Provided by: gammu_1.42.0-8.1ubuntu2_amd64 bug

NAME

       gammurc - gammu(1) configuration file

SYNOPSIS

       On  Linux,  MacOS  X,  BSD  and  other  Unix-like  systems, the config file is searched in
       following order:

       1. $XDG_CONFIG_HOME/gammu/config

       2. ~/.config/gammu/config

       3. ~/.gammurc

       4. /etc/gammurc

       On Microsoft Windows:

       1. %PROFILE%\Application Data\gammurc

       2. .\gammurc

DESCRIPTION

       Gammu requires configuration to be able to properly  talk  to  your  phone.   gammu  reads
       configuration  from  a  config file. It's location is determined on runtime, see above for
       search paths.

       You can use gammu-config or gammu-detect to generate  configuration  file  or  start  from
       Fully documented example.

       For   hints  about  configuring  your  phone,  you  can  check  Gammu  Phone  Database  <‐
       https://wammu.eu/phones/> to see what user users experienced.

       This file use ini file syntax, see ini.

       Configuration file for gammu can contain several sections - [gammu],  [gammu1],  [gammuN],
       ...  Each  section  configures one connection setup and in default mode gammu tries all of
       them in numerical order. You can also specify which configuration section to use by giving
       it's  number ([gammu] has number 0) as a parameter to gammu and it will then use only this
       section.

       [gammu]

       This section is read by default unless you specify other on command line.

   Device connection parameters
       Connection
              Protocol which will be used to talk to your phone.

              For Nokia cables you want to use one of following:

              fbus   serial FBUS connection

              dlr3   DLR-3 and compatible cables

              dku2   DKU-2 and compatible cables

              dku5   DKU-5 and compatible cables

              mbus   serial MBUS connection

              If you use some non original cable, you  might  need  to  append  -nodtr  (eg.  for
              ARK3116  based  cables)  or  -nopower,  but  Gammu  should  be  able to detect this
              automatically.

              For non-Nokia phones connected using cable you generally want:

              at     generic AT commands based connection

              You can optionally specify speed of the connection, eg.  at19200,  but  it  is  not
              needed for modern USB cables.

              For IrDA connections use one of following:

              irdaphonet
                     Phonet connection for Nokia phones.

              irdaat AT commands connection for most of phones (this is not supported on Linux).

              irdaobex
                     OBEX (IrMC or file transfer) connection for most of phones.

              irdagnapbus
                     GNapplet based connection for Symbian phones, see gnapplet.

              For Bluetooth connection use one of following:

              bluephonet
                     Phonet connection for Nokia phones.

              bluefbus
                     FBUS connection for Nokia phones.

              blueat AT commands connection for most of phones.

              blueobex
                     OBEX (IrMC or file transfer) connection for most of phones.

              bluerfgnapbus
                     GNapplet based connection for Symbian phones, see gnapplet.

              blues60
                     Connection to Series60 applet in S60 phones, see s60.

                     New in version 1.29.90.

              New in version 1.36.7: Gammu now supports connecting using proxy command.

              You  can  also  proxy  the connection using shell command, for example to different
              host. This can be done using proxy connections:

              proxyphonet
                     Phonet connection for Nokia phones.

              proxyfbus
                     FBUS connection for Nokia phones.

              proxyat
                     AT commands connection for most of phones.

              proxyobex
                     OBEX (IrMC or file transfer) connection for most of phones.

              proxygnapbus
                     GNapplet based connection for Symbian phones, see gnapplet.

              proxys60
                     Connection to Series60 applet in S60 phones, see s60.

              SEE ALSO:
                 faq-config

       Device New in version 1.27.95.

              Device node or address of phone. It depends on used connection.

              For cables or emulated serial ports, you enter device name (for example /dev/ttyS0,
              /dev/ttyACM0,  /dev/ircomm0,  /dev/rfcomm0 on Linux, /dev/cuad0 on FreeBSD or COM1:
              on Windows). The special exception are DKU-2 and DKU-5 cables on Windows, where the
              device  is  automatically  detected  from driver information and this parameters is
              ignored.

              NOTE:
                 Some USB modems expose several interfaces, in such cases Gammu works  best  with
                 "User"      one,     you     can     find     more     information     on     <‐
                 http://www.dd-wrt.com/wiki/index.php/Mobile_Broadband>.

              For USB connections (currently only fbususb and dku2 on Linux), you can specify  to
              which USB device Gammu should connect. You can either provide vendor/product IDs or
              device address on USB:

                 Device = 0x1234:0x5678  # Match device by vendor and product id
                 Device = 0x1234:-1      # Match device by vendor id
                 Device = 1.10           # Match device by usb bus and device address
                 Device = 10             # Match device by usb device address
                 Device = serial:123456  # Match device by serial string

              NOTE:
                 On Linux systems, you might lack permissions for some device nodes.   You  might
                 need  to be member of some group (eg. plugdev or dialout) or or add special udev
                 rules to enable you access these devices as non-root.

                 For Nokia phones you can put  following  file  (also  available  in  sources  as
                 contrib/udev/69-gammu-acl.rules) as /etc/udev/rules.d/69-gammu-acl.rules:

                     #
                     # udev rule to give users access to USB device to be used by Gammu
                     #

                     ACTION!="add|change", GOTO="gammu_acl_rules_end"

                     KERNEL!="ttyACM[0-9]*", GOTO="gammu_acl_rules_end"
                     SUBSYSTEM!="tty", GOTO="gammu_acl_rules_end"

                     # Nokia devices
                     ATTRS{manufacturer}=="Nokia", TAG+="uaccess"

                     # Example for Sony Ericsson J108i Cedar
                     # ATTRS{idVendor}=="0fce", ATTRS{idProduct}=="d14e", TAG+="uaccess"

                     LABEL="gammu_acl_rules_end"

              In case your USB device appears as the serial port in the system (eg.  /dev/ttyACM0
              on Linux or COM5: on Windows), just use same setup as with serial port.

              For Bluetooth connection you have to enter Bluetooth address of your phone (you can
              list  Bluetooth  devices  in range on Linux using hcitool scan command). Optionally
              you can also force Gammu to use specified channel by including channel number after
              slash.

              Before  using  Gammu, your device should be paired with computer or you should have
              set up automatic pairing.

              For Proxy connections, you need to specify command which should be executed. It  is
              supposed  to  pass  bidirectional  communication from Gammu to the device. This can
              happen for example over network.

              For IrDA connections, this parameters is not used at all.

              If IrDA does not work on Linux, you might need to bring up the interface and enable
              discovery (you need to run these commands as root):

                 ip l s dev irda0 up          # Enables irda0 device
                 sysctl net.irda.discovery=1  # Enables device discovery on IrDA

              NOTE:
                 Native IrDA is not supported on Linux, you need to setup virtual serial port for
                 it (eg. /dev/ircomm0) and use it  same  way  as  cable.   This  can  be  usually
                 achieved by loading modules ircomm-tty and irtty-sir:

                     modprobe ircomm-tty
                     modprobe irtty-sir

              SEE ALSO:
                 faq-config

       Port   Deprecated since version 1.27.95: Please use Device instead.

              Alias for Device, kept for backward compatibility.

       Model  Do  not use this parameter unless really needed! The only use case for this is when
              Gammu does not know your phone and misdetects it's features.

              The only special case for using model is to force special type of  OBEX  connection
              instead of letting Gammu try the best suited for selected operation:

              obexfs force using of file browsing service (file system support)

              obexirmc
                     force using of IrMC service (contacts, calendar and notes support)

              obexnone
                     none  service  chosen,  this  has  only  limited use for sending file (gammu
                     sendfile command)

              mobex  m-obex service for Samsung phones

       Use_Locking
              On Posix systems, you might want to lock serial device when it is being used  using
              UUCP-style  lock files. Enabling this option (setting to yes) will make Gammu honor
              these locks and create it on startup. On most  distributions  you  need  additional
              privileges to use locking (eg. you need to be member of uucp group).

              This option has no meaning on Windows.

   Connection options
       SynchronizeTime
              If you want to set time from computer to phone during starting connection.

       StartInfo
              This  option  allows  one to set, that you want (setting yes) to see message on the
              phone screen or phone should enable light for a moment during starting  connection.
              Phone  will  not  beep during starting connection with this option. This works only
              with some Nokia phones.

   Debugging options
       LogFile
              Path to file where information about communication will be stored.

              NOTE:
                 For most debug levels (excluding errors) the log file  is  overwritten  on  each
                 execution.

       LogFormat
              Determines what all will be logged to LogFile. Possible values are:

              nothing
                     no debug level

              text   transmission dump in text format

              textall
                     all possible info in text format

              textalldate
                     all possible info in text format, with time stamp

              errors errors in text format

              errorsdate
                     errors in text format, with time stamp

              binary transmission dump in binary format

              For debugging use either textalldate or textall, it contains all needed information
              to diagnose problems.

       Features
              Custom features for phone. This can be  used  as  override  when  values  coded  in
              common/gsmphones.c  are  bad  or missing. Consult include/gammu-info.h for possible
              values (all GSM_Feature values without leading F_ prefix).  Please  report  correct
              values to Gammu authors.

   Locales and character set options
       GammuCoding
              Forces  using  specified  codepage (for example 1250 will force CP-1250 or utf8 for
              UTF-8). This should not be needed, Gammu detects it according to your locales.

       GammuLoc
              Path  to  directory  with  localisation  files  (the   directory   should   contain
              LANG/LC_MESSAGES/gammu.mo).  If  gammu  is  properly installed it should find these
              files automatically.

   Advanced options
       Advanced options are used to alter default logic, when using these  options  the  user  is
       responsible  for  ensuring  any  settings  are correct for the target device and that they
       produce the desired behaviour.

       atgen_setCNMI
              For configurations using the generic AT command protocol it is possible to override
              the default indicators used when a new SMS message is received.

              The  value for the setting is a comma delimited list of single digits corresponding
              to the values for the AT+CNMI modem command. If a digit is not provided, or if  the
              provided  digit is outside of the acceptable range for the device the default value
              is used.

              For example setting atgen_setcnmi = ,,2 would set the third parameter of  the  CNMI
              command  to  the  value  2,  leaving  the  rest  of  the parameters at default, and
              atgen_setcnmi = 1,,,1 would set the first and fourth parameters respectively.

   Other options
       DataPath
              Additional path where to search for data files. The default path is  configured  on
              build time (and defaults to /usr/share/data/gammu on Unix systems). Currently it is
              used only for searching files to upload to phone using gammu install.

EXAMPLES

       There is more complete example available in Gammu documentation, see gammu.

   Connection examples
       Gammu configuration for Nokia phone using DLR-3 cable:

          [gammu]
          device = /dev/ttyACM0
          connection = dlr3

       Gammu configuration for Sony-Ericsson phone (or any other AT compatible  phone)  connected
       using USB cable:

          [gammu]
          device = /dev/ttyACM0
          connection = at

       Gammu  configuration  for Sony-Ericsson (or any other AT compatible phone) connected using
       bluetooth:

          [gammu]
          device = B0:0B:00:00:FA:CE
          connection = blueat

       Gammu configuration for phone which needs to manually  adjust  Bluetooth  channel  to  use
       channel 42:

          [gammu]
          device = B0:0B:00:00:FA:CE/42
          connection = blueat

   Working with multiple phones
       Gammu  can  be  configured for multiple phones (however only one connection is used at one
       time, you can choose which one to use with gammu -s parameter). Configuration  for  phones
       on three serial ports would look like following:

          [gammu]
          device = /dev/ttyS0
          connection = at

          [gammmu1]
          device = /dev/ttyS1
          connection = at

          [gammmu2]
          device = /dev/ttyS2
          connection = at

   Connecting to remote phone
       New in version 1.36.7.

       You can connect using Gammu to phone running on different host. This can be achieved using
       proxy connection, which executes command to forward bi-directional communication with  the
       phone.

          [gammu]
          device = ssh root@my.router /usr/local/bin/myscript /dev/ttyUSB0
          connection = proxyat

       You   can   find   sample   script   which   can   be   used   on   the   remote  side  in
       contrib/proxy/gammu-backend.

   Fully documented example
       You can find this sample file as docs/config/gammurc in Gammu sources.

          ; This is a sample ~/.gammurc file.
          ; In Unix/Linux  copy it into your home directory and name it .gammurc
          ;                or into /etc and name it gammurc
          ; In Win32       copy it into directory with Gammu.exe and name gammurc
          ; More about parameters later
          ; Anything behind ; or # is comment.
          ; -----------------------------------------------------------------------------

          [gammu]

          device = com8:
          connection = irdaphonet
          ; Do not use model configuration unless you really need it
          ;model = 6110
          ;synchronizetime = yes
          ;logfile = gammulog
          ;logformat = textall
          ;use_locking = yes
          ;gammuloc = locfile
          ;startinfo = yes
          ;gammucoding = utf8
          ;usephonedb = yes

          [gammu1]

          device = com8:
          ;model = 6110
          connection = fbusblue
          ;synchronizetime = yes
          ;logfile = gammulog
          ;logformat = textall
          ;use_locking = yes
          ;gammuloc = locfile
          ;startinfo = yes
          ;gammucoding = utf8

          ; Step 1. Please find required Connection parameter and look into assigned
          ; with it device type. With some Connection you must set concrete model

          ; ================================================================ cables =====
          ; New Nokia protocol for FBUS/DAU9P
          ;    Connection "fbus", device type serial
          ; New Nokia protocol for DLR3/DLR3P
          ;    Connection "fbusdlr3"/"dlr3", device type serial
          ; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard
          ;                              like 6230)
          ;    Connection "dku2phonet"/"dku2", device type dku2 on Windows
          ;    Connection "fbususb" on Linux
          ; New Nokia protocol for DKU5 (and phone without USB converter on phone
          ;                              mainboard like 5100)
          ;    Connection "dku5fbus"/"dku5", device type dku5
          ; New Nokia protocol for PL2303 USB cable (and phone without USB converter
          ;                                          on phone mainboard like 5100)
          ;    Connection "fbuspl2303", device type usb
          ; Old Nokia protocol for MBUS/DAU9P
          ;    Connection "mbus", device type serial
          ; Variants:
          ; You can modify a bit behaviour of connection using additional flags
          ; specified just after connection name like connection-variant.
          ; If you're using ARK3116 cable (or any other which does not like dtr
          ; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr.
          ; If cable you use is not powered over DTR/RTS, try using -nopower variant of
          ; connection, eg. fbus-nopower.
          ; -----------------------------------------------------------------------------
          ; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None
          ; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc.
          ;    Connection "at19200"/"at115200"/.., device type serial
          ; AT commands for DKU2 cable
          ;    Connection "dku2at", device type dku2
          ; ============================================================== infrared =====
          ; Nokia protocol for infrared with Nokia 6110/6130/6150
          ;    Connection "fbusirda"/"infrared", device type serial
          ; Nokia protocol for infrared with other Nokia models
          ;    Connection "irdaphonet"/"irda", device type irda
          ; -----------------------------------------------------------------------------
          ; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc.
          ;    Connection "irdaat", device type irda
          ; -----------------------------------------------------------------------------
          ; OBEX for infrared
          ;    Connection "irdaobex", device type irda.
          ; ============================================================= Bluetooth =====
          ; Nokia protocol with serial device set in BT stack (WidComm, other) from
          ; adequate service and Nokia 6210
          ;    Connection "fbusblue", device type serial
          ; Nokia protocol with serial device set in BT stack (WidComm, other) from
          ; adequate service and other Nokia models
          ;    Connection "phonetblue", device type serial
          ; -----------------------------------------------------------------------------
          ; Nokia protocol for Bluetooth stack with Nokia 6210
          ;    Connection "bluerffbus", device type BT
          ; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform
          ; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..)
          ;    Connection "bluerfphonet", device type BT
          ; Nokia protocol for Bluetooth stack with other DCT4 Nokia models
          ;    Connection "bluephonet", device type BT
          ; -----------------------------------------------------------------------------
          ; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't
          ; inform about BT services correctly (6310, 6310i with firmware lower
          ; than 5.50, 8910,..)
          ;    Connection "bluerfat", device type BT
          ; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.)
          ;    Connection "blueat", device type BT
          ; -----------------------------------------------------------------------------
          ; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about
          ; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...)
          ;    Connection "bluerfobex", device type BT
          ; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.)
          ;    Connection "blueobex", device type BT.
          ; -----------------------------------------------------------------------------
          ;    Connection "bluerfgnapbus", device type BT, model "gnap"
          ;    Connection "irdagnapbus", device type irda, model "gnap"

          ; Step2. According to device type from Step1 and used OS set Port parameter

          ; -----------------------------------------------------------------------------
          ; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix
          ; ----------|---------------------------------|--------------------------------
          ; serial    | "com*:"                         | "/dev/ttyS*"
          ;           | (example "com1:")               | (example "/dev/ttyS1")
          ;           |                                 | or "/dev/tts/**" (with DevFS)
          ;           |                                 | virtual serial ports like
          ;           |                                 | "/dev/ircomm*" or "/dev/rfcomm*"
          ; ----------|---------------------------------|--------------------------------
          ; irda      | ignored (can be empty)          | ignored (can be empty)
          ; ----------|---------------------------------|--------------------------------
          ; BT        | Bluetooth device address (example "00:11:22:33:44:55").
          ;           | Optionally you can also include channel after slash
          ;           | (example "00:11:22:33:44:55/12"). Can be also empty.
          ; ----------|---------------------------------|--------------------------------
          ; dku2      | ignored (can be empty)          | /dev/ttyUSB* or /dev/ttyACM*
          ; ----------|---------------------------------|--------------------------------
          ; dku5      | ignored (can be empty)          | connection with it not possible
          ; ----------|---------------------------------|--------------------------------
          ; usb       | connection with it not possible | "/dev/ttyUSB*"

          ; Step3. Set other config parameters

          ; -----------------------------------------------------------------------------
          ; Parameter name  | Description
          ; ----------------|------------------------------------------------------------
          ; Model           | Should not be used unless you have a good reason to do so.
          ;                 | If Gammu doesn't recognize your phone model, put it here.
          ;                 | Example values: "6110", "6150", "6210", "8210"
          ; SynchronizeTime | if you want to set time from computer to phone during
          ;                 | starting connection. Do not rather use this option when
          ;                 | when to reset phone during connection (in some phones need
          ;                 | to set time again after restart)
          ; GammuLoc        | name of localisation file
          ; StartInfo       | this option allows one to set, that you want (setting "yes")
          ;                 | to see message on the phone screen or phone should enable
          ;                 | light for a moment during starting connection. Phone
          ;                 | WON'T beep during starting connection with this option.
          ; GammuCoding     | forces using specified codepage (in win32 - for example
          ;                 | "1250" will force CP1250) or UTF8 (in Linux - "utf8")
          ; ----------------|------------------------------------------------------------
          ; Logfile         | Use, when want to have logfile from communication.
          ; Logformat       | What debug info and format should be used:
          ;                 |   "nothing" - no debug level (default)
          ;                 |   "text"    - transmission dump in text format
          ;                 |   "textall" - all possible info in text format
          ;                 |   "errors"  - errors in text format
          ;                 |   "binary"  - transmission dump in binary format
          ; ----------------|------------------------------------------------------------
          ; Features        | Custom features for phone. This can be used as override
          ;                 | when values coded in common/gsmphones.c are bad or
          ;                 | missing. Consult include/gammu-info.h for possible values
          ;                 | (all Feature values without leading F_ prefix).
          ;                 | Please report correct values to Gammu authors.
          ; ----------------|------------------------------------------------------------
          ; Use_Locking     | under Unix/Linux use "yes", if want to lock used device
          ;                 | to prevent using it by other applications. In win32 ignored

          ; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us

AUTHOR

       Michal Čihař <michal@cihar.com>

COPYRIGHT

       2009-2015, Michal Čihař <michal@cihar.com>