Provided by: xrdp_0.9.24-4_amd64 bug

NAME

       sesman.ini - Configuration file for xrdp-sesman(8)

DESCRIPTION

       sesman.ini  consists  of  several  sections.  Each section starts with the section name in
       square brackets, followed by a list  of  parameter=value  lines.  Following  sections  are
       recognized:

       [Globals]
              Global configuration

       [Logging]
              Logging subsystem

       [Sessions]
              Session management

       [Security]
              Access control

       [X11rdp], [Xvnc], [Xorg]
              X11 server settings for supported servers

       [Chansrv]
              Settings for xrdp-chansrv(8)

       [ChansrvLogging]
              Logging settings for xrdp-chansrv(8)

       [SessionVariables]
              Environment variables for the session

       All  parameters and values (except for file names and paths) are case insensitive, and are
       described in detail below. If any parameter is specified more than once,  the  last  entry
       will be used. Options specified outside their proper section will be ignored.

GLOBALS

       Following parameters can be used in the [Globals] section.

       ListenAddress=ip address
              xrdp-sesman   listening  address.  If  not  specified,  defaults  to  0.0.0.0  (all
              interfaces).

       ListenPort=port number
              xrdp-sesman listening port. If not specified, defaults to 3350.

       EnableUserWindowManager=[true|false]
              If set to 1, true or yes, this option enables user specific  startup  script.  That
              is,  xrdp-sesman  will  execute  the  script  specified  by UserWindowManager if it
              exists.

       UserWindowManager=filename
              Path of the startup script relative to the user's home directory.  If  present  and
              enabled   by   EnableUserWindowManager,   that   script   is  executed  instead  of
              DefaultWindowManager.

       DefaultWindowManager=filename
              Full path or relative path of the default startup script  used  by  xrdp-sesman  to
              start  a  session.  If the path is not a full path, it will be resolved as relative
              path to /etc/xrdp. If not specified, defaults to /etc/xrdp/startwm.sh.

       ReconnectScript=filename
              Full path or relative path if the script which executed when  users  reconnects  to
              the  existing  session.  If  the  path  is  not a full path, it will be resolved as
              relative path to /etc/xrdp. If not specified, defaults to /etc/xrdp/reconnectwm.sh.

LOGGING

       Following parameters can be used in the [Logging] and [ChansrvLogging] sections.

       LogFile=filename
              Log file path. It can be either absolute or relative. If not specified, defaults to
              ./sesman.log It is ignored in the [ChansrvLogging] section since the channel server
              creates one log file per display and instead uses the  following  log  file  naming
              convention xrdp-chansrv.${DISPLAY}.log

       LogLevel=level
              This option can have one of the following values:

              CORE  or  0  -  Log only core messages. Those messages are logged regardless of the
              selected logging level.

              ERROR or 1 - Log only error messages.

              WARNING, WARN or 2 - Logs warnings and error messages.

              INFO or 3 - Log errors, warnings and informational messages.

              DEBUG or 4 - Log everything. If xrdp-sesman is compiled in debug mode, this options
              will output many more low-level messages.

       EnableSyslog=[true|false]
              If set to 1, true or yes, this option enables logging to syslog.

       SyslogLevel=level
              Logging  level  for  syslog.  It can have the same values as LogLevel.  Defaults to
              DEBUG.

       EnableConsole=[true|false]
              If set to 1, true or yes, this option enables logging to the console (ie. stdout).

       ConsoleLevel=level
              Logging level for the console. It can have the same values as  LogLevel.   Defaults
              to DEBUG.

       EnableProcessId=[true|false]
              If  set  to  1,  true or yes, this option enables logging the process id in all log
              messages. Defaults to false.

SESSIONS

       Following parameters can be used in the [Sessions] section.

       X11DisplayOffset=number
              The first X display number available for  xrdp-sesman.  This  prevents  xrdp-sesman
              from interfering with real X11 servers. If not specified, defaults to 10.

       MaxSessions=number
              Sets the maximum number of simultaneous sessions. If not set or set to 0, unlimited
              session are allowed.

       KillDisconnected=[true|false]
              If set to 1, true or yes, every session will be killed within DisconnectedTimeLimit
              seconds  after  the  user  disconnects.   This  setting  currently  only works with
              xorgxrdp sessions.

       DisconnectedTimeLimit=number
              Sets the time limit for KillDisconnected to a value greater than 60.   Values  less
              than  60  are  to  be  overridden  with 60.  This setting currently only works with
              xorgxrdp sessions.

       IdleTimeLimit=number
              Sets the time limit (in seconds) before an  idle  session  is  disconnected.   Idle
              means  no  keyboard  inputs  and  no  mouse  moves/clicks  here.  If set to 0, idle
              sessions will never be disconnected by timeout.   This  works  only  with  xorgxrdp
              sessions. Moreover, xorgxrdp must be v0.2.9 or later.

       Policy=[Default|UBD|UBI|UBC|UBDI|UBDC]
              Session  allocation  policy.  Used to decide when to allocate a new session. Set to
              one of the following values:

              Default - session per <User,BitPerPixel>
              UBD - session per <User,BitPerPixel,DisplaySize>
              UBI - session per <User,BitPerPixel,IPAddr>
              UBC - session per <User,BitPerPixel,Connection>
              UBDI - session per <User,BitPerPixel,DisplaySize,IPAddr>
              UBDC - session per <User,BitPerPixel,DisplaySize,Connection>

              Note that the User and BitPerPixel  criteria  cannot  be  turned  off.  DisplaySize
              refers  to the initial geometry of a connection, as actual display sizes can change
              dynamically.

SECURITY

       Following parameters can be used in the [Security] section.

       AllowRootLogin=[true|false]
              If set to 1, true or yes, enables root login on the terminal server.

       MaxLoginRetry=number
              The number of login attempts that are allowed on terminal  server.  If  set  to  0,
              unlimited attempts are allowed. If not specified, defaults to 3.

       TerminalServerUsers=group
              Only  the  users  belonging to the specified group are allowed to login on terminal
              server. If unset or set to an invalid or non-existent group, login for all users is
              enabled.

       TerminalServerAdmins=group
              This  option  is  currently  ignored!  Only  members of this group can have session
              management rights.

       RestrictOutboundClipboard=[all|none|text|file|image]
              If set to all, will restrict the clipboard outbound from  the  server,  to  prevent
              data  copied  inside  the xrdp session to be pasted in the client. Default value is
              none.   In  addition,  you  can  control  text/file/image   transfer   restrictions
              respectively. It also accepts comma separated list such as text,file,image.

              none - No restriction about copying inbound clipboard data.
              all - Restrict to copy inbound clipboard data.
              text - Restrict to copy only inbound text clipboard data.
              file - Restrict to copy only inbound file clipboard data.
              image - Restrict to copy only inbound image clipboard data.

              To keep compatibility, the following aliases are also available.
              true - an alias of all.
              false - an alias of none.
              yes - an alias of all.

       RestrictInboundClipboard=[none|all|text|file|image]
              If set to all, will restrict the clipboard inbound from the client, to prevent data
              copied inside the client to be pasted in the xrdp session. Default value  is  none.
              In addition, you can control text/file/image transfer restrictions respectively. It
              also accepts comma separated list such as text,file,image.

              none - No restriction about copying inbound clipboard data.
              all - Restrict to copy inbound clipboard data.
              text - Restrict to copy only inbound text clipboard data.
              file - Restrict to copy only inbound file clipboard data.
              image - Restrict to copy only inbound image clipboard data.

              To keep compatibility, the following aliases are also available.
              true - an alias of all.
              false - an alias of none.
              yes - an alias of all.

       AlwaysGroupCheck=[true|false]
              If set to 1, true or yes, require group membership even if the group  specified  in
              TerminalServerUsers doesn't exist.

       AllowAlternateShell=[true|false]
              If set to 0, false or no, prevent usage of alternate shells by users.

X11 SERVER

       Following parameters can be used in the [X11rdp], [Xvnc] and [Xorg] sections.

       param=string
              Multiple  param  lines are supported. This first line specifies the path to the X11
              server executable. Following lines specify command line arguments passed to the X11
              server.

CHANSRV

       Following parameters can be used in the [Chansrv] section.

       FuseMountName=string
              Directory  for  drive  redirection.  Created if it doesn't exist. If not specified,
              defaults to xrdp_client.  If first character is not a  '/',  this  is  relative  to
              $HOME.

              If  first  character is a '/' this is an absolute path. The following substitutions
              are made in this string:-
                  %U - Username
                  %u - Numeric UID
                  %% - Percent character

              If this format is used:-

              1) The directory path permissions  MUST  be  configured  correctly  by  the  system
                 administrator  or  the  system  itself  -  xrdp-chansrv will not do this for you
                 (although it will create the final directories owned by the user).

              2) The desktop may not automatically display a link for the  redirected  drive.  To
                 fix this, consult the docs for your chosen desktop.

       FileUmask=mode
              Additional  umask  to  apply  to files in the FuseMountName directory.  The default
              value of 077 prevents other  users  on  the  system  from  reading  files  on  your
              redirected drives. This may not be appropriate for all environments, and so you can
              change this value to allow other users to access your remote files if required.

       EnableFuseMount=[true|false]
              Defaults to true.  Set to false to disable xrdp-chansrv's use of  the  FUSE  system
              feature, even if it has been built with this feature enabled.

              Setting this value to false will disable the following application features:-

              -  drive redirection

              -  copying-and-pasting of files

       UseNautilus3FlistFormat=[false|true]
              Defaults  to  false.   Set to true to make file copy-paste compatible with Nautilus
              from GNOME 3 versions later than 3.29.92. Do not use this for any other reason.

              This setting will be removed in a later version of xrdp, when GNOME 3 is no  longer
              supported.

SESSIONS VARIABLES

       All  entries  in  the  [SessionVariables]  section are set as environment variables in the
       user's session.

FILES

       /etc/xrdp/sesman.ini

SEE ALSO

       xrdp-sesman(8), xrdp-sesrun(8), xrdp(8), xrdp.ini(5)

       For more info on xrdp see ⟨http://www.xrdp.org/