Provided by: bpfcc-tools_0.29.1+ds-1ubuntu7_all bug

NAME

       xfsslower - Trace slow xfs file operations, with per-event details.

SYNOPSIS

       xfsslower [-h] [-j] [-p PID] [min_ms]

DESCRIPTION

       This  tool traces common XFS file operations: reads, writes, opens, and syncs. It measures
       the time spent in these operations, and prints details for each that exceeded a threshold.

       WARNING: See the OVERHEAD section.

       By default, a minimum millisecond threshold of 10 is used. If a threshold of  0  is  used,
       all events are printed (warning: verbose).

       Since  this  works  by  tracing  the xfs_file_operations interface functions, it will need
       updating to match any changes to these functions.

       Since this uses BPF, only the root user can use this tool.

REQUIREMENTS

       CONFIG_BPF and bcc.

OPTIONS

       -p PID Trace this PID only.

       min_ms Minimum I/O latency (duration) to trace, in milliseconds. Default is 10 ms.

EXAMPLES

       Trace synchronous file reads and writes slower than 10 ms:
              # xfsslower

       Trace slower than 1 ms:
              # xfsslower 1

       Trace slower than 1 ms, and output just the fields in parsable format (csv):
              # xfsslower -j 1

       Trace all file reads and writes (warning: the output will be verbose):
              # xfsslower 0

       Trace slower than 1 ms, for PID 181 only:
              # xfsslower -p 181 1

FIELDS

       TIME(s)
              Time of I/O completion since the first I/O seen, in seconds.

       COMM   Process name.

       PID    Process ID.

       T      Type of operation. R == read, W == write, O == open, S == fsync.

       OFF_KB File offset for the I/O, in Kbytes.

       BYTES  Size of I/O, in bytes.

       LAT(ms)
              Latency (duration) of I/O,  measured  from  when  it  was  issued  by  VFS  to  the
              filesystem,  to when it completed. This time is inclusive of block device I/O, file
              system CPU cycles, file system locks, run queue latency, etc. It's a more  accurate
              measure of the latency suffered by applications performing file system I/O, than to
              measure this down at the block device interface.

       FILENAME
              A cached kernel file name (comes from dentry->d_name.name).

       ENDTIME_us
              Completion timestamp, microseconds (-j only).

       OFFSET_b
              File offset, bytes (-j only).

       LATENCY_us
              Latency (duration) of the I/O, in microseconds (-j only).

OVERHEAD

       This adds low-overhead instrumentation to these XFS operations, including reads and writes
       from  the  file system cache. Such reads and writes can be very frequent (depending on the
       workload; eg, 1M/sec), at which point the overhead of this tool  (even  if  it  prints  no
       "slower" events) can begin to become significant. Measure and quantify before use. If this
       continues to be a problem, consider switching to a tool that  prints  in-kernel  summaries
       only.

       Note  that  the  overhead  of  this  tool  should be less than fileslower(8), as this tool
       targets xfs functions only, and not all file read/write paths (which  can  include  socket
       I/O).

SOURCE

       This is from bcc.

              https://github.com/iovisor/bcc

       Also  look  in  the bcc distribution for a companion _examples.txt file containing example
       usage, output, and commentary for this tool.

OS

       Linux

STABILITY

       Unstable - in development.

AUTHOR

       Brendan Gregg

SEE ALSO

       biosnoop(8), funccount(8), fileslower(8)