Provided by: liblapack-doc_3.12.0-3build1_all 
NAME
geesx - geesx: Schur form, expert
SYNOPSIS
Functions
subroutine cgeesx (jobvs, sort, select, sense, n, a, lda, sdim, w, vs, ldvs, rconde,
rcondv, work, lwork, rwork, bwork, info)
CGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
subroutine dgeesx (jobvs, sort, select, sense, n, a, lda, sdim, wr, wi, vs, ldvs, rconde,
rcondv, work, lwork, iwork, liwork, bwork, info)
DGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
subroutine sgeesx (jobvs, sort, select, sense, n, a, lda, sdim, wr, wi, vs, ldvs, rconde,
rcondv, work, lwork, iwork, liwork, bwork, info)
SGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
subroutine zgeesx (jobvs, sort, select, sense, n, a, lda, sdim, w, vs, ldvs, rconde,
rcondv, work, lwork, rwork, bwork, info)
ZGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
Detailed Description
Function Documentation
subroutine cgeesx (character jobvs, character sort, external select, character sense, integer
n, complex, dimension( lda, * ) a, integer lda, integer sdim, complex, dimension( * ) w,
complex, dimension( ldvs, * ) vs, integer ldvs, real rconde, real rcondv, complex,
dimension( * ) work, integer lwork, real, dimension( * ) rwork, logical, dimension( * )
bwork, integer info)
CGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
Purpose:
CGEESX computes for an N-by-N complex nonsymmetric matrix A, the
eigenvalues, the Schur form T, and, optionally, the matrix of Schur
vectors Z. This gives the Schur factorization A = Z*T*(Z**H).
Optionally, it also orders the eigenvalues on the diagonal of the
Schur form so that selected eigenvalues are at the top left;
computes a reciprocal condition number for the average of the
selected eigenvalues (RCONDE); and computes a reciprocal condition
number for the right invariant subspace corresponding to the
selected eigenvalues (RCONDV). The leading columns of Z form an
orthonormal basis for this invariant subspace.
For further explanation of the reciprocal condition numbers RCONDE
and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where
these quantities are called s and sep respectively).
A complex matrix is in Schur form if it is upper triangular.
Parameters
JOBVS
JOBVS is CHARACTER*1
= 'N': Schur vectors are not computed;
= 'V': Schur vectors are computed.
SORT
SORT is CHARACTER*1
Specifies whether or not to order the eigenvalues on the
diagonal of the Schur form.
= 'N': Eigenvalues are not ordered;
= 'S': Eigenvalues are ordered (see SELECT).
SELECT
SELECT is a LOGICAL FUNCTION of one COMPLEX argument
SELECT must be declared EXTERNAL in the calling subroutine.
If SORT = 'S', SELECT is used to select eigenvalues to order
to the top left of the Schur form.
If SORT = 'N', SELECT is not referenced.
An eigenvalue W(j) is selected if SELECT(W(j)) is true.
SENSE
SENSE is CHARACTER*1
Determines which reciprocal condition numbers are computed.
= 'N': None are computed;
= 'E': Computed for average of selected eigenvalues only;
= 'V': Computed for selected right invariant subspace only;
= 'B': Computed for both.
If SENSE = 'E', 'V' or 'B', SORT must equal 'S'.
N
N is INTEGER
The order of the matrix A. N >= 0.
A
A is COMPLEX array, dimension (LDA, N)
On entry, the N-by-N matrix A.
On exit, A is overwritten by its Schur form T.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
SDIM
SDIM is INTEGER
If SORT = 'N', SDIM = 0.
If SORT = 'S', SDIM = number of eigenvalues for which
SELECT is true.
W
W is COMPLEX array, dimension (N)
W contains the computed eigenvalues, in the same order
that they appear on the diagonal of the output Schur form T.
VS
VS is COMPLEX array, dimension (LDVS,N)
If JOBVS = 'V', VS contains the unitary matrix Z of Schur
vectors.
If JOBVS = 'N', VS is not referenced.
LDVS
LDVS is INTEGER
The leading dimension of the array VS. LDVS >= 1, and if
JOBVS = 'V', LDVS >= N.
RCONDE
RCONDE is REAL
If SENSE = 'E' or 'B', RCONDE contains the reciprocal
condition number for the average of the selected eigenvalues.
Not referenced if SENSE = 'N' or 'V'.
RCONDV
RCONDV is REAL
If SENSE = 'V' or 'B', RCONDV contains the reciprocal
condition number for the selected right invariant subspace.
Not referenced if SENSE = 'N' or 'E'.
WORK
WORK is COMPLEX array, dimension (MAX(1,LWORK))
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK. LWORK >= max(1,2*N).
Also, if SENSE = 'E' or 'V' or 'B', LWORK >= 2*SDIM*(N-SDIM),
where SDIM is the number of selected eigenvalues computed by
this routine. Note that 2*SDIM*(N-SDIM) <= N*N/2. Note also
that an error is only returned if LWORK < max(1,2*N), but if
SENSE = 'E' or 'V' or 'B' this may not be large enough.
For good performance, LWORK must generally be larger.
If LWORK = -1, then a workspace query is assumed; the routine
only calculates upper bound on the optimal size of the
array WORK, returns this value as the first entry of the WORK
array, and no error message related to LWORK is issued by
XERBLA.
RWORK
RWORK is REAL array, dimension (N)
BWORK
BWORK is LOGICAL array, dimension (N)
Not referenced if SORT = 'N'.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value.
> 0: if INFO = i, and i is
<= N: the QR algorithm failed to compute all the
eigenvalues; elements 1:ILO-1 and i+1:N of W
contain those eigenvalues which have converged; if
JOBVS = 'V', VS contains the transformation which
reduces A to its partially converged Schur form.
= N+1: the eigenvalues could not be reordered because some
eigenvalues were too close to separate (the problem
is very ill-conditioned);
= N+2: after reordering, roundoff changed values of some
complex eigenvalues so that leading eigenvalues in
the Schur form no longer satisfy SELECT=.TRUE. This
could also be caused by underflow due to scaling.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine dgeesx (character jobvs, character sort, external select, character sense, integer
n, double precision, dimension( lda, * ) a, integer lda, integer sdim, double precision,
dimension( * ) wr, double precision, dimension( * ) wi, double precision, dimension( ldvs,
* ) vs, integer ldvs, double precision rconde, double precision rcondv, double precision,
dimension( * ) work, integer lwork, integer, dimension( * ) iwork, integer liwork,
logical, dimension( * ) bwork, integer info)
DGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
Purpose:
DGEESX computes for an N-by-N real nonsymmetric matrix A, the
eigenvalues, the real Schur form T, and, optionally, the matrix of
Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**T).
Optionally, it also orders the eigenvalues on the diagonal of the
real Schur form so that selected eigenvalues are at the top left;
computes a reciprocal condition number for the average of the
selected eigenvalues (RCONDE); and computes a reciprocal condition
number for the right invariant subspace corresponding to the
selected eigenvalues (RCONDV). The leading columns of Z form an
orthonormal basis for this invariant subspace.
For further explanation of the reciprocal condition numbers RCONDE
and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where
these quantities are called s and sep respectively).
A real matrix is in real Schur form if it is upper quasi-triangular
with 1-by-1 and 2-by-2 blocks. 2-by-2 blocks will be standardized in
the form
[ a b ]
[ c a ]
where b*c < 0. The eigenvalues of such a block are a +- sqrt(bc).
Parameters
JOBVS
JOBVS is CHARACTER*1
= 'N': Schur vectors are not computed;
= 'V': Schur vectors are computed.
SORT
SORT is CHARACTER*1
Specifies whether or not to order the eigenvalues on the
diagonal of the Schur form.
= 'N': Eigenvalues are not ordered;
= 'S': Eigenvalues are ordered (see SELECT).
SELECT
SELECT is a LOGICAL FUNCTION of two DOUBLE PRECISION arguments
SELECT must be declared EXTERNAL in the calling subroutine.
If SORT = 'S', SELECT is used to select eigenvalues to sort
to the top left of the Schur form.
If SORT = 'N', SELECT is not referenced.
An eigenvalue WR(j)+sqrt(-1)*WI(j) is selected if
SELECT(WR(j),WI(j)) is true; i.e., if either one of a
complex conjugate pair of eigenvalues is selected, then both
are. Note that a selected complex eigenvalue may no longer
satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since
ordering may change the value of complex eigenvalues
(especially if the eigenvalue is ill-conditioned); in this
case INFO may be set to N+3 (see INFO below).
SENSE
SENSE is CHARACTER*1
Determines which reciprocal condition numbers are computed.
= 'N': None are computed;
= 'E': Computed for average of selected eigenvalues only;
= 'V': Computed for selected right invariant subspace only;
= 'B': Computed for both.
If SENSE = 'E', 'V' or 'B', SORT must equal 'S'.
N
N is INTEGER
The order of the matrix A. N >= 0.
A
A is DOUBLE PRECISION array, dimension (LDA, N)
On entry, the N-by-N matrix A.
On exit, A is overwritten by its real Schur form T.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
SDIM
SDIM is INTEGER
If SORT = 'N', SDIM = 0.
If SORT = 'S', SDIM = number of eigenvalues (after sorting)
for which SELECT is true. (Complex conjugate
pairs for which SELECT is true for either
eigenvalue count as 2.)
WR
WR is DOUBLE PRECISION array, dimension (N)
WI
WI is DOUBLE PRECISION array, dimension (N)
WR and WI contain the real and imaginary parts, respectively,
of the computed eigenvalues, in the same order that they
appear on the diagonal of the output Schur form T. Complex
conjugate pairs of eigenvalues appear consecutively with the
eigenvalue having the positive imaginary part first.
VS
VS is DOUBLE PRECISION array, dimension (LDVS,N)
If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur
vectors.
If JOBVS = 'N', VS is not referenced.
LDVS
LDVS is INTEGER
The leading dimension of the array VS. LDVS >= 1, and if
JOBVS = 'V', LDVS >= N.
RCONDE
RCONDE is DOUBLE PRECISION
If SENSE = 'E' or 'B', RCONDE contains the reciprocal
condition number for the average of the selected eigenvalues.
Not referenced if SENSE = 'N' or 'V'.
RCONDV
RCONDV is DOUBLE PRECISION
If SENSE = 'V' or 'B', RCONDV contains the reciprocal
condition number for the selected right invariant subspace.
Not referenced if SENSE = 'N' or 'E'.
WORK
WORK is DOUBLE PRECISION array, dimension (MAX(1,LWORK))
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK. LWORK >= max(1,3*N).
Also, if SENSE = 'E' or 'V' or 'B',
LWORK >= N+2*SDIM*(N-SDIM), where SDIM is the number of
selected eigenvalues computed by this routine. Note that
N+2*SDIM*(N-SDIM) <= N+N*N/2. Note also that an error is only
returned if LWORK < max(1,3*N), but if SENSE = 'E' or 'V' or
'B' this may not be large enough.
For good performance, LWORK must generally be larger.
If LWORK = -1, then a workspace query is assumed; the routine
only calculates upper bounds on the optimal sizes of the
arrays WORK and IWORK, returns these values as the first
entries of the WORK and IWORK arrays, and no error messages
related to LWORK or LIWORK are issued by XERBLA.
IWORK
IWORK is INTEGER array, dimension (MAX(1,LIWORK))
On exit, if INFO = 0, IWORK(1) returns the optimal LIWORK.
LIWORK
LIWORK is INTEGER
The dimension of the array IWORK.
LIWORK >= 1; if SENSE = 'V' or 'B', LIWORK >= SDIM*(N-SDIM).
Note that SDIM*(N-SDIM) <= N*N/4. Note also that an error is
only returned if LIWORK < 1, but if SENSE = 'V' or 'B' this
may not be large enough.
If LIWORK = -1, then a workspace query is assumed; the
routine only calculates upper bounds on the optimal sizes of
the arrays WORK and IWORK, returns these values as the first
entries of the WORK and IWORK arrays, and no error messages
related to LWORK or LIWORK are issued by XERBLA.
BWORK
BWORK is LOGICAL array, dimension (N)
Not referenced if SORT = 'N'.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value.
> 0: if INFO = i, and i is
<= N: the QR algorithm failed to compute all the
eigenvalues; elements 1:ILO-1 and i+1:N of WR and WI
contain those eigenvalues which have converged; if
JOBVS = 'V', VS contains the transformation which
reduces A to its partially converged Schur form.
= N+1: the eigenvalues could not be reordered because some
eigenvalues were too close to separate (the problem
is very ill-conditioned);
= N+2: after reordering, roundoff changed values of some
complex eigenvalues so that leading eigenvalues in
the Schur form no longer satisfy SELECT=.TRUE. This
could also be caused by underflow due to scaling.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine sgeesx (character jobvs, character sort, external select, character sense, integer
n, real, dimension( lda, * ) a, integer lda, integer sdim, real, dimension( * ) wr, real,
dimension( * ) wi, real, dimension( ldvs, * ) vs, integer ldvs, real rconde, real rcondv,
real, dimension( * ) work, integer lwork, integer, dimension( * ) iwork, integer liwork,
logical, dimension( * ) bwork, integer info)
SGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
Purpose:
SGEESX computes for an N-by-N real nonsymmetric matrix A, the
eigenvalues, the real Schur form T, and, optionally, the matrix of
Schur vectors Z. This gives the Schur factorization A = Z*T*(Z**T).
Optionally, it also orders the eigenvalues on the diagonal of the
real Schur form so that selected eigenvalues are at the top left;
computes a reciprocal condition number for the average of the
selected eigenvalues (RCONDE); and computes a reciprocal condition
number for the right invariant subspace corresponding to the
selected eigenvalues (RCONDV). The leading columns of Z form an
orthonormal basis for this invariant subspace.
For further explanation of the reciprocal condition numbers RCONDE
and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where
these quantities are called s and sep respectively).
A real matrix is in real Schur form if it is upper quasi-triangular
with 1-by-1 and 2-by-2 blocks. 2-by-2 blocks will be standardized in
the form
[ a b ]
[ c a ]
where b*c < 0. The eigenvalues of such a block are a +- sqrt(bc).
Parameters
JOBVS
JOBVS is CHARACTER*1
= 'N': Schur vectors are not computed;
= 'V': Schur vectors are computed.
SORT
SORT is CHARACTER*1
Specifies whether or not to order the eigenvalues on the
diagonal of the Schur form.
= 'N': Eigenvalues are not ordered;
= 'S': Eigenvalues are ordered (see SELECT).
SELECT
SELECT is a LOGICAL FUNCTION of two REAL arguments
SELECT must be declared EXTERNAL in the calling subroutine.
If SORT = 'S', SELECT is used to select eigenvalues to sort
to the top left of the Schur form.
If SORT = 'N', SELECT is not referenced.
An eigenvalue WR(j)+sqrt(-1)*WI(j) is selected if
SELECT(WR(j),WI(j)) is true; i.e., if either one of a
complex conjugate pair of eigenvalues is selected, then both
are. Note that a selected complex eigenvalue may no longer
satisfy SELECT(WR(j),WI(j)) = .TRUE. after ordering, since
ordering may change the value of complex eigenvalues
(especially if the eigenvalue is ill-conditioned); in this
case INFO may be set to N+3 (see INFO below).
SENSE
SENSE is CHARACTER*1
Determines which reciprocal condition numbers are computed.
= 'N': None are computed;
= 'E': Computed for average of selected eigenvalues only;
= 'V': Computed for selected right invariant subspace only;
= 'B': Computed for both.
If SENSE = 'E', 'V' or 'B', SORT must equal 'S'.
N
N is INTEGER
The order of the matrix A. N >= 0.
A
A is REAL array, dimension (LDA, N)
On entry, the N-by-N matrix A.
On exit, A is overwritten by its real Schur form T.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
SDIM
SDIM is INTEGER
If SORT = 'N', SDIM = 0.
If SORT = 'S', SDIM = number of eigenvalues (after sorting)
for which SELECT is true. (Complex conjugate
pairs for which SELECT is true for either
eigenvalue count as 2.)
WR
WR is REAL array, dimension (N)
WI
WI is REAL array, dimension (N)
WR and WI contain the real and imaginary parts, respectively,
of the computed eigenvalues, in the same order that they
appear on the diagonal of the output Schur form T. Complex
conjugate pairs of eigenvalues appear consecutively with the
eigenvalue having the positive imaginary part first.
VS
VS is REAL array, dimension (LDVS,N)
If JOBVS = 'V', VS contains the orthogonal matrix Z of Schur
vectors.
If JOBVS = 'N', VS is not referenced.
LDVS
LDVS is INTEGER
The leading dimension of the array VS. LDVS >= 1, and if
JOBVS = 'V', LDVS >= N.
RCONDE
RCONDE is REAL
If SENSE = 'E' or 'B', RCONDE contains the reciprocal
condition number for the average of the selected eigenvalues.
Not referenced if SENSE = 'N' or 'V'.
RCONDV
RCONDV is REAL
If SENSE = 'V' or 'B', RCONDV contains the reciprocal
condition number for the selected right invariant subspace.
Not referenced if SENSE = 'N' or 'E'.
WORK
WORK is REAL array, dimension (MAX(1,LWORK))
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK. LWORK >= max(1,3*N).
Also, if SENSE = 'E' or 'V' or 'B',
LWORK >= N+2*SDIM*(N-SDIM), where SDIM is the number of
selected eigenvalues computed by this routine. Note that
N+2*SDIM*(N-SDIM) <= N+N*N/2. Note also that an error is only
returned if LWORK < max(1,3*N), but if SENSE = 'E' or 'V' or
'B' this may not be large enough.
For good performance, LWORK must generally be larger.
If LWORK = -1, then a workspace query is assumed; the routine
only calculates upper bounds on the optimal sizes of the
arrays WORK and IWORK, returns these values as the first
entries of the WORK and IWORK arrays, and no error messages
related to LWORK or LIWORK are issued by XERBLA.
IWORK
IWORK is INTEGER array, dimension (MAX(1,LIWORK))
On exit, if INFO = 0, IWORK(1) returns the optimal LIWORK.
LIWORK
LIWORK is INTEGER
The dimension of the array IWORK.
LIWORK >= 1; if SENSE = 'V' or 'B', LIWORK >= SDIM*(N-SDIM).
Note that SDIM*(N-SDIM) <= N*N/4. Note also that an error is
only returned if LIWORK < 1, but if SENSE = 'V' or 'B' this
may not be large enough.
If LIWORK = -1, then a workspace query is assumed; the
routine only calculates upper bounds on the optimal sizes of
the arrays WORK and IWORK, returns these values as the first
entries of the WORK and IWORK arrays, and no error messages
related to LWORK or LIWORK are issued by XERBLA.
BWORK
BWORK is LOGICAL array, dimension (N)
Not referenced if SORT = 'N'.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value.
> 0: if INFO = i, and i is
<= N: the QR algorithm failed to compute all the
eigenvalues; elements 1:ILO-1 and i+1:N of WR and WI
contain those eigenvalues which have converged; if
JOBVS = 'V', VS contains the transformation which
reduces A to its partially converged Schur form.
= N+1: the eigenvalues could not be reordered because some
eigenvalues were too close to separate (the problem
is very ill-conditioned);
= N+2: after reordering, roundoff changed values of some
complex eigenvalues so that leading eigenvalues in
the Schur form no longer satisfy SELECT=.TRUE. This
could also be caused by underflow due to scaling.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
subroutine zgeesx (character jobvs, character sort, external select, character sense, integer
n, complex*16, dimension( lda, * ) a, integer lda, integer sdim, complex*16, dimension( *
) w, complex*16, dimension( ldvs, * ) vs, integer ldvs, double precision rconde, double
precision rcondv, complex*16, dimension( * ) work, integer lwork, double precision,
dimension( * ) rwork, logical, dimension( * ) bwork, integer info)
ZGEESX computes the eigenvalues, the Schur form, and, optionally, the matrix of Schur
vectors for GE matrices
Purpose:
ZGEESX computes for an N-by-N complex nonsymmetric matrix A, the
eigenvalues, the Schur form T, and, optionally, the matrix of Schur
vectors Z. This gives the Schur factorization A = Z*T*(Z**H).
Optionally, it also orders the eigenvalues on the diagonal of the
Schur form so that selected eigenvalues are at the top left;
computes a reciprocal condition number for the average of the
selected eigenvalues (RCONDE); and computes a reciprocal condition
number for the right invariant subspace corresponding to the
selected eigenvalues (RCONDV). The leading columns of Z form an
orthonormal basis for this invariant subspace.
For further explanation of the reciprocal condition numbers RCONDE
and RCONDV, see Section 4.10 of the LAPACK Users' Guide (where
these quantities are called s and sep respectively).
A complex matrix is in Schur form if it is upper triangular.
Parameters
JOBVS
JOBVS is CHARACTER*1
= 'N': Schur vectors are not computed;
= 'V': Schur vectors are computed.
SORT
SORT is CHARACTER*1
Specifies whether or not to order the eigenvalues on the
diagonal of the Schur form.
= 'N': Eigenvalues are not ordered;
= 'S': Eigenvalues are ordered (see SELECT).
SELECT
SELECT is a LOGICAL FUNCTION of one COMPLEX*16 argument
SELECT must be declared EXTERNAL in the calling subroutine.
If SORT = 'S', SELECT is used to select eigenvalues to order
to the top left of the Schur form.
If SORT = 'N', SELECT is not referenced.
An eigenvalue W(j) is selected if SELECT(W(j)) is true.
SENSE
SENSE is CHARACTER*1
Determines which reciprocal condition numbers are computed.
= 'N': None are computed;
= 'E': Computed for average of selected eigenvalues only;
= 'V': Computed for selected right invariant subspace only;
= 'B': Computed for both.
If SENSE = 'E', 'V' or 'B', SORT must equal 'S'.
N
N is INTEGER
The order of the matrix A. N >= 0.
A
A is COMPLEX*16 array, dimension (LDA, N)
On entry, the N-by-N matrix A.
On exit, A is overwritten by its Schur form T.
LDA
LDA is INTEGER
The leading dimension of the array A. LDA >= max(1,N).
SDIM
SDIM is INTEGER
If SORT = 'N', SDIM = 0.
If SORT = 'S', SDIM = number of eigenvalues for which
SELECT is true.
W
W is COMPLEX*16 array, dimension (N)
W contains the computed eigenvalues, in the same order
that they appear on the diagonal of the output Schur form T.
VS
VS is COMPLEX*16 array, dimension (LDVS,N)
If JOBVS = 'V', VS contains the unitary matrix Z of Schur
vectors.
If JOBVS = 'N', VS is not referenced.
LDVS
LDVS is INTEGER
The leading dimension of the array VS. LDVS >= 1, and if
JOBVS = 'V', LDVS >= N.
RCONDE
RCONDE is DOUBLE PRECISION
If SENSE = 'E' or 'B', RCONDE contains the reciprocal
condition number for the average of the selected eigenvalues.
Not referenced if SENSE = 'N' or 'V'.
RCONDV
RCONDV is DOUBLE PRECISION
If SENSE = 'V' or 'B', RCONDV contains the reciprocal
condition number for the selected right invariant subspace.
Not referenced if SENSE = 'N' or 'E'.
WORK
WORK is COMPLEX*16 array, dimension (MAX(1,LWORK))
On exit, if INFO = 0, WORK(1) returns the optimal LWORK.
LWORK
LWORK is INTEGER
The dimension of the array WORK. LWORK >= max(1,2*N).
Also, if SENSE = 'E' or 'V' or 'B', LWORK >= 2*SDIM*(N-SDIM),
where SDIM is the number of selected eigenvalues computed by
this routine. Note that 2*SDIM*(N-SDIM) <= N*N/2. Note also
that an error is only returned if LWORK < max(1,2*N), but if
SENSE = 'E' or 'V' or 'B' this may not be large enough.
For good performance, LWORK must generally be larger.
If LWORK = -1, then a workspace query is assumed; the routine
only calculates upper bound on the optimal size of the
array WORK, returns this value as the first entry of the WORK
array, and no error message related to LWORK is issued by
XERBLA.
RWORK
RWORK is DOUBLE PRECISION array, dimension (N)
BWORK
BWORK is LOGICAL array, dimension (N)
Not referenced if SORT = 'N'.
INFO
INFO is INTEGER
= 0: successful exit
< 0: if INFO = -i, the i-th argument had an illegal value.
> 0: if INFO = i, and i is
<= N: the QR algorithm failed to compute all the
eigenvalues; elements 1:ILO-1 and i+1:N of W
contain those eigenvalues which have converged; if
JOBVS = 'V', VS contains the transformation which
reduces A to its partially converged Schur form.
= N+1: the eigenvalues could not be reordered because some
eigenvalues were too close to separate (the problem
is very ill-conditioned);
= N+2: after reordering, roundoff changed values of some
complex eigenvalues so that leading eigenvalues in
the Schur form no longer satisfy SELECT=.TRUE. This
could also be caused by underflow due to scaling.
Author
Univ. of Tennessee
Univ. of California Berkeley
Univ. of Colorado Denver
NAG Ltd.
Author
Generated automatically by Doxygen for LAPACK from the source code.