Provided by: libncarg-dev_6.6.2.dfsg.1-4_amd64 bug

NAME

       MAPBLA - Adds to the area map in the array IAMA the set of boundary lines, of projected
       geographical entities, determined by the current state of the internal parameters of
       EZMAP.  Note that this routine uses whichever old outline dataset is selected by the value
       of the internal parameter 'OU'; to access the new map database "Earth..1", which was
       created in 1998, one must call instead the EZMAPB routine MPLNAM.

SYNOPSIS

       CALL MAPBLA (IAMA)

C-BINDING SYNOPSIS

       #include <ncarg/ncargC.h>

       void c_mapbla (int *iama)

DESCRIPTION

       IAMA        (an input/output array of type INTEGER) is the area map array to which
                   boundary lines are to be added.

C-BINDING DESCRIPTION

       The C-binding argument description is the same as the FORTRAN argument description.

USAGE

       One or two groups of boundary lines are added to the area map by a call to MAPBLA. The
       first group has the group identifier 'G1', which has a default value of 1. The group 'G1'
       consists of a perimeter (either rectangular or elliptical, depending on the value of the
       EZMAP parameter 'EL') and the set of projected boundary lines implied by your selection of
       an EZMAP dataset (some combination of continental, U.S. state, and international political
       outlines).  For certain projections a limb line may also be included. (The limb is the
       boundary between a projectable region and an unprojectable one.)

       If the EZMAP parameter 'VS' has a value greater than zero, a second group, with the group
       identifier 'G2', is added to the area map. (The default value of 'VS' is 1; the default
       value of 'G2' is 2.) The purpose of the group 'G2' is to split up areas and thus reduce
       the number of points required to define a typical area. This may be necessary because some
       hardware devices fail if the number of points defining an area is too large. The group
       'G2' consists of a copy of the perimeter and the limb line (if any), plus a set of
       vertical lines that split the area inside the perimeter into 'VS' vertical strips.

       The perimeter and the limb in the groups 'G1' and 'G2' have the following left and right
       area identifiers:

           0   Identifies the area inside the perimeter or limb.

           -1  Identifies the area outside the perimeter or limb.

       The vertical lines in the group 'G2' have left and right area identifiers of 0.

       To set the values of 'G1', 'G2', and 'VS', call the EZMAP routine MAPSTI. To get the
       current values of 'G1', 'G2', and 'VS', call the EZMAP routine MAPGTI. See the man pages
       for MAPSTI and MAPGTI.

EXAMPLES

       Use the ncargex command to see the following relevant examples: ccppole, colcon, cmpfil,
       cmpgrp, cmpita, cmpitm, cmplab, cmpmsk, cmptit, cpex08, eezmpa, tezmpa, fcover, ffex00.

ACCESS

       To use MAPBLA or c_mapbla, load the NCAR Graphics libraries ncarg, ncarg_gks, and ncarg_c,
       preferably in that order.

SEE ALSO

       Online: ezmap, ezmap_params, mapaci, mapblm, mapdrw, mapeod, mapfst, mapgci, mapgrd,
       mapgrm, mapgtc, mapgti, mapgtl, mapgtr, mapint, mapiq, mapiqa, mapiqd, mapiqm, mapit,
       mapita, mapitd, mapitm, maplbl, maplmb, maplot, mappos, maproj, maprs, maprst, mapsav,
       mapset, mapstc, mapsti, mapstl, mapstr, maptra, maptri, maptrn, mapusr, mapvec, mpchln,
       mpfnme, mpgetc, mpgeti, mpgetl, mpgetr, mpglty, mpiaty, mpifnb, mpilnb, mpiola, mpiosa,
       mpipai, mpipan, mpipar, mpisci, mplnam, mplndm, mplndr, mplnri, mpname, mprset, mpsetc,
       mpseti, mpsetl, mpsetr, supmap, supcon, ncarg_cbind

       Hardcopy: NCAR Graphics Contouring and Mapping Tutorial

COPYRIGHT

       Copyright (C) 1987-2009
       University Corporation for Atmospheric Research
       The use of this Software is governed by a License Agreement.