Provided by: pcs_0.11.7-1ubuntu1_all bug

NAME

       pcs - pacemaker/corosync configuration system

SYNOPSIS

       pcs [-f file] [-h] [commands]...

DESCRIPTION

       Control and configure pacemaker and corosync.

OPTIONS

       -h, --help
              Display usage and exit.

       -f file
              Perform actions on file instead of active CIB.
              Commands supporting the option use the initial state of the specified file as their
              input and  then  overwrite  the  file  with  the  state  reflecting  the  requested
              operation(s).
              A  few commands only use the specified file in read-only mode since their effect is
              not a CIB modification.

       --debug
              Print all network traffic and external commands run.

       --version
              Print pcs version information. List pcs capabilities if --full is specified.

       --request-timeout=<timeout>
              Timeout for each outgoing request to another node in seconds. Default is 60s.

   Commands:
       cluster
               Configure cluster options and nodes.

       resource
               Manage cluster resources.

       stonith
               Manage fence devices.

       constraint
               Manage resource constraints.

       property
               Manage pacemaker properties.

       acl
               Manage pacemaker access control lists.

       qdevice
               Manage quorum device provider on the local host.

       quorum
               Manage cluster quorum settings.

       booth
               Manage booth (cluster ticket manager).

       status
               View cluster status.

       config
               View and manage cluster configuration.

       pcsd
               Manage pcs daemon.

       host
               Manage hosts known to pcs/pcsd.

       node
               Manage cluster nodes.

       alert
               Manage pacemaker alerts.

       client
               Manage pcsd client configuration.

       dr
               Manage disaster recovery configuration.

       tag
               Manage pacemaker tags.

   resource
       [status [<resource id | tag id>] [node=<node>] [--hide-inactive]]
              Show status of all currently configured resources. If --hide-inactive is specified,
              only  show active resources. If a resource or tag id is specified, only show status
              of the specified resource or resources in the specified tag. If node is  specified,
              only show status of resources configured for the specified node.

       config [--output-format text|cmd|json] [<resource id>]...
              Show options of all currently configured resources or if resource ids are specified
              show the options for the specified resource ids. There  are  3  formats  of  output
              available:  'cmd',  'json'  and 'text', default is 'text'. Format 'text' is a human
              friendly output. Format 'cmd' prints pcs commands which can be used to recreate the
              same   configuration.   Format   'json'   is  a  machine  oriented  output  of  the
              configuration.

       list [filter] [--nodesc]
              Show list of all available  resource  agents  (if  filter  is  provided  then  only
              resource  agents  matching  the  filter  will  be  shown). If --nodesc is used then
              descriptions of resource agents are not printed.

       describe [<standard>:[<provider>:]]<type> [--full]
              Show options for the specified  resource.  If  --full  is  specified,  all  options
              including advanced and deprecated ones are shown.

       create  <resource id> [<standard>:[<provider>:]]<type> [<resource options>] [op <operation
       action> <operation options>  [<operation  action>  <operation  options>]...]  [meta  <meta
       options>]   [clone   [<clone  id>]  [<clone  meta  options>]  |  promotable  [<clone  id>]
       [<promotable meta options>] |  --group  <group  id>  [--before  <resource  id>  |  --after
       <resource  id>] | bundle <bundle id>] [--disabled] [--agent-validation] [--no-default-ops]
       [--wait[=n]]
       create --future <resource id> [<standard>:[<provider>:]]<type>  [<resource  options>]  [op
       <operation  action> <operation options> [<operation action> <operation options>]...] [meta
       <meta options>] [clone [<clone id>] [meta <clone meta options>] | promotable [<clone  id>]
       [meta  <promotable  meta  options>]  |  group  <group  id>  [before  <resource id> | after
       <resource id>] | bundle <bundle id>] [--disabled] [--agent-validation]  [--no-default-ops]
       [--wait[=n]]
              Create specified resource.
              If  clone is used, a clone resource is created. If promotable is used, a promotable
              clone resource is created.
              If --group is specified, the resource is added to the  group  named.  You  can  use
              --before  or  --after  to  specify the position of the added resource relatively to
              some resource already existing in the group.
              If bundle is specified, resource will be created inside of the specified bundle.
              If --disabled is specified, the resource is not started automatically.
              If --agent-validation is specified, resource agent validate-all action will be used
              to validate resource options.
              If  --no-default-ops  is  specified,  only  monitor  operations are created for the
              resource and all other operations use default settings.
              If --wait is specified, pcs will wait up to 'n' seconds for the resource  to  start
              and  then  return  0  if  the resource is started, or 1 if the resource has not yet
              started. If 'n' is not specified it defaults to 60 minutes.
              Specifying --future switches to the new command format that changes the  way  clone
              and promotable meta options are expected to be specified.

              Example:  Create  a  new  resource called 'VirtualIP' with IP address 192.168.0.99,
              netmask of 32, monitored everything 30 seconds, on eth2:
              pcs resource create VirtualIP ocf:heartbeat:IPaddr2 ip=192.168.0.99 cidr_netmask=32
              nic=eth2 op monitor interval=30s

       delete <resource id|group id|bundle id|clone id>
              Deletes  the  resource,  group,  bundle  or  clone  (and  all  resources within the
              group/bundle/clone).

       remove <resource id|group id|bundle id|clone id>
              Deletes the resource,  group,  bundle  or  clone  (and  all  resources  within  the
              group/bundle/clone).

       enable <resource id | tag id>... [--wait[=n]]
              Allow   the  cluster  to  start  the  resources.  Depending  on  the  rest  of  the
              configuration (constraints, options,  failures,  etc),  the  resources  may  remain
              stopped.  If --wait is specified, pcs will wait up to 'n' seconds for the resources
              to start and then return 0 if the resources are started, or 1 if the resources have
              not yet started. If 'n' is not specified it defaults to 60 minutes.

       disable  <resource id | tag id>... [--safe [--brief] [--no-strict]] [--simulate [--brief]]
       [--wait[=n]]
              Attempt to stop the resources if they are  running  and  forbid  the  cluster  from
              starting  them  again.  Depending  on  the  rest of the configuration (constraints,
              options, failures, etc), the resources may remain started.
              If --safe is specified, no changes to the cluster configuration  will  be  made  if
              other  than  specified  resources  would be affected in any way. If --brief is also
              specified, only errors are printed.
              If --no-strict is specified, no changes to the cluster configuration will  be  made
              if  other  than  specified resources would get stopped or demoted. Moving resources
              between nodes is allowed.
              If --simulate is specified, no changes to the cluster configuration  will  be  made
              and  the  effect  of  the  changes  will  be  printed  instead.  If --brief is also
              specified, only a list of affected resources not specified in the command  will  be
              printed.
              If  --wait  is specified, pcs will wait up to 'n' seconds for the resources to stop
              and then return 0 if the resources are stopped or  1  if  the  resources  have  not
              stopped. If 'n' is not specified it defaults to 60 minutes.

       safe-disable  <resource  id  |  tag  id>... [--brief] [--no-strict] [--simulate [--brief]]
       [--wait[=n]] [--force]
              Attempt to stop the resources if they are  running  and  forbid  the  cluster  from
              starting  them  again.  Depending  on  the  rest of the configuration (constraints,
              options, failures, etc), the resources  may  remain  started.  No  changes  to  the
              cluster  configuration  will  be  made  if  other than specified resources would be
              affected in any way.
              If --brief is specified, only errors are printed.
              If --no-strict is specified, no changes to the cluster configuration will  be  made
              if  other  than  specified resources would get stopped or demoted. Moving resources
              between nodes is allowed.
              If --simulate is specified, no changes to the cluster configuration  will  be  made
              and  the  effect  of  the  changes  will  be  printed  instead.  If --brief is also
              specified, only a list of affected resources not specified in the command  will  be
              printed.
              If  --wait  is specified, pcs will wait up to 'n' seconds for the resources to stop
              and then return 0 if the resources are stopped or  1  if  the  resources  have  not
              stopped. If 'n' is not specified it defaults to 60 minutes.
              If --force is specified, checks for safe disable will be skipped.

       restart <resource id> [node] [--wait=n]
              Restart  the  resource  specified.  If a node is specified and if the resource is a
              clone or bundle it will be restarted only on  the  node  specified.  If  --wait  is
              specified, then we will wait up to 'n' seconds for the resource to be restarted and
              return 0 if the restart was successful or 1 if it was not.

       debug-start <resource id> [--full]
              This command will force the specified resource to start on this node  ignoring  the
              cluster  recommendations  and  print  the output from starting the resource.  Using
              --full will give more detailed output.  This is mainly used for debugging resources
              that fail to start.

       debug-stop <resource id> [--full]
              This  command  will  force the specified resource to stop on this node ignoring the
              cluster recommendations and print the output from  stopping  the  resource.   Using
              --full will give more detailed output.  This is mainly used for debugging resources
              that fail to stop.

       debug-promote <resource id> [--full]
              This command will force the specified resource to be promoted on this node ignoring
              the  cluster  recommendations  and  print  the  output from promoting the resource.
              Using --full will give more detailed output.  This is  mainly  used  for  debugging
              resources that fail to promote.

       debug-demote <resource id> [--full]
              This  command will force the specified resource to be demoted on this node ignoring
              the cluster recommendations and print the output from demoting the resource.  Using
              --full will give more detailed output.  This is mainly used for debugging resources
              that fail to demote.

       debug-monitor <resource id> [--full]
              This command will force the  specified  resource  to  be  monitored  on  this  node
              ignoring  the  cluster  recommendations  and  print  the output from monitoring the
              resource.  Using --full will give more detailed output.  This is  mainly  used  for
              debugging resources that fail to be monitored.

       move <resource id> [destination node] [--promoted] [--strict] [--wait[=n]]
              Move  the  resource  off  the  node it is currently running on. This is achieved by
              creating a -INFINITY location constraint to ban the node. If  destination  node  is
              specified  the resource will be moved to that node by creating an INFINITY location
              constraint to prefer the destination node. The constraint  needed  for  moving  the
              resource  will  be  automatically  removed  once the resource is running on its new
              location. The command will fail in case it is  not  possible  to  verify  that  the
              resource  will  not  be  moved  back after deleting the constraint. If this happens
              after the location constraint has been created, the constraint will be left in  the
              configuration.

              If  --strict  is  specified, the command will also fail if other resources would be
              affected.

              If --promoted is used the scope of the command is limited to the Promoted role  and
              promotable clone id must be used (instead of the resource id).

              If  --wait  is  specified, pcs will wait up to 'n' seconds for the resource to move
              and then return 0 on success or 1 on error. If 'n' is not specified it defaults  to
              60 minutes.

              NOTE:  This  command  has  been  changed  in  pcs-0.11. It is equivalent to command
              'resource move <resource id> --autodelete' from pcs-0.10.9. Legacy functionality of
              the  'resource  move'  command is still available as 'resource move-with-constraint
              <resource id>'.

              If you want the resource to preferably avoid running on some nodes but be  able  to
              failover to them use 'pcs constraint location avoids'.

       move-with-constraint  <resource  id> [destination node] [lifetime=<lifetime>] [--promoted]
       [--wait[=n]]
              Move the resource off the node it is currently running on by creating  a  -INFINITY
              location  constraint to ban the node. If destination node is specified the resource
              will be moved to that node by creating an INFINITY location  constraint  to  prefer
              the destination node.

              If lifetime is specified then the constraint will expire after that time, otherwise
              it defaults to infinity and the  constraint  can  be  cleared  manually  with  'pcs
              resource clear' or 'pcs constraint delete'. Lifetime is expected to be specified as
              ISO 8601 duration (see https://en.wikipedia.org/wiki/ISO_8601#Durations).

              If --promoted is used the scope of the command is limited to the Promoted role  and
              promotable clone id must be used (instead of the resource id).

              If  --wait  is  specified, pcs will wait up to 'n' seconds for the resource to move
              and then return 0 on success or 1 on error. If 'n' is not specified it defaults  to
              60 minutes.

              If  you  want the resource to preferably avoid running on some nodes but be able to
              failover to them use 'pcs constraint location avoids'.

       ban <resource id> [node] [--promoted] [lifetime=<lifetime>] [--wait[=n]]
              Prevent the resource id specified from running on the node (or on the current  node
              it  is  running  on  if  no  node  is  specified)  by creating a -INFINITY location
              constraint.

              If --promoted is used the scope of the command is limited to the Promoted role  and
              promotable clone id must be used (instead of the resource id).

              If lifetime is specified then the constraint will expire after that time, otherwise
              it defaults to infinity and the  constraint  can  be  cleared  manually  with  'pcs
              resource clear' or 'pcs constraint delete'. Lifetime is expected to be specified as
              ISO 8601 duration (see https://en.wikipedia.org/wiki/ISO_8601#Durations).

              If --wait is specified, pcs will wait up to 'n' seconds for the  resource  to  move
              and  then return 0 on success or 1 on error. If 'n' is not specified it defaults to
              60 minutes.

              If you want the resource to preferably avoid running on some nodes but be  able  to
              failover to them use 'pcs constraint location avoids'.

       clear <resource id> [node] [--promoted] [--expired] [--wait[=n]]
              Remove  constraints  created by move and/or ban on the specified resource (and node
              if specified).

              If --promoted is used the scope of the command is limited to the Promoted role  and
              promotable clone id must be used (instead of the resource id).

              If --expired is specified, only constraints with expired lifetimes will be removed.

              If --wait is specified, pcs will wait up to 'n' seconds for the operation to finish
              (including starting and/or moving resources if appropriate) and then  return  0  on
              success or 1 on error. If 'n' is not specified it defaults to 60 minutes.

       standards
              List  available  resource agent standards supported by this installation (OCF, LSB,
              etc.).

       providers
              List available OCF resource agent providers.

       agents [standard[:provider]]
              List available agents optionally filtered by standard and provider.

       update <resource id> [resource options] [op [<operation action>  <operation  options>]...]
       [meta <meta options>] [--agent-validation] [--wait[=n]]
              Add, remove or change options of specified resource, clone or multi-state resource.
              Unspecified options will be kept unchanged. If you wish to remove an option, set it
              to empty value, i.e. 'option_name='.

              If an operation (op) is specified it will update the first found operation with the
              same action on the specified resource. If no operation with that action exists then
              a  new  operation  will  be  created. (WARNING: all existing options on the updated
              operation will be reset if not specified.) If you want to create  multiple  monitor
              operations you should use the 'op add' & 'op remove' commands.

              If --agent-validation is specified, resource agent validate-all action will be used
              to validate resource options.

              If --wait is specified, pcs will wait up to 'n' seconds for  the  changes  to  take
              effect  and then return 0 if the changes have been processed or 1 otherwise. If 'n'
              is not specified it defaults to 60 minutes.

       op add <resource id> <operation action> [operation properties]
              Add operation for specified resource.

       op delete <resource id> <operation action> [<operation properties>...]
              Remove specified operation (note: you must specify the exact  operation  properties
              to properly remove an existing operation).

       op delete <operation id>
              Remove the specified operation id.

       op remove <resource id> <operation action> [<operation properties>...]
              Remove  specified  operation (note: you must specify the exact operation properties
              to properly remove an existing operation).

       op remove <operation id>
              Remove the specified operation id.

       op defaults [config] [--all] [--full] [--no-check-expired]
              List currently configured default values for operations.  If  --all  is  specified,
              also  list  expired  sets  of  values.  If  --full  is specified, also list ids. If
              --no-expire-check is specified, do not evaluate whether sets of values are expired.

       op defaults <name>=<value>...
              Set default values for operations.
              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       op defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
              Create  a  new  set of default values for resource / stonith device operations. You
              may specify a rule describing resources / stonith devices and /  or  operations  to
              which the set applies.

              Set options are: id, score

              Expression looks like one of the following:
                op <operation name> [interval=<interval>]
                resource [<standard>]:[<provider>]:[<type>]
                defined|not_defined <node attribute>
                <node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
                date gt|lt <date>
                date in_range [<date>] to <date>
                date in_range <date> to duration <duration options>
                date-spec <date-spec options>
                <expression> and|or <expression>
                (<expression>)

              You  may  specify  all  or  any  of 'standard', 'provider' and 'type' in a resource
              expression. For example: 'resource ocf::' matches all resources of 'ocf'  standard,
              while  'resource ::Dummy' matches all resources of 'Dummy' type regardless of their
              standard and provider.

              Dates are expected to conform to ISO 8601 format.

              Duration options are: hours, monthdays, weekdays, yearsdays, months, weeks,  years,
              weekyears, moon. Value for these options is an integer.

              Date-spec options are: hours, monthdays, weekdays, yearsdays, months, weeks, years,
              weekyears, moon. Value for these options is  an  integer  or  a  range  written  as
              integer-integer.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       op defaults set delete [<set id>]...
              Delete specified options sets.

       op defaults set remove [<set id>]...
              Delete specified options sets.

       op defaults set update <set id> [meta [<name>=<value>]...]
              Add, remove or change values in specified set of  default  values  for  resource  /
              stonith  device operations. Unspecified options will be kept unchanged. If you wish
              to remove an option, set it to empty value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       op defaults update <name>=<value>...
              Add,  remove  or change default values for operations. This is a simplified command
              useful for cases when you only  manage  one  set  of  default  values.  Unspecified
              options  will  be  kept unchanged. If you wish to remove an option, set it to empty
              value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       meta <resource id | group id | clone id> <meta options> [--wait[=n]]
              Add  specified  options  to  the  specified  resource, group or clone. Meta options
              should be in the format of name=value, options may be removed by setting an  option
              without  a  value.  If --wait is specified, pcs will wait up to 'n' seconds for the
              changes to take effect and then return 0 if the changes have been  processed  or  1
              otherwise. If 'n' is not specified it defaults to 60 minutes.
              Example: pcs resource meta TestResource failure-timeout=50 resource-stickiness=

       group list
              Show all currently configured resource groups and their resources.

       group add <group id> <resource id> [resource id] ... [resource id] [--before <resource id>
       | --after <resource id>] [--wait[=n]]
              Add the specified resource to the group, creating the group if it does  not  exist.
              If  the  resource  is present in another group it is moved to the new group. If the
              group remains empty after move, it is deleted (for  cloned  groups,  the  clone  is
              deleted  as  well).  The  delete operation may fail in case the group is referenced
              within the configuration, e.g. by constraints. In  that  case,  use  'pcs  resource
              ungroup' command prior to moving all resources out of the group.

              You  can  use  --before  or  --after to specify the position of the added resources
              relatively to some resource already existing in the group. By adding resources to a
              group  they  are  already  in  and  specifying --after or --before you can move the
              resources in the group.

              If --wait is specified, pcs will wait up to 'n' seconds for the operation to finish
              (including  moving  resources  if appropriate) and then return 0 on success or 1 on
              error. If 'n' is not specified it defaults to 60 minutes.

       group delete <group id> [resource id]... [--wait[=n]]
              Remove the group (note: this does not remove any resources from the cluster) or  if
              resources  are specified, remove the specified resources from the group.  If --wait
              is specified, pcs will  wait  up  to  'n'  seconds  for  the  operation  to  finish
              (including  moving  resources  if  appropriate) and the return 0 on success or 1 on
              error.  If 'n' is not specified it defaults to 60 minutes.

       group remove <group id> [resource id]... [--wait[=n]]
              Remove the group (note: this does not remove any resources from the cluster) or  if
              resources  are specified, remove the specified resources from the group.  If --wait
              is specified, pcs will  wait  up  to  'n'  seconds  for  the  operation  to  finish
              (including  moving  resources  if  appropriate) and the return 0 on success or 1 on
              error.  If 'n' is not specified it defaults to 60 minutes.

       ungroup <group id> [resource id]... [--wait[=n]]
              Remove the group (note: this does not remove any resources from the cluster) or  if
              resources  are specified, remove the specified resources from the group.  If --wait
              is specified, pcs will  wait  up  to  'n'  seconds  for  the  operation  to  finish
              (including  moving  resources  if  appropriate) and the return 0 on success or 1 on
              error.  If 'n' is not specified it defaults to 60 minutes.

       clone <resource id | group id> [<clone id>] [meta <clone meta options>] [--wait[=n]]
              Set up the specified resource or group as a clone. If --wait is specified, pcs will
              wait  up  to  'n'  seconds  for  the  operation to finish (including starting clone
              instances if appropriate) and then return 0 on success or 1 on error. If 'n' is not
              specified it defaults to 60 minutes.

       promotable <resource id | group id> [<clone id>] [meta <clone meta options>] [--wait[=n]]
              Set  up the specified resource or group as a promotable clone. This is an alias for
              'pcs resource clone <resource id> promotable=true'.

       unclone <clone id | resource id | group id> [--wait[=n]]
              Remove the specified clone or the clone  which  contains  the  specified  group  or
              resource  (the  resource or group will not be removed). If --wait is specified, pcs
              will wait up to 'n' seconds for the operation to finish (including  stopping  clone
              instances if appropriate) and then return 0 on success or 1 on error. If 'n' is not
              specified it defaults to 60 minutes.

       bundle create <bundle  id>  container  <container  type>  [<container  options>]  [network
       <network  options>]  [port-map <port options>]... [storage-map <storage options>]... [meta
       <meta options>] [--disabled] [--wait[=n]]
              Create a new bundle encapsulating no resources. The bundle can be used either as it
              is  or  a  resource may be put into it at any time. If --disabled is specified, the
              bundle is not started automatically. If --wait is specified, pcs will  wait  up  to
              'n'  seconds for the bundle to start and then return 0 on success or 1 on error. If
              'n' is not specified it defaults to 60 minutes.

       bundle reset <bundle id>  [container  <container  options>]  [network  <network  options>]
       [port-map  <port  options>]...  [storage-map  <storage  options>]... [meta <meta options>]
       [--disabled] [--wait[=n]]
              Configure specified bundle with given options. Unlike bundle update,  this  command
              resets the bundle according given options - no previous options are kept. Resources
              inside the bundle are kept as they are. If --disabled is specified, the  bundle  is
              not  started automatically. If --wait is specified, pcs will wait up to 'n' seconds
              for the bundle to start and then return 0 on success or 1 on error. If 'n'  is  not
              specified it defaults to 60 minutes.

       bundle  update  <bundle  id>  [container  <container options>] [network <network options>]
       [port-map (add <port options>) | (delete | remove <id>...)]... [storage-map (add  <storage
       options>) | (delete | remove <id>...)]... [meta <meta options>] [--wait[=n]]
              Add, remove or change options of specified bundle. Unspecified options will be kept
              unchanged. If  you  wish  to  remove  an  option,  set  it  to  empty  value,  i.e.
              'option_name='.

              If  you wish to update a resource encapsulated in the bundle, use the 'pcs resource
              update' command instead and specify the resource id.

              If --wait is specified, pcs will wait up to 'n' seconds for the operation to finish
              (including  moving  resources  if appropriate) and then return 0 on success or 1 on
              error. If 'n' is not specified it defaults to 60 minutes.

       manage <resource id | tag id>... [--monitor]
              Set resources listed to managed mode (default). If --monitor is  specified,  enable
              all monitor operations of the resources.

       unmanage <resource id | tag id>... [--monitor]
              Set  resources  listed to unmanaged mode. When a resource is in unmanaged mode, the
              cluster is not allowed to start nor stop the resource. If --monitor  is  specified,
              disable all monitor operations of the resources.

       defaults [config] [--all] [--full] [--no-check-expired]
              List  currently configured default values for resources / stonith devices. If --all
              is specified, also list expired sets of values. If --full is specified,  also  list
              ids.  If --no-expire-check is specified, do not evaluate whether sets of values are
              expired.

       defaults <name>=<value>...
              Set default values for resources / stonith devices.
              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
              Create a new set of default values for resources / stonith devices. You may specify
              a rule describing resources / stonith devices to which the set applies.

              Set options are: id, score

              Expression looks like one of the following:
                resource [<standard>]:[<provider>]:[<type>]
                date gt|lt <date>
                date in_range [<date>] to <date>
                date in_range <date> to duration <duration options>
                date-spec <date-spec options>
                <expression> and|or <expression>
                (<expression>)

              You may specify all or any of 'standard',  'provider'  and  'type'  in  a  resource
              expression.  For example: 'resource ocf::' matches all resources of 'ocf' standard,
              while 'resource ::Dummy' matches all resources of 'Dummy' type regardless of  their
              standard and provider.

              Dates are expected to conform to ISO 8601 format.

              Duration  options are: hours, monthdays, weekdays, yearsdays, months, weeks, years,
              weekyears, moon. Value for these options is an integer.

              Date-spec options are: hours, monthdays, weekdays, yearsdays, months, weeks, years,
              weekyears,  moon.  Value  for  these  options  is  an integer or a range written as
              integer-integer.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       defaults set delete [<set id>]...
              Delete specified options sets.

       defaults set remove [<set id>]...
              Delete specified options sets.

       defaults set update <set id> [meta [<name>=<value>]...]
              Add,  remove  or  change  values in specified set of default values for resources /
              stonith devices. Unspecified options will be kept unchanged. If you wish to  remove
              an option, set it to empty value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       defaults update <name>=<value>...
              Add, remove or change default values for resources / stonith  devices.  This  is  a
              simplified command useful for cases when you only manage one set of default values.
              Unspecified options will be kept unchanged. If you wish to remove an option, set it
              to empty value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       cleanup   [<resource   id   |   stonith    id>]    [node=<node>]    [operation=<operation>
       [interval=<interval>]] [--strict]
              Make  the  cluster  forget failed operations from history of the resource / stonith
              device and re-detect its current state. This can be useful to  purge  knowledge  of
              past failures that have since been resolved.

              If  the  named  resource is part of a group, or one numbered instance of a clone or
              bundled resource, the clean-up applies to  the  whole  collective  resource  unless
              --strict is given.

              If a resource id / stonith id is not specified then all resources / stonith devices
              will be cleaned up.

              If a node is not specified then resources / stonith devices on all  nodes  will  be
              cleaned up.

       refresh [<resource id | stonith id>] [node=<node>] [--strict]
              Make  the cluster forget the complete operation history (including failures) of the
              resource / stonith device and re-detect its current state. If you are interested in
              forgetting failed operations only, use the 'pcs resource cleanup' command.

              If  the  named  resource is part of a group, or one numbered instance of a clone or
              bundled resource, the refresh applies  to  the  whole  collective  resource  unless
              --strict is given.

              If a resource id / stonith id is not specified then all resources / stonith devices
              will be refreshed.

              If a node is not specified then resources / stonith devices on all  nodes  will  be
              refreshed.

       failcount   [show  [<resource  id  |  stonith  id>]  [node=<node>]  [operation=<operation>
       [interval=<interval>]]] [--full]
              Show current failcount for resources and stonith devices, optionally filtered by  a
              resource / stonith device, node, operation and its interval. If --full is specified
              do not sum failcounts per resource / stonith device and  node.  Use  'pcs  resource
              cleanup' or 'pcs resource refresh' to reset failcounts.

       relocate dry-run [resource1] [resource2] ...
              The same as 'relocate run' but has no effect on the cluster.

       relocate run [resource1] [resource2] ...
              Relocate  specified  resources  to  their  preferred  nodes.   If  no resources are
              specified, relocate all resources.  This command calculates the preferred node  for
              each  resource  while  ignoring  resource  stickiness.   Then  it  creates location
              constraints which will cause the resources to move to their preferred nodes.   Once
              the resources have been moved the constraints are deleted automatically.  Note that
              the preferred node is calculated based  on  current  cluster  status,  constraints,
              location of resources and other settings and thus it might change over time.

       relocate show
              Display  current  status  of  resources  and  their  optimal node ignoring resource
              stickiness.

       relocate clear
              Remove all constraints created by the 'relocate run' command.

       utilization [<resource id> [<name>=<value> ...]]
              Add specified utilization  options  to  specified  resource.  If  resource  is  not
              specified,  shows  utilization  of  all  resources.  If utilization options are not
              specified, shows utilization of specified resource. Utilization option should be in
              format  name=value,  value  has to be integer. Options may be removed by setting an
              option without a value. Example: pcs resource utilization TestResource cpu=  ram=20
              For  the  utilization  configuration  to be in effect, cluster property 'placement-
              strategy' must be configured accordingly.

       relations <resource id> [--full]
              Display relations of a resource specified by its id with other resources in a  tree
              structure.  Supported  types  of  resource  relations  are:  ordering  constraints,
              ordering set constraints, relations defined by resource hierarchy (clones,  groups,
              bundles). If --full is used, more verbose output will be printed.

   cluster
       setup  <cluster  name>  (<node name> [addr=<node address>]...)... [transport knet|udp|udpu
       [<transport options>] [link <link options>]... [compression <compression options>] [crypto
       <crypto  options>]]  [totem <totem options>] [quorum <quorum options>] [--no-cluster-uuid]
       ([--enable] [--start [--wait[=<n>]]] [--no-keys-sync]) | [--corosync_conf <path>]
              Create a cluster from the listed nodes and synchronize cluster configuration  files
              to  them.  If  --corosync_conf is specified, do not connect to other nodes and save
              corosync.conf to the specified path; see 'Local only mode' below for details.

              Nodes are specified by their names and optionally their addresses. If no  addresses
              are specified for a node, pcs will configure corosync to communicate with that node
              using an address provided in 'pcs host auth' command. Otherwise, pcs will configure
              corosync to communicate with the node using the specified addresses.

              Transport knet:
              This  is  the  default  transport.  It  allows  configuring  traffic encryption and
              compression as well as using multiple addresses (links) for nodes.
              Transport options are: ip_version, knet_pmtud_interval, link_mode
              Link   options   are:   link_priority,   linknumber,   mcastport,    ping_interval,
              ping_precision, ping_timeout, pong_count, transport (udp or sctp)
              Each  'link'  followed  by options sets options for one link in the order the links
              are defined by nodes' addresses. You can set link options for  a  subset  of  links
              using a linknumber. See examples below.
              Compression options are: level, model, threshold
              Crypto options are: cipher, hash, model
              By  default,  encryption  is enabled with cipher=aes256 and hash=sha256. To disable
              encryption, set cipher=none and hash=none.

              Transports udp and udpu:
              These transports are limited to one address per node. They do not  support  traffic
              encryption nor compression.
              Transport options are: ip_version, netmtu
              Link options are: bindnetaddr, broadcast, mcastaddr, mcastport, ttl

              Totem and quorum can be configured regardless of used transport.
              Totem  options  are:  block_unlisted_ips,  consensus,  downcheck,  fail_recv_const,
              heartbeat_failures_allowed, hold,  join,  max_messages,  max_network_delay,  merge,
              miss_count_const,   send_join,   seqno_unchanged_const,  token,  token_coefficient,
              token_retransmit, token_retransmits_before_loss_const, window_size
              Quorum options are: auto_tie_breaker, last_man_standing,  last_man_standing_window,
              wait_for_all

              Transports  and  their options, link, compression, crypto and totem options are all
              documented in corosync.conf(5) man page; knet link  options  are  prefixed  'knet_'
              there,  compression options are prefixed 'knet_compression_' and crypto options are
              prefixed 'crypto_'. Quorum options are documented in votequorum(5) man page.

              --no-cluster-uuid will not generate a unique ID  for  the  cluster.  --enable  will
              configure  the cluster to start on nodes boot. --start will start the cluster right
              after creating it. --wait will wait up to 'n' seconds for  the  cluster  to  start.
              --no-keys-sync will skip creating and distributing pcsd SSL certificate and key and
              corosync and pacemaker authkey files. Use this if you provide your own certificates
              and keys.

              Local only mode:
              By  default,  pcs connects to all specified nodes to verify they can be used in the
              new cluster and to send cluster configuration files to them. If this  is  not  what
              you  want,  specify  --corosync_conf  option followed by a file path. Pcs will save
              corosync.conf to the specified file and will not connect to  cluster  nodes.  These
              are the tasks that pcs skips in that case:
              * make sure the nodes are not running or configured to run a cluster already
              *  make  sure  cluster  packages  are installed on all nodes and their versions are
              compatible
              * make sure there are no cluster configuration files on any node (run 'pcs  cluster
              destroy' and remove pcs_settings.conf file on all nodes)
              *   synchronize   corosync   and   pacemaker  authkeys,  /etc/corosync/authkey  and
              /etc/pacemaker/authkey respectively, and the corosync.conf file
              * authenticate the cluster nodes against each other ('pcs  cluster  auth'  or  'pcs
              host auth' command)
              * synchronize pcsd certificates (so that pcs web UI can be used in an HA mode)

              Examples:
              Create a cluster with default settings:
                  pcs cluster setup newcluster node1 node2
              Create a cluster using two links:
                  pcs   cluster   setup  newcluster  node1  addr=10.0.1.11  addr=10.0.2.11  node2
              addr=10.0.1.12 addr=10.0.2.12
              Set link options for all links. Link options are matched to the links in order. The
              first  link  (link  0)  has  sctp transport, the second link (link 1) has mcastport
              55405:
                  pcs  cluster  setup  newcluster  node1  addr=10.0.1.11   addr=10.0.2.11   node2
              addr=10.0.1.12    addr=10.0.2.12    transport   knet   link   transport=sctp   link
              mcastport=55405
              Set link options for the second and fourth links only. Link options are matched  to
              the links based on the linknumber option (the first link is link 0):
                  pcs cluster setup newcluster node1 addr=10.0.1.11 addr=10.0.2.11 addr=10.0.3.11
              addr=10.0.4.11 node2 addr=10.0.1.12  addr=10.0.2.12  addr=10.0.3.12  addr=10.0.4.12
              transport knet link linknumber=3 mcastport=55405 link linknumber=1 transport=sctp
              Create a cluster using udp transport with a non-default port:
                  pcs cluster setup newcluster node1 node2 transport udp link mcastport=55405

       config [show] [--output-format text|cmd|json] [--corosync_conf <path>]
              Show  cluster configuration. There are 3 formats of output available: 'cmd', 'json'
              and 'text', default is 'text'. Format 'text' is a  human  friendly  output.  Format
              'cmd'  prints  pcs  commands  which can be used to recreate the same configuration.
              Format 'json' is a machine oriented output of the configuration. If --corosync_conf
              is specified, configuration file specified by <path> is used instead of the current
              cluster configuration.

       config update [transport <transport options>] [compression <compression options>]  [crypto
       <crypto options>] [totem <totem options>] [--corosync_conf <path>]
              Update  cluster  configuration.  Unspecified options will be kept unchanged. If you
              wish to remove an option, set it to empty value, i.e. 'option_name='.

              If --corosync_conf is specified, update cluster configuration in a  file  specified
              by <path>.

              All  options  are  documented  in  corosync.conf(5)  man  page. There are different
              transport options for transport types. Compression  and  crypto  options  are  only
              available  for knet transport. Totem options can be set regardless of the transport
              type.
              Transport  options  for  knet  transport  are:   ip_version,   knet_pmtud_interval,
              link_mode
              Transport options for udp and updu transports are: ip_version, netmtu
              Compression options are: level, model, threshold
              Crypto options are: cipher, hash, model
              Totem  options  are:  block_unlisted_ips,  consensus,  downcheck,  fail_recv_const,
              heartbeat_failures_allowed, hold,  join,  max_messages,  max_network_delay,  merge,
              miss_count_const,   send_join,   seqno_unchanged_const,  token,  token_coefficient,
              token_retransmit, token_retransmits_before_loss_const, window_size

       config uuid generate [--corosync_conf <path>] [--force]
              Generate a new cluster UUID and distribute it to all cluster nodes. Cluster UUID is
              not  used  by  the  cluster  stack in any way, it is provided to easily distinguish
              between multiple clusters in a multi-cluster environment  since  the  cluster  name
              does not have to be unique.

              If  --corosync_conf is specified, update cluster configuration in file specified by
              <path>.

              If --force is specified, existing UUID will be overwritten.

       authkey corosync [<path>]
              Generate a new corosync authkey and distribute it to all cluster nodes.  If  <path>
              is specified, do not generate a key and use key from the file.

       start [--all | <node>... ] [--wait[=<n>]] [--request-timeout=<seconds>]
              Start  a  cluster  on  specified  node(s).  If  no nodes are specified then start a
              cluster on the local node. If --all is specified then start a cluster on all nodes.
              If the cluster has many nodes then the start request may time out. In that case you
              should consider setting  --request-timeout  to  a  suitable  value.  If  --wait  is
              specified,  pcs  waits  up  to  'n' seconds for the cluster to get ready to provide
              services after the cluster has successfully started.

       stop [--all | <node>... ] [--request-timeout=<seconds>]
              Stop a cluster on specified node(s). If no nodes are specified then stop a  cluster
              on  the  local node. If --all is specified then stop a cluster on all nodes. If the
              cluster is running resources which take long time to stop then the stop request may
              time  out  before  the  cluster  actually  stops.  In that case you should consider
              setting --request-timeout to a suitable value.

       kill   Force corosync and pacemaker daemons to stop on the local node (performs kill  -9).
              Note  that  init  system  (e.g. systemd) can detect that cluster is not running and
              start it again. If you want to stop cluster on a node, run pcs cluster stop on that
              node.

       enable [--all | <node>... ]
              Configure  cluster  to  run  on  node  boot  on  specified  node(s). If node is not
              specified then cluster is enabled on the local node. If  --all  is  specified  then
              cluster is enabled on all nodes.

       disable [--all | <node>... ]
              Configure  cluster  to  not  run  on node boot on specified node(s). If node is not
              specified then cluster is disabled on the local node. If --all  is  specified  then
              cluster is disabled on all nodes.

       auth [-u <username>] [-p <password>]
              Authenticate pcs/pcsd to pcsd on nodes configured in the local cluster.

       status View current cluster status (an alias of 'pcs status cluster').

       sync   Sync  cluster  configuration  (files which are supported by all subcommands of this
              command) to all cluster nodes.

       sync corosync
              Sync corosync configuration to all nodes found from current corosync.conf file.

       cib [filename] [scope=<scope> | --config]
              Get the raw xml from the CIB (Cluster Information Base). If a filename is provided,
              we  save the CIB to that file, otherwise the CIB is printed. Specify scope to get a
              specific section of  the  CIB.  Valid  values  of  the  scope  are:  acls,  alerts,
              configuration,   constraints,  crm_config,  fencing-topology,  nodes,  op_defaults,
              resources, rsc_defaults, tags. --config is the same as scope=configuration. Do  not
              specify a scope if you want to edit the saved CIB using pcs (pcs -f <command>).

       cib-push  <filename>  [--wait[=<n>]]  [diff-against=<filename_original>  | scope=<scope> |
       --config]
              Push the raw xml from <filename> to the CIB (Cluster  Information  Base).  You  can
              obtain the CIB by running the 'pcs cluster cib' command, which is recommended first
              step when you want to perform desired modifications  (pcs  -f  <command>)  for  the
              one-off push.
              If  diff-against  is  specified, pcs diffs contents of filename against contents of
              filename_original and pushes the result to the CIB.
              Specify scope to push a specific section of the CIB. Valid values of the scope are:
              acls,  alerts,  configuration,  constraints,  crm_config,  fencing-topology, nodes,
              op_defaults,   resources,   rsc_defaults,   tags.   --config   is   the   same   as
              scope=configuration.  Use of --config is recommended. Do not specify a scope if you
              need to push the whole CIB or be warned in the case of outdated CIB.
              If --wait is specified wait up to 'n' seconds for changes to be applied.
              WARNING: the selected scope of the CIB will be overwritten by the  current  content
              of the specified file.

              Example:
                  pcs cluster cib > original.xml
                  cp original.xml new.xml
                  pcs -f new.xml constraint location apache prefers node2
                  pcs cluster cib-push new.xml diff-against=original.xml

       cib-upgrade
              Upgrade the CIB to conform to the latest version of the document schema.

       edit [scope=<scope> | --config]
              Edit  the  cib in the editor specified by the $EDITOR environment variable and push
              out any changes upon saving. Specify scope to edit a specific section of  the  CIB.
              Valid   values   of  the  scope  are:  acls,  alerts,  configuration,  constraints,
              crm_config, fencing-topology, nodes, op_defaults,  resources,  rsc_defaults,  tags.
              --config is the same as scope=configuration. Use of --config is recommended. Do not
              specify a scope if you need to edit the whole CIB or  be  warned  in  the  case  of
              outdated CIB.

       node  add  <node  name>  [addr=<node  address>]... [watchdog=<watchdog path>] [device=<SBD
       device path>]... [--start [--wait[=<n>]]] [--enable] [--no-watchdog-validation]
              Add the node to the cluster and synchronize all relevant configuration files to the
              new node. This command can only be run on an existing cluster node.

              The new node is specified by its name and optionally its addresses. If no addresses
              are specified for the node, pcs will configure corosync  to  communicate  with  the
              node  using  an  address  provided  in 'pcs host auth' command. Otherwise, pcs will
              configure corosync to communicate with the node using the specified addresses.

              Use 'watchdog' to specify a path to a watchdog on the new node, when SBD is enabled
              in  the  cluster. If SBD is configured with shared storage, use 'device' to specify
              path to shared device(s) on the new node.

              If --start is specified also start cluster on the new node, if --wait is  specified
              wait  up  to  'n'  seconds  for  the  new  node  to start. If --enable is specified
              configure cluster to start on the new node on boot. If --no-watchdog-validation  is
              specified, validation of watchdog will be skipped.

              WARNING: By default, it is tested whether the specified watchdog is supported. This
              may cause a restart of the system when a watchdog with  no-way-out-feature  enabled
              is present. Use --no-watchdog-validation to skip watchdog validation.

       node delete <node name> [<node name>]...
              Shutdown specified nodes and remove them from the cluster.

       node remove <node name> [<node name>]...
              Shutdown specified nodes and remove them from the cluster.

       node  add-remote  <node name> [<node address>] [options] [op <operation action> <operation
       options> [<operation action> <operation options>]...] [meta <meta options>] [--wait[=<n>]]
              Add the node to the cluster as a remote node. Sync all relevant configuration files
              to  the  new  node.  Start  the node and configure it to start the cluster on boot.
              Options  are  port  and  reconnect_interval.  Operations  and  meta  belong  to  an
              underlying  connection  resource  (ocf:pacemaker:remote).  If  node  address is not
              specified for the node, pcs will configure pacemaker to communicate with  the  node
              using an address provided in 'pcs host auth' command. Otherwise, pcs will configure
              pacemaker to communicate with the node using the specified addresses. If --wait  is
              specified, wait up to 'n' seconds for the node to start.

       node delete-remote <node identifier>
              Shutdown  specified remote node and remove it from the cluster. The node-identifier
              can be the name of the node or the address of the node.

       node remove-remote <node identifier>
              Shutdown specified remote node and remove it from the cluster. The  node-identifier
              can be the name of the node or the address of the node.

       node add-guest <node name> <resource id> [options] [--wait[=<n>]]
              Make  the specified resource a guest node resource. Sync all relevant configuration
              files to the new node. Start the node and configure it  to  start  the  cluster  on
              boot.   Options   are   remote-addr,  remote-port  and  remote-connect-timeout.  If
              remote-addr is not  specified  for  the  node,  pcs  will  configure  pacemaker  to
              communicate  with  the  node  using an address provided in 'pcs host auth' command.
              Otherwise, pcs will configure pacemaker to communicate  with  the  node  using  the
              specified addresses. If --wait is specified, wait up to 'n' seconds for the node to
              start.

       node delete-guest <node identifier>
              Shutdown specified guest node and remove it from the cluster.  The  node-identifier
              can  be  the name of the node or the address of the node or id of the resource that
              is used as the guest node.

       node remove-guest <node identifier>
              Shutdown specified guest node and remove it from the cluster.  The  node-identifier
              can  be  the name of the node or the address of the node or id of the resource that
              is used as the guest node.

       node clear <node name>
              Remove specified node from various cluster caches. Use this if a  removed  node  is
              still considered by the cluster to be a member of the cluster.

       link add <node_name>=<node_address>... [options <link options>]
              Add  a  corosync  link.  One address must be specified for each cluster node. If no
              linknumber is specified, pcs will use the lowest available linknumber.
              Link  options  (documented  in  corosync.conf(5)  man  page)  are:   link_priority,
              linknumber,  mcastport,  ping_interval,  ping_precision,  ping_timeout, pong_count,
              transport (udp or sctp)

       link delete <linknumber> [<linknumber>]...
              Remove specified corosync links.

       link remove <linknumber> [<linknumber>]...
              Remove specified corosync links.

       link update <linknumber> [<node_name>=<node_address>...] [options <link options>]
              Add, remove or change node addresses / link options of an existing  corosync  link.
              Use  this  if you cannot add / remove links which is the preferred way. Unspecified
              options will be kept unchanged. If you wish to remove an option, set  it  to  empty
              value, i.e. 'option_name='.
              Link options (documented in corosync.conf(5) man page) are:
              for   knet  transport:  link_priority,  mcastport,  ping_interval,  ping_precision,
              ping_timeout, pong_count, transport (udp or sctp)
              for udp and udpu transports: bindnetaddr, broadcast, mcastaddr, mcastport, ttl

       uidgid List the current configured uids and gids of users allowed to connect to corosync.

       uidgid add [uid=<uid>] [gid=<gid>]
              Add the specified uid and/or gid to the list of users/groups allowed to connect  to
              corosync.

       uidgid delete [uid=<uid>] [gid=<gid>]
              Remove  the  specified  uid  and/or  gid  from  the list of users/groups allowed to
              connect to corosync.

       uidgid remove [uid=<uid>] [gid=<gid>]
              Remove the specified uid and/or gid  from  the  list  of  users/groups  allowed  to
              connect to corosync.

       corosync [node]
              Get  the corosync.conf from the specified node or from the current node if node not
              specified.

       reload corosync
              Reload the corosync configuration on the current node.

       destroy [--all] [--force]
              Permanently destroy the cluster on the current node, killing all cluster  processes
              and  removing  all cluster configuration files. Using --all will attempt to destroy
              the cluster on all nodes in the local cluster.

              WARNING: This command permanently removes any cluster configuration that  has  been
              created. It is recommended to run 'pcs cluster stop' before destroying the cluster.
              To prevent accidental running of this command, --force or interactive user response
              is required in order to proceed.

       verify [--full] [-f <filename>]
              Checks  the  pacemaker configuration (CIB) for syntax and common conceptual errors.
              If no filename is specified  the  check  is  performed  on  the  currently  running
              cluster. If --full is used more verbose output will be printed.

       report [--from "YYYY-M-D H:M:S" [--to "YYYY-M-D H:M:S"]] <dest>
              Create  a tarball containing everything needed when reporting cluster problems.  If
              --from and --to are not used, the report will include the past 24 hours.

   stonith
       [status [<resource id | tag id>] [node=<node>] [--hide-inactive]]
              Show status of all currently configured  stonith  devices.  If  --hide-inactive  is
              specified,  only show active stonith devices. If a resource or tag id is specified,
              only show status of the specified resource or resources in the  specified  tag.  If
              node is specified, only show status of resources configured for the specified node.

       config [--output-format text|cmd|json] [<stonith id>]...
              Show  options  of all currently configured stonith devices or if stonith device ids
              are specified show the options for the specified stonith device ids.  There  are  3
              formats  of  output  available: 'cmd', 'json' and 'text', default is 'text'. Format
              'text' is a human friendly output. Format 'cmd' prints pcs commands  which  can  be
              used to recreate the same configuration. Format 'json' is a machine oriented output
              of the configuration.

       list [filter] [--nodesc]
              Show list of all available stonith agents (if filter is provided then only  stonith
              agents matching the filter will be shown). If --nodesc is used then descriptions of
              stonith agents are not printed.

       describe <stonith agent> [--full]
              Show options for specified stonith agent.  If  --full  is  specified,  all  options
              including advanced and deprecated ones are shown.

       create  <stonith id> <stonith device type> [stonith device options] [op <operation action>
       <operation options> [<operation action> <operation  options>]...]  [meta  <meta  options>]
       [--group  <group  id>  [--before  <stonith  id>  |  --after  <stonith  id>]]  [--disabled]
       [--agent-validation] [--wait[=n]]
              Create stonith device with specified type and options. If --group is specified  the
              stonith  device  is  added  to  the group named. You can use --before or --after to
              specify the position of the added stonith device relatively to some stonith  device
              already  existing in the group. If--disabled is specified the stonith device is not
              used. If --agent-validation is specified, stonith agent validate-all action will be
              used  to  validate stonith device options. If --wait is specified, pcs will wait up
              to 'n' seconds for the stonith device to start and then return  0  if  the  stonith
              device  is  started,  or 1 if the stonith device has not yet started. If 'n' is not
              specified it defaults to 60 minutes.

              Example: Create a device for nodes node1 and node2
              pcs stonith create MyFence fence_virt pcmk_host_list=node1,node2
              Example: Use port p1 for node n1 and ports p2 and p3 for node n2
              pcs stonith create MyFence fence_virt 'pcmk_host_map=n1:p1;n2:p2,p3'

       update <stonith id> [stonith options] [op  [<operation  action>  <operation  options>]...]
       [meta <meta options>] [--agent-validation] [--wait[=n]]
              Add, remove or change options of specified stonith device. Unspecified options will
              be kept unchanged. If you wish to remove an option, set it  to  empty  value,  i.e.
              'option_name='.

              If an operation (op) is specified it will update the first found operation with the
              same action on the specified stonith device.  If  no  operation  with  that  action
              exists  then a new operation will be created. (WARNING: all existing options on the
              updated operation will be reset if not specified.) If you want to  create  multiple
              monitor operations you should use the 'op add' & 'op remove' commands.

              If  --agent-validation is specified, stonith agent validate-all action will be used
              to validate stonith device options.

              If --wait is specified, pcs will wait up to 'n' seconds for  the  changes  to  take
              effect  and then return 0 if the changes have been processed or 1 otherwise. If 'n'
              is not specified it defaults to 60 minutes.

       update-scsi-devices  <stonith  id>   (set   <device-path>   [<device-path>...])   |   (add
       <device-path> [<device-path>...] delete|remove <device-path> [<device-path>...] )
              Update  scsi  fencing  devices  without affecting other resources. You must specify
              either list of set devices or at least one device for add or delete/remove devices.
              Stonith  resource must be running on one cluster node. Each device will be unfenced
              on  each  cluster  node  running  cluster.  Supported  fence  agents:   fence_scsi,
              fence_mpath.

       delete <stonith id>
              Remove stonith id from configuration.

       remove <stonith id>
              Remove stonith id from configuration.

       op add <stonith id> <operation action> [operation properties]
              Add operation for specified stonith device.

       op delete <stonith id> <operation action> [<operation properties>...]
              Remove  specified  operation (note: you must specify the exact operation properties
              to properly remove an existing operation).

       op delete <operation id>
              Remove the specified operation id.

       op remove <stonith id> <operation action> [<operation properties>...]
              Remove specified operation (note: you must specify the exact  operation  properties
              to properly remove an existing operation).

       op remove <operation id>
              Remove the specified operation id.

       op defaults [config] [--all] [--full] [--no-check-expired]
              This command is an alias of 'resource op defaults [config]' command.

              List  currently  configured  default  values for operations. If --all is specified,
              also list expired sets of values.  If  --full  is  specified,  also  list  ids.  If
              --no-expire-check is specified, do not evaluate whether sets of values are expired.

       op defaults <name>=<value>...
              This command is an alias of 'resource op defaults' command.

              Set default values for operations.
              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       op defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
              This command is an alias of 'resource op defaults set create' command.

              Create a new set of default values for resource / stonith  device  operations.  You
              may  specify  a  rule describing resources / stonith devices and / or operations to
              which the set applies.

              Set options are: id, score

              Expression looks like one of the following:
                op <operation name> [interval=<interval>]
                resource [<standard>]:[<provider>]:[<type>]
                defined|not_defined <node attribute>
                <node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
                date gt|lt <date>
                date in_range [<date>] to <date>
                date in_range <date> to duration <duration options>
                date-spec <date-spec options>
                <expression> and|or <expression>
                (<expression>)

              You may specify all or any of 'standard',  'provider'  and  'type'  in  a  resource
              expression.  For example: 'resource ocf::' matches all resources of 'ocf' standard,
              while 'resource ::Dummy' matches all resources of 'Dummy' type regardless of  their
              standard and provider.

              Dates are expected to conform to ISO 8601 format.

              Duration  options are: hours, monthdays, weekdays, yearsdays, months, weeks, years,
              weekyears, moon. Value for these options is an integer.

              Date-spec options are: hours, monthdays, weekdays, yearsdays, months, weeks, years,
              weekyears,  moon.  Value  for  these  options  is  an integer or a range written as
              integer-integer.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       op defaults set delete [<set id>]...
              This command is an alias of 'resource op defaults set delete' command.

              Delete specified options sets.

       op defaults set remove [<set id>]...
              This command is an alias of 'resource op defaults set delete' command.

              Delete specified options sets.

       op defaults set update <set id> [meta [<name>=<value>]...]
              This command is an alias of 'resource op defaults set update' command.

              Add,  remove  or  change  values  in specified set of default values for resource /
              stonith device operations. Unspecified options will be kept unchanged. If you  wish
              to remove an option, set it to empty value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       op defaults update <name>=<value>...
              This command is an alias of 'resource op defaults update' command.

              Add, remove or change default values for operations. This is a  simplified  command
              useful  for  cases  when  you  only  manage  one set of default values. Unspecified
              options will be kept unchanged. If you wish to remove an option, set  it  to  empty
              value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       meta <stonith id> <meta options> [--wait[=n]]
              Add specified options to the specified stonith device. Meta options  should  be  in
              the  format  of  name=value,  options may be removed by setting an option without a
              value. If --wait is specified, pcs will wait up to 'n' seconds for the  changes  to
              take effect and then return 0 if the changes have been processed or 1 otherwise. If
              'n' is not specified it defaults to 60 minutes.

              Example: pcs stonith meta test_stonith failure-timeout=50 resource-stickiness=

       defaults [config] [--all] [--full] [--no-check-expired]
              This command is an alias of 'resource defaults [config]' command.

              List currently configured default values for resources / stonith devices. If  --all
              is  specified,  also list expired sets of values. If --full is specified, also list
              ids. If --no-expire-check is specified, do not evaluate whether sets of values  are
              expired.

       defaults <name>=<value>...
              This command is an alias of 'resource defaults' command.

              Set default values for resources / stonith devices.
              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       defaults set create [<set options>] [meta [<name>=<value>]...] [rule [<expression>]]
              This command is an alias of 'resource defaults set create' command.

              Create a new set of default values for resources / stonith devices. You may specify
              a rule describing resources / stonith devices to which the set applies.

              Set options are: id, score

              Expression looks like one of the following:
                resource [<standard>]:[<provider>]:[<type>]
                date gt|lt <date>
                date in_range [<date>] to <date>
                date in_range <date> to duration <duration options>
                date-spec <date-spec options>
                <expression> and|or <expression>
                (<expression>)

              You  may  specify  all  or  any  of 'standard', 'provider' and 'type' in a resource
              expression. For example: 'resource ocf::' matches all resources of 'ocf'  standard,
              while  'resource ::Dummy' matches all resources of 'Dummy' type regardless of their
              standard and provider.

              Dates are expected to conform to ISO 8601 format.

              Duration options are: hours, monthdays, weekdays, yearsdays, months, weeks,  years,
              weekyears, moon. Value for these options is an integer.

              Date-spec options are: hours, monthdays, weekdays, yearsdays, months, weeks, years,
              weekyears, moon. Value for these options is  an  integer  or  a  range  written  as
              integer-integer.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       defaults set delete [<set id>]...
              This command is an alias of 'resource defaults set delete' command.

              Delete specified options sets.

       defaults set remove [<set id>]...
              This command is an alias of 'resource defaults set delete' command.

              Delete specified options sets.

       defaults set update <set id> [meta [<name>=<value>]...]
              This command is an alias of 'resource defaults set update' command.

              Add, remove or change values in specified set of default  values  for  resources  /
              stonith  devices. Unspecified options will be kept unchanged. If you wish to remove
              an option, set it to empty value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       defaults update <name>=<value>...
              This command is an alias of 'resource defaults update' command.

              Add,  remove  or  change  default values for resources / stonith devices. This is a
              simplified command useful for cases when you only manage one set of default values.
              Unspecified options will be kept unchanged. If you wish to remove an option, set it
              to empty value, i.e. 'option_name='.

              NOTE: Defaults do not apply to resources / stonith devices which override them with
              their own defined values.

       cleanup    [<resource    id    |   stonith   id>]   [node=<node>]   [operation=<operation>
       [interval=<interval>]] [--strict]
              This command is an alias of 'resource cleanup' command.

              Make the cluster forget failed operations from history of the  resource  /  stonith
              device  and  re-detect  its current state. This can be useful to purge knowledge of
              past failures that have since been resolved.

              If the named resource is part of a group, or one numbered instance of  a  clone  or
              bundled  resource,  the  clean-up  applies  to the whole collective resource unless
              --strict is given.

              If a resource id / stonith id is not specified then all resources / stonith devices
              will be cleaned up.

              If  a  node  is not specified then resources / stonith devices on all nodes will be
              cleaned up.

       refresh [<resource id | stonith id>] [node=<node>] [--strict]
              This command is an alias of 'resource refresh' command.

              Make the cluster forget the complete operation history (including failures) of  the
              resource / stonith device and re-detect its current state. If you are interested in
              forgetting failed operations only, use the 'pcs resource cleanup' command.

              If the named resource is part of a group, or one numbered instance of  a  clone  or
              bundled  resource,  the  refresh  applies  to  the whole collective resource unless
              --strict is given.

              If a resource id / stonith id is not specified then all resources / stonith devices
              will be refreshed.

              If  a  node  is not specified then resources / stonith devices on all nodes will be
              refreshed.

       failcount  [show  [<resource  id  |  stonith  id>]  [node=<node>]   [operation=<operation>
       [interval=<interval>]]] [--full]
              This command is an alias of 'resource failcount show' command.

              Show  current failcount for resources and stonith devices, optionally filtered by a
              resource / stonith device, node, operation and its interval. If --full is specified
              do  not  sum  failcounts  per resource / stonith device and node. Use 'pcs resource
              cleanup' or 'pcs resource refresh' to reset failcounts.

       enable <stonith id>... [--wait[=n]]
              Allow the cluster to use the stonith devices. If --wait is specified, pcs will wait
              up to 'n' seconds for the stonith devices to start and then return 0 if the stonith
              devices are started, or 1 if the stonith devices have not yet started.  If  'n'  is
              not specified it defaults to 60 minutes.

       disable <stonith id>... [--wait[=n]]
              Attempt to stop the stonith devices if they are running and disallow the cluster to
              use them. If --wait is specified, pcs will wait up to 'n' seconds for  the  stonith
              devices  to  stop  and then return 0 if the stonith devices are stopped or 1 if the
              stonith devices have not stopped. If  'n'  is  not  specified  it  defaults  to  60
              minutes.

       level [config]
              Lists all of the fencing levels currently configured.

       level add <level> <target> <stonith id> [stonith id]...
              Add  the fencing level for the specified target with the list of stonith devices to
              attempt for that target at that level. Fence  levels  are  attempted  in  numerical
              order  (starting with 1). If a level succeeds (meaning all devices are successfully
              fenced in that level) then no other levels are tried, and the target is  considered
              fenced.  Target may be a node name <node_name> or %<node_name> or node%<node_name>,
              a node name regular expression regexp%<node_pattern>  or  a  node  attribute  value
              attrib%<name>=<value>.

       level delete <level> [target <target>] [stonith <stonith id>...]
              Removes  the  fence  level  for  the  level, target and/or devices specified. If no
              target or devices are specified then the fence level is removed. Target  may  be  a
              node  name  <node_name>  or  %<node_name>  or node%<node_name>, a node name regular
              expression regexp%<node_pattern> or a node attribute value attrib%<name>=<value>.

       level remove <level> [target <target>] [stonith <stonith id>...]
              Removes the fence level for the level,  target  and/or  devices  specified.  If  no
              target  or  devices  are specified then the fence level is removed. Target may be a
              node name <node_name> or %<node_name> or  node%<node_name>,  a  node  name  regular
              expression regexp%<node_pattern> or a node attribute value attrib%<name>=<value>.

       level clear [target <target> | stonith <stonith id>...]
              Clears the fence levels on the target (or stonith id) specified or clears all fence
              levels if a target/stonith  id  is  not  specified.  Target  may  be  a  node  name
              <node_name>  or  %<node_name>  or  node%<node_name>, a node name regular expression
              regexp%<node_pattern> or a node attribute value attrib%<name>=<value>. Example: pcs
              stonith level clear stonith dev_a dev_b

       level verify
              Verifies all fence devices and nodes specified in fence levels exist.

       fence <node> [--off]
              Fence  the node specified (if --off is specified, use the 'off' API call to stonith
              which will turn the node off instead of rebooting it).

       confirm <node> [--force]
              Confirm to the cluster that the specified node is  powered  off.  This  allows  the
              cluster  to  recover  from a situation where no stonith device is able to fence the
              node. This command should ONLY be used after manually ensuring  that  the  node  is
              powered off and has no access to shared resources.

              WARNING:  If this node is not actually powered off or it does have access to shared
              resources, data corruption/cluster failure can occur. To prevent accidental running
              of  this  command,  --force  or  interactive  user response is required in order to
              proceed.

              NOTE: It is not checked if the specified node exists in the cluster in order to  be
              able to work with nodes not visible from the local cluster partition.

       history [show [<node>]]
              Show fencing history for the specified node or all nodes if no node specified.

       history cleanup [<node>]
              Cleanup fence history of the specified node or all nodes if no node specified.

       history update
              Update fence history from all nodes.

       sbd         enable        [watchdog=<path>[@<node>]]...        [device=<path>[@<node>]]...
       [<SBD_OPTION>=<value>]... [--no-watchdog-validation]
              Enable SBD in cluster. Default path for watchdog device is  /dev/watchdog.  Allowed
              SBD  options:  SBD_WATCHDOG_TIMEOUT  (default:  5),  SBD_DELAY_START (default: no),
              SBD_STARTMODE (default: always) and SBD_TIMEOUT_ACTION. SBD options are  documented
              in  sbd(8)  man  page.  It  is  possible  to  specify  up to 3 devices per node. If
              --no-watchdog-validation is specified, validation of watchdogs will be skipped.

              WARNING: Cluster has to be restarted in order to apply these changes.

              WARNING: By default, it is tested whether the specified watchdog is supported. This
              may  cause  a restart of the system when a watchdog with no-way-out-feature enabled
              is present. Use --no-watchdog-validation to skip watchdog validation.

              Example of enabling SBD in cluster with watchdogs on node1 will be  /dev/watchdog2,
              on  node2  /dev/watchdog1,  /dev/watchdog0  on  all other nodes, device /dev/sdb on
              node1, device /dev/sda on all other nodes and watchdog timeout will bet set  to  10
              seconds:

              pcs  stonith sbd enable watchdog=/dev/watchdog2@node1 watchdog=/dev/watchdog1@node2
              watchdog=/dev/watchdog0            device=/dev/sdb@node1            device=/dev/sda
              SBD_WATCHDOG_TIMEOUT=10

       sbd disable
              Disable SBD in cluster.

              WARNING: Cluster has to be restarted in order to apply these changes.

       sbd    device    setup   device=<path>   [device=<path>]...   [watchdog-timeout=<integer>]
       [allocate-timeout=<integer>] [loop-timeout=<integer>] [msgwait-timeout=<integer>]
              Initialize SBD structures on device(s) with specified timeouts.

              WARNING: All content on device(s) will be overwritten.

       sbd device message <device-path> <node> <message-type>
              Manually set a message of the specified type on the device for the  node.  Possible
              message  types  (they  are  documented  in  sbd(8)  man  page):  test,  reset, off,
              crashdump, exit, clear

       sbd status [--full]
              Show status of SBD services in cluster and local device(s) configured. If --full is
              specified, also dump of SBD headers on device(s) will be shown.

       sbd config
              Show SBD configuration in cluster.

       sbd watchdog list
              Show all available watchdog devices on the local node.

              WARNING:  Listing  available  watchdogs  may  cause  a restart of the system when a
              watchdog with no-way-out-feature enabled is present.

       sbd watchdog test [<watchdog-path>]
              This operation is expected to force-reboot the local system without  following  any
              shutdown  procedures  using  a  watchdog.  If  no  watchdog is specified, available
              watchdog will be used if only one watchdog device is available on the local system.

   acl
       [config]
              List all current access control lists.

       enable Enable access control lists.

       disable
              Disable access control lists.

       role create <role id> [description=<description>] [((read | write | deny) (xpath <query> |
       id <id>))...]
              Create  a role with the id and (optional) description specified. Each role can also
              have an unlimited number of permissions  (read/write/deny)  applied  to  either  an
              xpath query or the id of a specific element in the cib.
              Permissions  are  applied  to  the  selected  XML element's entire XML subtree (all
              elements enclosed within it).  Write  permission  grants  the  ability  to  create,
              modify,  or  remove the element and its subtree, and also the ability to create any
              "scaffolding" elements (enclosing elements that do not have attributes  other  than
              an  ID).  Permissions  for more specific matches (more deeply nested elements) take
              precedence over more general ones. If multiple permissions are configured  for  the
              same  match  (for  example,  in different roles applied to the same user), any deny
              permission takes precedence, then write, then lastly read.
              An xpath may include an attribute expression to select only elements that match the
              expression,  but  the  permission  still  applies  to  the  entire element (and its
              subtree), not to the attribute alone. For example, using the xpath "//*[@name]"  to
              give write permission would allow changes to the entirety of all elements that have
              a "name" attribute and everything enclosed by  those  elements.  There  is  no  way
              currently to give permissions for just one attribute of an element. That is to say,
              you can not define an ACL that allows someone to read just the dc-uuid attribute of
              the  cib tag - that would select the cib element and give read access to the entire
              CIB.

       role delete <role id>
              Delete the role specified and remove it from any users/groups it was assigned to.

       role remove <role id>
              Delete the role specified and remove it from any users/groups it was assigned to.

       role assign <role id> [to] [user|group] <username/group>
              Assign a role to a user or group already created with 'pcs acl user/group  create'.
              If there is user and group with the same id and it is not specified which should be
              used, user will be prioritized. In cases like this specify whenever user  or  group
              should be used.

       role unassign <role id> [from] [user|group] <username/group>
              Remove  a role from the specified user. If there is user and group with the same id
              and it is not specified which should be used, user will be  prioritized.  In  cases
              like this specify whenever user or group should be used.

       user create <username> [<role id>]...
              Create an ACL for the user specified and assign roles to the user.

       user delete <username>
              Remove  the user specified (and roles assigned will be unassigned for the specified
              user).

       user remove <username>
              Remove the user specified (and roles assigned will be unassigned for the  specified
              user).

       group create <group> [<role id>]...
              Create an ACL for the group specified and assign roles to the group.

       group delete <group>
              Remove the group specified (and roles assigned will be unassigned for the specified
              group).

       group remove <group>
              Remove the group specified (and roles assigned will be unassigned for the specified
              group).

       permission add <role id> ((read | write | deny) (xpath <query> | id <id>))...
              Add the listed permissions to the role specified. Permissions are applied to either
              an xpath query or the id of a specific element in the CIB.
              Permissions are applied to the selected  XML  element's  entire  XML  subtree  (all
              elements  enclosed  within  it).  Write  permission  grants  the ability to create,
              modify, or remove the element and its subtree, and also the ability to  create  any
              "scaffolding"  elements  (enclosing elements that do not have attributes other than
              an ID). Permissions for more specific matches (more deeply  nested  elements)  take
              precedence  over  more general ones. If multiple permissions are configured for the
              same match (for example, in different roles applied to the  same  user),  any  deny
              permission takes precedence, then write, then lastly read.
              An xpath may include an attribute expression to select only elements that match the
              expression, but the permission  still  applies  to  the  entire  element  (and  its
              subtree),  not to the attribute alone. For example, using the xpath "//*[@name]" to
              give write permission would allow changes to the entirety of all elements that have
              a  "name"  attribute  and  everything  enclosed  by those elements. There is no way
              currently to give permissions for just one attribute of an element. That is to say,
              you can not define an ACL that allows someone to read just the dc-uuid attribute of
              the cib tag - that would select the cib element and give read access to the  entire
              CIB.

       permission delete <permission id>
              Remove the permission id specified (permission id's are listed in parenthesis after
              permissions in 'pcs acl' output).

       permission remove <permission id>
              Remove the permission id specified (permission id's are listed in parenthesis after
              permissions in 'pcs acl' output).

   property
       [config [<property>... | --all | --defaults | (--output-format text|cmd|json)]] | [--all |
       --defaults | (--output-format text|cmd|json)]
              List property settings (default: lists configured  properties).  If  --defaults  is
              specified  will  show  all  property  defaults,  if  --all  is  specified,  current
              configured properties will be shown with unset properties and their defaults.   See
              'pcs property describe' for a description of the properties. There are 3 formats of
              output available: 'cmd', 'json' and 'text', default is 'text'. Format 'text'  is  a
              human  friendly  output.  Format  'cmd'  prints  pcs  commands which can be used to
              recreate the same configuration. Format 'json' is a machine oriented output of  the
              configuration.

       defaults [<property>...] | [--full]
              List  all property defaults or only defaults for specified properties. If --full is
              specified, all properties defaults including advanced are shown.

       describe [<property>...] [--output-format text|json] [--full]
              Show cluster properties. There are  2  formats  of  output  available:  'json'  and
              'text',  default is 'text'. Format 'text' is a human friendly output. Format 'json'
              is a machine oriented output of the configuration.  If  --full  is  specified,  all
              properties descriptions including advanced are shown.

       set <property>=[<value>] ... [--force]
              Set  specific  pacemaker  properties  (if  the  value is blank then the property is
              removed from the configuration).  If a  property  is  not  recognized  by  pcs  the
              property  will  not  be  created  unless  the  --force  is used.  See 'pcs property
              describe' for a description of the properties.

       unset <property> ...
              Remove property from configuration.  See 'pcs property describe' for a  description
              of the properties.

   constraint
       [config] [--full] [--all] [--output-format text|cmd|json]
              List  all current constraints that are not expired. If --all is specified also show
              expired constraints. If --full is specified also list the constraint ids. There are
              3  formats of output available: 'cmd', 'json' and 'text', default is 'text'. Format
              'text' is a human friendly output. Format 'cmd' prints pcs commands  which  can  be
              used to recreate the same configuration. Format 'json' is a machine oriented output
              of the configuration.

       location <resource> prefers <node>[=<score>] [<node>[=<score>]]...
              Create a location constraint on a resource to prefer the specified node with  score
              (default  score:  INFINITY).  Resource may be either a resource id <resource_id> or
              %<resource_id> or resource%<resource_id>, or a  resource  name  regular  expression
              regexp%<resource_pattern>.

       location <resource> avoids <node>[=<score>] [<node>[=<score>]]...
              Create  a  location constraint on a resource to avoid the specified node with score
              (default score: INFINITY). Resource may be either a resource  id  <resource_id>  or
              %<resource_id>  or  resource%<resource_id>,  or  a resource name regular expression
              regexp%<resource_pattern>.

       location     <resource>     rule     [id=<rule     id>]      [resource-discovery=<option>]
       [role=Promoted|Unpromoted]          [constraint-id=<id>]          [score=<score>         |
       score-attribute=<attribute>] <expression>
              Creates a  location  constraint  with  a  rule  on  the  specified  resource  where
              expression looks like one of the following:
                defined|not_defined <node attribute>
                <node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
                date gt|lt <date>
                date in_range <date> to <date>
                date in_range <date> to duration <duration options>...
                date-spec <date spec options>...
                <expression> and|or <expression>
                ( <expression> )
              where  duration  options  and  date  spec  options are: hours, monthdays, weekdays,
              yeardays, months, weeks, years, weekyears, moon. Resource may be either a  resource
              id  <resource_id>  or  %<resource_id> or resource%<resource_id>, or a resource name
              regular expression regexp%<resource_pattern>. If score is omitted  it  defaults  to
              INFINITY.   If   id   is  omitted  one  is  generated  from  the  resource  id.  If
              resource-discovery is omitted it defaults to 'always'.

       location [config [resources [<resource reference>...]]  |  [nodes  [<node>...]]]  [--full]
       [--all] [--output-format text|cmd|json]
              List  all  the current location constraints that are not expired. If 'resources' is
              specified,  location  constraints  are  displayed  per  resource.  If  'nodes'   is
              specified,  location  constraints  are  displayed  per  node.  If  specific  nodes,
              resources or resource name regular  expressions  are  specified,  only  constraints
              containing  those  will  be  shown.  Resource reference may be either a resource id
              <resource_id> or %<resource_id>  or  resource%<resource_id>,  or  a  resource  name
              regular  expression  regexp%<resource_pattern>.  If  --full  is  specified show the
              internal  constraint  id's  as  well.  If  --all  is  specified  show  the  expired
              constraints.  There  are  3  formats of output available: 'cmd', 'json' and 'text',
              default is 'text'. Format 'text' is a human friendly output.  Format  'cmd'  prints
              pcs commands which can be used to recreate the same configuration. Format 'json' is
              a machine oriented output of the configuration.

       location add <id> <resource> <node> <score> [resource-discovery=<option>]
              Add a location constraint with the appropriate id for the specified resource,  node
              name   and   score.   Resource  may  be  either  a  resource  id  <resource_id>  or
              %<resource_id> or resource%<resource_id>, or a  resource  name  regular  expression
              regexp%<resource_pattern>.

       location delete <id>...
              Remove location constraints with the specified ids.

       location remove <id>...
              Remove location constraints with the specified ids.

       order [config] [--full] [--output-format text|cmd|json]
              List  all  current  ordering  constraints (if --full is specified show the internal
              constraint id's as well). There are 3 formats of output  available:  'cmd',  'json'
              and  'text',  default  is  'text'. Format 'text' is a human friendly output. Format
              'cmd' prints pcs commands which can be used to  recreate  the  same  configuration.
              Format 'json' is a machine oriented output of the configuration.

       order [action] <resource id> then [action] <resource id> [options]
              Add an ordering constraint specifying actions (start, stop, promote, demote) and if
              no action is specified the default action will be  start.   Available  options  are
              kind=Optional/Mandatory/Serialize,  symmetrical=true/false,  require-all=true/false
              and id=<constraint-id>.

       order set <resource1> [resourceN]... [options] [set <resourceX> ... [options]] [setoptions
       [constraint_options]]
              Create  an  ordered  set of resources. Available options are sequential=true/false,
              require-all=true/false     and     action=start/promote/demote/stop.      Available
              constraint_options  are  id=<constraint-id>,  kind=Optional/Mandatory/Serialize and
              symmetrical=true/false.

       order delete <resource1> [resourceN]...
              Remove resource from any ordering constraint

       order remove <resource1> [resourceN]...
              Remove resource from any ordering constraint

       colocation [config] [--full] [--output-format text|cmd|json]
              List all current colocation constraints (if --full is specified show  the  internal
              constraint  id's  as  well). There are 3 formats of output available: 'cmd', 'json'
              and 'text', default is 'text'. Format 'text' is a  human  friendly  output.  Format
              'cmd'  prints  pcs  commands  which can be used to recreate the same configuration.
              Format 'json' is a machine oriented output of the configuration.

       colocation add [<role>] <source resource id> with [<role>] <target  resource  id>  [score]
       [options] [id=constraint-id]
              Request  <source  resource>  to run on the same node where pacemaker has determined
              <target resource> should run.  Positive values of score mean the  resources  should
              be  run  on  the same node, negative values mean the resources should not be run on
              the same node.  Specifying 'INFINITY' (or '-INFINITY') for the score forces <source
              resource>   to  run  (or  not  run)  with  <target  resource>  (score  defaults  to
              "INFINITY"). A role can be: 'Promoted', 'Unpromoted', 'Started', 'Stopped'  (if  no
              role is specified, it defaults to 'Started').

       colocation  set  <resource1>  [resourceN]...  [options]  [set  <resourceX>  ... [options]]
       [setoptions [constraint_options]]
              Create  a  colocation  constraint  with  a  resource  set.  Available  options  are
              sequential=true/false   and   role=Stopped/Started/Promoted/Unpromoted.   Available
              constraint_options are id and score.

       colocation delete <source resource id> <target resource id>
              Remove colocation constraints with specified resources.

       colocation remove <source resource id> <target resource id>
              Remove colocation constraints with specified resources.

       ticket [config] [--full] [--output-format text|cmd|json]
              List all current ticket constraints (if  --full  is  specified  show  the  internal
              constraint  id's  as  well). There are 3 formats of output available: 'cmd', 'json'
              and 'text', default is 'text'. Format 'text' is a  human  friendly  output.  Format
              'cmd'  prints  pcs  commands  which can be used to recreate the same configuration.
              Format 'json' is a machine oriented output of the configuration.

       ticket add <ticket> [<role>] <resource id> [<options>] [id=<constraint-id>]
              Create   a   ticket   constraint   for   <resource   id>.   Available   option   is
              loss-policy=fence/stop/freeze/demote.  A  role can be Promoted, Unpromoted, Started
              or Stopped.

       ticket set <resource1> [<resourceN>]...  [<options>]  [set  <resourceX>  ...  [<options>]]
       setoptions <constraint_options>
              Create   a   ticket   constraint   with  a  resource  set.  Available  options  are
              role=Stopped/Started/Promoted/Unpromoted.    Required    constraint    option    is
              ticket=<ticket>.   Optional   constraint   options   are   id=<constraint-id>   and
              loss-policy=fence/stop/freeze/demote.

       ticket delete <ticket> <resource id>
              Remove all ticket constraints with <ticket> from <resource id>.

       ticket remove <ticket> <resource id>
              Remove all ticket constraints with <ticket> from <resource id>.

       delete <constraint id>...
              Remove constraint(s) or constraint rules with the specified id(s).

       remove <constraint id>...
              Remove constraint(s) or constraint rules with the specified id(s).

       ref <resource>...
              List constraints referencing specified resource.

       rule     add     <constraint     id>     [id=<rule     id>]     [role=Promoted|Unpromoted]
       [score=<score>|score-attribute=<attribute>] <expression>
              Add  a  rule  to  a  location  constraint  specified  by  'constraint id' where the
              expression looks like one of the following:
                defined|not_defined <node attribute>
                <node attribute> lt|gt|lte|gte|eq|ne [string|integer|number|version] <value>
                date gt|lt <date>
                date in_range <date> to <date>
                date in_range <date> to duration <duration options>...
                date-spec <date spec options>...
                <expression> and|or <expression>
                ( <expression> )
              where duration options and date  spec  options  are:  hours,  monthdays,  weekdays,
              yeardays, months, weeks, years, weekyears, moon. If score is omitted it defaults to
              INFINITY. If id is omitted one is generated from the constraint id.

       rule delete <rule id>...
              Remove rules from their location constraints. If  all  rules  are  removed  from  a
              constraint, the constraint will also be removed.

       rule remove <rule id>...
              Remove  rules  from  their  location  constraints.  If all rules are removed from a
              constraint, the constraint will also be removed.

   qdevice
       status <device model> [--full] [<cluster name>]
              Show runtime status of specified model of quorum  device  provider.   Using  --full
              will  give  more detailed output.  If <cluster name> is specified, only information
              about the specified cluster will be displayed.

       setup model <device model> [--enable] [--start]
              Configure specified model of quorum device provider.  Quorum  device  then  can  be
              added to clusters by running "pcs quorum device add" command in a cluster.  --start
              will also start the provider.  --enable will configure the  provider  to  start  on
              boot.

       destroy <device model>
              Disable  and  stop  specified  model  of  quorum  device  provider  and  delete its
              configuration files.

       start <device model>
              Start specified model of quorum device provider.

       stop <device model>
              Stop specified model of quorum device provider.

       kill <device model>
              Force specified model of quorum device provider to stop (performs kill  -9).   Note
              that  init  system  (e.g.  systemd)  can detect that the qdevice is not running and
              start it again.  If you want to stop the qdevice, run "pcs qdevice stop" command.

       enable <device model>
              Configure specified model of quorum device provider to start on boot.

       disable <device model>
              Configure specified model of quorum device provider to not start on boot.

   quorum
       [config]
              Show quorum configuration.

       status Show quorum runtime status.

       device  add  [<generic  options>]  model  <device  model>  [<model  options>]  [heuristics
       <heuristics options>]
              Add  a  quorum device to the cluster. Quorum device should be configured first with
              "pcs qdevice setup". It is not possible to use more than one  quorum  device  in  a
              cluster simultaneously.
              Currently  the only supported model is 'net'. It requires model options 'algorithm'
              and 'host' to be specified. Options are documented in corosync-qdevice(8) man page;
              generic  options  are 'sync_timeout' and 'timeout', for model net options check the
              quorum.device.net section, for heuristics options see the  quorum.device.heuristics
              section.  Pcs  automatically  creates and distributes TLS certificates and sets the
              'tls' model option to the default value 'on'.
              Example:     pcs     quorum     device     add     model     net      algorithm=lms
              host=qnetd.internal.example.com

       device heuristics delete
              Remove all heuristics settings of the configured quorum device.

       device heuristics remove
              Remove all heuristics settings of the configured quorum device.

       device delete
              Remove a quorum device from the cluster.

       device remove
              Remove a quorum device from the cluster.

       device status [--full]
              Show quorum device runtime status.  Using --full will give more detailed output.

       device   update  [<generic  options>]  [model  <model  options>]  [heuristics  <heuristics
       options>]
              Add, remove or change quorum device  options.  Unspecified  options  will  be  kept
              unchanged.  If  you  wish  to  remove  an  option,  set  it  to  empty  value, i.e.
              'option_name='. Requires the cluster to be  stopped.  Model  and  options  are  all
              documented  in  corosync-qdevice(8)  man  page;  for  heuristics  options check the
              quorum.device.heuristics   subkey   section,   for   model   options   check    the
              quorum.device.<device model> subkey sections.

              WARNING:  If you want to change "host" option of qdevice model net, use "pcs quorum
              device remove" and "pcs  quorum  device  add"  commands  to  set  up  configuration
              properly unless old and new host is the same machine.

       expected-votes <votes>
              Set  expected  votes in the live cluster to specified value.  This only affects the
              live cluster, not changes any configuration files.

       unblock [--force]
              Cancel waiting for all nodes when establishing quorum.  Useful in situations  where
              you  know  the  cluster is inquorate, but you are confident that the cluster should
              proceed with resource management regardless.  This command should ONLY be used when
              nodes which the cluster is waiting for have been confirmed to be powered off and to
              have no access to shared resources.

              WARNING: If the nodes are not actually powered off or they do have access to shared
              resources, data corruption/cluster failure can occur. To prevent accidental running
              of this command, --force or interactive user  response  is  required  in  order  to
              proceed.

       update [auto_tie_breaker=[0|1]] [last_man_standing=[0|1]] [last_man_standing_window=[<time
       in ms>]] [wait_for_all=[0|1]]
              Add, remove or change quorum options.  At  least  one  option  must  be  specified.
              Unspecified options will be kept unchanged. If you wish to remove an option, set it
              to  empty  value,  i.e.  'option_name='.  Options  are  documented  in   corosync's
              votequorum(5) man page. Requires the cluster to be stopped.

   booth
       setup sites <address> <address> [<address>...] [arbitrators <address> ...] [--force]
              Write  new  booth configuration with specified sites and arbitrators.  Total number
              of peers (sites and arbitrators) must be odd.  When the configuration file  already
              exists, command fails unless --force is specified.

       destroy
              Remove booth configuration files.

       ticket add <ticket> [<name>=<value> ...]
              Add  new ticket to the current configuration. Ticket options are specified in booth
              manpage.

       ticket delete <ticket>
              Remove the specified ticket from the current configuration.

       ticket remove <ticket>
              Remove the specified ticket from the current configuration.

       config [<node>]
              Show booth configuration from the specified node or from the current node  if  node
              not specified.

       create ip <address>
              Make  the  cluster  run  booth  service  on  the  specified ip address as a cluster
              resource.  Typically this is used to run booth site.

       delete Remove booth resources created by the "pcs booth create" command.

       remove Remove booth resources created by the "pcs booth create" command.

       restart
              Restart booth resources created by the "pcs booth create" command.

       ticket grant <ticket> [<site address>]
              Grant the ticket to the site specified by the address, hence to the booth formation
              this site is a member of. When this specification is omitted, site address that has
              been specified with 'pcs booth create' command is used. Specifying site address  is
              therefore mandatory when running this command at a host in an arbitrator role.
              Note  that  the ticket must not be already granted in given booth formation; for an
              ad-hoc (and, in the worst case, abrupt, for a lack of a direct atomicity) change of
              this  preference  baring  direct interventions at the sites, the ticket needs to be
              revoked first, only then it can be granted at another site again.

       ticket revoke <ticket> [<site address>]
              Revoke the ticket in the booth formation as identified with one of its member sites
              specified by the address. When this specification is omitted, site address that has
              been specified with a prior 'pcs booth create' command  is  used.  Specifying  site
              address is therefore mandatory when running this command at a host in an arbitrator
              role.

       status Print current status of booth on the local node.

       pull <node>
              Pull booth configuration from the specified node.

       sync [--skip-offline]
              Send booth configuration from the local node to all nodes in the cluster.

       enable Enable booth arbitrator service.

       disable
              Disable booth arbitrator service.

       start  Start booth arbitrator service.

       stop   Stop booth arbitrator service.

   status
       [status] [--full] [--hide-inactive]
              View all information about the cluster and resources (--full provides more details,
              --hide-inactive hides inactive resources).

       resources [<resource id | tag id>] [node=<node>] [--hide-inactive]
              Show status of all currently configured resources. If --hide-inactive is specified,
              only show active resources. If a resource or tag id is specified, only show  status
              of  the specified resource or resources in the specified tag. If node is specified,
              only show status of resources configured for the specified node.

       cluster
              View current cluster status.

       corosync
              View current membership information as seen by corosync.

       quorum View current quorum status.

       qdevice <device model> [--full] [<cluster name>]
              Show runtime status of specified model of quorum  device  provider.   Using  --full
              will  give  more detailed output.  If <cluster name> is specified, only information
              about the specified cluster will be displayed.

       booth  Print current status of booth on the local node.

       nodes [corosync | both | config]
              View current status of nodes from  pacemaker.  If  'corosync'  is  specified,  view
              current status of nodes from corosync instead. If 'both' is specified, view current
              status of nodes from both corosync & pacemaker. If  'config'  is  specified,  print
              nodes from corosync & pacemaker configuration.

       pcsd [<node>]...
              Show  current  status of pcsd on nodes specified, or on all nodes configured in the
              local cluster if no nodes are specified.

       xml    View xml version of status (output from crm_mon -r -1 -X).

   config
       [show] View full cluster configuration.

       backup [filename]
              Creates the tarball containing the cluster configuration files.  If filename is not
              specified the standard output will be used.

       restore [--local] [filename]
              Restores the cluster configuration files on all nodes from the backup.  If filename
              is not specified the standard input will be used.  If --local is specified only the
              files on the current node will be restored.

       checkpoint
              List all available configuration checkpoints.

       checkpoint view <checkpoint_number>
              Show specified configuration checkpoint.

       checkpoint diff <checkpoint_number> <checkpoint_number>
              Show  differences  between  the  two  specified  checkpoints. Use checkpoint number
              'live' to compare a checkpoint to the current live configuration.

       checkpoint restore <checkpoint_number>
              Restore cluster configuration to specified checkpoint.

   pcsd
       certkey <certificate file> <key file>
              Load custom certificate and key files for use in pcsd.

       status [<node>]...
              Show current status of pcsd on nodes specified, or on all nodes configured  in  the
              local cluster if no nodes are specified.

       sync-certificates
              Sync pcsd certificates to all nodes in the local cluster.

       deauth [<token>]...
              Delete  locally  stored  authentication tokens used by remote systems to connect to
              the local pcsd instance. If no tokens are specified all  tokens  will  be  deleted.
              After  this  command  is  run other nodes will need to re-authenticate against this
              node to be able to connect to it.

   host
       auth (<host name> [addr=<address>[:<port>]])... [-u <username>] [-p <password>]
              Authenticate local pcs/pcsd against pcsd on specified  hosts.  It  is  possible  to
              specify  an  address and a port via which pcs/pcsd will communicate with each host.
              If an address is not specified a host name will be used. If a port is not specified
              2224 will be used.

       deauth [<host name>]...
              Delete  authentication tokens which allow pcs/pcsd on the current system to connect
              to remote pcsd instances on specified host names. If the current system is a member
              of  a cluster, the tokens will be deleted from all nodes in the cluster. If no host
              names are specified all tokens will be deleted. After this command is run this node
              will need to re-authenticate against other nodes to be able to connect to them.

   node
       attribute [[<node>] [--name <name>] | <node> <name>=<value> ...]
              Manage  node  attributes.   If  no parameters are specified, show attributes of all
              nodes.  If one parameter is specified,  show  attributes  of  specified  node.   If
              --name  is  specified,  show  specified  attribute's value from all nodes.  If more
              parameters are specified, set attributes of  specified  node.   Attributes  can  be
              removed by setting an attribute without a value.

       maintenance [--all | <node>...] [--wait[=n]]
              Put  specified  node(s) into maintenance mode, if no nodes or options are specified
              the current node will be put into maintenance mode, if --all is specified all nodes
              will  be put into maintenance mode. If --wait is specified, pcs will wait up to 'n'
              seconds for the node(s) to be put into  maintenance  mode  and  then  return  0  on
              success  or  1  if  the  operation  not  succeeded  yet. If 'n' is not specified it
              defaults to 60 minutes.

       unmaintenance [--all | <node>...] [--wait[=n]]
              Remove node(s) from maintenance mode, if no nodes  or  options  are  specified  the
              current node will be removed from maintenance mode, if --all is specified all nodes
              will be removed from maintenance mode. If --wait is specified, pcs will wait up  to
              'n'  seconds  for the node(s) to be removed from maintenance mode and then return 0
              on success or 1 if the operation not succeeded yet. If  'n'  is  not  specified  it
              defaults to 60 minutes.

       standby [--all | <node>...] [--wait[=n]]
              Put  specified node(s) into standby mode (the node specified will no longer be able
              to host resources), if no nodes or options are specified the current node  will  be
              put  into  standby  mode,  if --all is specified all nodes will be put into standby
              mode. If --wait is specified, pcs will wait up to 'n' seconds for the node(s) to be
              put  into  standby  mode  and  then  return  0 on success or 1 if the operation not
              succeeded yet. If 'n' is not specified it defaults to 60 minutes.

       unstandby [--all | <node>...] [--wait[=n]]
              Remove node(s) from standby mode (the node specified  will  now  be  able  to  host
              resources),  if  no nodes or options are specified the current node will be removed
              from standby mode, if --all is specified all nodes will  be  removed  from  standby
              mode. If --wait is specified, pcs will wait up to 'n' seconds for the node(s) to be
              removed from standby mode and then return 0 on success or 1 if  the  operation  not
              succeeded yet. If 'n' is not specified it defaults to 60 minutes.

       utilization [[<node>] [--name <name>] | <node> <name>=<value> ...]
              Add  specified  utilization  options  to specified node.  If node is not specified,
              shows  utilization  of  all  nodes.   If  --name  is  specified,  shows   specified
              utilization  value  from all nodes. If utilization options are not specified, shows
              utilization of specified node.  Utilization option should be in format  name=value,
              value  has  to  be  integer.  Options may be removed by setting an option without a
              value.  Example: pcs  node  utilization  node1  cpu=4  ram=   For  the  utilization
              configuration  to  be  in  effect,  cluster  property  'placement-strategy' must be
              configured accordingly.

   alert
       [config]
              Show all configured alerts.

       create     path=<path>      [id=<alert-id>]      [description=<description>]      [options
       [<option>=<value>]...] [meta [<meta-option>=<value>]...]
              Define  an alert handler with specified path. Id will be automatically generated if
              it is not specified.

       update      <alert-id>      [path=<path>]       [description=<description>]       [options
       [<option>=<value>]...] [meta [<meta-option>=<value>]...]
              Update  an  existing  alert  handler with specified id. Unspecified options will be
              kept unchanged. If you wish to remove an  option,  set  it  to  empty  value,  i.e.
              'option_name='.

       delete <alert-id> ...
              Remove alert handlers with specified ids.

       remove <alert-id> ...
              Remove alert handlers with specified ids.

       recipient       add       <alert-id>      value=<recipient-value>      [id=<recipient-id>]
       [description=<description>]         [options         [<option>=<value>]...]          [meta
       [<meta-option>=<value>]...]
              Add new recipient to specified alert handler.

       recipient   update  <recipient-id>  [value=<recipient-value>]  [description=<description>]
       [options [<option>=<value>]...] [meta [<meta-option>=<value>]...]
              Update an existing recipient identified by its id. Unspecified options will be kept
              unchanged.  If  you  wish  to  remove  an  option,  set  it  to  empty  value, i.e.
              'option_name='.

       recipient delete <recipient-id> ...
              Remove specified recipients.

       recipient remove <recipient-id> ...
              Remove specified recipients.

   client
       local-auth [<pcsd-port>] [-u <username>] [-p <password>]
              Authenticate current user to local pcsd. This is required to run some pcs  commands
              which may require permissions of root user such as 'pcs cluster start'.

   dr
       config Display disaster-recovery configuration from the local node.

       status [--full] [--hide-inactive]
              Display  status  of  the  local  and  the remote site cluster (--full provides more
              details, --hide-inactive hides inactive resources).

       set-recovery-site <recovery site node>
              Set up disaster-recovery with  the  local  cluster  being  the  primary  site.  The
              recovery site is defined by a name of one of its nodes.

       destroy
              Permanently destroy disaster-recovery configuration on all sites.

   tag
       [config|list [<tag id>...]]
              Display configured tags.

       create <tag id> <id> [<id>]...
              Create a tag containing the specified ids.

       delete <tag id>...
              Delete specified tags.

       remove <tag id>...
              Delete specified tags.

       update  <tag  id>  [add  <id>  [<id>]...  [--before  <id>  |  --after  <id>]] [remove <id>
       [<id>]...]
              Update a tag using the specified ids. Ids can be added, removed or moved in a  tag.
              You can use --before or --after to specify the position of the added ids relatively
              to some id already existing in the tag. By adding ids to a tag they are already  in
              and specifying --after or --before you can move the ids in the tag.

EXAMPLES

       Show all resources
              # pcs resource config

       Show options specific to the 'VirtualIP' resource
              # pcs resource config VirtualIP

       Create a new resource called 'VirtualIP' with options
              #    pcs    resource   create   VirtualIP   ocf:heartbeat:IPaddr2   ip=192.168.0.99
              cidr_netmask=32 nic=eth2 op monitor interval=30s

       Create a new resource called 'VirtualIP' with options
              # pcs resource create VirtualIP IPaddr2 ip=192.168.0.99 cidr_netmask=32 nic=eth2 op
              monitor interval=30s

       Change the ip address of VirtualIP and remove the nic option
              # pcs resource update VirtualIP ip=192.168.0.98 nic=

       Delete the VirtualIP resource
              # pcs resource delete VirtualIP

       Create the MyStonith stonith fence_virt device which can fence host 'f1'
              # pcs stonith create MyStonith fence_virt pcmk_host_list=f1

       Set the stonith-enabled property to false on the cluster (which disables stonith)
              # pcs property set stonith-enabled=false

USING --FORCE IN PCS COMMANDS

       Various  pcs commands accept the --force option. Its purpose is to override some of checks
       that pcs is doing or some of errors that may occur when a pcs command is  run.  When  such
       error  occurs,  pcs  will  print  the  error  with  a note it may be overridden. The exact
       behavior of the option is different for each pcs command. Using  the  --force  option  can
       lead  into  situations  that  would  normally  be  prevented  by logic of pcs commands and
       therefore its use is strongly discouraged unless you know what you are doing.

ENVIRONMENT VARIABLES

       EDITOR
               Path to a plain-text editor. This is used when pcs is requested to present a  text
              for the user to edit.

       no_proxy, https_proxy, all_proxy, NO_PROXY, HTTPS_PROXY, ALL_PROXY
               These environment variables (listed according to their priorities) control how pcs
              handles proxy servers when connecting to cluster nodes. See curl(1)  man  page  for
              details.

CHANGES IN PCS-0.11

       This section summarizes the most important changes in commands done in pcs-0.11.x compared
       to pcs-0.10.x. For detailed description of current commands see above.

   Legacy role names
       Roles 'Master' and 'Slave' are deprecated and should not  be  used  anymore.  Instead  use
       'Promoted'  and  'Unpromoted'  respectively.  Similarly,  --master has been deprecated and
       replaced with --promoted.

   cluster
       uidgid rm
              This command has been replaced with 'pcs cluster uidgid delete'  and  'pcs  cluster
              uidgid remove'.

   resource
       move   The  'pcs  resource  move'  now  automatically removes location constraint used for
              moving a resource. It is  equivalent  of  'pcs  resource  move  --autodelete'  from
              pcs-0.10.9.  Legacy functionality of the 'resource move' command is still available
              as 'resource move-with-constraint <resource id>'.

       show --full
              This command has been replaced with 'pcs resource config'.

       show --groups
              This command has been replaced with 'pcs resource group list'.

       show   This command has been replaced with 'pcs resource status'.

   stonith
       show --full
              This command has been replaced with 'pcs stonith config'.

       show   This command has been replaced with 'pcs stonith status'.

CHANGES IN PCS-0.10

       This section summarizes the most important changes in commands done in pcs-0.10.x compared
       to pcs-0.9.x. For detailed description of current commands see above.

   acl
       show   The 'pcs acl show' command has been deprecated and will be removed. Please use 'pcs
              acl config' instead. Applicable in pcs-0.10.9 and newer.

   alert
       show   The 'pcs alert show' command has been deprecated and will be  removed.  Please  use
              'pcs alert config' instead. Applicable in pcs-0.10.9 and newer.

   cluster
       auth   The 'pcs cluster auth' command only authenticates nodes in a local cluster and does
              not accept a node list. The new command for authentication is 'pcs host  auth'.  It
              allows one to specify host names, addresses and pcsd ports.

       node add
              Custom node names and Corosync 3.x with knet are fully supported now, therefore the
              syntax has been completely changed.
              The --device and --watchdog options have been replaced with 'device' and 'watchdog'
              options, respectively.

       pcsd-status
              The  'pcs  cluster  pcsd-status'  command  has been deprecated and will be removed.
              Please use 'pcs pcsd status' or 'pcs status pcsd' instead. Applicable in pcs-0.10.9
              and newer.

       quorum This command has been replaced with 'pcs quorum'.

       remote-node add
              This command has been replaced with 'pcs cluster node add-guest'.

       remote-node remove
              This  command  has been replaced with 'pcs cluster node delete-guest' and its alias
              'pcs cluster node remove-guest'.

       setup  Custom node names and Corosync 3.x with knet are fully supported now, therefore the
              syntax has been completely changed.
              The  --name  option  has  been  removed.  The first parameter of the command is the
              cluster name now.
              The --local option has been replaced with --corosync_conf <path>.

       standby
              This command has been replaced with 'pcs node standby'.

       uidgid rm
              This command has been deprecated, use 'pcs cluster uidgid delete' or  'pcs  cluster
              uidgid remove' instead.

       unstandby
              This command has been replaced with 'pcs node unstandby'.

       verify The -V option has been replaced with --full.
              To specify a filename, use the -f option.

   constraint
       list   The  'pcs  constraint  list'  command,  as  well  as  its  variants 'pcs constraint
              [location | colocation | order | ticket] list', has been  deprecated  and  will  be
              removed.  Please  use  'pcs  constraint  [location  |  colocation | order | ticket]
              config' instead. Applicable in pcs-0.10.9 and newer.

       show   The 'pcs constraint  show'  command,  as  well  as  its  variants  'pcs  constraint
              [location  |  colocation  |  order | ticket] show', has been deprecated and will be
              removed. Please use 'pcs constraint  [location  |  colocation  |  order  |  ticket]
              config' instead. Applicable in pcs-0.10.9 and newer.

   pcsd
       clear-auth
              This command has been replaced with 'pcs host deauth' and 'pcs pcsd deauth'.

   property
       list   The 'pcs property list' command has been deprecated and will be removed. Please use
              'pcs property config' instead. Applicable in pcs-0.10.9 and newer.

       set    The --node option is no longer supported. Use the 'pcs node attribute'  command  to
              set node attributes.

       show   The  --node  option is no longer supported. Use the 'pcs node attribute' command to
              view node attributes.
              The 'pcs property show' command has been deprecated and will be removed. Please use
              'pcs property config' instead. Applicable in pcs-0.10.9 and newer.

       unset  The  --node  option is no longer supported. Use the 'pcs node attribute' command to
              unset node attributes.

   resource
       create The 'master' keyword has been changed to 'promotable'.

       failcount reset
              The command has been removed as 'pcs resource cleanup' is doing  exactly  the  same
              job.

       master This command has been replaced with 'pcs resource promotable'.

       show   Previously,  this  command  displayed  either  status or configuration of resources
              depending on the parameters specified. This was confusing,  therefore  the  command
              was  replaced  by  several  new  commands.  To  display  resources status, run 'pcs
              resource' or 'pcs resource status'. To display resources  configuration,  run  'pcs
              resource  config'  or  'pcs resource config <resource name>'. To display configured
              resource groups, run 'pcs resource group list'.

   status
       groups This command has been replaced with 'pcs resource group list'.

   stonith
       level add | clear | delete | remove
              Delimiting stonith devices with  a  comma  is  deprecated,  use  a  space  instead.
              Applicable in pcs-0.10.9 and newer.

       level clear
              Syntax  of  the  command  has  been fixed so that it is not ambiguous any more. New
              syntax is 'pcs stonith level clear [target <target> |  stonith  <stonith  id>...]'.
              Old  syntax  'pcs stonith level clear [<target> | <stonith ids>]' is deprecated but
              still functional in pcs-0.10.x. Applicable in pcs-0.10.9 and newer.

       level delete | remove
              Syntax of the command has been fixed so that it is  not  ambiguous  any  more.  New
              syntax  is  'pcs  stonith level delete | remove [target <target>] [stonith <stonith
              id>]...'. Old syntax 'pcs  stonith  level  delete  |  remove  [<target>]  [<stonith
              id>]...' is deprecated but still functional in pcs-0.10.x. Applicable in pcs-0.10.9
              and newer.

       sbd device setup
              The --device option has been replaced with the 'device' option.

       sbd enable
              The --device and --watchdog options have been replaced with 'device' and 'watchdog'
              options, respectively.

       show   Previously,  this  command  displayed  either  status  or  configuration of stonith
              resources depending on the parameters specified. This was confusing, therefore  the
              command  was replaced by several new commands. To display stonith resources status,
              run  'pcs  stonith'  or  'pcs  stonith  status'.  To  display   stonith   resources
              configuration, run 'pcs stonith config' or 'pcs stonith config <stonith name>'.

   tag
       list   The 'pcs tag list' command has been deprecated and will be removed. Please use 'pcs
              tag config' instead. Applicable in pcs-0.10.9 and newer.

SEE ALSO

       http://clusterlabs.org/doc/

       pcsd(8), pcs_snmp_agent(8)

       corosync_overview(8),      votequorum(5),      corosync.conf(5),      corosync-qdevice(8),
       corosync-qdevice-tool(8), corosync-qnetd(8), corosync-qnetd-tool(8)

       pacemaker-controld(7),     pacemaker-fenced(7),    pacemaker-schedulerd(7),    crm_mon(8),
       crm_report(8), crm_simulate(8)

       boothd(8), sbd(8)