Provided by: libieee1284-3-dev_0.2.11-14.1build1_amd64 bug

NAME

       ieee1284_nibble_read, ieee1284_compat_write, ieee1284_byte_read, ieee1284_epp_read_data,
       ieee1284_epp_write_data, ieee1284_epp_read_addr, ieee1284_epp_write_addr,
       ieee1284_ecp_read_data, ieee1284_ecp_write_data, ieee1284_ecp_read_addr,
       ieee1284_ecp_write_addr - data transfer functions

SYNOPSIS

       #include <ieee1284.h>

       ssize_t ieee1284_nibble_read(struct parport *port, int flags, char *buffer, size_t len);

       ssize_t ieee1284_compat_write(struct parport *port, int flags, const char *buffer,
                                     size_t len);

       ssize_t ieee1284_byte_read(struct parport *port, int flags, char *buffer, size_t len);

       ssize_t ieee1284_epp_read_data(struct parport *port, int flags, char *buffer, size_t len);

       ssize_t ieee1284_epp_write_data(struct parport *port, int flags, const char *buffer,
                                       size_t len);

       ssize_t ieee1284_epp_read_addr(struct parport *port, int flags, char *buffer, size_t len);

       ssize_t ieee1284_epp_write_addr(struct parport *port, int flags, const char *buffer,
                                       size_t len);

       ssize_t ieee1284_ecp_read_data(struct parport *port, int flags, char *buffer, size_t len);

       ssize_t ieee1284_ecp_write_data(struct parport *port, int flags, const char *buffer,
                                       size_t len);

       ssize_t ieee1284_ecp_read_addr(struct parport *port, int flags, char *buffer, size_t len);

       ssize_t ieee1284_ecp_write_addr(struct parport *port, int flags, const char *buffer,
                                       size_t len);

DESCRIPTION

       This set of functions is for tranferring bytes in the relevant transfer mode. For ECP and
       EPP modes two types of transfer are possible: data and address (usually referred to as
       channel in ECP).

       The supplied port must be a claimed port.

       The supplied buffer must be at least len bytes long. When reading, the transferred data is
       stored in the buffer; when writing the data to be transferred is taken from the buffer.

       For reads (peripheral to host): if no data is available and F1284_NONBLOCK is not in
       effect, the inactivity timer is started. If data becomes available before the inactivity
       time-out elapses it is read; otherwise the return value will be E1284_TIMEDOUT.

       For writes (host to peripheral): if the peripheral is not willing to accept data and
       F1284_NONBLOCK is not in effect, the inactivity timer is started. If the peripheral
       indicates that it is willing to accept data before the inactivity time-out elapses it is
       sent; otherwise the return value will be E1284_TIMEDOUT

       The flags may alter the behaviour slightly:

       F1284_NONBLOCK
           For reads (peripheral to host): if no data is available, return immediately (with
           E1284_TIMEDOUT).

           For writes (host to peripheral): if the peripheral is not willing to accept data,
           return immediately (with E1284_TIMEDOUT).

       F1284_SWE
           Don't use hardware assistance for the transfer, but instead set the parallel port pins
           according to the wire protocol.

       F1284_RLE (for ECP only)
           Use run length encoding. If the peripheral is in ECP mode with RLE, calls to
           ieee1284_ecp_read_data must set this flag in order for the RLE from the peripheral to
           be interpreted correctly, and calls to ieee1284_ecp_write_data may set this flag in
           order to take advantage of RLE.

       F1284_FASTEPP (for EPP only)
           Use multi-byte transfers. Several bytes at a time are transferred using hardware
           assistance, if supporting hardware is present. The price of this increased speed is
           that the return value will be less reliable when this flag is used.

       For ECP mode, a given direction is in force at any particular time, and it is up to the
       application to ensure that it is only writing when in forward mode, and reading when in
       reverse mode.

RETURN VALUE

       The return value is the number of bytes successfully transferred or, if negative, one of:

       E1284_NOTIMPL
           This transfer mode and flags combination is not yet implemented in libieee1284.

       E1284_TIMEDOUT
           Timed out waiting for peripheral to handshake.

       E1284_NOMEM
           Not enough memory is available.

       E1284_SYS
           There was a problem at the operating system level. The global variable errno has been
           set appropriately.

       E1284_INVALIDPORT
           The port parameter is invalid (for instance, perhaps the port is not claimed).

       If any bytes are successfully transferred, that number is returned. An error is returned
       only if no bytes are transferred.

       For host-to-peripheral transfers, all data is at the peripheral by the time the call
       returns.

SEE ALSO

       ieee1284_ecp_fwd_to_rev(3)

AUTHOR

       Tim Waugh <twaugh@redhat.com>
           Author.

COPYRIGHT

       Copyright © 2001-2003 Tim Waugh

                                            09/18/2007                       IEEE1284_TRANSFER(3)