Provided by: xserver-xorg-video-radeon_22.0.0-1build1_amd64 bug

NAME

       radeon - ATI/AMD RADEON video driver

SYNOPSIS

       Section "Device"
         Identifier "devname"
         Driver "radeon"
         ...
       EndSection

DESCRIPTION

       radeon is an Xorg driver for ATI/AMD RADEON-based video cards with the following features:

       • Full  support  for  8-,  15-, 16- and 24-bit pixel depths, and for 30-bit depth on Linux
         3.16 and later;
       • RandR 1.2 and RandR 1.3 support;
       • Full EXA 2D acceleration;
       • Textured XVideo acceleration including  anti-tearing  support  (Bicubic  filtering  only
         available on R/RV3xx, R/RV/RS4xx, R/RV5xx, and RS6xx/RS740);
       • 3D acceleration;

SUPPORTED HARDWARE

       The  radeon  driver supports PCI, AGP, and PCIe video cards based on the following ATI/AMD
       chips (note: list is non-exhaustive):

       R100        Radeon 7200
       RV100       Radeon 7000(VE), M6, RN50/ES1000
       RS100       Radeon IGP320(M)
       RV200       Radeon 7500, M7, FireGL 7800
       RS200       Radeon IGP330(M)/IGP340(M)
       RS250       Radeon Mobility 7000 IGP
       R200        Radeon 8500, 9100, FireGL 8800/8700
       RV250       Radeon 9000PRO/9000, M9
       RV280       Radeon 9200PRO/9200/9200SE/9250, M9+
       RS300       Radeon 9100 IGP
       RS350       Radeon 9200 IGP
       RS400/RS480 Radeon XPRESS 200(M)/1100 IGP
       R300        Radeon 9700PRO/9700/9500PRO/9500/9600TX, FireGL X1/Z1
       R350        Radeon 9800PRO/9800SE/9800, FireGL X2
       R360        Radeon 9800XT
       RV350       Radeon 9600PRO/9600SE/9600/9550, M10/M11, FireGL T2
       RV360       Radeon 9600XT
       RV370       Radeon X300, M22
       RV380       Radeon X600, M24
       RV410       Radeon X700, M26 PCIe
       R420        Radeon X800 AGP
       R423/R430   Radeon X800, M28 PCIe
       R480/R481   Radeon X850 PCIe/AGP
       RV505/RV515/RV516/RV550
                   Radeon X1300/X1400/X1500/X1550/X2300
       R520        Radeon X1800
       RV530/RV560 Radeon X1600/X1650/X1700
       RV570/R580  Radeon X1900/X1950
       RS600/RS690/RS740
                   Radeon X1200/X1250/X2100
       R600        Radeon HD 2900
       RV610/RV630 Radeon HD 2400/2600/2700/4200/4225/4250
       RV620/RV635 Radeon HD 3410/3430/3450/3470/3650/3670
       RV670       Radeon HD 3690/3850/3870
       RS780/RS880 Radeon HD 3100/3200/3300/4100/4200/4250/4290
       RV710/RV730 Radeon HD 4330/4350/4550/4650/4670/5145/5165/530v/545v/560v/565v
       RV740/RV770/RV790
                   Radeon HD 4770/4730/4830/4850/4860/4870/4890
       CEDAR       Radeon HD 5430/5450/6330/6350/6370
       REDWOOD     Radeon HD 5550/5570/5650/5670/5730/5750/5770/6530/6550/6570
       JUNIPER     Radeon HD 5750/5770/5830/5850/5870/6750/6770/6830/6850/6870
       CYPRESS     Radeon HD 5830/5850/5870
       HEMLOCK     Radeon HD 5970
       PALM        Radeon HD 6310/6250
       SUMO/SUMO2  Radeon HD 6370/6380/6410/6480/6520/6530/6550/6620
       BARTS       Radeon HD 6790/6850/6870/6950/6970/6990
       TURKS       Radeon HD 6570/6630/6650/6670/6730/6750/6770
       CAICOS      Radeon HD 6430/6450/6470/6490
       CAYMAN      Radeon HD 6950/6970/6990
       ARUBA       Radeon HD 7000 series
       TAHITI      Radeon HD 7900 series
       PITCAIRN    Radeon HD 7800 series
       VERDE       Radeon HD 7700 series
       OLAND       Radeon HD 8000 series
       HAINAN      Radeon HD 8000 series
       BONAIRE     Radeon HD 7790 series
       KAVERI      KAVERI APUs
       KABINI      KABINI APUs
       HAWAII      Radeon R9 series
       MULLINS     MULLINS APUs

CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration details.  This section only  covers
       configuration details specific to this driver.

       The following driver Options are supported:

       Option "SWcursor" "boolean"
              Selects software cursor.  The default is off.

       Option "Accel" "boolean"
              Enables or disables all hardware acceleration.
              The default is on.

       Option "ZaphodHeads" "string"
              Specify  the  RandR  output(s)  to  use  with  zaphod  mode for a particular driver
              instance.  If you use this option you must use this option for all instances of the
              driver.
              For  example: Option "ZaphodHeads" "LVDS,VGA-0" will assign xrandr outputs LVDS and
              VGA-0 to this instance of the driver.

       Option "ColorTiling" "boolean"
              The framebuffer can be addressed either in linear or tiled  mode.  Tiled  mode  can
              provide  significant  performance  benefits  with  3D applications.  Tiling will be
              disabled if the drm module is too old or if the current display configuration  does
              not support it.  On R600+ this enables 1D tiling mode.
              The  default  value  is  on  for  R/RV3XX, R/RV4XX, R/RV5XX, RS6XX, RS740, R/RV6XX,
              R/RV7XX, RS780, RS880, EVERGREEN, CAYMAN, ARUBA, Southern Islands, and Sea  Islands
              and  off  for  R/RV/RS1XX,  R/RV/RS2XX,  RS3XX,  and RS690/RS780/RS880 when fast fb
              feature is enabled.

       Option "ColorTiling2D" "boolean"
              The framebuffer can be addressed either in linear, 1D, or 2D tiled modes. 2D  tiled
              mode   can  provide  significant  performance  benefits  over  1D  tiling  with  3D
              applications.  Tiling will be disabled if the drm module  is  too  old  or  if  the
              current  display  configuration  does  not  support  it.  KMS ColorTiling2D is only
              supported on R600 and newer chips and requires Mesa 9.0 or  newer  for  R6xx-ARUBA,
              Mesa 9.2 or newer for Southern Islands, and Mesa 10.1 or newer for Sea Islands.
              The  default  value  is  on  for R/RV6XX, R/RV7XX, RS780, RS880, EVERGREEN, CAYMAN,
              ARUBA, Southern Islands, and Sea Islands.

       Option "DRI" "integer"
              Define the maximum level of DRI to enable. Valid values are 2 for  DRI2  or  3  for
              DRI3.   The  default  is  3 for DRI3 if the Xorg version is >= 1.18.3 and glamor is
              enabled, otherwise 2 for DRI2. Note: DRI3 may not work correctly in all cases  with
              EXA, enable at your own risk.

       Option "EnablePageFlip" "boolean"
              Enable  DRI2  page  flipping.  The default is on.  Pageflipping is supported on all
              radeon hardware.

       Option "TearFree" "boolean"
              Set the default value of the per-output 'TearFree' property, which controls tearing
              prevention  using the hardware page flipping mechanism. TearFree is on for any CRTC
              associated with one or more outputs with TearFree on. Two separate scanout  buffers
              need  to  be  allocated  for each CRTC with TearFree on. If this option is set, the
              default value of the property is 'on' or 'off' accordingly. If  this  option  isn't
              set, the default value of the property is auto, which means that TearFree is on for
              rotated outputs, outputs with RandR transforms applied and for RandR 1.4  secondary
              outputs, otherwise off.

       Option "AccelMethod" "string"
              Chooses  between  available  acceleration architectures.  Valid values are EXA (for
              pre-TAHITI GPUs) and glamor (for R300 or higher). The default is glamor  with  R600
              or newer (with Xorg >= 1.18.3, otherwise with TAHITI or newer), otherwise EXA.

       The following driver Options are supported for glamor :

       Option "ShadowPrimary" "boolean"
              This  option  enables  a  so-called  "shadow primary" buffer for fast CPU access to
              pixel data, and separate scanout buffers for each display controller (CRTC).   This
              may  improve performance for some 2D workloads, potentially at the expense of other
              (e.g. 3D, video) workloads.  Note in particular that enabling this option currently
              disables page flipping.  The default is off.

       The following driver Options are supported for EXA :

       Option "EXAVSync" "boolean"
              This  option  attempts  to  avoid  tearing by stalling the engine until the display
              controller has passed the destination region.  It reduces tearing at  the  cost  of
              performance  and has been known to cause instability on some chips.  The default is
              off.

       Option "EXAPixmaps" "boolean"
              Under KMS, to avoid thrashing pixmaps in/out of VRAM on low memory cards, we use  a
              heuristic  based  on  VRAM amount to determine whether to allow EXA to use VRAM for
              non-essential pixmaps.  This option allows  us  to  override  the  heuristic.   The
              default  is on with > 32MB VRAM, off with < 32MB or when fast fb feature is enabled
              for RS690/RS780/RS880.

       Option "SwapbuffersWait" "boolean"
              This option controls the behavior of glXSwapBuffers and glXCopySubBufferMESA  calls
              by  GL  applications.   If enabled, the calls will avoid tearing by making sure the
              display scanline is outside of the area to be copied before the  copy  occurs.   If
              disabled,  no  scanline  synchronization  is performed, meaning tearing will likely
              occur.  Note that when enabled, this option can adversely affect the  framerate  of
              applications that render frames at less than refresh rate.

              The default value is on.

TEXTURED VIDEO ATTRIBUTES

       The  driver  supports the following X11 Xv attributes for Textured Video.  You can use the
       "xvattr" tool to query/set those attributes at runtime.

       XV_VSYNC
              XV_VSYNC is used to control whether textured adapter synchronizes the screen update
              to  the monitor vertical refresh to eliminate tearing.  It has two values: 'off'(0)
              and 'on'(1). The default is 'on'(1).

       XV_CRTC
              XV_CRTC is used to control which display controller  (crtc)  the  textured  adapter
              synchronizes  the  screen  update  with  when  XV_VSYNC  is  enabled.  The default,
              'auto'(-1), will sync to the display controller that more of the video is on;  when
              this  is ambiguous, the display controller associated with the RandR primary output
              is preferred.  This attribute is useful for things like clone mode where  the  user
              can best decide which display should be synced.  The default is 'auto'(-1).

       XV_BICUBIC
              XV_BICUBIC  is  used  to  control  whether  textured adapter should apply a bicubic
              filter to smooth the output. It has three values: 'off'(0), 'on'(1) and  'auto'(2).
              'off'  means  never apply the filter, 'on' means always apply the filter and 'auto'
              means apply the filter only if the X and Y sizes are scaled to more than double  to
              avoid  blurred output.  Bicubic filtering is not currently compatible with other Xv
              attributes like hue, contrast, and brightness, and must be disabled  to  use  those
              attributes.  The default is 'off'(0).

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7)

        1. Wiki page:
           https://www.x.org/wiki/radeon

        2. Overview about radeon development code:
           https://cgit.freedesktop.org/xorg/driver/xf86-video-ati/

        3. Mailing list:
           https://lists.freedesktop.org/mailman/listinfo/amd-gfx

        4. IRC channel:
           #radeon on irc.freenode.net

        5. Query the bugtracker for radeon bugs:
           https://bugs.freedesktop.org/query.cgi?product=xorg&component=Driver/Radeon

        6. Submit bugs & patches:
           https://bugs.freedesktop.org/enter_bug.cgi?product=xorg&component=Driver/Radeon

AUTHORS

       Authors include:
       Rickard E. (Rik) Faith   faith@precisioninsight.com
       Kevin E. Martin          kem@freedesktop.org
       Alan Hourihane           alanh@fairlite.demon.co.uk
       Marc Aurele La France    tsi@xfree86.org
       Benjamin Herrenschmidt   benh@kernel.crashing.org
       Michel Dänzer            michel@daenzer.net
       Alex Deucher             alexdeucher@gmail.com
       Bogdan D.                bogdand@users.sourceforge.net
       Eric Anholt              eric@anholt.net