Provided by: perl-doc_5.38.2-3.2build2_all bug

NAME

       Filter::Util::Call - Perl Source Filter Utility Module

SYNOPSIS

           use Filter::Util::Call ;

DESCRIPTION

       This module provides you with the framework to write Source Filters in Perl.

       An alternate interface to Filter::Util::Call is now available. See Filter::Simple for more
       details.

       A Perl Source Filter is implemented as a Perl module. The structure of the module can take
       one of two broadly similar formats. To distinguish between them, the first will be
       referred to as method filter and the second as closure filter.

       Here is a skeleton for the method filter:

           package MyFilter ;

           use Filter::Util::Call ;

           sub import
           {
               my($type, @arguments) = @_ ;
               filter_add([]) ;
           }

           sub filter
           {
               my($self) = @_ ;
               my($status) ;

               $status = filter_read() ;
               $status ;
           }

           1 ;

       and this is the equivalent skeleton for the closure filter:

           package MyFilter ;

           use Filter::Util::Call ;

           sub import
           {
               my($type, @arguments) = @_ ;

               filter_add(
                   sub
                   {
                       my($status) ;
                       $status = filter_read() ;
                       $status ;
                   } )
           }

           1 ;

       To make use of either of the two filter modules above, place the line below in a Perl
       source file.

           use MyFilter;

       In fact, the skeleton modules shown above are fully functional Source Filters, albeit
       fairly useless ones. All they does is filter the source stream without modifying it at
       all.

       As you can see both modules have a broadly similar structure. They both make use of the
       "Filter::Util::Call" module and both have an "import" method. The difference between them
       is that the method filter requires a filter method, whereas the closure filter gets the
       equivalent of a filter method with the anonymous sub passed to filter_add.

       To make proper use of the closure filter shown above you need to have a good understanding
       of the concept of a closure. See perlref for more details on the mechanics of closures.

   use Filter::Util::Call
       The following functions are exported by "Filter::Util::Call":

           filter_add()
           filter_read()
           filter_read_exact()
           filter_del()

   import()
       The "import" method is used to create an instance of the filter. It is called indirectly
       by Perl when it encounters the "use MyFilter" line in a source file (See "import" in
       perlfunc for more details on "import").

       It will always have at least one parameter automatically passed by Perl - this corresponds
       to the name of the package. In the example above it will be "MyFilter".

       Apart from the first parameter, import can accept an optional list of parameters. These
       can be used to pass parameters to the filter. For example:

           use MyFilter qw(a b c) ;

       will result in the @_ array having the following values:

           @_ [0] => "MyFilter"
           @_ [1] => "a"
           @_ [2] => "b"
           @_ [3] => "c"

       Before terminating, the "import" function must explicitly install the filter by calling
       "filter_add".

   filter_add()
       The function, "filter_add", actually installs the filter. It takes one parameter which
       should be a reference. The kind of reference used will dictate which of the two filter
       types will be used.

       If a CODE reference is used then a closure filter will be assumed.

       If a CODE reference is not used, a method filter will be assumed.  In a method filter, the
       reference can be used to store context information. The reference will be blessed into the
       package by "filter_add", unless the reference was already blessed.

       See the filters at the end of this documents for examples of using context information
       using both method filters and closure filters.

   filter() and anonymous sub
       Both the "filter" method used with a method filter and the anonymous sub used with a
       closure filter is where the main processing for the filter is done.

       The big difference between the two types of filter is that the method filter uses the
       object passed to the method to store any context data, whereas the closure filter uses the
       lexical variables that are maintained by the closure.

       Note that the single parameter passed to the method filter, $self, is the same reference
       that was passed to "filter_add" blessed into the filter's package. See the example filters
       later on for details of using $self.

       Here is a list of the common features of the anonymous sub and the filter() method.

       $_   Although $_ doesn't actually appear explicitly in the sample filters above, it is
            implicitly used in a number of places.

            Firstly, when either "filter" or the anonymous sub are called, a local copy of $_
            will automatically be created. It will always contain the empty string at this point.

            Next, both "filter_read" and "filter_read_exact" will append any source data that is
            read to the end of $_.

            Finally, when "filter" or the anonymous sub are finished processing, they are
            expected to return the filtered source using $_.

            This implicit use of $_ greatly simplifies the filter.

       $status
            The status value that is returned by the user's "filter" method or anonymous sub and
            the "filter_read" and "read_exact" functions take the same set of values, namely:

                < 0  Error
                = 0  EOF
                > 0  OK

       filter_read and filter_read_exact
            These functions are used by the filter to obtain either a line or block from the next
            filter in the chain or the actual source file if there aren't any other filters.

            The function "filter_read" takes two forms:

                $status = filter_read() ;
                $status = filter_read($size) ;

            The first form is used to request a line, the second requests a block.

            In line mode, "filter_read" will append the next source line to the end of the $_
            scalar.

            In block mode, "filter_read" will append a block of data which is <= $size to the end
            of the $_ scalar. It is important to emphasise the that "filter_read" will not
            necessarily read a block which is precisely $size bytes.

            If you need to be able to read a block which has an exact size, you can use the
            function "filter_read_exact". It works identically to "filter_read" in block mode,
            except it will try to read a block which is exactly $size bytes in length. The only
            circumstances when it will not return a block which is $size bytes long is on EOF or
            error.

            It is very important to check the value of $status after every call to "filter_read"
            or "filter_read_exact".

       filter_del
            The function, "filter_del", is used to disable the current filter. It does not affect
            the running of the filter. All it does is tell Perl not to call filter any more.

            See "Example 4: Using filter_del" for details.

       real_import
            Internal function which adds the filter, based on the filter_add argument type.

       unimport()
            May be used to disable a filter, but is rarely needed. See filter_del.

LIMITATIONS

       See "LIMITATIONS" in perlfilter for an overview of the general problems filtering code in
       a textual line-level only.

       __DATA__ is ignored
           The content from the __DATA__ block is not filtered.  This is a serious limitation,
           e.g. for the Switch module.  See <http://search.cpan.org/perldoc?Switch#LIMITATIONS>
           for more.

       Max. codesize limited to 32-bit
           Currently internal buffer lengths are limited to 32-bit only.

EXAMPLES

       Here are a few examples which illustrate the key concepts - as such most of them are of
       little practical use.

       The "examples" sub-directory has copies of all these filters implemented both as method
       filters and as closure filters.

   Example 1: A simple filter.
       Below is a method filter which is hard-wired to replace all occurrences of the string
       "Joe" to "Jim". Not particularly Useful, but it is the first example and I wanted to keep
       it simple.

           package Joe2Jim ;

           use Filter::Util::Call ;

           sub import
           {
               my($type) = @_ ;

               filter_add(bless []) ;
           }

           sub filter
           {
               my($self) = @_ ;
               my($status) ;

               s/Joe/Jim/g
                   if ($status = filter_read()) > 0 ;
               $status ;
           }

           1 ;

       Here is an example of using the filter:

           use Joe2Jim ;
           print "Where is Joe?\n" ;

       And this is what the script above will print:

           Where is Jim?

   Example 2: Using the context
       The previous example was not particularly useful. To make it more general purpose we will
       make use of the context data and allow any arbitrary from and to strings to be used. This
       time we will use a closure filter. To reflect its enhanced role, the filter is called
       "Subst".

           package Subst ;

           use Filter::Util::Call ;
           use Carp ;

           sub import
           {
               croak("usage: use Subst qw(from to)")
                   unless @_ == 3 ;
               my ($self, $from, $to) = @_ ;
               filter_add(
                   sub
                   {
                       my ($status) ;
                       s/$from/$to/
                           if ($status = filter_read()) > 0 ;
                       $status ;
                   })
           }
           1 ;

       and is used like this:

           use Subst qw(Joe Jim) ;
           print "Where is Joe?\n" ;

   Example 3: Using the context within the filter
       Here is a filter which a variation of the "Joe2Jim" filter. As well as substituting all
       occurrences of "Joe" to "Jim" it keeps a count of the number of substitutions made in the
       context object.

       Once EOF is detected ($status is zero) the filter will insert an extra line into the
       source stream. When this extra line is executed it will print a count of the number of
       substitutions actually made.  Note that $status is set to 1 in this case.

           package Count ;

           use Filter::Util::Call ;

           sub filter
           {
               my ($self) = @_ ;
               my ($status) ;

               if (($status = filter_read()) > 0 ) {
                   s/Joe/Jim/g ;
                   ++ $$self ;
               }
               elsif ($$self >= 0) { # EOF
                   $_ = "print q[Made ${$self} substitutions\n]" ;
                   $status = 1 ;
                   $$self = -1 ;
               }

               $status ;
           }

           sub import
           {
               my ($self) = @_ ;
               my ($count) = 0 ;
               filter_add(\$count) ;
           }

           1 ;

       Here is a script which uses it:

           use Count ;
           print "Hello Joe\n" ;
           print "Where is Joe\n" ;

       Outputs:

           Hello Jim
           Where is Jim
           Made 2 substitutions

   Example 4: Using filter_del
       Another variation on a theme. This time we will modify the "Subst" filter to allow a
       starting and stopping pattern to be specified as well as the from and to patterns. If you
       know the vi editor, it is the equivalent of this command:

           :/start/,/stop/s/from/to/

       When used as a filter we want to invoke it like this:

           use NewSubst qw(start stop from to) ;

       Here is the module.

           package NewSubst ;

           use Filter::Util::Call ;
           use Carp ;

           sub import
           {
               my ($self, $start, $stop, $from, $to) = @_ ;
               my ($found) = 0 ;
               croak("usage: use Subst qw(start stop from to)")
                   unless @_ == 5 ;

               filter_add(
                   sub
                   {
                       my ($status) ;

                       if (($status = filter_read()) > 0) {

                           $found = 1
                               if $found == 0 and /$start/ ;

                           if ($found) {
                               s/$from/$to/ ;
                               filter_del() if /$stop/ ;
                           }

                       }
                       $status ;
                   } )

           }

           1 ;

Filter::Simple

       If you intend using the Filter::Call functionality, I would strongly recommend that you
       check out Damian Conway's excellent Filter::Simple module. Damian's module provides a much
       cleaner interface than Filter::Util::Call. Although it doesn't allow the fine control that
       Filter::Util::Call does, it should be adequate for the majority of applications. It's
       available at

          http://search.cpan.org/dist/Filter-Simple/

AUTHOR

       Paul Marquess

DATE

       26th January 1996

LICENSE

       Copyright (c) 1995-2011 Paul Marquess. All rights reserved.  Copyright (c) 2011-2014,
       2018-2022 Reini Urban. All rights reserved.  Copyright (c) 2014-2017 cPanel Inc. All
       rights reserved.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.