Provided by: libsql-abstract-classic-perl_1.91-4_all bug

NAME

       SQL::Abstract::Classic - Generate SQL from Perl data structures

SYNOPSIS

           use SQL::Abstract::Classic;

           my $sql = SQL::Abstract::Classic->new;

           my($stmt, @bind) = $sql->select($source, \@fields, \%where, $order);

           my($stmt, @bind) = $sql->insert($table, \%fieldvals || \@values);

           my($stmt, @bind) = $sql->update($table, \%fieldvals, \%where);

           my($stmt, @bind) = $sql->delete($table, \%where);

           # Then, use these in your DBI statements
           my $sth = $dbh->prepare($stmt);
           $sth->execute(@bind);

           # Just generate the WHERE clause
           my($stmt, @bind) = $sql->where(\%where, $order);

           # Return values in the same order, for hashed queries
           # See PERFORMANCE section for more details
           my @bind = $sql->values(\%fieldvals);

Low-impact fork of SQL::Abstract v1.81 ( 2014-10-25 )

       This module is nearly identical to SQL::Abstract v1.81
        <https://metacpan.org/release/RIBASUSHI/SQL-Abstract-1.81>. A recent flurry of activity
       on the original SQL::Abstract namespace risks leaving downstream users without a way to
       opt out of impending developments.  Therefore this module exists to preserve the ability
       of users to opt into the new way of doing things according to their own schedules.

DESCRIPTION

       This module was inspired by the excellent DBIx::Abstract.  However, in using that module I
       found that what I really wanted to do was generate SQL, but still retain complete control
       over my statement handles and use the DBI interface. So, I set out to create an abstract
       SQL generation module.

       While based on the concepts used by DBIx::Abstract, there are several important
       differences, especially when it comes to WHERE clauses. I have modified the concepts used
       to make the SQL easier to generate from Perl data structures and, IMO, more intuitive.
       The underlying idea is for this module to do what you mean, based on the data structures
       you provide it. The big advantage is that you don't have to modify your code every time
       your data changes, as this module figures it out.

       To begin with, an SQL INSERT is as easy as just specifying a hash of "key=value" pairs:

           my %data = (
               name => 'Jimbo Bobson',
               phone => '123-456-7890',
               address => '42 Sister Lane',
               city => 'St. Louis',
               state => 'Louisiana',
           );

       The SQL can then be generated with this:

           my($stmt, @bind) = $sql->insert('people', \%data);

       Which would give you something like this:

           $stmt = "INSERT INTO people
                           (address, city, name, phone, state)
                           VALUES (?, ?, ?, ?, ?)";
           @bind = ('42 Sister Lane', 'St. Louis', 'Jimbo Bobson',
                    '123-456-7890', 'Louisiana');

       These are then used directly in your DBI code:

           my $sth = $dbh->prepare($stmt);
           $sth->execute(@bind);

   Inserting and Updating Arrays
       If your database has array types (like for example Postgres), activate the special option
       "array_datatypes => 1" when creating the "SQL::Abstract::Classic" object.  Then you may
       use an arrayref to insert and update database array types:

           my $sql = SQL::Abstract::Classic->new(array_datatypes => 1);
           my %data = (
               planets => [qw/Mercury Venus Earth Mars/]
           );

           my($stmt, @bind) = $sql->insert('solar_system', \%data);

       This results in:

           $stmt = "INSERT INTO solar_system (planets) VALUES (?)"

           @bind = (['Mercury', 'Venus', 'Earth', 'Mars']);

   Inserting and Updating SQL
       In order to apply SQL functions to elements of your %data you may specify a reference to
       an arrayref for the given hash value. For example, if you need to execute the Oracle
       "to_date" function on a value, you can say something like this:

           my %data = (
               name => 'Bill',
               date_entered => \[ "to_date(?,'MM/DD/YYYY')", "03/02/2003" ],
           );

       The first value in the array is the actual SQL. Any other values are optional and would be
       included in the bind values array. This gives you:

           my($stmt, @bind) = $sql->insert('people', \%data);

           $stmt = "INSERT INTO people (name, date_entered)
                       VALUES (?, to_date(?,'MM/DD/YYYY'))";
           @bind = ('Bill', '03/02/2003');

       An UPDATE is just as easy, all you change is the name of the function:

           my($stmt, @bind) = $sql->update('people', \%data);

       Notice that your %data isn't touched; the module will generate the appropriately quirky
       SQL for you automatically. Usually you'll want to specify a WHERE clause for your UPDATE,
       though, which is where handling %where hashes comes in handy...

   Complex where statements
       This module can generate pretty complicated WHERE statements easily. For example, simple
       "key=value" pairs are taken to mean equality, and if you want to see if a field is within
       a set of values, you can use an arrayref. Let's say we wanted to SELECT some data based on
       this criteria:

           my %where = (
              requestor => 'inna',
              worker => ['nwiger', 'rcwe', 'sfz'],
              status => { '!=', 'completed' }
           );

           my($stmt, @bind) = $sql->select('tickets', '*', \%where);

       The above would give you something like this:

           $stmt = "SELECT * FROM tickets WHERE
                       ( requestor = ? ) AND ( status != ? )
                       AND ( worker = ? OR worker = ? OR worker = ? )";
           @bind = ('inna', 'completed', 'nwiger', 'rcwe', 'sfz');

       Which you could then use in DBI code like so:

           my $sth = $dbh->prepare($stmt);
           $sth->execute(@bind);

       Easy, eh?

METHODS

       The methods are simple. There's one for every major SQL operation, and a constructor you
       use first. The arguments are specified in a similar order for each method (table, then
       fields, then a where clause) to try and simplify things.

   new(option => 'value')
       The "new()" function takes a list of options and values, and returns a new
       SQL::Abstract::Classic object which can then be used to generate SQL through the methods
       below. The options accepted are:

       case
           If set to 'lower', then SQL will be generated in all lowercase. By default SQL is
           generated in "textbook" case meaning something like:

               SELECT a_field FROM a_table WHERE some_field LIKE '%someval%'

           Any setting other than 'lower' is ignored.

       cmp This determines what the default comparison operator is. By default it is "=", meaning
           that a hash like this:

               %where = (name => 'nwiger', email => 'nate@wiger.org');

           Will generate SQL like this:

               WHERE name = 'nwiger' AND email = 'nate@wiger.org'

           However, you may want loose comparisons by default, so if you set "cmp" to "like" you
           would get SQL such as:

               WHERE name like 'nwiger' AND email like 'nate@wiger.org'

           You can also override the comparison on an individual basis - see the huge section on
           "WHERE CLAUSES" at the bottom.

       sqltrue, sqlfalse
           Expressions for inserting boolean values within SQL statements.  By default these are
           "1=1" and "1=0". They are used by the special operators "-in" and "-not_in" for
           generating correct SQL even when the argument is an empty array (see below).

       logic
           This determines the default logical operator for multiple WHERE statements in arrays
           or hashes. If absent, the default logic is "or" for arrays, and "and" for hashes. This
           means that a WHERE array of the form:

               @where = (
                   event_date => {'>=', '2/13/99'},
                   event_date => {'<=', '4/24/03'},
               );

           will generate SQL like this:

               WHERE event_date >= '2/13/99' OR event_date <= '4/24/03'

           This is probably not what you want given this query, though (look at the dates). To
           change the "OR" to an "AND", simply specify:

               my $sql = SQL::Abstract::Classic->new(logic => 'and');

           Which will change the above "WHERE" to:

               WHERE event_date >= '2/13/99' AND event_date <= '4/24/03'

           The logic can also be changed locally by inserting a modifier in front of an arrayref:

               @where = (-and => [event_date => {'>=', '2/13/99'},
                                  event_date => {'<=', '4/24/03'} ]);

           See the "WHERE CLAUSES" section for explanations.

       convert
           This will automatically convert comparisons using the specified SQL function for both
           column and value. This is mostly used with an argument of "upper" or "lower", so that
           the SQL will have the effect of case-insensitive "searches". For example, this:

               $sql = SQL::Abstract::Classic->new(convert => 'upper');
               %where = (keywords => 'MaKe iT CAse inSeNSItive');

           Will turn out the following SQL:

               WHERE upper(keywords) like upper('MaKe iT CAse inSeNSItive')

           The conversion can be "upper()", "lower()", or any other SQL function that can be
           applied symmetrically to fields (actually SQL::Abstract::Classic does not validate
           this option; it will just pass through what you specify verbatim).

       bindtype
           This is a kludge because many databases suck. For example, you can't just bind values
           using DBI's "execute()" for Oracle "CLOB" or "BLOB" fields.  Instead, you have to use
           "bind_param()":

               $sth->bind_param(1, 'reg data');
               $sth->bind_param(2, $lots, {ora_type => ORA_CLOB});

           The problem is, SQL::Abstract::Classic will normally just return a @bind array, which
           loses track of which field each slot refers to. Fear not.

           If you specify "bindtype" in new, you can determine how @bind is returned.  Currently,
           you can specify either "normal" (default) or "columns". If you specify "columns", you
           will get an array that looks like this:

               my $sql = SQL::Abstract::Classic->new(bindtype => 'columns');
               my($stmt, @bind) = $sql->insert(...);

               @bind = (
                   [ 'column1', 'value1' ],
                   [ 'column2', 'value2' ],
                   [ 'column3', 'value3' ],
               );

           You can then iterate through this manually, using DBI's "bind_param()".

               $sth->prepare($stmt);
               my $i = 1;
               for (@bind) {
                   my($col, $data) = @$_;
                   if ($col eq 'details' || $col eq 'comments') {
                       $sth->bind_param($i, $data, {ora_type => ORA_CLOB});
                   } elsif ($col eq 'image') {
                       $sth->bind_param($i, $data, {ora_type => ORA_BLOB});
                   } else {
                       $sth->bind_param($i, $data);
                   }
                   $i++;
               }
               $sth->execute;      # execute without @bind now

           Now, why would you still use SQL::Abstract::Classic if you have to do this crap?
           Basically, the advantage is still that you don't have to care which fields are or are
           not included. You could wrap that above "for" loop in a simple sub called
           "bind_fields()" or something and reuse it repeatedly. You still get a layer of
           abstraction over manual SQL specification.

           Note that if you set "bindtype" to "columns", the "\[ $sql, @bind ]" construct (see
           "Literal SQL with placeholders and bind values (subqueries)") will expect the bind
           values in this format.

       quote_char
           This is the character that a table or column name will be quoted with.  By default
           this is an empty string, but you could set it to the character "`", to generate SQL
           like this:

             SELECT `a_field` FROM `a_table` WHERE `some_field` LIKE '%someval%'

           Alternatively, you can supply an array ref of two items, the first being the left hand
           quote character, and the second the right hand quote character. For example, you could
           supply "['[',']']" for SQL Server 2000 compliant quotes that generates SQL like this:

             SELECT [a_field] FROM [a_table] WHERE [some_field] LIKE '%someval%'

           Quoting is useful if you have tables or columns names that are reserved words in your
           database's SQL dialect.

       escape_char
           This is the character that will be used to escape "quote_char"s appearing in an
           identifier before it has been quoted.

           The parameter default in case of a single "quote_char" character is the quote
           character itself.

           When opening-closing-style quoting is used ("quote_char" is an arrayref) this
           parameter defaults to the closing (right) "quote_char". Occurrences of the opening
           (left) "quote_char" within the identifier are currently left untouched. The default
           for opening-closing-style quotes may change in future versions, thus you are strongly
           encouraged to specify the escape character explicitly.

       name_sep
           This is the character that separates a table and column name.  It is necessary to
           specify this when the "quote_char" option is selected, so that tables and column names
           can be individually quoted like this:

             SELECT `table`.`one_field` FROM `table` WHERE `table`.`other_field` = 1

       injection_guard
           A regular expression "qr/.../" that is applied to any "-function" and unquoted column
           name specified in a query structure. This is a safety mechanism to avoid injection
           attacks when mishandling user input e.g.:

             my %condition_as_column_value_pairs = get_values_from_user();
             $sqla->select( ... , \%condition_as_column_value_pairs );

           If the expression matches an exception is thrown. Note that literal SQL supplied via
           "\'...'" or "\['...']" is not checked in any way.

           Defaults to checking for ";" and the "GO" keyword (TransactSQL)

       array_datatypes
           When this option is true, arrayrefs in INSERT or UPDATE are interpreted as array
           datatypes and are passed directly to the DBI layer.  When this option is false,
           arrayrefs are interpreted as literal SQL, just like refs to arrayrefs (but this
           behavior is for backwards compatibility; when writing new queries, use the "reference
           to arrayref" syntax for literal SQL).

       special_ops
           Takes a reference to a list of "special operators" to extend the syntax understood by
           SQL::Abstract::Classic.  See section "SPECIAL OPERATORS" for details.

       unary_ops
           Takes a reference to a list of "unary operators" to extend the syntax understood by
           SQL::Abstract::Classic.  See section "UNARY OPERATORS" for details.

   insert($table, \@values || \%fieldvals, \%options)
       This is the simplest function. You simply give it a table name and either an arrayref of
       values or hashref of field/value pairs.  It returns an SQL INSERT statement and a list of
       bind values.  See the sections on "Inserting and Updating Arrays" and "Inserting and
       Updating SQL" for information on how to insert with those data types.

       The optional "\%options" hash reference may contain additional options to generate the
       insert SQL. Currently supported options are:

       returning
           Takes either a scalar of raw SQL fields, or an array reference of field names, and
           adds on an SQL "RETURNING" statement at the end.  This allows you to return data
           generated by the insert statement (such as row IDs) without performing another
           "SELECT" statement.  Note, however, this is not part of the SQL standard and may not
           be supported by all database engines.

   update($table, \%fieldvals, \%where)
       This takes a table, hashref of field/value pairs, and an optional hashref WHERE clause. It
       returns an SQL UPDATE function and a list of bind values.  See the sections on "Inserting
       and Updating Arrays" and "Inserting and Updating SQL" for information on how to insert
       with those data types.

   select($source, $fields, $where, $order)
       This returns a SQL SELECT statement and associated list of bind values, as specified by
       the arguments:

       $source
           Specification of the 'FROM' part of the statement.  The argument can be either a plain
           scalar (interpreted as a table name, will be quoted), or an arrayref (interpreted as a
           list of table names, joined by commas, quoted), or a scalarref (literal SQL, not
           quoted).

       $fields
           Specification of the list of fields to retrieve from the source.  The argument can be
           either an arrayref (interpreted as a list of field names, will be joined by commas and
           quoted), or a plain scalar (literal SQL, not quoted).  Please observe that this API is
           not as flexible as that of the first argument $source, for backwards compatibility
           reasons.

       $where
           Optional argument to specify the WHERE part of the query.  The argument is most often
           a hashref, but can also be an arrayref or plain scalar -- see section WHERE clause for
           details.

       $order
           Optional argument to specify the ORDER BY part of the query.  The argument can be a
           scalar, a hashref or an arrayref -- see section ORDER BY clause for details.

   delete($table, \%where)
       This takes a table name and optional hashref WHERE clause.  It returns an SQL DELETE
       statement and list of bind values.

   where(\%where, $order)
       This is used to generate just the WHERE clause. For example, if you have an arbitrary data
       structure and know what the rest of your SQL is going to look like, but want an easy way
       to produce a WHERE clause, use this. It returns an SQL WHERE clause and list of bind
       values.

   values(\%data)
       This just returns the values from the hash %data, in the same order that would be returned
       from any of the other above queries.  Using this allows you to markedly speed up your
       queries if you are affecting lots of rows. See below under the "PERFORMANCE" section.

   generate($any, 'number', $of, \@data, $struct, \%types)
       Warning: This is an experimental method and subject to change.

       This returns arbitrarily generated SQL. It's a really basic shortcut.  It will return two
       different things, depending on return context:

           my($stmt, @bind) = $sql->generate('create table', \$table, \@fields);
           my $stmt_and_val = $sql->generate('create table', \$table, \@fields);

       These would return the following:

           # First calling form
           $stmt = "CREATE TABLE test (?, ?)";
           @bind = (field1, field2);

           # Second calling form
           $stmt_and_val = "CREATE TABLE test (field1, field2)";

       Depending on what you're trying to do, it's up to you to choose the correct format. In
       this example, the second form is what you would want.

       By the same token:

           $sql->generate('alter session', { nls_date_format => 'MM/YY' });

       Might give you:

           ALTER SESSION SET nls_date_format = 'MM/YY'

       You get the idea. Strings get their case twiddled, but everything else remains verbatim.

WHERE CLAUSES

   Introduction
       This module uses a variation on the idea from DBIx::Abstract. It is NOT, repeat not 100%
       compatible. The main logic of this module is that things in arrays are OR'ed, and things
       in hashes are AND'ed.

       The easiest way to explain is to show lots of examples. After each %where hash shown, it
       is assumed you used:

           my($stmt, @bind) = $sql->where(\%where);

       However, note that the %where hash can be used directly in any of the other functions as
       well, as described above.

   Key-value pairs
       So, let's get started. To begin, a simple hash:

           my %where  = (
               user   => 'nwiger',
               status => 'completed'
           );

       Is converted to SQL "key = val" statements:

           $stmt = "WHERE user = ? AND status = ?";
           @bind = ('nwiger', 'completed');

       One common thing I end up doing is having a list of values that a field can be in. To do
       this, simply specify a list inside of an arrayref:

           my %where  = (
               user   => 'nwiger',
               status => ['assigned', 'in-progress', 'pending'];
           );

       This simple code will create the following:

           $stmt = "WHERE user = ? AND ( status = ? OR status = ? OR status = ? )";
           @bind = ('nwiger', 'assigned', 'in-progress', 'pending');

       A field associated to an empty arrayref will be considered a logical false and will
       generate 0=1.

   Tests for NULL values
       If the value part is "undef" then this is converted to SQL <IS NULL>

           my %where  = (
               user   => 'nwiger',
               status => undef,
           );

       becomes:

           $stmt = "WHERE user = ? AND status IS NULL";
           @bind = ('nwiger');

       To test if a column IS NOT NULL:

           my %where  = (
               user   => 'nwiger',
               status => { '!=', undef },
           );

   Specific comparison operators
       If you want to specify a different type of operator for your comparison, you can use a
       hashref for a given column:

           my %where  = (
               user   => 'nwiger',
               status => { '!=', 'completed' }
           );

       Which would generate:

           $stmt = "WHERE user = ? AND status != ?";
           @bind = ('nwiger', 'completed');

       To test against multiple values, just enclose the values in an arrayref:

           status => { '=', ['assigned', 'in-progress', 'pending'] };

       Which would give you:

           "WHERE status = ? OR status = ? OR status = ?"

       The hashref can also contain multiple pairs, in which case it is expanded into an "AND" of
       its elements:

           my %where  = (
               user   => 'nwiger',
               status => { '!=', 'completed', -not_like => 'pending%' }
           );

           # Or more dynamically, like from a form
           $where{user} = 'nwiger';
           $where{status}{'!='} = 'completed';
           $where{status}{'-not_like'} = 'pending%';

           # Both generate this
           $stmt = "WHERE user = ? AND status != ? AND status NOT LIKE ?";
           @bind = ('nwiger', 'completed', 'pending%');

       To get an OR instead, you can combine it with the arrayref idea:

           my %where => (
                user => 'nwiger',
                priority => [ { '=', 2 }, { '>', 5 } ]
           );

       Which would generate:

           $stmt = "WHERE ( priority = ? OR priority > ? ) AND user = ?";
           @bind = ('2', '5', 'nwiger');

       If you want to include literal SQL (with or without bind values), just use a scalar
       reference or reference to an arrayref as the value:

           my %where  = (
               date_entered => { '>' => \["to_date(?, 'MM/DD/YYYY')", "11/26/2008"] },
               date_expires => { '<' => \"now()" }
           );

       Which would generate:

           $stmt = "WHERE date_entered > to_date(?, 'MM/DD/YYYY') AND date_expires < now()";
           @bind = ('11/26/2008');

   Logic and nesting operators
       In the example above, there is a subtle trap if you want to say something like this
       (notice the "AND"):

           WHERE priority != ? AND priority != ?

       Because, in Perl you can't do this:

           priority => { '!=' => 2, '!=' => 1 }

       As the second "!=" key will obliterate the first. The solution is to use the special
       "-modifier" form inside an arrayref:

           priority => [ -and => {'!=', 2},
                                 {'!=', 1} ]

       Normally, these would be joined by "OR", but the modifier tells it to use "AND" instead.
       (Hint: You can use this in conjunction with the "logic" option to "new()" in order to
       change the way your queries work by default.) Important: Note that the "-modifier" goes
       INSIDE the arrayref, as an extra first element. This will NOT do what you think it might:

           priority => -and => [{'!=', 2}, {'!=', 1}]   # WRONG!

       Here is a quick list of equivalencies, since there is some overlap:

           # Same
           status => {'!=', 'completed', 'not like', 'pending%' }
           status => [ -and => {'!=', 'completed'}, {'not like', 'pending%'}]

           # Same
           status => {'=', ['assigned', 'in-progress']}
           status => [ -or => {'=', 'assigned'}, {'=', 'in-progress'}]
           status => [ {'=', 'assigned'}, {'=', 'in-progress'} ]

   Special operators: IN, BETWEEN, etc.
       You can also use the hashref format to compare a list of fields using the "IN" comparison
       operator, by specifying the list as an arrayref:

           my %where  = (
               status   => 'completed',
               reportid => { -in => [567, 2335, 2] }
           );

       Which would generate:

           $stmt = "WHERE status = ? AND reportid IN (?,?,?)";
           @bind = ('completed', '567', '2335', '2');

       The reverse operator "-not_in" generates SQL "NOT IN" and is used in the same way.

       If the argument to "-in" is an empty array, 'sqlfalse' is generated (by default: "1=0").
       Similarly, "-not_in => []" generates 'sqltrue' (by default: "1=1").

       In addition to the array you can supply a chunk of literal sql or literal sql with bind:

           my %where = {
             customer => { -in => \[
               'SELECT cust_id FROM cust WHERE balance > ?',
               2000,
             ],
             status => { -in => \'SELECT status_codes FROM states' },
           };

       would generate:

           $stmt = "WHERE (
                 customer IN ( SELECT cust_id FROM cust WHERE balance > ? )
             AND status IN ( SELECT status_codes FROM states )
           )";
           @bind = ('2000');

       Finally, if the argument to "-in" is not a reference, it will be treated as a single-
       element array.

       Another pair of operators is "-between" and "-not_between", used with an arrayref of two
       values:

           my %where  = (
               user   => 'nwiger',
               completion_date => {
                  -not_between => ['2002-10-01', '2003-02-06']
               }
           );

       Would give you:

           WHERE user = ? AND completion_date NOT BETWEEN ( ? AND ? )

       Just like with "-in" all plausible combinations of literal SQL are possible:

           my %where = {
             start0 => { -between => [ 1, 2 ] },
             start1 => { -between => \["? AND ?", 1, 2] },
             start2 => { -between => \"lower(x) AND upper(y)" },
             start3 => { -between => [
               \"lower(x)",
               \["upper(?)", 'stuff' ],
             ] },
           };

       Would give you:

           $stmt = "WHERE (
                 ( start0 BETWEEN ? AND ?                )
             AND ( start1 BETWEEN ? AND ?                )
             AND ( start2 BETWEEN lower(x) AND upper(y)  )
             AND ( start3 BETWEEN lower(x) AND upper(?)  )
           )";
           @bind = (1, 2, 1, 2, 'stuff');

       These are the two builtin "special operators"; but the list can be expanded: see section
       "SPECIAL OPERATORS" below.

   Unary operators: bool
       If you wish to test against boolean columns or functions within your database you can use
       the "-bool" and "-not_bool" operators. For example to test the column "is_user" being true
       and the column "is_enabled" being false you would use:-

           my %where  = (
               -bool       => 'is_user',
               -not_bool   => 'is_enabled',
           );

       Would give you:

           WHERE is_user AND NOT is_enabled

       If a more complex combination is required, testing more conditions, then you should use
       the and/or operators:-

           my %where  = (
               -and           => [
                   -bool      => 'one',
                   -not_bool  => { two=> { -rlike => 'bar' } },
                   -not_bool  => { three => [ { '=', 2 }, { '>', 5 } ] },
               ],
           );

       Would give you:

           WHERE
             one
               AND
             (NOT two RLIKE ?)
               AND
             (NOT ( three = ? OR three > ? ))

   Nested conditions, -and/-or prefixes
       So far, we've seen how multiple conditions are joined with a top-level "AND".  We can
       change this by putting the different conditions we want in hashes and then putting those
       hashes in an array. For example:

           my @where = (
               {
                   user   => 'nwiger',
                   status => { -like => ['pending%', 'dispatched'] },
               },
               {
                   user   => 'robot',
                   status => 'unassigned',
               }
           );

       This data structure would create the following:

           $stmt = "WHERE ( user = ? AND ( status LIKE ? OR status LIKE ? ) )
                       OR ( user = ? AND status = ? ) )";
           @bind = ('nwiger', 'pending', 'dispatched', 'robot', 'unassigned');

       Clauses in hashrefs or arrayrefs can be prefixed with an "-and" or "-or" to change the
       logic inside:

           my @where = (
                -and => [
                   user => 'nwiger',
                   [
                       -and => [ workhrs => {'>', 20}, geo => 'ASIA' ],
                       -or => { workhrs => {'<', 50}, geo => 'EURO' },
                   ],
               ],
           );

       That would yield:

           $stmt = "WHERE ( user = ?
                      AND ( ( workhrs > ? AND geo = ? )
                         OR ( workhrs < ? OR geo = ? ) ) )";
           @bind = ('nwiger', '20', 'ASIA', '50', 'EURO');

       Algebraic inconsistency, for historical reasons

       "Important note": when connecting several conditions, the "-and-"|"-or" operator goes
       "outside" of the nested structure; whereas when connecting several constraints on one
       column, the "-and" operator goes "inside" the arrayref. Here is an example combining both
       features:

          my @where = (
            -and => [a => 1, b => 2],
            -or  => [c => 3, d => 4],
             e   => [-and => {-like => 'foo%'}, {-like => '%bar'} ]
          )

       yielding

         WHERE ( (    ( a = ? AND b = ? )
                   OR ( c = ? OR d = ? )
                   OR ( e LIKE ? AND e LIKE ? ) ) )

       This difference in syntax is unfortunate but must be preserved for historical reasons. So
       be careful: the two examples below would seem algebraically equivalent, but they are not

         { col => [ -and =>
           { -like => 'foo%' },
           { -like => '%bar' },
         ] }
         # yields: WHERE ( ( col LIKE ? AND col LIKE ? ) )

         [ -and =>
           { col => { -like => 'foo%' } },
           { col => { -like => '%bar' } },
         ]
         # yields: WHERE ( ( col LIKE ? OR col LIKE ? ) )

   Literal SQL and value type operators
       The basic premise of SQL::Abstract::Classic is that in WHERE specifications the "left
       side" is a column name and the "right side" is a value (normally rendered as a
       placeholder). This holds true for both hashrefs and arrayref pairs as you see in the
       "WHERE CLAUSES" examples above. Sometimes it is necessary to alter this behavior. There
       are several ways of doing so.

       -ident

       This is a virtual operator that signals the string to its right side is an identifier (a
       column name) and not a value. For example to compare two columns you would write:

           my %where = (
               priority => { '<', 2 },
               requestor => { -ident => 'submitter' },
           );

       which creates:

           $stmt = "WHERE priority < ? AND requestor = submitter";
           @bind = ('2');

       If you are maintaining legacy code you may see a different construct as described in
       "Deprecated usage of Literal SQL", please use "-ident" in new code.

       -value

       This is a virtual operator that signals that the construct to its right side is a value to
       be passed to DBI. This is for example necessary when you want to write a where clause
       against an array (for RDBMS that support such datatypes). For example:

           my %where = (
               array => { -value => [1, 2, 3] }
           );

       will result in:

           $stmt = 'WHERE array = ?';
           @bind = ([1, 2, 3]);

       Note that if you were to simply say:

           my %where = (
               array => [1, 2, 3]
           );

       the result would probably not be what you wanted:

           $stmt = 'WHERE array = ? OR array = ? OR array = ?';
           @bind = (1, 2, 3);

       Literal SQL

       Finally, sometimes only literal SQL will do. To include a random snippet of SQL verbatim,
       you specify it as a scalar reference. Consider this only as a last resort. Usually there
       is a better way. For example:

           my %where = (
               priority => { '<', 2 },
               requestor => { -in => \'(SELECT name FROM hitmen)' },
           );

       Would create:

           $stmt = "WHERE priority < ? AND requestor IN (SELECT name FROM hitmen)"
           @bind = (2);

       Note that in this example, you only get one bind parameter back, since the verbatim SQL is
       passed as part of the statement.

       CAVEAT

         Never use untrusted input as a literal SQL argument - this is a massive
         security risk (there is no way to check literal snippets for SQL
         injections and other nastyness). If you need to deal with untrusted input
         use literal SQL with placeholders as described next.

       Literal SQL with placeholders and bind values (subqueries)

       If the literal SQL to be inserted has placeholders and bind values, use a reference to an
       arrayref (yes this is a double reference -- not so common, but perfectly legal Perl). For
       example, to find a date in Postgres you can use something like this:

           my %where = (
              date_column => \[ "= date '2008-09-30' - ?::integer", 10 ]
           )

       This would create:

           $stmt = "WHERE ( date_column = date '2008-09-30' - ?::integer )"
           @bind = ('10');

       Note that you must pass the bind values in the same format as they are returned by where.
       This means that if you set "bindtype" to "columns", you must provide the bind values in
       the "[ column_meta => value ]" format, where "column_meta" is an opaque scalar value; most
       commonly the column name, but you can use any scalar value (including references and
       blessed references), SQL::Abstract::Classic will simply pass it through intact. So if
       "bindtype" is set to "columns" the above example will look like:

           my %where = (
              date_column => \[ "= date '2008-09-30' - ?::integer", [ {} => 10 ] ]
           )

       Literal SQL is especially useful for nesting parenthesized clauses in the main SQL query.
       Here is a first example:

         my ($sub_stmt, @sub_bind) = ("SELECT c1 FROM t1 WHERE c2 < ? AND c3 LIKE ?",
                                      100, "foo%");
         my %where = (
           foo => 1234,
           bar => \["IN ($sub_stmt)" => @sub_bind],
         );

       This yields:

         $stmt = "WHERE (foo = ? AND bar IN (SELECT c1 FROM t1
                                                    WHERE c2 < ? AND c3 LIKE ?))";
         @bind = (1234, 100, "foo%");

       Other subquery operators, like for example "> ALL" or "NOT IN", are expressed in the same
       way. Of course the $sub_stmt and its associated bind values can be generated through a
       former call to "select()" :

         my ($sub_stmt, @sub_bind)
            = $sql->select("t1", "c1", {c2 => {"<" => 100},
                                        c3 => {-like => "foo%"}});
         my %where = (
           foo => 1234,
           bar => \["> ALL ($sub_stmt)" => @sub_bind],
         );

       In the examples above, the subquery was used as an operator on a column; but the same
       principle also applies for a clause within the main %where hash, like an EXISTS subquery:

         my ($sub_stmt, @sub_bind)
            = $sql->select("t1", "*", {c1 => 1, c2 => \"> t0.c0"});
         my %where = ( -and => [
           foo   => 1234,
           \["EXISTS ($sub_stmt)" => @sub_bind],
         ]);

       which yields

         $stmt = "WHERE (foo = ? AND EXISTS (SELECT * FROM t1
                                               WHERE c1 = ? AND c2 > t0.c0))";
         @bind = (1234, 1);

       Observe that the condition on "c2" in the subquery refers to column "t0.c0" of the main
       query: this is not a bind value, so we have to express it through a scalar ref.  Writing
       "c2 => {">" => "t0.c0"}" would have generated "c2 > ?" with bind value "t0.c0" ... not
       exactly what we wanted here.

       Finally, here is an example where a subquery is used for expressing unary negation:

         my ($sub_stmt, @sub_bind)
            = $sql->where({age => [{"<" => 10}, {">" => 20}]});
         $sub_stmt =~ s/^ where //i; # don't want "WHERE" in the subclause
         my %where = (
               lname  => {like => '%son%'},
               \["NOT ($sub_stmt)" => @sub_bind],
           );

       This yields

         $stmt = "lname LIKE ? AND NOT ( age < ? OR age > ? )"
         @bind = ('%son%', 10, 20)

       Deprecated usage of Literal SQL

       Below are some examples of archaic use of literal SQL. It is shown only as reference for
       those who deal with legacy code. Each example has a much better, cleaner and safer
       alternative that users should opt for in new code.

       •

               my %where = ( requestor => \'IS NOT NULL' )

               $stmt = "WHERE requestor IS NOT NULL"

           This used to be the way of generating NULL comparisons, before the handling of "undef"
           got formalized. For new code please use the superior syntax as described in "Tests for
           NULL values".

       •

               my %where = ( requestor => \'= submitter' )

               $stmt = "WHERE requestor = submitter"

           This used to be the only way to compare columns. Use the superior "-ident" method for
           all new code. For example an identifier declared in such a way will be properly quoted
           if "quote_char" is properly set, while the legacy form will remain as supplied.

       •

               my %where = ( is_ready  => \"", completed => { '>', '2012-12-21' } )

               $stmt = "WHERE completed > ? AND is_ready"
               @bind = ('2012-12-21')

           Using an empty string literal used to be the only way to express a boolean.  For all
           new code please use the much more readable -bool operator.

   Conclusion
       These pages could go on for a while, since the nesting of the data structures this module
       can handle are pretty much unlimited (the module implements the "WHERE" expansion as a
       recursive function internally). Your best bet is to "play around" with the module a little
       to see how the data structures behave, and choose the best format for your data based on
       that.

       And of course, all the values above will probably be replaced with variables gotten from
       forms or the command line. After all, if you knew everything ahead of time, you wouldn't
       have to worry about dynamically-generating SQL and could just hardwire it into your
       script.

ORDER BY CLAUSES

       Some functions take an order by clause. This can either be a scalar (just a column name),
       a hashref of "{ -desc => 'col' }" or "{ -asc => 'col' }", a scalarref, an arrayref-ref, or
       an arrayref of any of the previous forms. Examples:

                      Given              |         Will Generate
           ---------------------------------------------------------------
                                         |
           'colA'                        | ORDER BY colA
                                         |
           [qw/colA colB/]               | ORDER BY colA, colB
                                         |
           {-asc  => 'colA'}             | ORDER BY colA ASC
                                         |
           {-desc => 'colB'}             | ORDER BY colB DESC
                                         |
           ['colA', {-asc => 'colB'}]    | ORDER BY colA, colB ASC
                                         |
           { -asc => [qw/colA colB/] }   | ORDER BY colA ASC, colB ASC
                                         |
           \'colA DESC'                  | ORDER BY colA DESC
                                         |
           \[ 'FUNC(colA, ?)', $x ]      | ORDER BY FUNC(colA, ?)
                                         |   /* ...with $x bound to ? */
                                         |
           [                             | ORDER BY
             { -asc => 'colA' },         |     colA ASC,
             { -desc => [qw/colB/] },    |     colB DESC,
             { -asc => [qw/colC colD/] },|     colC ASC, colD ASC,
             \'colE DESC',               |     colE DESC,
             \[ 'FUNC(colF, ?)', $x ],   |     FUNC(colF, ?)
           ]                             |   /* ...with $x bound to ? */
           ===============================================================

SPECIAL OPERATORS

         my $sqlmaker = SQL::Abstract::Classic->new(special_ops => [
            {
             regex => qr/.../,
             handler => sub {
               my ($self, $field, $op, $arg) = @_;
               ...
             },
            },
            {
             regex => qr/.../,
             handler => 'method_name',
            },
          ]);

       A "special operator" is a SQL syntactic clause that can be applied to a field, instead of
       a usual binary operator.  For example:

          WHERE field IN (?, ?, ?)
          WHERE field BETWEEN ? AND ?
          WHERE MATCH(field) AGAINST (?, ?)

       Special operators IN and BETWEEN are fairly standard and therefore are builtin within
       "SQL::Abstract::Classic" (as the overridable methods "_where_field_IN" and
       "_where_field_BETWEEN"). For other operators, like the MATCH .. AGAINST example above
       which is specific to MySQL, you can write your own operator handlers - supply a
       "special_ops" argument to the "new" method. That argument takes an arrayref of operator
       definitions; each operator definition is a hashref with two entries:

       regex
           the regular expression to match the operator

       handler
           Either a coderef or a plain scalar method name. In both cases the expected return is
           "($sql, @bind)".

           When supplied with a method name, it is simply called on the SQL::Abstract::Classic
           object as:

            $self->$method_name ($field, $op, $arg)

            Where:

             $field is the LHS of the operator
             $op is the part that matched the handler regex
             $arg is the RHS

           When supplied with a coderef, it is called as:

            $coderef->($self, $field, $op, $arg)

       For example, here is an implementation of the MATCH .. AGAINST syntax for MySQL

         my $sqlmaker = SQL::Abstract::Classic->new(special_ops => [

           # special op for MySql MATCH (field) AGAINST(word1, word2, ...)
           {regex => qr/^match$/i,
            handler => sub {
              my ($self, $field, $op, $arg) = @_;
              $arg = [$arg] if not ref $arg;
              my $label         = $self->_quote($field);
              my ($placeholder) = $self->_convert('?');
              my $placeholders  = join ", ", (($placeholder) x @$arg);
              my $sql           = $self->_sqlcase('match') . " ($label) "
                                . $self->_sqlcase('against') . " ($placeholders) ";
              my @bind = $self->_bindtype($field, @$arg);
              return ($sql, @bind);
              }
            },

         ]);

UNARY OPERATORS

         my $sqlmaker = SQL::Abstract::Classic->new(unary_ops => [
            {
             regex => qr/.../,
             handler => sub {
               my ($self, $op, $arg) = @_;
               ...
             },
            },
            {
             regex => qr/.../,
             handler => 'method_name',
            },
          ]);

       A "unary operator" is a SQL syntactic clause that can be applied to a field - the operator
       goes before the field

       You can write your own operator handlers - supply a "unary_ops" argument to the "new"
       method. That argument takes an arrayref of operator definitions; each operator definition
       is a hashref with two entries:

       regex
           the regular expression to match the operator

       handler
           Either a coderef or a plain scalar method name. In both cases the expected return is
           $sql.

           When supplied with a method name, it is simply called on the SQL::Abstract::Classic
           object as:

            $self->$method_name ($op, $arg)

            Where:

             $op is the part that matched the handler regex
             $arg is the RHS or argument of the operator

           When supplied with a coderef, it is called as:

            $coderef->($self, $op, $arg)

PERFORMANCE

       Thanks to some benchmarking by Mark Stosberg, it turns out that this module is many orders
       of magnitude faster than using "DBIx::Abstract".  I must admit this wasn't an intentional
       design issue, but it's a byproduct of the fact that you get to control your "DBI" handles
       yourself.

       To maximize performance, use a code snippet like the following:

           # prepare a statement handle using the first row
           # and then reuse it for the rest of the rows
           my($sth, $stmt);
           for my $href (@array_of_hashrefs) {
               $stmt ||= $sql->insert('table', $href);
               $sth  ||= $dbh->prepare($stmt);
               $sth->execute($sql->values($href));
           }

       The reason this works is because the keys in your $href are sorted internally by
       SQL::Abstract::Classic. Thus, as long as your data retains the same structure, you only
       have to generate the SQL the first time around. On subsequent queries, simply use the
       "values" function provided by this module to return your values in the correct order.

       However this depends on the values having the same type - if, for example, the values of a
       where clause may either have values (resulting in sql of the form "column = ?" with a
       single bind value), or alternatively the values might be "undef" (resulting in sql of the
       form "column IS NULL" with no bind value) then the caching technique suggested will not
       work.

FORMBUILDER

       If you use my "CGI::FormBuilder" module at all, you'll hopefully really like this part (I
       do, at least). Building up a complex query can be as simple as the following:

           #!/usr/bin/perl

           use warnings;
           use strict;

           use CGI::FormBuilder;
           use SQL::Abstract::Classic;

           my $form = CGI::FormBuilder->new(...);
           my $sql  = SQL::Abstract::Classic->new;

           if ($form->submitted) {
               my $field = $form->field;
               my $id = delete $field->{id};
               my($stmt, @bind) = $sql->update('table', $field, {id => $id});
           }

       Of course, you would still have to connect using "DBI" to run the query, but the point is
       that if you make your form look like your table, the actual query script can be extremely
       simplistic.

       If you're REALLY lazy (I am), check out "HTML::QuickTable" for a fast interface to
       returning and formatting data. I frequently use these three modules together to write
       complex database query apps in under 50 lines.

ACKNOWLEDGEMENTS

       There are a number of individuals that have really helped out with this module.
       Unfortunately, most of them submitted bugs via CPAN so I have no idea who they are! But
       the people I do know are:

           Ash Berlin (order_by hash term support)
           Matt Trout (DBIx::Class support)
           Mark Stosberg (benchmarking)
           Chas Owens (initial "IN" operator support)
           Philip Collins (per-field SQL functions)
           Eric Kolve (hashref "AND" support)
           Mike Fragassi (enhancements to "BETWEEN" and "LIKE")
           Dan Kubb (support for "quote_char" and "name_sep")
           Guillermo Roditi (patch to cleanup "IN" and "BETWEEN", fix and tests for _order_by)
           Laurent Dami (internal refactoring, extensible list of special operators, literal SQL)
           Norbert Buchmuller (support for literal SQL in hashpair, misc. fixes & tests)
           Peter Rabbitson (rewrite of SQLA::Test, misc. fixes & tests)
           Oliver Charles (support for "RETURNING" after "INSERT")

       Thanks!

SEE ALSO

       SQL::Abstract, DBIx::Class, DBIx::Abstract, CGI::FormBuilder, HTML::QuickTable.

AUTHOR

       Copyright (c) 2001-2007 Nathan Wiger <nwiger@cpan.org>. All Rights Reserved.

LICENSE

       This module is free software; you may copy this under the same terms as perl itself
       (either the GNU General Public License or the Artistic License)