Provided by: liblog-log4perl-perl_1.57-1_all bug

NAME

       Log::Log4perl::Filter - Log4perl Custom Filter Base Class

SYNOPSIS

         use Log::Log4perl;

         Log::Log4perl->init(\ <<'EOT');
           log4perl.logger = INFO, Screen
           log4perl.filter.MyFilter        = sub { /let this through/ }
           log4perl.appender.Screen        = Log::Log4perl::Appender::Screen
           log4perl.appender.Screen.Filter = MyFilter
           log4perl.appender.Screen.layout = Log::Log4perl::Layout::SimpleLayout
         EOT

             # Define a logger
         my $logger = Log::Log4perl->get_logger("Some");

             # Let this through
         $logger->info("Here's the info, let this through!");

             # Suppress this
         $logger->info("Here's the info, suppress this!");

         #################################################################
         # StringMatch Filter:
         #################################################################
         log4perl.filter.M1               = Log::Log4perl::Filter::StringMatch
         log4perl.filter.M1.StringToMatch = let this through
         log4perl.filter.M1.AcceptOnMatch = true

         #################################################################
         # LevelMatch Filter:
         #################################################################
         log4perl.filter.M1               = Log::Log4perl::Filter::LevelMatch
         log4perl.filter.M1.LevelToMatch  = INFO
         log4perl.filter.M1.AcceptOnMatch = true

DESCRIPTION

       Log4perl allows the use of customized filters in its appenders to control the output of
       messages. These filters might grep for certain text chunks in a message, verify that its
       priority matches or exceeds a certain level or that this is the 10th time the same message
       has been submitted -- and come to a log/no log decision based upon these circumstantial
       facts.

       Filters have names and can be specified in two different ways in the Log4perl
       configuration file: As subroutines or as filter classes. Here's a simple filter named
       "MyFilter" which just verifies that the oncoming message matches the regular expression
       "/let this through/i":

           log4perl.filter.MyFilter        = sub { /let this through/i }

       It exploits the fact that when the subroutine defined above is called on a message, Perl's
       special $_ variable will be set to the message text (prerendered, i.e. concatenated but
       not layouted) to be logged.  The subroutine is expected to return a true value if it wants
       the message to be logged or a false value if doesn't.

       Also, Log::Log4perl will pass a hash to the subroutine, containing all key/value pairs
       that it would pass to the corresponding appender, as specified in Log::Log4perl::Appender.
       Here's an example of a filter checking the priority of the oncoming message:

         log4perl.filter.MyFilter        = sub {    \
              my %p = @_;                           \
              if($p{log4p_level} eq "WARN" or       \
                 $p{log4p_level} eq "INFO") {       \
                  return 1;                         \
              }                                     \
              return 0;                             \
         }

       If the message priority equals "WARN" or "INFO", it returns a true value, causing the
       message to be logged.

   Predefined Filters
       For common tasks like verifying that the message priority matches a certain priority,
       there's already a set of predefined filters available. To perform an exact level match,
       it's much cleaner to use Log4perl's "LevelMatch" filter instead:

         log4perl.filter.M1               = Log::Log4perl::Filter::LevelMatch
         log4perl.filter.M1.LevelToMatch  = INFO
         log4perl.filter.M1.AcceptOnMatch = true

       This will let the message through if its priority is INFO and suppress it otherwise. The
       statement can be negated by saying

         log4perl.filter.M1.AcceptOnMatch = false

       instead. This way, the message will be logged if its priority is anything but INFO.

       On a similar note, Log4perl's "StringMatch" filter will check the oncoming message for
       strings or regular expressions:

         log4perl.filter.M1               = Log::Log4perl::Filter::StringMatch
         log4perl.filter.M1.StringToMatch = bl.. bl..
         log4perl.filter.M1.AcceptOnMatch = true

       This will open the gate for messages like "blah blah" because the regular expression in
       the "StringToMatch" matches them. Again, the setting of "AcceptOnMatch" determines if the
       filter is defined in a positive or negative way.

       All class filter entries in the configuration file have to adhere to the following rule:
       Only after a filter has been defined by name and class/subroutine, its attribute values
       can be assigned, just like the "true" value above gets assigned to the "AcceptOnMatch"
       attribute after the filter "M1" has been defined.

   Attaching a filter to an appender
       Attaching a filter to an appender is as easy as assigning its name to the appender's
       "Filter" attribute:

           log4perl.appender.MyAppender.Filter = MyFilter

       This will cause "Log::Log4perl" to call the filter subroutine/method every time a message
       is supposed to be passed to the appender. Depending on the filter's return value,
       "Log::Log4perl" will either continue as planned or withdraw immediately.

   Combining filters with Log::Log4perl::Filter::Boolean
       Sometimes, it's useful to combine the output of various filters to arrive at a log/no log
       decision. While Log4j, Log4perl's mother ship, has chosen to implement this feature as a
       filter chain, similar to Linux' IP chains, Log4perl tries a different approach.

       Typically, filter results will not need to be bumped along chains but combined in a
       programmatic manner using boolean logic. "Log if this filter says 'yes' and that filter
       says 'no'" is a fairly common requirement, but hard to implement as a chain.

       "Log::Log4perl::Filter::Boolean" is a specially predefined custom filter for Log4perl. It
       combines the results of other custom filters in arbitrary ways, using boolean expressions:

           log4perl.logger = WARN, AppWarn, AppError

           log4perl.filter.Match1       = sub { /let this through/ }
           log4perl.filter.Match2       = sub { /and that, too/ }
           log4perl.filter.MyBoolean       = Log::Log4perl::Filter::Boolean
           log4perl.filter.MyBoolean.logic = Match1 || Match2

           log4perl.appender.Screen        = Log::Log4perl::Appender::Screen
           log4perl.appender.Screen.Filter = MyBoolean
           log4perl.appender.Screen.layout = Log::Log4perl::Layout::SimpleLayout

       "Log::Log4perl::Filter::Boolean"'s boolean expressions allow for combining different
       appenders by name using AND (&& or &), OR (|| or |) and NOT (!) as logical expressions.
       Also, parentheses can be used for defining precedences.  Operator precedence follows
       standard Perl conventions. Here's a bunch of examples:

           Match1 && !Match2            # Match1 and not Match2
           !(Match1 || Match2)          # Neither Match1 nor Match2
           (Match1 && Match2) || Match3 # Both Match1 and Match2 or Match3

   Writing your own filter classes
       If none of Log::Log4perl's predefined filter classes fits your needs, you can easily roll
       your own: Just define a new class, derive it from the baseclass "Log::Log4perl::Filter",
       and define its "new" and "ok" methods like this:

           package Log::Log4perl::Filter::MyFilter;

           use base Log::Log4perl::Filter;

           sub new {
               my ($class, %options) = @_;

               my $self = { %options,
                          };

               bless $self, $class;

               return $self;
           }

           sub ok {
                my ($self, %p) = @_;

                # ... decide and return 1 or 0
           }

           1;

       Log4perl will call the ok() method to determine if the filter should let the message pass
       or not. A true return value indicates the message will be logged by the appender, a false
       value blocks it.

       Values you've defined for its attributes in Log4perl's configuration file, will be
       received through its "new" method:

           log4perl.filter.MyFilter       = Log::Log4perl::Filter::MyFilter
           log4perl.filter.MyFilter.color = red

       will cause "Log::Log4perl::Filter::MyFilter"'s constructor to be called like this:

           Log::Log4perl::Filter::MyFilter->new( name  => "MyFilter",
                                                 color => "red" );

       The custom filter class should use this to set the object's attributes, to have them
       available later to base log/nolog decisions on it.

       "ok()" is the filter's method to tell if it agrees or disagrees with logging the message.
       It will be called by Log::Log4perl whenever it needs the filter to decide. A false value
       returned by "ok()" will block messages, a true value will let them through.

   A Practical Example: Level Matching
       See Log::Log4perl::FAQ for this.

SEE ALSO

       Log::Log4perl::Filter::LevelMatch, Log::Log4perl::Filter::LevelRange,
       Log::Log4perl::Filter::StringRange, Log::Log4perl::Filter::Boolean

LICENSE

       Copyright 2002-2013 by Mike Schilli <m@perlmeister.com> and Kevin Goess <cpan@goess.org>.

       This library is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.

AUTHOR

       Please contribute patches to the project on Github:

           http://github.com/mschilli/log4perl

       Send bug reports or requests for enhancements to the authors via our

       MAILING LIST (questions, bug reports, suggestions/patches):
       log4perl-devel@lists.sourceforge.net

       Authors (please contact them via the list above, not directly): Mike Schilli
       <m@perlmeister.com>, Kevin Goess <cpan@goess.org>

       Contributors (in alphabetical order): Ateeq Altaf, Cory Bennett, Jens Berthold, Jeremy
       Bopp, Hutton Davidson, Chris R. Donnelly, Matisse Enzer, Hugh Esco, Anthony Foiani, James
       FitzGibbon, Carl Franks, Dennis Gregorovic, Andy Grundman, Paul Harrington, Alexander
       Hartmaier  David Hull, Robert Jacobson, Jason Kohles, Jeff Macdonald, Markus Peter, Brett
       Rann, Peter Rabbitson, Erik Selberg, Aaron Straup Cope, Lars Thegler, David Viner, Mac
       Yang.