rad::Plugin" prefix from the plugin name. For example:

          use App::Rad  qw(My::Module);

       will load the "App::Rad::Plugin::My::Module" plugin for you!

       Developers are strongly encouraged to publish their App::Rad plugins under the
       "App::Rad::Plugin" namespace. But, if your plugin start with a name other than that, you
       can fully qualify the name by using an unary plus sign:

         use App::Rad  qw(
                 My::Module
                 +Fully::Qualified::Plugin::Name
         );

       Note that plugins are loaded in the order in which they appear.

       Please refer to the actual plugin documentation for specific usage. And check out
       App::Rad::Plugin if you want to create your own plugins.

INSTANTIATION

       These are the main execution calls for the application. In your App::Rad programs, the
       *ONLY* thing your script needs to actually (and actively) call is one of the instantiation
       (or dispatcher) methods. Leave all the rest to your subs. Currently, the only available
       dispatcher is run():

   run()
       You'll be able to access all of your program's commands directly through the command line,
       as shown in the synopsis.

BUILT-IN COMMANDS

       This module comes with the following default commands. You are free to override them as
       you see fit.

   help
       Shows help information for your program. This built-in function displays the program name
       and all available commands (including the ones you added yourself) if a user types the
       'help' command, or no command at all, or any command that does not exist (as they'd fall
       into the 'default' control function which (by default) calls 'help').

       You can also display specific embedded help for your commands, either explicitly
       registering them with "$c->register()" or "$c->register_commands()" inside "$c->setup()"
       (see respective sections below) or with the Help() attribute:

           use App::Rad;
           App::Rad->run();

           sub mycmd
           :Help(display a nice welcome message)
           {
               return "Welcome!";
           }

       the associated help text would go like this:

           [user@host]$ ./myapp.pl
           Usage: myapp.pl command [arguments]

           Available Commands:
               help    show syntax and available commands
               mycmd   display a nice welcome message

OTHER BUILT IN COMMANDS (OPT-IN)

       The 'include' and 'exclude' commands below let the user include and exclude commands to
       your program and, as this might be dangerous when the user is not yourself, you have to
       opt-in on them:

          use App::Rad qw(include);  # add the 'include' command
          use App::Rad qw(exclude);  # add the 'exclude' command

       though you'll probably want to set them both:

          use App::Rad qw(include exclude);

   include [command_name] -perl_params 'your subroutine code'
       Includes the given subroutine into your program on-the-fly, just as you would writing it
       directly into your program.

       Let's say you have your simple 'myapp.pl' program that uses App::Rad sitting on your
       system quietly. One day, perhaps during your sysadmin's tasks, you create a really amazing
       one-liner to solve a really hairy problem, and want to keep it for posterity (reusability
       is always a good thing!).

       For instance, to change a CSV file in place, adding a column on position #2 containing the
       line number, you might do something like this (this is merely illustrative, it's not
       actually the best way to do it):

           $ perl -i -paF, -le 'splice @F,1,0,$.; $_=join ",",@F' somesheet.csv

       And you just found out that you might use this other times. What do you do? App::Rad to
       the rescue!

       In the one-liner above, just switch 'perl' to 'myapp.pl include SUBNAME' and remove the
       trailing parameters (somesheet.csv):

           $ myapp.pl include addcsvcol -i -paF, -le 'splice @F,1,0,$.; $_=join ",",@F'

       That's it! Now myapp.pl has the 'addcsvcol' command (granted, not the best name) and you
       can call it directly whenever you want:

           $ myapp.pl addcsvcol somesheet.csv

       App::Rad not only transforms and adjusts your one-liner so it can be used inside your
       program, but also automatically formats it with Perl::Tidy (if you have it). This is what
       the one-liner above would look like inside your program:

           sub addcsvcol {
               my $c = shift;

               local ($^I) = "";
               local ($/)  = "\n";
               local ($\)  = "\n";
             LINE: while ( defined( $_ = <ARGV> ) ) {
                   chomp $_;
                   our (@F) = split( /,/, $_, 0 );
                   splice @F, 1, 0, $.;
                   $_ = join( ',', @F );
               }
               continue {
                   die "-p destination: $!\n" unless print $_;
               }
           }

       With so many arguments (-i, -p, -a -F,, -l -e), this is about as bad as it gets. And still
       one might find this way easier to document and mantain than a crude one-liner stored in
       your ~/.bash_history or similar.

       Note: If you don't supply a name for your command, App::Rad will make one up for you
       (cmd1, cmd2, ...). But don't do that, as you'll have a hard time figuring out what that
       specific command does.

       Another Note: App::Rad tries to adjust the command to its interface, but please keep in
       mind this module is still in its early stages so it's not guaranteed to work every time.
       *PLEASE* let me know via email or RT bug request if your one-liner was not correctly
       translated into an App::Rad command. Thanks!

   exclude command_name
       Removes the requested function from your program. Note that this will delete the actual
       code from your program, so be *extra* careful. It is strongly recommended that you do not
       use this command and either remove the subroutine yourself or add the function to your
       excluded list inside setup().

       Note that built-in commands such as 'help' cannot be removed via exclude. They have to be
       added to your excluded list inside setup().

ROLLING YOUR OWN COMMANDS

       Creating a new command is as easy as writing any sub inside your program. Some names
       ("setup", "default", "invalid", "pre_process", "post_process" and "teardown") are reserved
       for special purposes (see the Control Functions section of this document). App::Rad
       provides a nice interface for reading command line input and writing formatted output:

   The Controller
       Every command (sub) you create receives the controller object "$c" (sometimes referred as
       "$self" in other projects) as an argument. The controller is the main interface to
       App::Rad and has several methods to easen your command manipulation and execution tasks.

   Reading arguments
       When someone types in a command, she may pass some arguments to it. Those arguments can be
       accessed in four different ways, depending on what you want. This way it's up to you to
       control which and how many arguments (if at all) you want to receive and/or use. They are:

       @ARGV

       Perl's @ARGV array has all the arguments passed to your command, without the command name
       (use "$c->cmd" for this) and without any processing (even if you explicitly use
       "$c->getopt", which will change $c->argv instead, see below). Since the command itself
       won't be in the @ARGV parameters, you can use it in each command as if they were stand-
       alone programs.

       $c->options

       App::Rad lets you automatically retrieve any POSIX syntax command line options (getopt-
       style) passed to your command via the $c->options method. This method returns a hash
       reference with keys as given parameters and values as... well... values. The 'options'
       method automatically supports two simple argument structures:

       Extended (long) option. Translates "--parameter or --parameter=value" into
       "$c->options->{parameter}". If no value is supplied, it will be set to 1.

       Single-letter option. Translates "-p" into "$c->options->{p}".

       Single-letter options can be nested together, so "-abc" will be parsed into
       "$c->options->{a}", "$c->options->{b}" and "$c->options{c}", while "--abc" will be parsed
       into "$c->options->{abc}". We could, for instance, create a dice-rolling command like
       this:

           sub roll {
               my $c = shift;

               my $value = 0;
               for ( 1..$c->options->{'times'} ) {
                   $value += ( int(rand ($c->options->{'faces'}) + 1));
               }
               return $value;
           }

       And now you can call your 'roll' command like:

           [user@host]$ ./myapp.pl roll --faces=6 --times=2

       Note that App::Rad does not control which arguments can or cannot be passed: they are all
       parsed into "$c->options" and it's up to you to use whichever you want. For a more
       advanced use and control, see the "$c->getopt" method below.

       Also note that single-letter options will be set to 1. However, if a user types them more
       than once, the value will be incremented accordingly. For example, if a user calls your
       program like so:

          [user@host]$ ./myapp.pl some_command -vvv

       or

          [user@host]$ ./myapp.pl some_command -v -v -v

       then, in both cases, "$c->options->{v}" will be set to 3. This will let you easily keep
       track of how many times any given option was chosen, and still let you just check for
       definedness if you don't care about that.

       $c->argv

       The array reference "$c->argv" contains every argument passed to your command that have
       not been parsed into "$c->options". This is usually a list of every provided argument that
       didn't start with a dash (-), unless you've called "$c->getopt" and used something like
       'param=s' (again, see below).

       $c->getopt (Advanced Getopt usage)

       App::Rad is also smoothly integrated with Getopt::Long, so you can have even more
       flexibility and power while parsing your command's arguments, such as aliases and types.
       Call the "$c->getopt()" method anytime inside your commands (or just once in your
       "pre_process" function to always have the same interface) passing a simple array with your
       options, and refer back to $c->options to see them. For instance:

           sub roll {
               my $c = shift;

               $c->getopt( 'faces|f=i', 'times|t=i' )
                   or $c->execute('usage') and return undef;

               # and now you have $c->options->{'faces'}
               # and $c->options->{'times'} just like above.
           }

       This becomes very handy for complex or feature-rich commands. Please refer to the
       Getopt::Long module for more usage examples.

       So, in order to manipulate and use any arguments, remember:

       •     The given command name does not appear in the argument list;

       •     All given arguments are in @ARGV

       •     Automatically processed arguments are in "$c->options"

       •     Non-processed arguments (the ones "$c->options" didn't catch) are in $c->argv

       •     You can use "$c->getopt" to have "Getopt::Long" parse your arguments (it will not
             change @ARGV)

   Sharing Data: "$c->stash"
       The "stash" is a universal hash for storing data among your Commands:

           $c->stash->{foo} = 'bar';
           $c->stash->{herculoids} = [ qw(igoo tundro zok gloop gleep) ];
           $c->stash->{application} = { name => 'My Application' };

       You can use it for more granularity and control over your program. For instance, you can
       email the output of a command if (and only if) something happened:

           sub command {
               my $c = shift;
               my $ret = do_something();

               if ( $ret =~ /critical error/ ) {
                   $c->stash->{mail} = 1;
               }
               return $ret;
           }

           sub post_process {
               my $c = shift;

               if ( $c->stash->{mail} ) {
                   # send email alert...
               }
               else {
                   print $c->output . "\n";
               }
           }

   Returning output
       Once you're through, return whatever you want to give as output for your command:

           my $ret = "Here's the list: ";
           $ret .= join ', ', 1..5;
           return $ret;

           # this prints "Here's the list: 1, 2, 3, 4, 5"

       App::Rad lets you post-process the returned value of every command, so refrain from
       printing to STDOUT directly whenever possible as it will give much more power to your
       programs. See the post_process() control function further below in this document.

HELPER METHODS

       App::Rad's controller comes with several methods to help you manage your application
       easily. If you can think of any other useful command that is not here, please drop me a
       line or RT request.

   $c->execute( COMMAND_NAME )
       Runs the given command. If no command is given, runs the one stored in "$c->cmd". If the
       command does not exist, the 'default' command is ran instead. Each execute() call also
       invokes pre_process and post_process, so you can easily manipulate income and outcome of
       every command.

   $c->cmd
       Returns a string containing the name of the command (that is, the first argument of your
       program), that will be called right after pre_process.

       $c->command

       Alias for "$c->cmd". This longer form is discouraged and may be removed in future
       versions, as one may confuse it with the "$c->commands()" method, explained below. You
       have been warned.

   $c->commands()
       Returns a list of available commands (functions) inside your program

   $c->is_command ( COMMAND_NAME )
       Returns 1 (true) if the given COMMAND_NAME is available, 0 (false) otherwise.

   $c->create_command_name()
       Returns a valid name for a command (i.e. a name slot that's not been used by your
       program). This goes in the form of 'cmd1', 'cmd2', etc., so don't use unless you
       absolutely have to. App::Rad, for instance, uses this whenever you try to include (see
       below) a new command but do not supply a name for it.

   $c->load_config( FILE (FILE2, FILE3, ...) )
       This method lets you easily load into your program one or more configuration files written
       like this:

           # comments and blank lines are discarded
           key1 value1
           key2:value2
           key3=value3
           key5           # stand-alone attribute (and inline-comment)

   $c->config
       Returns a hash reference with any loaded config values (see "$c->load_config()" above).

   $c->register ( NAME, CODEREF [, INLINE_HELP ])
       Registers a coderef as a callable command. Note that you don't have to call this in order
       to register a sub inside your program as a command, run() will already do this for you -
       and if you don't want some subroutines to be issued as commands you can always use
       "$c->register_commands()" (note the plural) inside setup(). This is just an interface to
       dinamically include commands in your programs. The function returns the command name in
       case of success, undef otherwise.

       It is also very useful for creating aliases for your commands:

           sub setup {
               my $c = shift;
               $c->register_commands();

               $c->register('myalias', \&command);
           }

           sub command { return "Hi!" }

       and, on the command line:

           [user@host]$ ./myapp.pl command
           Hi!

           [user@host]@ ./myapp.pl myalias
           Hi!

       The last parameter is optional and lets you add inline help to your command:

           $c->register('cmd_name', \&cmd_func, 'display secret of life');

       $c->register_command ( NAME, CODEREF [, INLINE_HELP ] )

       Longer alias for "$c->register()". It's use is disencouraged as one may confuse it with
       "register_commands" (note the plural) below. Plus you type more :) As such, this method
       may be removed in future versions. You have been warned!

   $c->register_commands()
       This method, usually called during setup(), tells App::Rad to register subroutines as
       valid commands. If called without any parameters, it will register all subroutines in your
       main program as valid commands (note that the default behavior of App::Rad is to ignore
       subroutines starting with an underscore '_'). You can easily change this behavior using
       some of the options below:

       Adding single commands

           $c->register_commands( qw/foo bar baz/ );

       The code above will register only the subs "foo", "bar" and "baz" as commands. Other
       subroutines will not be valid commands, so they can be used as internal subs for your
       program. You can change this behavior with the bundled options - see 'Adding several
       commands' and 'Putting it all together' below.

       Adding single commands (with inline help)

           $c->register_commands(
                   {
                       dos2unix => 'convert text files from DOS to Unix format',
                       unix2dos => 'convert text files from Unix to DOS format',
                   }
           );

       You can pass a hash reference containing commands as keys and a small help string as their
       values. The code above will register only the subs "dos2unix" and "unix2dos", and the
       default help for your program will become something like this:

           [user@host]$ ./myapp.pl
           Usage: myapp.pl command [arguments]

           Available Commands:
               dos2unix    convert text files from DOS to Unix format
               help        show syntax and available commands
               unix2dos    convert text files from Unix to DOS format

       Adding several commands

       You can pass a hash reference as an argument, letting you choose which subroutines to add
       as commands. The following keys may be used (note the dash preceding each key):

       •   "-ignore_prefix": subroutine names starting with the given string won't be added as
           commands

       •   "-ignore_suffix": subroutine names ending with the given string won't be added as
           commands

       •   "-ignore_regexp": subroutine names matching the given regular expression (as a string)
           won't be added as commands

       For example:

           use App::Rad;
           App::Rad->run();

           sub setup {
               my $c = shift;
               $c->register_commands( { -ignore_prefix => '_' } );
           }

           sub foo  {}  # will become a command
           sub bar  {}  # will become a command
           sub _baz {}  # will *NOT* become a command

       This way you can easily segregate between commands and helper functions, making your code
       even more reusable without jeopardizing the command line interface (As of version 1.04,
       ignoring commands with underscore '_' prefixes is also the default App::Rad behavior).

       Putting it all together

       You can combine some of the options above to have even more flexibility:

           $c->register_commands(
                   'foo',
                   { -ignore_suffix => 'foo' },
                   { bar => 'all your command line are belong to us' },
           );

       The code above will register as commands all subs with names not ending in 'foo', but it
       will register the 'foo' sub as well. It will also give the 'bar' command the help string.
       This behavior is handy for registering several commands and having a few exceptions, or to
       add your commands and only have inline help for a few of them (as you see fit).

       You don't have to worry about the order of your elements passed, App::Rad will figure them
       out for you in a DWIM fashion.

           # this does the same as the code above
           $c->register_commands(
                   { bar => 'all your command line are belong to us' },
                   'foo',
                   { -ignore_suffix => 'foo' },
           );

       You can even bundle the hash reference to include your "cmd => help" and special keys:

           # this behaves the same way as the code above:
           $c->register_commands(
               'foo',
               {
                   -ignore_suffix => 'foo',
                   bar => 'all your command line are belong to us',
               }
           );

   $c->unregister_command ( NAME )
       Longer alias for "$c->unregister()". The use of the shorter form is encouraged, and this
       alias may be removed in future versions. You have been warned.

       $c->unregister ( NAME )

       Unregisters a given command name so it's not available anymore. Note that the subroutine
       will still be there to be called from inside your program - it just won't be accessible
       via command line anymore.

   $c->debug( MESSAGE )
       Will print the given message on screen only if the debug flag is enabled:

           use App::Rad  qw( debug );

       Note that, if debug is enabled, App::Rad itself will print several debug messages stating
       its current flow, so you can easily find out where everything is happening.

   $c->plugins()
       Returns a list of all loaded plugins, in the order in which they were loaded.

   $c->load_plugin( PLUGIN NAME )
       This method will dinamically load the given plugin. The plugin needs to be under the
       "App::Rad::Plugin" namespace, and the name should be relative to this path (i.e.
       $c->load_plugin('MyPlugin') will try to load 'App::Rad::Plugin::MyPlugin'). If you want to
       load a plugin by its fully qualified name, you need to prepend a plus sign to the name
       ('+Fully::Qualified::Plugin::Name'). This is an internal method and you really should
       refrain from using it. Instead, plugins should be loaded as parameters to the "use
       App::Rad" statement, as explained above.

CONTROL FUNCTIONS (to possibly override)

       App::Rad implements some control functions which are expected to be overridden by
       implementing them in your program. They are as follows:

   setup()
       This function is responsible for setting up what your program can and cannot do, plus
       everything you need to set before actually running any command (connecting to a database
       or host, check and validate things, download a document, whatever). Note that, if you
       override setup(), you *must* call "$c->register_commands()" or at least "$c->register()"
       so your subs are classified as valid commands (check $c->register_commands() above for
       more information).

       Another interesting thing you can do with setup is to manipulate the command list. For
       instance, you may want to be able to use the "include" and "exclude" commands, but not let
       them available for all users. So instead of writing:

           use App::Rad qw(include exclude);
           App::Rad->run();

       you can write something like this:

           use App::Rad;
           App::Rad->run();

           sub setup {
               my $c = shift;
               $c->register_commands();

               # EUID is 'root'
               if ( $> == 0 ) {
                   $c->register('include', \&App::Rad::include);
                   $c->register('exclude', \&App::Rad::exclude);
               }
           }

       to get something like this:

           [user@host]$ myapp.pl help
           Usage: myapp.pl command [arguments]

           Available Commands:
              help

           [user@host]$ sudo myapp.pl help
           Usage: myapp.pl command [arguments]

           Available Commands:
              exclude
              help
              include

   default()
       If no command is given to your application, it will fall in here. Please note that invalid
       (non-existant) command will fall here too, but you can change this behavior with the
       invalid() function below (although usually you don't want to).

       Default's default (grin) is just an alias for the help command.

           sub default {
               my $c = shift;

               # will fall here if the given
               # command isn't valid.
           }

       You are free (and encouraged) to change the default behavior to whatever you want. This is
       rather useful for when your program will only do one thing, and as such it receives only
       parameters instead of command names. In those cases, use the ""default()"" sub as your
       main program's sub and parse the parameters with "$c->argv" and "$c->getopt" as you would
       in any other command.

   invalid()
       This is a special function to provide even more flexibility while creating your command
       line applications. This is called when the user requests a command that does not exist.
       The built-in "invalid()" will simply redirect itself to "default()" (see above), so
       usually you just have to worry about this when you want to differentiate between "no
       command given" (with or without getopt-like arguments) and "invalid command given" (with
       or without getopt-like arguments).

   teardown()
       If implemented, this function is called automatically after your application runs. It can
       be used to clean up after your operations, removing temporary files, disconnecting a
       database connection established in the setup function, logging, sending data over a
       network, or even storing state information via Storable or whatever.

   pre_process()
       If implemented, this function is called automatically right before the actual wanted
       command is called. This way you have an optional pre-run hook, which permits functionality
       to be added, such as preventing some commands to be run from a specific uid (e.g. root):

           sub pre_process {
               my $c = shift;

               if ( $c->cmd eq 'some_command' and $> != 0 ) {
                   $c->cmd = 'default'; # or some standard error message
               }
           }

   post_process()
       If implemented, this function is called automatically right after the requested function
       returned. It receives the Controller object right after a given command has been executed
       (and hopefully with some output returned), so you can manipulate it at will. In fact, the
       default "post_process" function is as goes:

           sub post_process {
               my $c = shift;

               if ( $c->output() ) {
                   print $c->output() . "\n";
               }
           }

       You can override this function to include a default header/footer for your programs
       (either a label or perhaps a "Content-type: " string), parse the output in any ways you
       see fit (CPAN is your friend, as usual), etc.

IMPORTANT NOTE ON PRINTING INSIDE YOUR COMMANDS

       The post_process() function above is why your application should *NEVER* print to STDOUT.
       Using print (or say, in 5.10) to send output to STDOUT is exclusively the domain of the
       post_process() function. Breaking this rule is a common source of errors. If you want your
       functions to be interactive (for instance) and print everything themselves, you should
       disable post-processing in setup(), or create an empty post_process function or make your
       functions return undef (so post_process() will only add a blank line to the output).

DIAGNOSTICS

       If you see a '1' printed on the screen after a command is issued, it's probably because
       that command is returning a "true" value instead of an output string. If you don't want to
       return the command output for post processing(you'll loose some nice features, though) you
       can return undef or make post_process() empty.

CONFIGURATION AND ENVIRONMENT

       App::Rad requires no configuration files or environment variables.

DEPENDENCIES

       App::Rad depends only on 5.8 core modules (Carp for errors, Getopt::Long for "$c->getopt",
       Attribute::Handlers for "help" and O/B::Deparse for the "include" command).

       If you have Perl::Tidy installed, the "include" command will tidy up your code before
       inclusion.

       The test suite depends on Test::More, FindBin and File::Temp, also core modules.

INCOMPATIBILITIES

       None reported.

BUGS AND LIMITATIONS

       Please report any bugs or feature requests to "bug-app-easy at rt.cpan.org", or through
       the web interface at <http://rt.cpan.org/garu/ReportBug.html?Queue=App-Rad>.  I will be
       notified, and then you'll automatically be notified of progress on your bug as I make
       changes.

SUPPORT

       You can find documentation for this module with the perldoc command.

           perldoc App::Rad

       Although this Module comes without any warraties whatsoever (see DISCLAIMER below), I try
       really hard to provide some quality assurance for the users. This means I not only try to
       close all reported bugs in the minimum amount of time but I also try to find some on my
       own.

       This version of App::Rad comes with 183 tests and I keep my eye constantly on CPAN Testers
       <http://www.cpantesters.org/show/App-Rad.html> to ensure it passes all of them, in all
       platforms. You can send me your own App::Rad tests if you feel I'm missing something and
       I'll hapilly add them to the distribution.

       Since I take user's feedback very seriously, I really hope you send me any wishlist/TODO
       you'd like App::Rad to have (please try to send them via RT so other people can give their
       own suggestions).

       You can also look for information at:

       •   RT: CPAN's request tracker

           <http://rt.cpan.org/garu/Bugs.html?Dist=App-Rad>

       •   AnnoCPAN: Annotated CPAN documentation

           <http://annocpan.org/dist/App-Rad>

       •   CPAN Ratings

           <http://cpanratings.perl.org/d/App-Rad>

       •   Search CPAN

           <http://search.cpan.org/dist/App-Rad>

   IRC
          #app-rad  on irc.perl.org

TODO

       This is a small list of features I plan to add in the near future (in no particular
       order). Feel free to contribute with your wishlist and comentaries!

       •   Shell-like environment

       •   Loadable commands (in an external container file)

       •   Modularized commands (similar to App::Cmd::Commands ?)

       •   app-starter

       •   command inclusion by prefix, suffix and regexp (feature request by fco)

       •   command inclusion and exclusion also by attributes

       •   some extra integration, maybe IPC::Cmd and IO::Prompt

AUTHOR

       Breno G. de Oliveira, "<garu at cpan.org>"

CONTRIBUTORS

       (in alphabetical order)

       Ben Hengst

       Fernando Correa

       Flavio Glock

       Thanks to everyone for contributing! Please let me know if I've skipped your name by
       accident.

ACKNOWLEDGEMENTS

       This module was inspired by Kenichi Ishigaki's presentation "Web is not the only one that
       requires frameworks" during YAPC::Asia::2008 and the modules it exposed (mainly App::Cmd
       and App::CLI).

       Also, many thanks to CGI::App(now Titanium)'s Mark Stosberg and all the Catalyst
       developers, as some of App::Rad's functionality was taken from those (web) frameworks.

LICENSE AND COPYRIGHT

       Copyright 2008 Breno G. de Oliveira "<garu at cpan.org>". All rights reserved.

       This module is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself. See perlartistic.

DISCLAIMER OF WARRANTY

       BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE,
       TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE
       COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF
       ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
       WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO
       THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE
       DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION.

       IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT
       HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY
       THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
       INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
       SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR
       LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY
       OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
       SUCH DAMAGES.