Provided by: stella_6.7.1+dfsg-1build2_amd64 bug

NAME

       stella - Atari 2600 emulator

SYNOPSIS

       stella [options] <ROM file>

DESCRIPTION

       stella  is  a  comprehensive emulator of the old Atari 2600 video-game console. It support
       most Atari 2600 games and many peripherals.

OPTIONS

       stella accepts the following options:

       -video <opengl|opengles2|opengles|software>
              Use OpenGL, OpenGLES or SDL software  rendering  mode;  the  default  is  the  best
              available mode detected.

       -vsync <1|0>
              Synchronize  screen  updates  to  the  vertical  blank  period.  This can result in
              smoother updates, and eliminate tearing.

       -fullscreen <1|0>
              Play the game in fullscreen mode (1) or in a window (0).

       -center <1|0>
              Center all windows (if possible).

       -windowedpos <XxY>
              Set the window position in windowed emulator mode.

       -display <number>
              Set the display for Stella's emulator.

       -palette <standard|z26|user>
              Sets the palette to either normal Stella, the one used in the z26  emulator,  or  a
              user-defined palette.

       -pal.phase_ntsc <number>
              Adjust phase shift of 'custom' NTSC palette.

       -pal.phase_pal <number>
              Adjust phase shift of 'custom' PAL palette.

       -pal.hue <number>
              Adjust hue of current palette (range -1.0 to 1.0).

       --pal.saturation <number>
              Adjust saturation of current palette (range -1.0 to 1.0).

       -pal.contrast <number>
              Adjust contrast of current palette (range -1.0 to 1.0).

       -pal.brightness <number>
              Adjust brightness of current palette (range -1.0 to 1.0).

       -pal.gamma <number>
              Adjust gamma of current palette (range -1.0 to 1.0).

       -speed <number>
              Controls  the emulation speed (as a percentage, between 10 and 1000, from one-tenth
              the native speed to ten times the native speed).

       -turbo <1|0>
              Enable 'Turbo' mode for maximum emulation speed.

       -uimessages <1|0>
              Enable or disable display of message in the  UI.   Note  that  messages  indicating
              serious errors override this setting, and are always shown.

       -audio.enabled <1|0>
              Enable or disable sound generation.

       -audio.volume <number>
              Set the volume (0 - 100).

       -audio.device <number>
              Set the audio device (0 for the default device).

       -audio.preset <1-5>
              Set  an  audio  preset.  Numbers  in  sequence represent presets for 'custom', 'low
              quality, medium lag', 'high quality, medium  lag',  'high  quality,  low  lag'  and
              'ultra quality, minimal lag'.

       -audio.fragment_size <number>
              Set  the  number  of  samples  in  a single fragment processed by the audio driver.
              number must be a power of two between 128 and 4096  inclusive.   Under  Debian  the
              recommended value is 512.

       -audio.sample_rate <44100|48000|96000>
              Set sound sample output frequency.

       -audio.resampling_quality <1|2|3>
              Set resampling quality to low (1), high (2) or ultra (3).

       -audio.headroom <1-20>
              Set number of additional half-frames to prebuffer.

       -audio.buffer_size <1-20>
              Set maximum number of additional half-frames to buffer.

       -audio.stereo <1|0>
              Enable or disable stereo mode for all ROMs.

       -audio.dpc_pitch <10000-30000>
              Set the pitch of Pitfall II music.

       -tia.zoom <zoom>
              Use the specified zoom level (integer) while in TIA/emulation mode.

       -tia.vsizeadjust <-5-5>
              Adjust the display height of the TIA image.

       -tia.inter <1|0>
              Use interpolation for the TIA image (results in blending/smoothing of the image).

       -tia.fs_stretch <1|0>
              Stretch  TIA  image  completely  while  in fullscreen mode, vs. keeping the correct
              aspect ratio.

       -tia.fs_overscan <0-10>
              Add overscan to TIA image while in fullscreen mode

       -tia.dbgcolors <r|o|y|g|b|p...>
              Assigns the colours (r)ed, (o)range, (y)ellow, (g)reen, (b)lue and (p)urple to each
              graphical  register  P0/M0/P1/M1/PF/BL,  respectively.   Currently,  these  can  be
              changed around to apply different colours to the respective register.

       -tia.correct_aspect <1|0>
              Enable aspect ratio correct scaling.

       -tv.filter <0-5>
              Blargg TV effects, 0 is disabled, next numbers in sequence  represent  presets  for
              "Composite", "S-Video", "RGB", "Bad Adjust" and "Custom" modes.

       -tv.sharpness <number>
              Blargg TV effects 'sharpness' (only available in custom mode, range -1.0 to 1.0).

       -tv.resolution <number>
              Blargg TV effects 'resolution' (only available in custom mode, range -1.0 to 1.0).

       -tv.artifacts <number>
              Blargg TV effects 'artifacts' (only available in custom mode, range -1.0 to 1.0).

       -tv.fringing <number>
              Blargg TV effects 'fringing' (only available in custom mode, range -1.0 to 1.0).

       -tv.bleed <number>
              Blargg TV effects 'bleed' (only available in custom mode, range -1.0 to 1.0).

       -tv.phosphor <always|byrom>
              Determines  how  phosphor mode is enabled. If always, then the ROM properties entry
              is ignored, and phosphor mode is always turned on.  Otherwise, the  ROM  properties
              determine whether phosphor mode is used for each ROM.

       -tv.phosblend <0-100>
              Enable  phosphor  blending  level; 0 implies no mixing, and 100 is full mixing (not
              recommended). Note that this doesn't actually enable phosphor mode;  that  is  done
              for each ROM in the ROM properties. Higher blend values will intensify the phosphor
              effect. Depending on your display and personal preferences, the optimal default for
              you  may  vary.  Slow LCDs (especially for office use) may only need a low blend of
              around 30, while fast switching gamer LCDs may need about 70 to look similar  to  a
              CRT.

       -tv.scanlines <0-100>
              TV effects scanline intensity, where 0 means completely off.

       -cheat <code>
              Use  the  specified  cheatcode (see the Cheat section in the provided documentation
              for a description of cheatcodes).

       -loglevel <0|1|2>
              Indicates level of logging to  perform  while  the  application  is  running.  Zero
              completely  disables  logging  (except  for  serious  errors),  while the remaining
              numbers show increasingly more detail.

       -logtoconsole <1|0>
              Indicates that logged output should be printed to the console/commandline  as  it's
              being  collected.  An internal log will still be kept, and the amount of logging is
              still controlled by loglevel.

       -joydeadzone <number>
              Sets the joystick deadzone area for analog joysticks. Accepts a number from 0 - 29,
              and  uses  the  formula 3200 + number * 1000. So the possible deadzone values range
              from 3200 to 32200.

       -psense <number>
              Sensitivity for emulation of paddles when using  analog  paddles.  Valid  range  of
              values is from 1 to 30, with larger numbers causing faster movement

       -dejitter.base <0-10>
              Strength of paddle input averaging.

       -dejitter.diff <0-10>
              Impact of fast paddle movement on input averaging.

       -dcsense <number>
              Sensitivity  for  emulation of driving controllers when using a mouse.  Valid range
              of values is from 1 to 20, with larger numbers causing faster movement.

       -autofirerate <0-30>
              Automatic trigger rate of the fire buttons in Hz (0 = disabled)

       -joyallow4 <1|0>
              Allow all 4 directions on a joystick to  be  pressed  simultaneously.  Bumper  Bash
              ignores this setting, and always allows all 4 directions.

       -modcombo <1|0>
              Use  modifier (Shift/Alt/Control)-x key combos. This is normally enabled, since the
              'Quit' command is tied to 'Control-q'. However, there are times when  you  want  to
              disable  them.   E.g.  a  2-player  game  is  using  either the 'f' or 'r' keys for
              movement,  and  pressing  Control  (for  Fire)  will  perform  an  unwanted  action
              associated with Control-r or Control-f default keys.

       -saport <lr|rl>
              Determines  how to enumerate the Stelladaptor/2600-daptor devices in the order they
              are found: 'lr' means first is left port, second is  right  port,  'rl'  means  the
              opposite.

       -avoxport <name>
              Set the name of the serial port where an AtariVox is connected.

       -usemouse <always|analog|never>
              Use  mouse  as a controller as specified by ROM properties in specific case. always
              and never are self-explanatory, analog means only for analog-type devices (paddles,
              trackball, etc.).

       -msense <number>
              Sensitivity for emulation of paddles when using a mouse. number may range from 1 to
              20, with larger numbers causing faster movement.

       -tsense <number>
              Sensitivity for emulation of trackball controllers when using a mouse.  number  may
              range from 1 to 20, with larger numbers causing faster movement.

       -dsense <number>
              Sensitivity  for emulation of paddles when using a digital device (joystick digital
              axis or button, keyboard key, etc.). number may range from 1  to  20,  with  larger
              numbers causing faster movement.

       -cursor <0|1|2|3>
              Set mouse cursor state in UI/emulation modes.

       -grabmouse <1|0>
              Keeps the mouse in the game window in emulation mode.

       -autoslot <1|0>
              Automatically switch to the next available save state slot after saving a ROM state
              file.

       -saveonexit <none|current|all>
              Automatically save no, current or all states when exiting  emulation.   The  latter
              also loads all states when entering emulation.

       -fastscbios <1|0>
              Disable Supercharger BIOS progress loading bars.

       -threads <1|0>
              Enable multi-threaded video rendering (may not improve performance on all systems).

       -snapsavedir <path>
              The directory to save snapshot files to.

       -snaploaddir <path>
              The directory to load snapshot files from.

       -snapname <int|rom>
              When  saving  snapshots,  use  either  the internal database name or the actual ROM
              filename.

       -sssingle <1|0>
              Generate single snapshot instead of many, overwriting any previous snapshots.

       -ss1x <1|0>
              Ignore any scaling applied to the TIA image, and save  snapshot  in  unscaled  (1x)
              mode.

       -ssinterval <number>
              Set  the  interval  in seconds between taking snapshots in continuous snapshot mode
              (currently, 1 - 10).

       -rominfo <rom>
              Display detailed information about the given ROM, and then exit Stella.

       -listrominfo
              Prints relevant contents of the Stella ROM database, one ROM  per  line,  and  then
              exit Stella. This can be used for external frontends.

       -exitlauncher <1|0>
              Always  exit to ROM launcher when exiting a ROM (normally, an exit to launcher only
              happens when started with the launcher).

       -launcherpos <XxY>
              Set the window position in windowed ROM launcher mode.

       -launcherdisplay <number>
              Set the display for the ROM launcher.

       -launcherres <WxH>
              Set the size of the ROM launcher.

       -launcherfont <small|medium|large>
              Set the size of the font in the ROM launcher.

       -launcherroms <1|0>
              Specifies whether to show ROMs only (the default) or all files in the ROM launcher.

       -romviewer <0|1|2>
              Hide ROM info viewer in ROM launcher mode (0), or use the given zoom  level  (1  or
              2).

       -uipalette <standard|classic|light>
              Use the specified palette for UI elements.

       -dialogfont <small|low_medium|medium|large|large12|large14|large16>
              Set the size of the font in the dialogs.

       -dialogpos <0-4>
              Set the position of dialogs within Stella windows (0 = center).

       -hidpi <0|1>
              Enables the HiDPI mode which scales the UI by a factor of two.

       -confirmexit <0|1>
              Display a popup when emulation is exited.

       -listdelay <delay>
              Set  the  amount of time to wait between treating successive keypresses as a single
              word in list widgets (value can range from  300-1000).   Use  0  to  disable  list-
              skipping completely.

       -mwheel <lines>
              Set the number of lines a mousewheel will scroll in the UI.

       -mdouble <speed>
              Set the mouse double click speed in the UI (100-900 ms).

       -ctrldelay <delay>
              Set the delay before controller input will start repeating in the UI (200-1000 ms).

       -ctrlrate <rate>
              Set the controller repeat rate in the UI (2-30 repeats/s).

       -romdir <dir>
              Set the directory where the ROM launcher will start.

       -followlauncher <0|1>
              Make the start path follow ROM launcher navigation.

       -maxres <WxH>
              Useful  for  developers,  this sets the maximum size of window that can be created,
              allowing to simulate testing on 'smaller' systems.

       -basedir <dir>
              Override the base directory for all config files.

       -baseinappdir
              Override the base  directory  for  all  config  files  by  attempting  to  use  the
              application directory. For now this is only supported in Windows.

       -help  Print a help message describing these options, and then exit Stella.

       The  following are useful to developers. Only use them if you know what you're doing! Note
       that in all cases, the values supplied to the arguments are not case sensitive.

       -dis.resolve <1|0>
              Try to differentiate between code vs. data sections in the  disassembler.  See  the
              Debugger section in the provided documentation for more information.

       -dis.gfxformat <2|16>
              Sets the base to use for displaying GFX sections in the disassembler.

       -dis.showaddr <1|0>
              Shows/hides opcode addresses in the disassembler.

       -dis.relocate <1|0>
              Relocate calls out of address range in the disassembler.

       -dbg.pos <XxY>
              Set the window position in windowed debugger mode.

       -dbg.display <number>
              Set the display for the debugger.

       -dbg.res <WxH>
              Set the size of the debugger window.

       -dbg.fontsize <small|medium|large>
              Set the font size in the debugger window.

       -dbg.fontstyle <0|1|2|3>
              How  to  use  bold fonts in the debugger window. 0 means all normal font, 1 is bold
              labels only, 2 is bold non-labels only, 3 is all bold font.

       -dbg.ghostreadstrap <1|0>
              Debugger considers/ignores 'ghost' reads for trap addresses.

       -dbg.uhex <0|1>
              Lower/uppercase hexadecimal display.

       -break <address>
              Set a breakpoint at a specified address.

       -debug Immediately jump to debugger mode when starting Stella.

       -holdjoy0 [UDLRF]
              Start the emulator with the specified left joystick direction and button held  down
              (UF  for  up  and  fire).  After entering the emulation, you will have to press and
              release the direction again to release the event.

       -holdjoy1 [UDLRF]
              Start the emulator with the specified right joystick direction and button held down
              (UF  for  up  and  fire).  After entering the emulation, you will have to press and
              release the direction again to release the event.

       -holdselect
              Start the emulator with the Game Select  switch  held  down.   After  entering  the
              emulation, you will have to press and release 'Select' to release the event.

       -holdreset
              Start  the  emulator  with  the  Game  Reset  switch held down.  After entering the
              emulation, you will have to press and release 'Reset' to release the event.

       -bs <type>, -type <type>
              Set "Cartridge.Type" property. See the Game  Properties  section  in  the  provided
              documentation for valid types.

       -startbank <fIbank>
              Sets "Cartridge.StartBank" property.

       -channels <Mono|Stereo>
              Set "Cartridge.Sound" property.

       -ld <A|B>
              Set "Console.LeftDifficulty" property.

       -rd <A|B>
              Set "Console.RightDifficulty" property.

       -tv <Color|BlackAndWhite>
              Set "Console.TelevitionType" property.

       -sp <Yes|No>
              Set "Console.SwapPorts" property.

       -lc <type>
              Set  "Controller.Left"  property.  See  the  Controller  Properties  section in the
              provided documentation for valid types.

       -lq1 <type>
              Set "Controller.Left1" property for QuadTari. See the QuadTari  Properties  section
              in the provided documentation for valid types.

       -lq2 <type>
              Set  "Controller.Left2"  property for QuadTari. See the QuadTari Properties section
              in the provided documentation for valid types.

       -rc <type>
              Set "Controller.Right" property. See  the  Controller  Properties  section  in  the
              provided documentation for valid types.

       -rq1 <type>
              Set  "Controller.Right1" property for QuadTari. See the QuadTari Properties section
              in the provided documentation for valid types.

       -rq2 <type>
              Set "Controller.Right2" property for QuadTari. See the QuadTari Properties  section
              in the provided documentation for valid types.

       -bc <type>
              Sets  both  "Controller.Left" and "Controller.Right" properties. See the Controller
              Properties section in the provided documentation for valid types.

       -aq <type
              Set     "Controller.Left1",     "Controller.Left2",     "Controller.Right1"     and
              "Controller.Right2" properties for QuadTari. See the QuadTari Properties section in
              the provided documentation for valid types.

       -cp <Yes|No>
              Set "Controller.SwapPaddles" property. See the Controller Properties section in the
              provided documentation for valid types.

       -pxcenter<-10..30>
              Set "Controller.PaddlesXCenter" property.

       -pycenter<-10..30>
              Set "Controller.PaddlesYCenter" property.

       -ma <Auto|XY>
              Set  "Controller.MouseAxis"  property. See the Controller Properties section in the
              provided documentation for valid types.

       -format <format>
              Set "Display.Format" property. See the Emulation Properties section in the provided
              documentation for valid formats.

       -vcenter <number>
              Set "Display.VCenter" property (-5..5).

       -pp <Yes|No>
              Set "Display.Phosphor" property.

       -ppblend <number>
              Set  "Display.PPBlend"  property,  used  for  phosphor  effect  (0-100). Default is
              whatever is specified for tv.phosblend.

       The following are available in two sets, one for players (prefixed by plr.)  and  one  for
       developers (prefixed by dev.).  Only use them if you know what you're doing!  Note that in
       all cases, the values supplied to the arguments are not case sensitive.

       -dev.settings <1|0>
              Select developer (1) or player (0) set.

       -<plr|dev>.stats <1|0>
              Overlay console info on the TIA image during emulation.

       -<plr|dev>.detectedinfo <1|0>
              Display detected settings info when a ROM is loaded.

       -<plr|dev>.console <2600|7800>
              Select console for B/W and Pause key handling and RAM initialization.

       -<plr|dev>.bankrandom <1|0>
              On reset, randomize the startup bank (only for selected bankswitch types).

       -<plr|dev>.ramrandom <1|0>
              On reset, either randomize all RAM content, or zero it out instead.

       -<plr|dev>.cpurandom [SAXYP]
              On reset, randomize the content of the specified CPU registers.

       -dev.tiadriven <1|0>
              Set unused TIA pins to be randomly driven high or low on a read/peek.

       -dev.rwportbreak <1|0>
              Since the 2600 has no dedicated R/W line, different addresses are used for RAM read
              or  write  access.   If  the  code  reads from such a write address, this causes an
              unwanted, semi-random write to that address.  When this  option  is  enabled,  such
              reads interrupt emulation and the debugger is entered.

       -dev.wrportbreak <1|0>
              Same  as  above.  If the code writes to such a read address, nothing happens. But a
              developer should be made aware of it, because this indicates  a  problem  with  the
              code.   When  this  option  is  enabled,  such  writes  interrupt emulation and the
              debugger is entered.

       -plr.thumb.trapfatal <true|false>
              The default of true allows the Thumb ARM emulation to throw an exception and  enter
              the  debugger on fatal errors.  When disabled, such fatal errors are simply logged,
              and emulation continues.  Do not use this  unless  you  know  exactly  what  you're
              doing, as it changes the behaviour as compared to real hardware.

       -<plr|dev>.eepromaccess <1|0>
              When enabled, each read or write access to the AtariVox/SaveKey EEPROM is signalled
              by a message.

       -dev.tia.type <standard|koolaidman|cosmicark|pesco|quickstep|heman|custom>
              Set emulated TIA type.

       -dev.tia.plinvphase <1|0>
              Enable/disable inverted HMOVE clock phase for players (Kool Aid Man glitch).

       -dev.tia.msinvphase <1|0>
              Enable/disable inverted HMOVE clock phase for missiles (Cosmic Ark stars glitch).

       -dev.tia.blinvphase <1|0>
              Enable/disable inverted HMOVE clock phase for ball.

       -dev.tia.delaypfbits <1|0>
              Enable/disable playfield bits delayed by one color clock (stray playfield pixels in
              Pesco).

       -dev.tia.delaypfcolor <1|0>
              Enable/disable  playfield color delayed by one color clock (colored step borders in
              Quick Step!).

       -dev.tia.delaybkcolor <1|0>
              Enable/disable background color delayed by one color clock (stray  pixels  in  Indy
              500 menu hack).

       -dev.tia.delayplswap <1|0>
              Enable/disable player swap delayed by one color clock (He-Man title glitch).

       -dev.tia.delayblswap <1|0>
              Enable/disable ball swap delayed by one color clock.

       -<plr|dev>.tv.jitter <1|0>
              Enable  TV  jitter/roll  effect,  when  there are too many or too few scanlines per
              frame.

       -<plr|dev>.tv.jitter_recovery <1-20>
              When TV jitter/roll effect is enabled, determines how long to delay  recovery  time
              (recovery spread over multiple frames).

       -<plr|dev>.colorloss <1|0>
              Enable/disable the PAL color-loss effect.

       -<plr|dev>.debugcolors <1|0>
              Enable/disable the fixed debug colors.

       -<plr|dev>.timemachine <1|0>
              Enables the Time Machine.

       -<plr|dev>.tm.size <20-1000>
              Defines the Time Machine buffer size.

       -<plr|dev>.tm.uncompressed <0-1000>
              Defines  the uncompressed Time Machine buffer size.  Must be less than Time Machine
              the buffer size.

       -<plr|dev>.tm.interval <1f|3f|10f|30f|1s|3s|10s>
              Defines the interval between two save states.

       -<plr|dev>.tm.horizon <3s|10s|30s|1m|3m|10m|30m|60m>
              Defines the horizon of the Time Machine.

KEYBOARD CONTROLS

       The Atari 2600 console controls and controllers are mapped to the computer's  keyboard  as
       shown  in  the  following sections. However, most of these events can be remapped to other
       keys on your keyboard or buttons on your joystick.

   Console controls (can be remapped)
       Control + q
              Exit emulator

       Escape Exit game mode/enter launcher mode

       Tab/Escape
              Enter/exit options mode

       Backslash (\)
              Enter/exit command mode

       Backquote (`)
              Enter/exit debugger

       F1     Select Game

       F2     Reset Game

       F3     Color TV

       F4     Black/White TV

       F5     Left Player Difficulty A

       F6     Left Player Difficulty B

       F7     Right Player Difficulty A

       F8     Right Player Difficulty B

       F9     Save state to current slot

       Alt + F9
              Save all Time Machine states

       Shift + F10
              Change to previous state slot

       F10    Change to next state slot

       Alt + F10
              Automatically change state slot

       F11    Load state from current slot

       Alt + F11
              Load all states into Time Machine

       F12    Save PNG snapshot

       Pause  Pause/resume emulation

   Joystick / BoosterGrip Controller (can be remapped)
       Left joystick:

       Up arrow
              Joystick up

       Down arrow
              Joystick down

       Left arrow
              Joystick left

       Right arrow
              Joystick right

       Left Control, Space
              Fire button

       4      Trigger button

       5      Booster button

       Right joystick:

       Y      Joystick up

       H      Joystick down

       G      Joystick left

       J      Joystick right

       F      Fire button

       6      Trigger button

       7      Booster button

   Paddle Controller digital emulation (can be remapped independently of joystick controller)
       By default the left paddles are mapped to the left joystick as follows:

       Left   Paddle 0 decrease

       Right  Paddle 0 increase

       Fire   Paddle 0 fire

       Up     Paddle 1 decrease

       Down   Paddle 1 increase

       Booster
              Paddle 1 fire

       The same mappings on the right joystick correspond to the right paddles (paddles 2  and  3
       respectively).

   Driving Controller (cannot be remapped, always associated with joystick controllers)
       Each driving controller is mapped to the corresponding joystick, using the left, right and
       fire controls.

   Sega Genesis Controller (cannot be remapped, always associated with joystick and  booster-grip
       controllers)
       Each pad is mapped to the corresponding joystick as follows:

       Up     Up

       Down   Down

       Left   Left

       Right  Right

       Fire   Button 'B'

       Booster
              Button 'C'

   Keypad Controller (can be remapped)
       Left keypad (press the key on the left to emulate the key on the right):

       1      1

       2      2

       3      3

       Q      4

       W      5

       E      6

       A      7

       S      8

       D      9

       Z      .

       X      0

       C      #

       Right keypad:

       8      1

       9      2

       0 (the digit)
              3

       I      4

       O (the letter)
              5

       P      6

       K      7

       L      8

       ;      9

       ,      .

       .      0

       /      #

   CompuMate Controller (cannot be remapped)
       0-9    0-9

       A-Z    A-Z

       Comma  Comma

       Period Period

       Control
              Func

       Shift  Shift

       ; or Return/Enter
              Enter

       / or Space
              Space

       Backspace
              Func-Space

   TV effects (can be remapped, only active in TIA mode)
       Alt + 1
              Disable TV effects

       Alt + 2
              Select 'RGB' preset

       Alt + 3
              Select 'S-Video' preset

       Alt + 4
              Select 'Composite' preset

       Alt + 5
              Select 'Badly adjusted' preset

       Alt + 6
              Select 'Custom' preset

       Shift + Alt + 7
              Select previous 'Custom' mode attribute (in 'Custom' preset mode)

       Alt + 7
              Select next 'Custom' mode attribute (in 'Custom' preset mode)

       Shift + Alt + 8
              Decrease 'Custom' selected attribute value (in 'Custom' preset mode)

       Alt + 8
              Increase 'Custom' selected attribute value (in 'Custom' preset mode)

       Alt + p
              Toggle 'phosphor' effect

       Shift + Alt + 9
              Decrease 'phosphor' blend in phosphor mode

       Alt + 9
              Increase 'phosphor' blend in phosphor mode

       Shift + Alt + 0
              Decrease scanline intensity

       Alt + 0
              Increase scanline intensity

   Developer Keys in TIA mode (can be remapped)
       Alt + L
              Toggle frame stats (scanline count/FPS/BS type etc.)

       Alt + z
              Toggle TIA Player0 object

       Alt + x
              Toggle TIA Player1 object

       Alt + c
              Toggle TIA Missile0 object

       Alt + v
              Toggle TIA Missile1 object

       Alt + b
              Toggle TIA Ball object

       Alt + n
              Toggle TIA Playfield object

       Alt + Comma
              Toggle all TIA objects

       Shift + Alt + z
              Toggle TIA Player0 collisions

       Shift + Alt + x
              Toggle TIA Player1 collisions

       Shift + Alt + c
              Toggle TIA Missile0 collisions

       Shift + Alt + v
              Toggle TIA Missile1 collisions

       Shift + Alt + b
              Toggle TIA Ball collisions

       Shift + Alt + n
              Toggle TIA Playfield collisions

       Shift + Alt + Comma
              Toggle all TIA collisions

       Alt + .
              Toggle TIA 'Fixed Debug Colors' mode

       Control + L
              Toggle PAL color-loss effect

       Alt + j
              Toggle TV 'Jitter' effect

   Other Keys (can be remapped)
       Alt + =
              Switch  to next larger zoom level in windowed mode, toggle stretching in fullscreen
              mode

       Alt + -
              Switch to next smaller zoom level in windowed mode, toggle stretching in fullscreen
              mode

       Alt + Enter
              Toggle fullscreen/windowed mode

       Shift + PageUp
              Increase overscan in fullscreen mode

       Shift + PageDown
              Decrease overscan in fullscreen mode

       Alt + PageUp
              Move display up (uses "Display.VCenter")

       Alt + PageDown
              Move display down (uses "Display.VCenter")

       Control + f
              Switch display format in increasing order (NTSC/PAL/SECAM etc.)

       Shift + Control + f
              Switch display format in decreasing order (NTSC/PAL/SECAM etc.)

       Control + p
              Switch palette (Standard/Z26/User)

       Control + i
              Toggle display interpolation

       Control + ]
              Toggle sound on/off

       Alt + [
              Decrease volume

       Alt + ]
              Increase volume

       Control + 0
              Switch mouse between controller emulation modes (see Game Properties - Controller)

       Control + g
              Toggle grab mouse

       Control + 1
              Swap Stelladaptor/2600-daptor port ordering

       Control + r
              Reload  current  ROM  (singlecart  ROM, TIA mode), load next game in ROM (multicart
              ROM, TIA mode), reload ROM listing (ROM launcher mode)

       Backspace
              Emulate 'frying' effect (TIA mode), go to parent directory (UI mode)

       Alt + s
              Save continuous PNG snapshots (per interval defined in Snapshot Settings)

       Shift + Alt + s
              Save continuous PNG snapshots (every frame)

       Alt + t
              Toggle 'Time Machine' mode

       t      Enter the Time Machine dialog

       t/Escape/Space
              Exit the Time Machine dialog

       Alt + Left arrow
              Rewind by one state (enters the Time Machine dialog)

       Shift + Alt + Left arrow
              Rewind by 10 states (enters the Time Machine dialog)

       Alt + Down arrow
              Rewind all states (enters the Time Machine dialog)

       Alt + Right arrow
              Unwind by one state (enters the Time Machine dialog)

       Shift + Alt + Right arrow
              Unwind by 10 states (enters the Time Machine dialog)

       Alt + Up arrow
              Unwind all states (enters the Time Machine dialog)

   UI keys in Text Editing areas (cannot be remapped)
       Home   Move cursor to beginning of line

       End    Move cursor to end of line

       Delete Remove character to right of cursor

       Backspace
              Remove character to left of cursor

       Control + a
              Same function as 'Home'

       Control + e
              Same function as 'End'

       Control + d
              Same function as 'Delete'

       Control + k
              Remove all characters from cursor to end of line

       Control + u
              Remove all characters from cursor to beginning of line

       Control + w
              Remove entire word to left of cursor

       Control + Left
              Move cursor to beginning of word to the left

       Control + Right
              Move cursor to beginning of word to the right

       Control + c
              Copy entire line to clipboard (not complete)

       Control + v
              Paste clipboard contents (not complete)

FILES

       ~/.config/stella/stellarc
              Default options (command line options override these). Lines starting with ';'  are
              considered comments and are ignored. Any other line must be of the form <command> =
              <value>, where command is the same as that specified on the command  line,  without
              the '-' character, and value is the value given to the setting.

       ~/.config/stella/nvram/atarivox_eeprom.dat
              Default storage for the emulated EEPROM portion of an attached AtariVox device.

       ~/.config/stella/nvram/savekey_eeprom.dat
              Default storage for the emulated EEPROM portion of an attached SaveKey device.

       ~/.config/stella/stella.cht
              Default location of the cheat database file.

SEE ALSO

       /usr/share/doc/stella/index.html, /usr/share/doc/stella/debugger.html.

AUTHORS

       stella was written by Bradford W. Mott, Stephen Anthony and the Stella Team.

       This   manual   page   was  adapted  from  the  provided  documentation  by  Stephen  Kitt
       <skitt@debian.org>, for the Debian GNU/Linux system (but may be used by  others).  It  was
       last modified for stella version 6.1.