Provided by: libatf-dev_0.21-6build4_amd64 bug

NAME

     atf-c, ATF_CHECK, ATF_CHECK_MSG, ATF_CHECK_EQ, ATF_CHECK_EQ_MSG, ATF_CHECK_MATCH,
     ATF_CHECK_MATCH_MSG, ATF_CHECK_STREQ, ATF_CHECK_STREQ_MSG, ATF_CHECK_ERRNO, ATF_REQUIRE,
     ATF_REQUIRE_MSG, ATF_REQUIRE_EQ, ATF_REQUIRE_EQ_MSG, ATF_REQUIRE_MATCH,
     ATF_REQUIRE_MATCH_MSG, ATF_REQUIRE_STREQ, ATF_REQUIRE_STREQ_MSG, ATF_REQUIRE_ERRNO, ATF_TC,
     ATF_TC_BODY, ATF_TC_BODY_NAME, ATF_TC_CLEANUP, ATF_TC_CLEANUP_NAME, ATF_TC_HEAD,
     ATF_TC_HEAD_NAME, ATF_TC_NAME, ATF_TC_WITH_CLEANUP, ATF_TC_WITHOUT_HEAD, ATF_TP_ADD_TC,
     ATF_TP_ADD_TCS, atf_tc_get_config_var, atf_tc_get_config_var_wd,
     atf_tc_get_config_var_as_bool, atf_tc_get_config_var_as_bool_wd,
     atf_tc_get_config_var_as_long, atf_tc_get_config_var_as_long_wd, atf_no_error,
     atf_tc_expect_death, atf_tc_expect_exit, atf_tc_expect_fail, atf_tc_expect_pass,
     atf_tc_expect_signal, atf_tc_expect_timeout, atf_tc_fail, atf_tc_fail_nonfatal, atf_tc_pass,
     atf_tc_skip, atf_utils_cat_file, atf_utils_compare_file, atf_utils_copy_file,
     atf_utils_create_file, atf_utils_file_exists, atf_utils_fork, atf_utils_free_charpp,
     atf_utils_grep_file, atf_utils_grep_string, atf_utils_readline, atf_utils_redirect,
     atf_utils_wait — C API to write ATF-based test programs

SYNOPSIS

     #include <atf-c.h>

     ATF_CHECK(expression);

     ATF_CHECK_MSG(expression, fail_msg_fmt, ...);

     ATF_CHECK_EQ(expected_expression, actual_expression);

     ATF_CHECK_EQ_MSG(expected_expression, actual_expression, fail_msg_fmt, ...);

     ATF_CHECK_MATCH(regexp, string);

     ATF_CHECK_MATCH_MSG(regexp, string, fail_msg_fmt, ...);

     ATF_CHECK_STREQ(string_1, string_2);

     ATF_CHECK_STREQ_MSG(string_1, string_2, fail_msg_fmt, ...);

     ATF_CHECK_ERRNO(expected_errno, bool_expression);

     ATF_REQUIRE(expression);

     ATF_REQUIRE_MSG(expression, fail_msg_fmt, ...);

     ATF_REQUIRE_EQ(expected_expression, actual_expression);

     ATF_REQUIRE_EQ_MSG(expected_expression, actual_expression, fail_msg_fmt, ...);

     ATF_REQUIRE_MATCH(regexp, string);

     ATF_REQUIRE_MATCH_MSG(regexp, string, fail_msg_fmt, ...);

     ATF_REQUIRE_STREQ(expected_string, actual_string);

     ATF_REQUIRE_STREQ_MSG(expected_string, actual_string, fail_msg_fmt, ...);

     ATF_REQUIRE_ERRNO(expected_errno, bool_expression);

     ATF_TC(name);

     ATF_TC_BODY(name, tc);

     ATF_TC_BODY_NAME(name);

     ATF_TC_CLEANUP(name, tc);

     ATF_TC_CLEANUP_NAME(name);

     ATF_TC_HEAD(name, tc);

     ATF_TC_HEAD_NAME(name);

     ATF_TC_NAME(name);

     ATF_TC_WITH_CLEANUP(name);

     ATF_TC_WITHOUT_HEAD(name);

     ATF_TP_ADD_TC(tp_name, tc_name);

     ATF_TP_ADD_TCS(tp_name);

     atf_tc_get_config_var(tc, varname);

     atf_tc_get_config_var_wd(tc, variable_name, default_value);

     atf_tc_get_config_var_as_bool(tc, variable_name);

     atf_tc_get_config_var_as_bool_wd(tc, variable_name, default_value);

     atf_tc_get_config_var_as_long(tc, variable_name);

     atf_tc_get_config_var_as_long_wd(tc, variable_name, default_value);

     atf_no_error();

     atf_tc_expect_death(reason, ...);

     atf_tc_expect_exit(exitcode, reason, ...);

     atf_tc_expect_fail(reason, ...);

     atf_tc_expect_pass();

     atf_tc_expect_signal(signo, reason, ...);

     atf_tc_expect_timeout(reason, ...);

     atf_tc_fail(reason);

     atf_tc_fail_nonfatal(reason);

     atf_tc_pass();

     atf_tc_skip(reason);

     void
     atf_utils_cat_file(const char *file, const char *prefix);

     bool
     atf_utils_compare_file(const char *file, const char *contents);

     void
     atf_utils_copy_file(const char *source, const char *destination);

     void
     atf_utils_create_file(const char *file, const char *contents, ...);

     void
     atf_utils_file_exists(const char *file);

     pid_t
     atf_utils_fork(void);

     void
     atf_utils_free_charpp(char **argv);

     bool
     atf_utils_grep_file(const char *regexp, const char *file, ...);

     bool
     atf_utils_grep_string(const char *regexp, const char *str, ...);

     char *
     atf_utils_readline(int fd);

     void
     atf_utils_redirect(const int fd, const char *file);

     void
     atf_utils_wait(const pid_t pid, const int expected_exit_status, const char *expected_stdout,
         const char *expected_stderr);

DESCRIPTION

     ATF provides a C programming interface to implement test programs.  C-based test programs
     follow this template:

           ... C-specific includes go here ...

           #include <atf-c.h>

           ATF_TC(tc1);
           ATF_TC_HEAD(tc1, tc)
           {
               ... first test case's header ...
           }
           ATF_TC_BODY(tc1, tc)
           {
               ... first test case's body ...
           }

           ATF_TC_WITH_CLEANUP(tc2);
           ATF_TC_HEAD(tc2, tc)
           {
               ... second test case's header ...
           }
           ATF_TC_BODY(tc2, tc)
           {
               ... second test case's body ...
           }
           ATF_TC_CLEANUP(tc2, tc)
           {
               ... second test case's cleanup ...
           }

           ATF_TC_WITHOUT_HEAD(tc3);
           ATF_TC_BODY(tc3, tc)
           {
               ... third test case's body ...
           }

           ... additional test cases ...

           ATF_TP_ADD_TCS(tp)
           {
               ATF_TP_ADD_TC(tcs, tc1);
               ATF_TP_ADD_TC(tcs, tc2);
               ATF_TP_ADD_TC(tcs, tc3);
               ... add additional test cases ...

               return atf_no_error();
           }

   Definition of test cases
     Test cases have an identifier and are composed of three different parts: the header, the
     body and an optional cleanup routine, all of which are described in atf-test-case(4).  To
     define test cases, one can use the ATF_TC(), ATF_TC_WITH_CLEANUP() or the
     ATF_TC_WITHOUT_HEAD() macros, which take a single parameter specifiying the test case's
     name.  ATF_TC(), requires to define a head and a body for the test case,
     ATF_TC_WITH_CLEANUP() requires to define a head, a body and a cleanup for the test case and
     ATF_TC_WITHOUT_HEAD() requires only a body for the test case.  It is important to note that
     these do not set the test case up for execution when the program is run.  In order to do so,
     a later registration is needed with the ATF_TP_ADD_TC() macro detailed in Program
     initialization.

     Later on, one must define the three parts of the body by means of three functions.  Their
     headers are given by the ATF_TC_HEAD(), ATF_TC_BODY() and ATF_TC_CLEANUP() macros, all of
     which take the test case name provided to the ATF_TC() ATF_TC_WITH_CLEANUP(), or
     ATF_TC_WITHOUT_HEAD() macros and the name of the variable that will hold a pointer to the
     test case data.  Following each of these, a block of code is expected, surrounded by the
     opening and closing brackets.

   Program initialization
     The library provides a way to easily define the test program's main() function.  You should
     never define one on your own, but rely on the library to do it for you.  This is done by
     using the ATF_TP_ADD_TCS() macro, which is passed the name of the object that will hold the
     test cases; i.e. the test program instance.  This name can be whatever you want as long as
     it is a valid variable identifier.

     After the macro, you are supposed to provide the body of a function, which should only use
     the ATF_TP_ADD_TC() macro to register the test cases the test program will execute and
     return a success error code.  The first parameter of this macro matches the name you
     provided in the former call.  The success status can be returned using the atf_no_error()
     function.

   Header definitions
     The test case's header can define the meta-data by using the atf_tc_set_md_var() method,
     which takes three parameters: the first one points to the test case data, the second one
     specifies the meta-data variable to be set and the third one specifies its value.  Both of
     them are strings.

   Configuration variables
     The test case has read-only access to the current configuration variables by means of the
     bool atf_tc_has_config_var(), const char * atf_tc_get_config_var(), const char *
     atf_tc_get_config_var_wd(), bool atf_tc_get_config_var_as_bool(), bool
     atf_tc_get_config_var_as_bool_wd(), long atf_tc_get_config_var_as_long(), and the long
     atf_tc_get_config_var_as_long_wd() functions, which can be called in any of the three parts
     of a test case.

     The ‘_wd’ variants take a default value for the variable which is returned if the variable
     is not defined.  The other functions without the ‘_wd’ suffix require the variable to be
     defined.

   Access to the source directory
     It is possible to get the path to the test case's source directory from any of its three
     components by querying the ‘srcdir’ configuration variable.

   Requiring programs
     Aside from the require.progs meta-data variable available in the header only, one can also
     check for additional programs in the test case's body by using the atf_tc_require_prog()
     function, which takes the base name or full path of a single binary.  Relative paths are
     forbidden.  If it is not found, the test case will be automatically skipped.

   Test case finalization
     The test case finalizes either when the body reaches its end, at which point the test is
     assumed to have passed, unless any non-fatal errors were raised using
     atf_tc_fail_nonfatal(), or at any explicit call to atf_tc_pass(), atf_tc_fail() or
     atf_tc_skip().  These three functions terminate the execution of the test case immediately.
     The cleanup routine will be processed afterwards in a completely automated way, regardless
     of the test case's termination reason.

     atf_tc_pass() does not take any parameters.  atf_tc_fail(), atf_tc_fail_nonfatal() and
     atf_tc_skip() take a format string and a variable list of parameters, which describe, in a
     user-friendly manner, why the test case failed or was skipped, respectively.  It is very
     important to provide a clear error message in both cases so that the user can quickly know
     why the test did not pass.

   Expectations
     Everything explained in the previous section changes when the test case expectations are
     redefined by the programmer.

     Each test case has an internal state called ‘expect’ that describes what the test case
     expectations are at any point in time.  The value of this property can change during
     execution by any of:

     atf_tc_expect_death(reason, ...)
             Expects the test case to exit prematurely regardless of the nature of the exit.

     atf_tc_expect_exit(exitcode, reason, ...)
             Expects the test case to exit cleanly.  If exitcode is not ‘-1’, the runtime engine
             will validate that the exit code of the test case matches the one provided in this
             call.  Otherwise, the exact value will be ignored.

     atf_tc_expect_fail(reason, ...)
             Any failure (be it fatal or non-fatal) raised in this mode is recorded.  However,
             such failures do not report the test case as failed; instead, the test case
             finalizes cleanly and is reported as ‘expected failure’; this report includes the
             provided reason as part of it.  If no error is raised while running in this mode,
             then the test case is reported as ‘failed’.

             This mode is useful to reproduce actual known bugs in tests.  Whenever the developer
             fixes the bug later on, the test case will start reporting a failure, signaling the
             developer that the test case must be adjusted to the new conditions.  In this
             situation, it is useful, for example, to set reason as the bug number for tracking
             purposes.

     atf_tc_expect_pass()
             This is the normal mode of execution.  In this mode, any failure is reported as such
             to the user and the test case is marked as ‘failed’.

     atf_tc_expect_signal(signo, reason, ...)
             Expects the test case to terminate due to the reception of a signal.  If signo is
             not ‘-1’, the runtime engine will validate that the signal that terminated the test
             case matches the one provided in this call.  Otherwise, the exact value will be
             ignored.

     atf_tc_expect_timeout(reason, ...)
             Expects the test case to execute for longer than its timeout.

   Helper macros for common checks
     The library provides several macros that are very handy in multiple situations.  These
     basically check some condition after executing a given statement or processing a given
     expression and, if the condition is not met, they report the test case as failed.

     The ‘REQUIRE’ variant of the macros immediately abort the test case as soon as an error
     condition is detected by calling the atf_tc_fail() function.  Use this variant whenever it
     makes no sense to continue the execution of a test case when the checked condition is not
     met.  The ‘CHECK’ variant, on the other hand, reports a failure as soon as it is encountered
     using the atf_tc_fail_nonfatal() function, but the execution of the test case continues as
     if nothing had happened.  Use this variant whenever the checked condition is important as a
     result of the test case, but there are other conditions that can be subsequently checked on
     the same run without aborting.

     Additionally, the ‘MSG’ variants take an extra set of parameters to explicitly specify the
     failure message.  This failure message is formatted according to the printf(3) formatters.

     ATF_CHECK(), ATF_CHECK_MSG(), ATF_REQUIRE() and ATF_REQUIRE_MSG() take an expression and
     fail if the expression evaluates to false.

     ATF_CHECK_EQ(), ATF_CHECK_EQ_MSG(), ATF_REQUIRE_EQ() and ATF_REQUIRE_EQ_MSG() take two
     expressions and fail if the two evaluated values are not equal.  The common style is to put
     the expected value in the first parameter and the actual value in the second parameter.

     ATF_CHECK_MATCH(), ATF_CHECK_MATCH_MSG(), ATF_REQUIRE_MATCH() and ATF_REQUIRE_MATCH_MSG()
     take a regular expression and a string and fail if the regular expression does not match the
     given string.  Note that the regular expression is not anchored, so it will match anywhere
     in the string.

     ATF_CHECK_STREQ(), ATF_CHECK_STREQ_MSG(), ATF_REQUIRE_STREQ() and ATF_REQUIRE_STREQ_MSG()
     take two strings and fail if the two are not equal character by character.  The common style
     is to put the expected string in the first parameter and the actual string in the second
     parameter.

     ATF_CHECK_ERRNO() and ATF_REQUIRE_ERRNO() take, first, the error code that the check is
     expecting to find in the errno variable and, second, a boolean expression that, if evaluates
     to true, means that a call failed and errno has to be checked against the first value.

   Utility functions
     The following functions are provided as part of the atf-c API to simplify the creation of a
     variety of tests.  In particular, these are useful to write tests for command-line
     interfaces.

     void atf_utils_cat_file(const char *file, const char *prefix)

           Prints the contents of file to the standard output, prefixing every line with the
           string in prefix.

     bool atf_utils_compare_file(const char *file, const char *contents)

           Returns true if the given file matches exactly the expected inlined contents.

     void atf_utils_copy_file(const char *source, const char *destination)

           Copies the file source to destination.  The permissions of the file are preserved
           during the code.

     void atf_utils_create_file(const char *file, const char *contents, ...)

           Creates file with the text given in contents, which is a formatting string that uses
           the rest of the variable arguments.

     void atf_utils_file_exists(const char *file)

           Checks if file exists.

     pid_t atf_utils_fork(void)

           Forks a process and redirects the standard output and standard error of the child to
           files for later validation with atf_utils_wait().  Fails the test case if the fork
           fails, so this does not return an error.

     void atf_utils_free_charpp(char **argv)

           Frees a dynamically-allocated array of dynamically-allocated strings.

     bool atf_utils_grep_file(const char *regexp, const char *file, ...)

           Searches for the regexp, which is a formatting string representing the regular
           expression, in the file.  The variable arguments are used to construct the regular
           expression.

     bool atf_utils_grep_string(const char *regexp, const char *str, ...)

           Searches for the regexp, which is a formatting string representing the regular
           expression, in the literal string str.  The variable arguments are used to construct
           the regular expression.

     char * atf_utils_readline(int fd)

           Reads a line from the file descriptor fd.  The line, if any, is returned as a
           dynamically-allocated buffer that must be released with free(3).  If there was nothing
           to read, returns ‘NULL’.

     void atf_utils_redirect(const int fd, const char *file)

           Redirects the given file descriptor fd to file.  This function exits the process in
           case of an error and does not properly mark the test case as failed.  As a result, it
           should only be used in subprocesses of the test case; specially those spawned by
           atf_utils_fork().

     void atf_utils_wait(const pid_t pid, const int expected_exit_status,
     const char *expected_stdout, const char *expected_stderr)

           Waits and validates the result of a subprocess spawned with atf_utils_wait().  The
           validation involves checking that the subprocess exited cleanly and returned the code
           specified in expected_exit_status and that its standard output and standard error
           match the strings given in expected_stdout and expected_stderr.

           If any of the expected_stdout or expected_stderr strings are prefixed with ‘save:’,
           then they specify the name of the file into which to store the stdout or stderr of the
           subprocess, and no comparison is performed.

ENVIRONMENT

     The following variables are recognized by atf-c but should not be overridden other than for
     testing purposes:

     ATF_BUILD_CC          Path to the C compiler.
     ATF_BUILD_CFLAGS      C compiler flags.
     ATF_BUILD_CPP         Path to the C/C++ preprocessor.
     ATF_BUILD_CPPFLAGS    C/C++ preprocessor flags.
     ATF_BUILD_CXX         Path to the C++ compiler.
     ATF_BUILD_CXXFLAGS    C++ compiler flags.

EXAMPLES

     The following shows a complete test program with a single test case that validates the
     addition operator:

           #include <atf-c.h>

           ATF_TC(addition);
           ATF_TC_HEAD(addition, tc)
           {
               atf_tc_set_md_var(tc, "descr",
                                 "Sample tests for the addition operator");
           }
           ATF_TC_BODY(addition, tc)
           {
               ATF_CHECK_EQ(0, 0 + 0);
               ATF_CHECK_EQ(1, 0 + 1);
               ATF_CHECK_EQ(1, 1 + 0);

               ATF_CHECK_EQ(2, 1 + 1);

               ATF_CHECK_EQ(300, 100 + 200);
           }

           ATF_TC(string_formatting);
           ATF_TC_HEAD(string_formatting, tc)
           {
               atf_tc_set_md_var(tc, "descr",
                                 "Sample tests for the snprintf");
           }
           ATF_TC_BODY(string_formatting, tc)
           {
               char buf[1024];
               snprintf(buf, sizeof(buf), "a %s", "string");
               ATF_CHECK_STREQ_MSG("a string", buf, "%s is not working");
           }

           ATF_TC(open_failure);
           ATF_TC_HEAD(open_failure, tc)
           {
               atf_tc_set_md_var(tc, "descr",
                                 "Sample tests for the open function");
           }
           ATF_TC_BODY(open_failure, tc)
           {
               ATF_CHECK_ERRNO(ENOENT, open("non-existent", O_RDONLY) == -1);
           }

           ATF_TC(known_bug);
           ATF_TC_HEAD(known_bug, tc)
           {
               atf_tc_set_md_var(tc, "descr",
                                 "Reproduces a known bug");
           }
           ATF_TC_BODY(known_bug, tc)
           {
               atf_tc_expect_fail("See bug number foo/bar");
               ATF_CHECK_EQ(3, 1 + 1);
               atf_tc_expect_pass();
               ATF_CHECK_EQ(3, 1 + 2);
           }

           ATF_TP_ADD_TCS(tp)
           {
               ATF_TP_ADD_TC(tp, addition);
               ATF_TP_ADD_TC(tp, string_formatting);
               ATF_TP_ADD_TC(tp, open_failure);
               ATF_TP_ADD_TC(tp, known_bug);

               return atf_no_error();
           }

SEE ALSO

     atf-test-program(1), atf-test-case(4)