Provided by: iproute2_6.1.0-1ubuntu6_amd64 bug

NAME

       ip-route - routing table management

SYNOPSIS

       ip [ ip-OPTIONS ] route  { COMMAND | help }

       ip route { show | flush } SELECTOR

       ip route save SELECTOR

       ip route restore

       ip route get ROUTE_GET_FLAGS ADDRESS [ from ADDRESS iif STRING  ] [ oif STRING ] [ mark
               MARK ] [ tos TOS ] [ vrf NAME ] [ ipproto PROTOCOL ] [ sport NUMBER ] [ dport
               NUMBER ]

       ip route { add | del | change | append | replace } ROUTE

       SELECTOR := [ root PREFIX ] [ match PREFIX ] [ exact PREFIX ] [ table TABLE_ID ] [ vrf
               NAME ] [ proto RTPROTO ] [ type TYPE ] [ scope SCOPE ]

       ROUTE := NODE_SPEC [ INFO_SPEC ]

       NODE_SPEC := [ TYPE ] PREFIX [ tos TOS ] [ table TABLE_ID ] [ proto RTPROTO ] [ scope
               SCOPE ] [ metric METRIC ] [ ttl-propagate { enabled | disabled } ]

       INFO_SPEC := { NH | nhid ID } OPTIONS FLAGS [ nexthop NH ] ...

       NH := [ encap ENCAP ] [ via [ FAMILY ] ADDRESS ] [ dev STRING ] [ weight NUMBER ] NHFLAGS

       FAMILY := [ inet | inet6 | mpls | bridge | link ]

       OPTIONS := FLAGS [ mtu NUMBER ] [ advmss NUMBER ] [ as [ to ] ADDRESS ] rtt TIME ] [
               rttvar TIME ] [ reordering NUMBER ] [ window NUMBER ] [ cwnd NUMBER ] [ ssthresh
               NUMBER ] [ realms REALM ] [ rto_min TIME ] [ initcwnd NUMBER ] [ initrwnd NUMBER ]
               [ features FEATURES ] [ quickack BOOL ] [ congctl NAME ] [ pref PREF ] [ expires
               TIME ] [ fastopen_no_cookie BOOL ]

       TYPE := [ unicast | local | broadcast | multicast | throw | unreachable | prohibit |
               blackhole | nat ]

       TABLE_ID := [ local| main | default | all | NUMBER ]

       SCOPE := [ host | link | global | NUMBER ]

       NHFLAGS := [ onlink | pervasive ]

       RTPROTO := [ kernel | boot | static | NUMBER ]

       FEATURES := [ ecn | ]

       PREF := [ low | medium | high ]

       ENCAP := [ ENCAP_MPLS | ENCAP_IP | ENCAP_BPF | ENCAP_SEG6 | ENCAP_SEG6LOCAL | ENCAP_IOAM6
               ]

       ENCAP_MPLS := mpls [ LABEL ] [ ttl TTL ]

       ENCAP_IP := ip id TUNNEL_ID dst REMOTE_IP [ src SRC ] [ tos TOS ] [ ttl TTL ]

       ENCAP_BPF := bpf [ in PROG ] [ out PROG ] [ xmit PROG ] [ headroom SIZE ]

       ENCAP_SEG6 := seg6 mode [ encap | encap.red | inline | l2encap | l2encap.red ] segs
               SEGMENTS [ hmac KEYID ]

       ENCAP_SEG6LOCAL := seg6local action SEG6_ACTION [ SEG6_ACTION_PARAM ] [ count ]

       ENCAP_IOAM6 := ioam6 [ freq K/N ] mode [ inline | encap | auto ] [ tundst ADDRESS ] trace
               prealloc type IOAM6_TRACE_TYPE ns IOAM6_NAMESPACE size IOAM6_TRACE_SIZE

       ROUTE_GET_FLAGS :=  [ fibmatch  ]

DESCRIPTION

       ip route is used to manipulate entries in the kernel routing tables.

       Route types:

               unicast - the route entry describes real paths to the destinations covered by the
               route prefix.

               unreachable - these destinations are unreachable. Packets are discarded and the
               ICMP message host unreachable is generated.  The local senders get an EHOSTUNREACH
               error.

               blackhole - these destinations are unreachable. Packets are discarded silently.
               The local senders get an EINVAL error.

               prohibit - these destinations are unreachable. Packets are discarded and the ICMP
               message communication administratively prohibited is generated. The local senders
               get an EACCES error.

               local - the destinations are assigned to this host. The packets are looped back
               and delivered locally.

               broadcast - the destinations are broadcast addresses. The packets are sent as link
               broadcasts.

               throw - a special control route used together with policy rules. If such a route
               is selected, lookup in this table is terminated pretending that no route was
               found. Without policy routing it is equivalent to the absence of the route in the
               routing table. The packets are dropped and the ICMP message net unreachable is
               generated. The local senders get an ENETUNREACH error.

               nat - a special NAT route. Destinations covered by the prefix are considered to be
               dummy (or external) addresses which require translation to real (or internal) ones
               before forwarding. The addresses to translate to are selected with the attribute
               via.  Warning: Route NAT is no longer supported in Linux 2.6.

               anycast - not implemented the destinations are anycast addresses assigned to this
               host. They are mainly equivalent to local with one difference: such addresses are
               invalid when used as the source address of any packet.

               multicast - a special type used for multicast routing. It is not present in normal
               routing tables.

       Route tables: Linux-2.x can pack routes into several routing tables identified by a number
       in the range from 1 to 2^32-1 or by name from the file /etc/iproute2/rt_tables By default
       all normal routes are inserted into the main table (ID 254) and the kernel only uses this
       table when calculating routes.  Values (0, 253, 254, and 255) are reserved for built-in
       use.

       Actually, one other table always exists, which is invisible but even more important. It is
       the local table (ID 255). This table consists of routes for local and broadcast addresses.
       The kernel maintains this table automatically and the administrator usually need not
       modify it or even look at it.

       The multiple routing tables enter the game when policy routing is used.

       ip route add
              add new route

       ip route change
              change route

       ip route replace
              change or add new one

              to TYPE PREFIX (default)
                     the destination prefix of the route. If TYPE is omitted, ip assumes type
                     unicast.  Other values of TYPE are listed above.  PREFIX is an IP or IPv6
                     address optionally followed by a slash and the prefix length. If the length
                     of the prefix is missing, ip assumes a full-length host route. There is also
                     a special PREFIX default - which is equivalent to IP 0/0 or to IPv6 ::/0.

              tos TOS

              dsfield TOS
                     the Type Of Service (TOS) key. This key has no associated mask and the
                     longest match is understood as: First, compare the TOS of the route and of
                     the packet. If they are not equal, then the packet may still match a route
                     with a zero TOS.  TOS is either an 8 bit hexadecimal number or an identifier
                     from /etc/iproute2/rt_dsfield.

              metric NUMBER

              preference NUMBER
                     the preference value of the route.  NUMBER is an arbitrary 32bit number,
                     where routes with lower values are preferred.

              table TABLEID
                     the table to add this route to.  TABLEID may be a number or a string from
                     the file /etc/iproute2/rt_tables.  If this parameter is omitted, ip assumes
                     the main table, with the exception of local, broadcast and nat routes, which
                     are put into the local table by default.

              vrf NAME
                     the vrf name to add this route to. Implicitly means the table associated
                     with the VRF.

              dev NAME
                     the output device name.

              via [ FAMILY ] ADDRESS
                     the address of the nexthop router, in the address family FAMILY.  Actually,
                     the sense of this field depends on the route type.  For normal unicast
                     routes it is either the true next hop router or, if it is a direct route
                     installed in BSD compatibility mode, it can be a local address of the
                     interface. For NAT routes it is the first address of the block of translated
                     IP destinations.

              src ADDRESS
                     the source address to prefer when sending to the destinations covered by the
                     route prefix.

              realm REALMID
                     the realm to which this route is assigned.  REALMID may be a number or a
                     string from the file /etc/iproute2/rt_realms.

              mtu MTU

              mtu lock MTU
                     the MTU along the path to the destination. If the modifier lock is not used,
                     the MTU may be updated by the kernel due to Path MTU Discovery. If the
                     modifier lock is used, no path MTU discovery will be tried, all packets will
                     be sent without the DF bit in IPv4 case or fragmented to MTU for IPv6.

              window NUMBER
                     the maximal window for TCP to advertise to these destinations, measured in
                     bytes. It limits maximal data bursts that our TCP peers are allowed to send
                     to us.

              rtt TIME
                     the initial RTT ('Round Trip Time') estimate. If no suffix is specified the
                     units are raw values passed directly to the routing code to maintain
                     compatibility with previous releases.  Otherwise if a suffix of s, sec or
                     secs is used to specify seconds and ms, msec or msecs to specify
                     milliseconds.

              rttvar TIME (Linux 2.3.15+ only)
                     the initial RTT variance estimate. Values are specified as with rtt above.

              rto_min TIME (Linux 2.6.23+ only)
                     the minimum TCP Retransmission TimeOut to use when communicating with this
                     destination. Values are specified as with rtt above.

              ssthresh NUMBER (Linux 2.3.15+ only)
                     an estimate for the initial slow start threshold.

              cwnd NUMBER (Linux 2.3.15+ only)
                     the clamp for congestion window. It is ignored if the lock flag is not used.

              initcwnd NUMBER (Linux 2.5.70+ only)
                     the initial congestion window size for connections to this destination.
                     Actual window size is this value multiplied by the MSS (``Maximal Segment
                     Size'') for same connection. The default is zero, meaning to use the values
                     specified in RFC2414.

              initrwnd NUMBER (Linux 2.6.33+ only)
                     the initial receive window size for connections to this destination.  Actual
                     window size is this value multiplied by the MSS of the connection.  The
                     default value is zero, meaning to use Slow Start value.

              features FEATURES (Linux3.18+only)
                     Enable or disable per-route features. Only available feature at this time is
                     ecn to enable explicit congestion notification when initiating connections
                     to the given destination network.  When responding to a connection request
                     from the given network, ecn will also be used even if the net.ipv4.tcp_ecn
                     sysctl is set to 0.

              quickack BOOL (Linux 3.11+ only)
                     Enable or disable quick ack for connections to this destination.

              fastopen_no_cookie BOOL (Linux 4.15+ only)
                     Enable TCP Fastopen without a cookie for connections to this destination.

              congctl NAME (Linux 3.20+ only)

              congctl lock NAME (Linux 3.20+ only)
                     Sets a specific TCP congestion control algorithm only for a given
                     destination.  If not specified, Linux keeps the current global default TCP
                     congestion control algorithm, or the one set from the application. If the
                     modifier lock is not used, an application may nevertheless overwrite the
                     suggested congestion control algorithm for that destination. If the modifier
                     lock is used, then an application is not allowed to overwrite the specified
                     congestion control algorithm for that destination, thus it will be
                     enforced/guaranteed to use the proposed algorithm.

              advmss NUMBER (Linux 2.3.15+ only)
                     the MSS ('Maximal Segment Size') to advertise to these destinations when
                     establishing TCP connections. If it is not given, Linux uses a default value
                     calculated from the first hop device MTU.  (If the path to these destination
                     is asymmetric, this guess may be wrong.)

              reordering NUMBER (Linux 2.3.15+ only)
                     Maximal reordering on the path to this destination.  If it is not given,
                     Linux uses the value selected with sysctl variable net/ipv4/tcp_reordering.

              nexthop NEXTHOP
                     the nexthop of a multipath route.  NEXTHOP is a complex value with its own
                     syntax similar to the top level argument lists:

                             via [ FAMILY ] ADDRESS - is the nexthop router.

                             dev NAME - is the output device.

                             weight NUMBER - is a weight for this element of a multipath route
                             reflecting its relative bandwidth or quality.

                     The internal buffer used in iproute2 limits the maximum number of nexthops
                     that may be specified in one go. If only ADDRESS is given, the current
                     buffer size allows for 144 IPv6 nexthops and 253 IPv4 ones. For IPv4, this
                     effectively limits the number of nexthops possible per route. With IPv6,
                     further nexthops may be appended to the same route via ip route append
                     command.

              scope SCOPE_VAL
                     the scope of the destinations covered by the route prefix.  SCOPE_VAL may be
                     a number or a string from the file /etc/iproute2/rt_scopes.  If this
                     parameter is omitted, ip assumes scope global for all gatewayed unicast
                     routes, scope link for direct unicast and broadcast routes and scope host
                     for local routes.

              protocol RTPROTO
                     the routing protocol identifier of this route.  RTPROTO may be a number or a
                     string from the file /etc/iproute2/rt_protos.  If the routing protocol ID is
                     not given, ip assumes protocol boot (i.e. it assumes the route was added by
                     someone who doesn't understand what they are doing). Several protocol values
                     have a fixed interpretation.  Namely:

                             redirect - the route was installed due to an ICMP redirect.

                             kernel - the route was installed by the kernel during
                             autoconfiguration.

                             boot - the route was installed during the bootup sequence.  If a
                             routing daemon starts, it will purge all of them.

                             static - the route was installed by the administrator to override
                             dynamic routing. Routing daemon will respect them and, probably,
                             even advertise them to its peers.

                             ra - the route was installed by Router Discovery protocol.

                     The rest of the values are not reserved and the administrator is free to
                     assign (or not to assign) protocol tags.

              onlink pretend that the nexthop is directly attached to this link, even if it does
                     not match any interface prefix.

              pref PREF
                     the IPv6 route preference.  PREF is a string specifying the route preference
                     as defined in RFC4191 for Router Discovery messages. Namely:

                             low - the route has a lowest priority

                             medium - the route has a default priority

                             high - the route has a highest priority

              nhid ID
                     use nexthop object with given id as nexthop specification.

              encap ENCAPTYPE ENCAPHDR
                     attach tunnel encapsulation attributes to this route.

                     ENCAPTYPE is a string specifying the supported encapsulation type. Namely:

                             mpls - encapsulation type MPLS

                             ip - IP encapsulation (Geneve, GRE, VXLAN, ...)

                             bpf - Execution of BPF program

                             seg6 - encapsulation type IPv6 Segment Routing

                             seg6local - local SRv6 segment processing

                             ioam6 - encapsulation type IPv6 IOAM

                             xfrm - encapsulation type XFRM

                     ENCAPHDR is a set of encapsulation attributes specific to the ENCAPTYPE.

                             mpls
                               MPLSLABEL - mpls label stack with labels separated by /

                               ttl TTL - TTL to use for MPLS header or 0 to inherit from IP
                               header

                             ip
                               id TUNNEL_ID dst REMOTE_IP [ src SRC ] [ tos TOS ] [ ttl TTL ] [
                               key ] [ csum ] [ seq ]

                             bpf
                               in PROG - BPF program to execute for incoming packets

                               out PROG - BPF program to execute for outgoing packets

                               xmit PROG - BPF program to execute for transmitted packets

                               headroom SIZE - Size of header BPF program will attach (xmit)

                             seg6
                               mode inline - Directly insert Segment Routing Header after IPv6
                               header

                               mode encap - Encapsulate packet in an outer IPv6 header with SRH

                               mode encap.red - Encapsulate packet in an outer IPv6 header with
                               SRH applying the reduced segment list. When there is only one
                               segment and the HMAC is not present, the SRH is omitted.

                               mode l2encap - Encapsulate ingress L2 frame within an outer IPv6
                               header and SRH

                               mode l2encap.red - Encapsulate ingress L2 frame within an outer
                               IPv6 header and SRH applying the reduced segment list. When there
                               is only one segment and the HMAC is not present, the SRH is
                               omitted.

                               SEGMENTS - List of comma-separated IPv6 addresses

                               KEYID - Numerical value in decimal representation. See ip-sr(8).

                             seg6local
                               SEG6_ACTION [ SEG6_ACTION_PARAM ] [ count ] - Operation to perform
                               on matching packets. The optional count attribute is used to
                               collect statistics on the processing of actions.  Three counters
                               are implemented: 1) packets correctly processed; 2) bytes
                               correctly processed; 3) packets that cause a processing error
                               (i.e., missing SID List, wrong SID List, etc). To retrieve the
                               counters related to an action use the -s flag in the show command.
                               The following actions are currently supported (Linux 4.14+ only).

                                 End [ flavors FLAVORS ] - Regular SRv6 processing as
                                 intermediate segment endpoint.  This action only accepts packets
                                 with a non-zero Segments Left value. Other matching packets are
                                 dropped. The presence of flavors can change the regular
                                 processing of an End behavior according to the user-provided
                                 Flavor operations and information carried in the packet.  See
                                 Flavors parameters section.

                                 End.X nh6 NEXTHOP - Regular SRv6 processing as intermediate
                                 segment endpoint.  Additionally, forward processed packets to
                                 given next-hop.  This action only accepts packets with a non-
                                 zero Segments Left value. Other matching packets are dropped.

                                 End.DX6 nh6 NEXTHOP - Decapsulate inner IPv6 packet and forward
                                 it to the specified next-hop. If the argument is set to ::, then
                                 the next-hop is selected according to the local selection rules.
                                 This action only accepts packets with either a zero Segments
                                 Left value or no SRH at all, and an inner IPv6 packet. Other
                                 matching packets are dropped.

                                 End.DT6 { table | vrftable } TABLEID - Decapsulate the inner
                                 IPv6 packet and forward it according to the specified lookup
                                 table.  TABLEID is either a number or a string from the file
                                 /etc/iproute2/rt_tables.  If vrftable is used, the argument must
                                 be a VRF device associated with the table id. Moreover, the VRF
                                 table associated with the table id must be configured with the
                                 VRF strict mode turned on (net.vrf.strict_mode=1). This action
                                 only accepts packets with either a zero Segments Left value or
                                 no SRH at all, and an inner IPv6 packet. Other matching packets
                                 are dropped.

                                 End.DT4 vrftable TABLEID - Decapsulate the inner IPv4 packet and
                                 forward it according to the specified lookup table.  TABLEID is
                                 either a number or a string from the file
                                 /etc/iproute2/rt_tables.  The argument must be a VRF device
                                 associated with the table id.  Moreover, the VRF table
                                 associated with the table id must be configured with the VRF
                                 strict mode turned on (net.vrf.strict_mode=1). This action only
                                 accepts packets with either a zero Segments Left value or no SRH
                                 at all, and an inner IPv4 packet. Other matching packets are
                                 dropped.

                                 End.DT46 vrftable TABLEID - Decapsulate the inner IPv4 or IPv6
                                 packet and forward it according to the specified lookup table.
                                 TABLEID is either a number or a string from the file
                                 /etc/iproute2/rt_tables.  The argument must be a VRF device
                                 associated with the table id.  Moreover, the VRF table
                                 associated with the table id must be configured with the VRF
                                 strict mode turned on (net.vrf.strict_mode=1). This action only
                                 accepts packets with either a zero Segments Left value or no SRH
                                 at all, and an inner IPv4 or IPv6 packet. Other matching packets
                                 are dropped.

                                 End.B6 srh segs SEGMENTS [ hmac KEYID ] - Insert the specified
                                 SRH immediately after the IPv6 header, update the DA with the
                                 first segment of the newly inserted SRH, then forward the
                                 resulting packet. The original SRH is not modified. This action
                                 only accepts packets with a non-zero Segments Left value. Other
                                 matching packets are dropped.

                                 End.B6.Encaps srh segs SEGMENTS [ hmac KEYID ] - Regular SRv6
                                 processing as intermediate segment endpoint.  Additionally,
                                 encapsulate the matching packet within an outer IPv6 header
                                 followed by the specified SRH. The destination address of the
                                 outer IPv6 header is set to the first segment of the new SRH.
                                 The source address is set as described in ip-sr(8).

                                 Flavors parameters

                                 The flavors represent additional operations that can modify or
                                 extend a subset of the existing behaviors.

                                   flavors OPERATION[,OPERATION] [ATTRIBUTES]

                                     OPERATION := { psp | usp | usd | next-csid }

                                     ATTRIBUTES := { KEY VALUE } [ ATTRIBUTES ]

                                     KEY := { lblen | nflen }

                                   psp - Penultimate Segment Pop of the SRH (not yet supported in
                                   kernel)

                                   usp - Ultimate Segment Pop of the SRH (not yet supported in
                                   kernel)

                                   usd - Ultimate Segment Decapsulation (not yet supported in
                                   kernel)

                                   next-csid - The NEXT-C-SID mechanism offers the possibility of
                                   encoding several SRv6 segments within a single 128 bit SID
                                   address. The NEXT-C-SID flavor can be configured to support
                                   user-provided Locator-Block and Locator-Node Function lengths.
                                   If Locator-Block and/or Locator-Node Function lengths are not
                                   provided by the user during configuration of an SRv6 End
                                   behavior instance with NEXT-C-SID flavor, the default value is
                                   32-bit for Locator-Block and 16-bit for Locator-Node Function.

                                   lblen VALUE - defines the Locator-Block length for NEXT-C-SID
                                   flavor.  The Locator-Block length must be greater than 0 and
                                   evenly divisible by 8. This attribute can be used only with
                                   NEXT-C-SID flavor.

                                   nflen VALUE - defines the Locator-Node Function length for
                                   NEXT-C-SID flavors. The Locator-Node Function length must be
                                   greater than 0 and evenly divisible by 8. This attribute can
                                   be used only with NEXT-C-SID flavor.

                               ioam6
                                 freq K/N - Inject IOAM in K packets every N packets (default is
                                 1/1).

                                 mode inline - Directly insert IOAM after IPv6 header (default
                                 mode).

                                 mode encap - Encapsulate packet in an outer IPv6 header with
                                 IOAM.

                                 mode auto - Automatically use inline mode for local packets and
                                 encap mode for in-transit packets.

                                 tundst ADDRESS - IPv6 address of the tunnel destination (outer
                                 header), not used with inline mode.

                                 type IOAM6_TRACE_TYPE - List of IOAM data required in the trace,
                                 represented by a bitfield (24 bits).

                                 ns IOAM6_NAMESPACE - Numerical value to represent an IOAM
                                 namespace. See ip-ioam(8).

                                 size IOAM6_TRACE_SIZE - Size, in octets, of the pre-allocated
                                 trace data block.

                               xfrm
                                 if_id IF_ID  [ link_dev LINK_DEV ]

              expires TIME (Linux 4.4+ only)
                     the route will be deleted after the expires time.  Only support IPv6 at
                     present.

              ttl-propagate { enabled | disabled }
                     Control whether TTL should be propagated from any encap into the un-
                     encapsulated packet, overriding any global configuration. Only supported for
                     MPLS at present.

       ip route delete
              delete route
              ip route del has the same arguments as ip route add, but their semantics are a bit
              different.

              Key values (to, tos, preference and table) select the route to delete. If optional
              attributes are present, ip verifies that they coincide with the attributes of the
              route to delete.  If no route with the given key and attributes was found, ip route
              del fails.

       ip route show
              list routes
              the command displays the contents of the routing tables or the route(s) selected by
              some criteria.

              to SELECTOR (default)
                     only select routes from the given range of destinations.  SELECTOR consists
                     of an optional modifier (root, match or exact) and a prefix.  root PREFIX
                     selects routes with prefixes not shorter than PREFIX.  F.e.  root 0/0
                     selects the entire routing table.  match PREFIX selects routes with prefixes
                     not longer than PREFIX.  F.e.  match 10.0/16 selects 10.0/16, 10/8 and 0/0,
                     but it does not select 10.1/16 and 10.0.0/24.  And exact PREFIX (or just
                     PREFIX) selects routes with this exact prefix. If neither of these options
                     are present, ip assumes root 0/0 i.e. it lists the entire table.

              tos TOS

              dsfield TOS
                     only select routes with the given TOS.

              table TABLEID
                     show the routes from this table(s). The default setting is to show table
                     main.  TABLEID may either be the ID of a real table or one of the special
                     values:

                             all - list all of the tables.

                             cache - dump the routing cache.

              vrf NAME
                     show the routes for the table associated with the vrf name

              cloned

              cached list cloned routes i.e. routes which were dynamically forked from other
                     routes because some route attribute (f.e. MTU) was updated.  Actually, it is
                     equivalent to table cache.

              from SELECTOR
                     the same syntax as for to, but it binds the source address range rather than
                     destinations.  Note that the from option only works with cloned routes.

              protocol RTPROTO
                     only list routes of this protocol.

              scope SCOPE_VAL
                     only list routes with this scope.

              type TYPE
                     only list routes of this type.

              dev NAME
                     only list routes going via this device.

              via [ FAMILY ] PREFIX
                     only list routes going via the nexthop routers selected by PREFIX.

              src PREFIX
                     only list routes with preferred source addresses selected by PREFIX.

              realm REALMID

              realms FROMREALM/TOREALM
                     only list routes with these realms.

       ip route flush
              flush routing tables
              this command flushes routes selected by some criteria.

              The arguments have the same syntax and semantics as the arguments of ip route show,
              but routing tables are not listed but purged. The only difference is the default
              action: show dumps all the IP main routing table but flush prints the helper page.

              With the -statistics option, the command becomes verbose. It prints out the number
              of deleted routes and the number of rounds made to flush the routing table. If the
              option is given twice, ip route flush also dumps all the deleted routes in the
              format described in the previous subsection.

       ip route get
              get a single route
              this command gets a single route to a destination and prints its contents exactly
              as the kernel sees it.

              fibmatch
                     Return full fib lookup matched route. Default is to return the resolved dst
                     entry

              to ADDRESS (default)
                     the destination address.

              from ADDRESS
                     the source address.

              tos TOS

              dsfield TOS
                     the Type Of Service.

              iif NAME
                     the device from which this packet is expected to arrive.

              oif NAME
                     force the output device on which this packet will be routed.

              mark MARK
                     the firewall mark (fwmark)

              vrf NAME
                     force the vrf device on which this packet will be routed.

              ipproto PROTOCOL
                     ip protocol as seen by the route lookup

              sport NUMBER
                     source port as seen by the route lookup

              dport NUMBER
                     destination port as seen by the route lookup

              connected
                     if no source address (option from) was given, relookup the route with the
                     source set to the preferred address received from the first lookup.  If
                     policy routing is used, it may be a different route.

              Note that this operation is not equivalent to ip route show.  show shows existing
              routes.  get resolves them and creates new clones if necessary. Essentially, get is
              equivalent to sending a packet along this path.  If the iif argument is not given,
              the kernel creates a route to output packets towards the requested destination.
              This is equivalent to pinging the destination with a subsequent ip route ls cache,
              however, no packets are actually sent. With the iif argument, the kernel pretends
              that a packet arrived from this interface and searches for a path to forward the
              packet.

       ip route save
              save routing table information to stdout
              This command behaves like ip route show except that the output is raw data suitable
              for passing to ip route restore.

       ip route restore
              restore routing table information from stdin
              This command expects to read a data stream as returned from ip route save.  It will
              attempt to restore the routing table information exactly as it was at the time of
              the save, so any translation of information in the stream (such as device indexes)
              must be done first. Any existing routes are left unchanged. Any routes specified in
              the data stream that already exist in the table will be ignored.

NOTES

       Starting with Linux kernel version 3.6, there is no routing cache for IPv4 anymore. Hence
       ip route show cached will never print any entries on systems with this or newer kernel
       versions.

EXAMPLES

       ip ro
           Show all route entries in the kernel.

       ip route add default via 192.168.1.1 dev eth0
           Adds a default route (for all addresses) via the local gateway 192.168.1.1 that can be
           reached on device eth0.

       ip route add 10.1.1.0/30 encap mpls 200/300 via 10.1.1.1 dev eth0
           Adds an ipv4 route with mpls encapsulation attributes attached to it.

       ip -6 route add 2001:db8:1::/64 encap seg6 mode encap segs 2001:db8:42::1,2001:db8:ffff::2
       dev eth0
           Adds an IPv6 route with SRv6 encapsulation and two segments attached.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End.DT46 vrftable 100 dev vrf100
           Adds an IPv6 route with SRv6 decapsulation and forward with lookup in VRF table.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End flavors next-csid dev eth0
           Adds an IPv6 route with SRv6 End behavior with next-csid flavor enabled.

       ip -6 route add 2001:db8:1::/64 encap seg6local action End flavors next-csid lblen 48
       nflen 16 dev eth0
           Adds an IPv6 route with SRv6 End behavior with next-csid flavor enabled and user-
           provided Locator-Block and Locator-Node Function lengths.

       ip -6 route add 2001:db8:1::/64 encap ioam6 freq 2/5 mode encap tundst 2001:db8:42::1
       trace prealloc type 0x800000 ns 1 size 12 dev eth0
           Adds an IPv6 route with an IOAM Pre-allocated Trace encapsulation (ip6ip6) that only
           includes the hop limit and the node id, configured for the IOAM namespace 1 and a pre-
           allocated data block of 12 octets (will be injected in 2 packets every 5 packets).

       ip route add 10.1.1.0/30 nhid 10
           Adds an ipv4 route using nexthop object with id 10.

SEE ALSO

       ip(8)

AUTHOR

       Original Manpage by Michail Litvak <mci@owl.openwall.com>