Provided by: libvm-ec2-perl_1.28-4_all bug

NAME

       VM::EC2::Image - Object describing an Amazon Machine Image (AMI)

SYNOPSIS

         use VM::EC2;

         $ec2     = VM::EC2->new(...);
         $image   = $ec2->describe_images(-image_id=>'ami-12345');

         $state   = $image->imageState;
         $owner   = $image->imageOwnerId;
         $rootdev = $image->rootDeviceName;
         @devices = $image->blockDeviceMapping;
         $tags    = $image->tags;

         @instances = $image->run_instances(-min_count=>10);

DESCRIPTION

       This object represents an Amazon Machine Image (AMI), and is returned by
       VM::EC2->describe_images(). In addition to methods to query the image's attributes, the
       run_instances() method allows you to launch and configure EC2 instances based on the AMI.

METHODS

       These object methods are supported:

        imageId       -- AMI ID
        imageLocation -- Location of the AMI
        imageState    -- Current state of the AMI. One of "available",
                         "pending" or "failed". Only "available" AMIs
                         can be launched.
        imageOwnerId  -- AWS account ID of the image owner.
        isPublic      -- Returns true if this image has public launch
                         permissions. Note that this is a Perl boolean,
                         and not the string "true".
        productCodes  -- A list of product codes associated with the image.
        architecture  -- The architecture of the image.
        imageType     -- The image type (machine, kernel or RAM disk).
        kernelId      -- The kernel associated with the image.
        ramdiskId     -- The RAM disk associated with the image.
        platform      -- "Windows" for Windows AMIs, otherwise undef.
        sriovNetSupport -- Specifies whether enhanced networking is enabled.
                           "simple" if enabled.
        stateReason   -- Explanation of a "failed" imageState. This is
                         a VM::EC2::Instance::State::Reason
                         object.
        imageOwnerAlias -The AWS account alias (e.g. "self") or AWS
                         account ID that owns the AMI.
        name          -- Name of the AMI provided during image creation.
        description   -- Description of the AMI provided during image
                         creation.
        rootDeviceType -- The root device type. One of "ebs" or
                         "instance-store".
        rootDeviceName -- Name of the root device, e.g. "/dev/sda1"
        blockDeviceMapping -- List of block devices attached to this
                          image. Each element is a
                          VM::EC2::BlockDevice.
        virtualizationType -- One of "paravirtual" or "hvm".
        hypervisor     -- One of "ovm" or "xen"

       In addition, the object supports the tags() method described in VM::EC2::Generic:

        print "ready for production\n" if $image->tags->{Released};

   @instances = $image->run_instances(%args)
       The run_instance() method will launch one or more instances based on this AMI. The method
       takes all the arguments recognized by VM::EC2->run_instances(), except for the -image_id
       argument. The method returns a list of VM::EC2::Instance objects, which you may monitor
       periodically until they are up and running.

       All arguments are optional. See run_instances() in VM::EC2 for more information.

         -min_count         Minimum number of instances to launch [1]
         -max_count         Maximum number of instances to launch [1]
         -key_name          Name of the keypair to use
         -security_group_id Security group ID to use for this instance.
                            Use an arrayref for multiple group IDs
         -security_group    Security group name to use for this instance.
                            Use an arrayref for multiple values.
         -user_data         User data to pass to the instances. Do NOT base64
                            encode this. It will be done for you.
         -instance_type     Type of the instance to use. See below for a
                            list.
         -placement_zone    The availability zone you want to launch the
                            instance into. Call $ec2->regions for a list.
         -placement_group   An existing placement group to launch the
                            instance into. Applicable to cluster instances
                            only.
         -placement_tenancy Specify 'dedicated' to launch the instance on a
                            dedicated server. Only applicable for VPC
                            instances.
         -kernel_id         ID of the kernel to use for the instances,
                            overriding the kernel specified in the image.
         -ramdisk_id        ID of the ramdisk to use for the instances,
                            overriding the ramdisk specified in the image.
         -block_devices     Specify block devices to map onto the instances,
                            overriding the values specified in the image.
                            This can be a scalar string or an arrayref for
                            multiple mappings:
                            Example:
                            ['/dev/sdb=ephemeral0','/dev/sdc=snap-12345:80:false']
         -monitoring        Pass a true value to enable detailed monitoring.
         -subnet_id         ID of the subnet to launch the instance
                            into. Only applicable for VPC instances.
         -termination_protection  Pass true to lock the instance so that it
                            cannot be terminated using the API. Use
                            modify_instance() to unset this if youu wish to
                            terminate the instance later.
         -disable_api_termination -- Same as above.
         -shutdown_behavior Pass "stop" (the default) to stop the instance
                            and save its disk state when "shutdown" is called
                            from within the instance. Stopped instances can
                            be restarted later. Pass "terminate" to
                            instead terminate the instance and discard its
                            state completely.
         -instance_initiated_shutdown_behavior -- Same as above.
         -private_ip_address Assign the instance to a specific IP address
                            from a VPC subnet (VPC only).
         -client_token      Unique identifier that you can provide to ensure
                            idempotency of the request. You can use
                            $ec2->token() to generate a suitable identifier.
                            See http://docs.amazonwebservices.com/AWSEC2/
                                latest/UserGuide/Run_Instance_Idempotency.html

       Note that after launching an instance, you may need to wait a few seconds before adding
       tags to it or performing other operations.

       See VM::EC2 for details.

   $boolean = $image->make_public($public)
       Change the isPublic flag. Provide a true value to make the image public, a false one to
       make it private.

   $state  = $image->current_status
       Refreshes the object and then calls imageState() to return one of "pending", "available"
       or "failed." You can use this to monitor an image_creation process in progress.

   @user_ids = $image->launchPermissions
       Returns a list of user IDs with launch permission for this image. Note that the AWS API
       calls this "launchPermission", but this module makes it plural to emphasize that the
       result is a list.

   @user_ids = $image->authorized_users
       The same as launchPermissions.

   $boolean = $image->add_authorized_users($id1,$id2,...)
   $boolean = $image->remove_authorized_users($id1,$id2,...)
       These methods add and remove user accounts which have launch permissions for the image.
       The result code indicates whether the list of user IDs were successfully added or removed.

   $boolean = $image->add_authorized_users($id1,$id2,...)
   $boolean = $image->remove_authorized_users($id1,$id2,...)
   $boolean = $image->reset_authorized_users
       These methods add and remove user accounts which have launch permissions for the image.
       The result code indicates whether the list of user IDs were successfully added or removed.

       reset_authorized_users() resets the list users authored to launch instances from this
       image to empty, effectively granting launch privileges to the owner only.

       See also authorized_users().

   $copy = $image->copy(-region => $region, -name => $name, -description => $desc)
       Copies the image to another region.

       Required arguments:

        -region           The region to copy to

       Optional arguments:

        -name             The name of the image.

        -description      The description of the image.

        -client_token     Unique identifier to ensure idempotency of the request

   $image->refresh
       This method will refresh the object from AWS, updating all values to their current ones.
       You can call it after tagging or otherwise changing image attributes.

STRING OVERLOADING

       When used in a string context, this object will interpolate the imageId.

SEE ALSO

       VM::EC2 VM::EC2::Generic VM::EC2::BlockDevice VM::EC2::StateReason VM::EC2::Instance
       VM::EC2::Tag

AUTHOR

       Lincoln Stein <lincoln.stein@gmail.com>.

       Copyright (c) 2011 Ontario Institute for Cancer Research

       This package and its accompanying libraries is free software; you can redistribute it
       and/or modify it under the terms of the GPL (either version 1, or at your option, any
       later version) or the Artistic License 2.0.  Refer to LICENSE for the full license text.
       In addition, please see DISCLAIMER.txt for disclaimers of warranty.