Provided by: libmail-transport-perl_3.005-2_all bug

NAME

       Mail::Transport::Send - send a message

INHERITANCE

        Mail::Transport::Send
          is a Mail::Transport
          is a Mail::Reporter

        Mail::Transport::Send is extended by
          Mail::Transport::Exim
          Mail::Transport::Mailx
          Mail::Transport::Qmail
          Mail::Transport::SMTP
          Mail::Transport::Sendmail

SYNOPSIS

        my $message = Mail::Message->new(...);

        # Some extensions implement sending:
        $message->send;
        $message->send(via => 'sendmail');

        my $sender = Mail::Transport::SMTP->new(...);
        $sender->send($message);

DESCRIPTION

       Send a message to the destinations as specified in the header.  The
       "Mail::Transport::Send" module is capable of autodetecting which of the following modules
       work on your system; you may simply call "send" without "via" options to get a message
       transported.

       •   Mail::Transport::Sendmail

           Use sendmail to process and deliver the mail.  This requires the "sendmail" program to
           be installed on your system.  Whether this is an original sendmail, or a replacement
           from Postfix does matter.

       •   Mail::Transport::Exim

           Use "exim" to distribute the message.

       •   Mail::Transport::Qmail

           Use "qmail-inject" to distribute the message.

       •   Mail::Transport::SMTP

           In this case, Perl is handling mail transport on its own.  This is less desired but
           more portable than sending with sendmail or qmail.  The advantage is that this sender
           is environment independent, and easier to configure.  However, there is no daemon
           involved which means that your program will wait until the message is delivered, and
           the message is lost when your program is interrupted during delivery (which may take
           hours to complete).

       •   Mail::Transport::Mailx

           Use the external "mail", "mailx", or "Mail" programs to send the message.  Usually,
           the result is poor, because some versions of these programs do not support MIME
           headers.  Besides, these programs are known to have exploitable security breaches.

       Extends "DESCRIPTION" in Mail::Transport.

METHODS

       Extends "METHODS" in Mail::Transport.

   Constructors
       Extends "Constructors" in Mail::Transport.

       Mail::Transport::Send->new(%options)
            -Option    --Defined in     --Default
             executable  Mail::Transport  undef
             hostname    Mail::Transport  'localhost'
             interval    Mail::Transport  30
             log         Mail::Reporter   'WARNINGS'
             password    Mail::Transport  undef
             port        Mail::Transport  undef
             proxy       Mail::Transport  undef
             retry       Mail::Transport  <false>
             timeout     Mail::Transport  120
             trace       Mail::Reporter   'WARNINGS'
             username    Mail::Transport  undef
             via         Mail::Transport  'sendmail'

           executable => FILENAME
           hostname => HOSTNAME|ARRAY
           interval => SECONDS
           log => LEVEL
           password => STRING
           port => INTEGER
           proxy => PATH
           retry => NUMBER|undef
           timeout => SECONDS
           trace => LEVEL
           username => STRING
           via => CLASS|NAME

   Sending mail
       $obj->destinations( $message, [$address|ARRAY] )
           Determine the destination for this message.  If a valid $address is defined, this is
           used to overrule the addresses within the message.  If the $address is "undef" it is
           ignored.  It may also be an ARRAY of addresses.

           If no $address is specified, the message is scanned for resent groups (see
           Mail::Message::Head::Complete::resentGroups()).  The addresses found in the first (is
           latest added) group are used.  If no resent groups are found, the normal "To", "Cc",
           and "Bcc" lines are taken.

       $obj->putContent($message, $fh, %options)
           Print the content of the $message to the $fh.

            -Option     --Default
             body_only    <false>
             undisclosed  <false>

           body_only => BOOLEAN
             Print only the body of the message, not the whole.

           undisclosed => BOOLEAN
             Do not print the "Bcc" and "Resent-Bcc" lines.  Default false, which means that they
             are not printed.

       $obj->send($message, %options)
           Transmit the $message, which may be anything what can be coerced into a Mail::Message,
           so including Mail::Internet and MIME::Entity messages.  It returns true when the
           transmission was successfully completed.

            -Option  --Default
             interval  new(interval)
             retry     new(retry)
             to        undef

           interval => SECONDS
           retry => INTEGER
           to => STRING
             Overrules the destination(s) of the message, which is by default taken from the
             (Resent-)To, (Resent-)Cc, and (Resent-)Bcc.

       $obj->trySend($message, %options)
           Try to send the message. This will return true if successful, and false in case some
           problems where detected.  The $? contains the exit status of the command which was
           started.

   Server connection
       Extends "Server connection" in Mail::Transport.

       $obj->findBinary( $name, [@directories] )
           Inherited, see "Server connection" in Mail::Transport

       $obj->remoteHost()
           Inherited, see "Server connection" in Mail::Transport

       $obj->retry()
           Inherited, see "Server connection" in Mail::Transport

   Error handling
       Extends "Error handling" in Mail::Transport.

       $obj->AUTOLOAD()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->addReport($object)
           Inherited, see "Error handling" in Mail::Reporter

       $obj->defaultTrace( [$level]|[$loglevel, $tracelevel]|[$level, $callback] )
       Mail::Transport::Send->defaultTrace( [$level]|[$loglevel, $tracelevel]|[$level, $callback]
       )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->errors()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->log( [$level, [$strings]] )
       Mail::Transport::Send->log( [$level, [$strings]] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->logPriority($level)
       Mail::Transport::Send->logPriority($level)
           Inherited, see "Error handling" in Mail::Reporter

       $obj->logSettings()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->notImplemented()
           Inherited, see "Error handling" in Mail::Reporter

       $obj->report( [$level] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->reportAll( [$level] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->trace( [$level] )
           Inherited, see "Error handling" in Mail::Reporter

       $obj->warnings()
           Inherited, see "Error handling" in Mail::Reporter

   Cleanup
       Extends "Cleanup" in Mail::Transport.

       $obj->DESTROY()
           Inherited, see "Cleanup" in Mail::Reporter

DIAGNOSTICS

       Warning: Message has no destination
           It was not possible to figure-out where the message is intended to go to.

       Error: Package $package does not implement $method.
           Fatal error: the specific package (or one of its superclasses) does not implement this
           method where it should. This message means that some other related classes do
           implement this method however the class at hand does not.  Probably you should
           investigate this and probably inform the author of the package.

       Warning: Resent group does not specify a destination
           The message which is sent is the result of a bounce (for instance created with
           Mail::Message::bounce()), and therefore starts with a "Received" header field.  With
           the "bounce", the new destination(s) of the message are given, which should be
           included as "Resent-To", "Resent-Cc", and "Resent-Bcc".

           The "To", "Cc", and "Bcc" header information is only used if no "Received" was found.
           That seems to be the best explanation of the RFC.

           As alternative, you may also specify the "to" option to some of the senders (for
           instance Mail::Transport::SMTP::send(to) to overrule any information found in the
           message itself about the destination.

       Error: Transporters of type $class cannot send.
           The Mail::Transport object of the specified type can not send messages, but only
           receive message.

SEE ALSO

       This module is part of Mail-Transport distribution version 3.005, built on July 22, 2020.
       Website: http://perl.overmeer.net/CPAN/

LICENSE

       Copyrights 2001-2020 by [Mark Overmeer]. For other contributors see ChangeLog.

       This program is free software; you can redistribute it and/or modify it under the same
       terms as Perl itself.  See http://dev.perl.org/licenses/