Provided by: isc-dhcp-server_4.1.1-P1-17ubuntu8_i386 bug


       dhcpd.conf - dhcpd configuration file


       The  dhcpd.conf  file contains configuration information for dhcpd, the
       Internet Systems Consortium DHCP Server.

       The dhcpd.conf file is a free-form ASCII text file.   It is  parsed  by
       the  recursive-descent  parser built into dhcpd.   The file may contain
       extra tabs and newlines for formatting purposes.  Keywords in the  file
       are case-insensitive.   Comments may be placed anywhere within the file
       (except within quotes).   Comments begin with the # character  and  end
       at the end of the line.

       The  file  essentially  consists  of a list of statements.   Statements
       fall into two broad categories - parameters and declarations.

       Parameter statements either say how to do something (e.g., how  long  a
       lease  to  offer),  whether to do something (e.g., should dhcpd provide
       addresses to unknown clients), or what parameters  to  provide  to  the
       client (e.g., use gateway

       Declarations  are  used  to  describe  the  topology of the network, to
       describe clients on the network,  to  provide  addresses  that  can  be
       assigned  to  clients,  or to apply a group of parameters to a group of
       declarations.   In  any  group  of  parameters  and  declarations,  all
       parameters  must  be  specified before any declarations which depend on
       those parameters may be specified.

       Declarations about network topology include the shared-network and  the
       subnet  declarations.    If  clients  on  a  subnet  are to be assigned
       addresses dynamically, a  range  declaration  must  appear  within  the
       subnet  declaration.    For clients with statically assigned addresses,
       or for installations where only known clients will be served, each such
       client  must have a host declaration.   If parameters are to be applied
       to a group of declarations which are not related  strictly  on  a  per-
       subnet basis, the group declaration can be used.

       For  every  subnet  which will be served, and for every subnet to which
       the dhcp server is connected, there must  be  one  subnet  declaration,
       which  tells  dhcpd how to recognize that an address is on that subnet.
       A subnet declaration is required for each subnet even if  no  addresses
       will be dynamically allocated on that subnet.

       Some  installations  have  physical  networks on which more than one IP
       subnet operates.   For example, if there  is  a  site-wide  requirement
       that  8-bit  subnet  masks  be  used,  but  a  department with a single
       physical ethernet network expands to the point where it has  more  than
       254  nodes,  it  may  be necessary to run two 8-bit subnets on the same
       ethernet until such time as a new physical network can be  added.    In
       this  case,  the  subnet  declarations  for  these two networks must be
       enclosed in a shared-network declaration.

       Note that even when the shared-network declaration is absent, an  empty
       one  is  created  by  the  server to contain the subnet (and any scoped
       parameters included in the subnet).  For practical purposes, this means
       that  "stateless"  DHCP  clients,  which are not tied to addresses (and
       therefore subnets) will receive  the  same  configuration  as  stateful

       Some  sites  may  have  departments which have clients on more than one
       subnet, but it may be desirable to offer those clients a uniform set of
       parameters  which  are  different than what would be offered to clients
       from other departments on the same subnet.   For clients which will  be
       declared  explicitly  with host declarations, these declarations can be
       enclosed in a group declaration along with  the  parameters  which  are
       common  to  that  department.    For  clients  whose  addresses will be
       dynamically assigned, class declarations and  conditional  declarations
       may  be  used  to  group parameter assignments based on information the
       client sends.

       When a client is to be booted, its boot parameters  are  determined  by
       consulting that client's host declaration (if any), and then consulting
       any class declarations matching  the  client,  followed  by  the  pool,
       subnet  and  shared-network declarations for the IP address assigned to
       the client.   Each  of  these  declarations  itself  appears  within  a
       lexical scope, and all declarations at less specific lexical scopes are
       also consulted for  client  option  declarations.    Scopes  are  never
       considered  twice,  and  if  parameters  are  declared in more than one
       scope, the parameter declared in the most specific  scope  is  the  one
       that is used.

       When  dhcpd  tries  to  find  a host declaration for a client, it first
       looks for a host declaration which has a fixed-address declaration that
       lists  an  IP address that is valid for the subnet or shared network on
       which the client is booting.   If it doesn't find any  such  entry,  it
       tries to find an entry which has no fixed-address declaration.


       A typical dhcpd.conf file will look something like this:

       global parameters...

       subnet netmask {
         subnet-specific parameters...

       subnet netmask {
         subnet-specific parameters...

       subnet netmask {
         subnet-specific parameters...

       group {
         group-specific parameters...
         host {
           host-specific parameters...
         host {
           host-specific parameters...
         host {
           host-specific parameters...

                                      Figure 1

       Notice  that  at  the beginning of the file, there's a place for global
       parameters.   These might be  things  like  the  organization's  domain
       name,  the  addresses  of  the  name servers (if they are common to the
       entire organization), and so on.   So, for example:

            option domain-name "";
            option domain-name-servers,;

                                      Figure 2

       As you can  see  in  Figure  2,  you  can  specify  host  addresses  in
       parameters  using  their  domain  names  rather  than  their numeric IP
       addresses.  If a given hostname resolves to more than  one  IP  address
       (for  example,  if  that  host has two ethernet interfaces), then where
       possible, both addresses are supplied to the client.

       The most obvious reason for having subnet-specific parameters as  shown
       in Figure 1 is that each subnet, of necessity, has its own router.   So
       for the first subnet, for example, there should be something like:

            option routers;

       Note that the address here is  specified  numerically.    This  is  not
       required  -  if  you have a different domain name for each interface on
       your router, it's perfectly legitimate to use the domain name for  that
       interface  instead  of  the  numeric  address.   However, in many cases
       there may be only one domain name for all of a router's  IP  addresses,
       and it would not be appropriate to use that name here.

       In  Figure  1  there  is  also a group statement, which provides common
       parameters for a set of three hosts - zappo, beppo and harpo.   As  you
       can  see,  these  hosts are all in the domain, so it might
       make sense for a group-specific parameter to override the  domain  name
       supplied to these hosts:

            option domain-name "";

       Also,  given  the  domain they're in, these are probably test machines.
       If we wanted to test the DHCP leasing mechanism, we might set the lease
       timeout somewhat shorter than the default:

            max-lease-time 120;
            default-lease-time 120;

       You  may  have noticed that while some parameters start with the option
       keyword, some do not.   Parameters starting  with  the  option  keyword
       correspond  to  actual DHCP options, while parameters that do not start
       with the option keyword either control the behavior of the DHCP  server
       (e.g.,  how  long  a  lease  dhcpd  will  give  out), or specify client
       parameters that are not optional in the  DHCP  protocol  (for  example,
       server-name and filename).

       In  Figure  1,  each  host  had host-specific parameters.   These could
       include such things as the hostname option,  the  name  of  a  file  to
       upload  (the  filename  parameter)  and  the address of the server from
       which to upload the file (the next-server parameter).   In general, any
       parameter  can appear anywhere that parameters are allowed, and will be
       applied according to the scope in which the parameter appears.

       Imagine that you have a site with a lot  of  NCD  X-Terminals.    These
       terminals come in a variety of models, and you want to specify the boot
       files for each model.   One way to  do  this  would  be  to  have  host
       declarations for each server and group them by model:

       group {
         filename "Xncd19r";
         next-server ncd-booter;

         host ncd1 { hardware ethernet 0:c0:c3:49:2b:57; }
         host ncd4 { hardware ethernet 0:c0:c3:80:fc:32; }
         host ncd8 { hardware ethernet 0:c0:c3:22:46:81; }

       group {
         filename "Xncd19c";
         next-server ncd-booter;

         host ncd2 { hardware ethernet 0:c0:c3:88:2d:81; }
         host ncd3 { hardware ethernet 0:c0:c3:00:14:11; }

       group {
         filename "XncdHMX";
         next-server ncd-booter;

         host ncd1 { hardware ethernet 0:c0:c3:11:90:23; }
         host ncd4 { hardware ethernet 0:c0:c3:91:a7:8; }
         host ncd8 { hardware ethernet 0:c0:c3:cc:a:8f; }


       The  pool  declaration  can be used to specify a pool of addresses that
       will be treated differently than another pool of addresses, even on the
       same  network segment or subnet.   For example, you may want to provide
       a large set of addresses that can be assigned to DHCP clients that  are
       registered  to  your  DHCP  server,  while  providing  a smaller set of
       addresses, possibly with short lease  times,  that  are  available  for
       unknown  clients.    If you have a firewall, you may be able to arrange
       for addresses from one pool to be allowed access to the Internet, while
       addresses  in  another pool are not, thus encouraging users to register
       their DHCP clients.   To do this, you would  set  up  a  pair  of  pool

       subnet netmask {
         option routers;

         # Unknown clients get this pool.
         pool {
           option domain-name-servers;
           max-lease-time 300;
           allow unknown-clients;

         # Known clients get this pool.
         pool {
           option domain-name-servers,;
           max-lease-time 28800;
           deny unknown-clients;

       It  is also possible to set up entirely different subnets for known and
       unknown clients - address pools exist at the level of shared  networks,
       so address ranges within pool declarations can be on different subnets.

       As  you  can  see in the preceding example, pools can have permit lists
       that control which clients are allowed access to  the  pool  and  which
       aren't.   Each  entry  in  a  pool's permit list is introduced with the
       allow or deny keyword.   If a pool has a permit list, then  only  those
       clients that match specific entries on the permit list will be eligible
       to be assigned addresses from the pool.   If a pool has  a  deny  list,
       then  only those clients that do not match any entries on the deny list
       will be eligible.    If both permit and deny lists exist  for  a  pool,
       then  only clients that match the permit list and do not match the deny
       list will be allowed access.


       Address allocation is actually only done when a client is in  the  INIT
       state and has sent a DHCPDISCOVER message.  If the client thinks it has
       a valid lease and sends a DHCPREQUEST to initiate or renew that  lease,
       the server has only three choices - it can ignore the DHCPREQUEST, send
       a DHCPNAK to tell the client it should stop using the address, or  send
       a  DHCPACK,  telling  the  client to go ahead and use the address for a

       If the server finds the address the  client  is  requesting,  and  that
       address is available to the client, the server will send a DHCPACK.  If
       the address is no longer available, or the client  isn't  permitted  to
       have  it,  the server will send a DHCPNAK.  If the server knows nothing
       about the address,  it  will  remain  silent,  unless  the  address  is
       incorrect for the network segment to which the client has been attached
       and the server is authoritative for that network segment, in which case
       the  server  will  send a DHCPNAK even though it doesn't know about the

       There may be a host declaration matching the  client's  identification.
       If  that  host  declaration  contains  a fixed-address declaration that
       lists an IP address that is valid for the network segment to which  the
       client  is  connected.   In  this  case,  the DHCP server will never do
       dynamic address allocation.  In this case, the client  is  required  to
       take  the  address  specified  in the host declaration.   If the client
       sends a DHCPREQUEST for some other address,  the  server  will  respond
       with a DHCPNAK.

       When  the  DHCP  server allocates a new address for a client (remember,
       this only happens if the client has  sent  a  DHCPDISCOVER),  it  first
       looks  to see if the client already has a valid lease on an IP address,
       or if there is an old IP address the client had before that hasn't  yet
       been  reassigned.   In that case, the server will take that address and
       check it to see if the client is still permitted to  use  it.   If  the
       client  is  no  longer  permitted  to use it, the lease is freed if the
       server thought it was still in use - the fact that the client has  sent
       a  DHCPDISCOVER proves to the server that the client is no longer using
       the lease.

       If no existing lease is found, or if the client is forbidden to receive
       the  existing  lease,  then the server will look in the list of address
       pools for the network segment to which the client  is  attached  for  a
       lease that is not in use and that the client is permitted to have.   It
       looks through each pool declaration in sequence (all range declarations
       that appear outside of pool declarations are grouped into a single pool
       with no permit list).   If the permit list  for  the  pool  allows  the
       client  to be allocated an address from that pool, the pool is examined
       to see if there is an address available.   If so, then  the  client  is
       tentatively  assigned  that  address.    Otherwise,  the  next  pool is
       tested.   If no addresses are found that can be assigned to the client,
       no response is sent to the client.

       If  an  address is found that the client is permitted to have, and that
       has  never  been  assigned  to  any  client  before,  the  address   is
       immediately  allocated to the client.   If the address is available for
       allocation but has been previously assigned to a different client,  the
       server  will keep looking in hopes of finding an address that has never
       before been assigned to a client.

       The DHCP server generates the list of available  IP  addresses  from  a
       hash  table.    This  means  that  the  addresses are not sorted in any
       particular order, and so it is not possible to  predict  the  order  in
       which  the  DHCP server will allocate IP addresses.   Users of previous
       versions of the ISC DHCP server may have become accustomed to the  DHCP
       server  allocating  IP  addresses  in  ascending  order, but this is no
       longer possible, and there is no way to configure  this  behavior  with
       version 3 of the ISC DHCP server.


       The  DHCP  server  checks IP addresses to see if they are in use before
       allocating them to clients.   It does this  by  sending  an  ICMP  Echo
       request  message  to  the IP address being allocated.   If no ICMP Echo
       reply is received within a second, the address is assumed to  be  free.
       This  is  only  done  for  leases  that  have  been  specified in range
       statements, and only when the lease is thought by the DHCP server to be
       free  -  i.e.,  the DHCP server or its failover peer has not listed the
       lease as in use.

       If a response is received to an ICMP  Echo  request,  the  DHCP  server
       assumes  that there is a configuration error - the IP address is in use
       by some host on the network that is not a DHCP client.   It  marks  the
       address as abandoned, and will not assign it to clients.

       If  a  DHCP  client tries to get an IP address, but none are available,
       but there are abandoned IP addresses, then the DHCP server will attempt
       to  reclaim an abandoned IP address.   It marks one IP address as free,
       and then does the same ICMP Echo request  check  described  previously.
       If there is no answer to the ICMP Echo request, the address is assigned
       to the client.

       The DHCP server does not cycle through abandoned IP  addresses  if  the
       first  IP  address it tries to reclaim is free.   Rather, when the next
       DHCPDISCOVER comes in from the client, it will attempt a new allocation
       using  the  same method described here, and will typically try a new IP


       This version of the ISC DHCP server supports the DHCP failover protocol
       as  documented in draft-ietf-dhc-failover-07.txt.   This is not a final
       protocol document, and we have not done interoperability  testing  with
       other vendors' implementations of this protocol, so you must not assume
       that this implementation conforms to the standard.  If you wish to  use
       the  failover  protocol, make sure that both failover peers are running
       the same version of the ISC DHCP server.

       The failover protocol allows two DHCP servers (and no more than two) to
       share  a common address pool.   Each server will have about half of the
       available IP addresses in the pool at any given  time  for  allocation.
       If one server fails, the other server will continue to renew leases out
       of the pool, and will allocate new addresses out of the roughly half of
       available  addresses  that  it  had  when communications with the other
       server were lost.

       It is possible during a prolonged failure to tell the remaining  server
       that  the other server is down, in which case the remaining server will
       (over time) reclaim all the addresses the other  server  had  available
       for  allocation,  and begin to reuse them.   This is called putting the
       server into the PARTNER-DOWN state.

       You can put the server into the PARTNER-DOWN state either by using  the
       omshell  (1)  command  or by stopping the server, editing the last peer
       state declaration in the lease file, and restarting  the  server.    If
       you  use  this  last  method, be sure to leave the date and time of the
       start of the state blank:

       failover peer name state {
       my state partner-down;
       peer state state at date;

       When the other server comes back online, it should automatically detect
       that  it has been offline and request a complete update from the server
       that was running in the PARTNER-DOWN state, and then both servers  will
       resume processing together.

       It is possible to get into a dangerous situation: if you put one server
       into the PARTNER-DOWN state, and then *that* server goes down, and  the
       other  server  comes  back  up, the other server will not know that the
       first server was in the PARTNER-DOWN state,  and  may  issue  addresses
       previously  issued  by the other server to different clients, resulting
       in IP address conflicts.   Before putting a  server  into  PARTNER-DOWN
       state,  therefore,  make  sure  that  the other server will not restart

       The failover protocol defines a primary server  role  and  a  secondary
       server  role.    There  are  some  differences  in  how  primaries  and
       secondaries act, but most of the differences simply  have  to  do  with
       providing  a  way  for each peer to behave in the opposite way from the
       other.   So one server must be configured as  primary,  and  the  other
       must  be  configured as secondary, and it doesn't matter too much which
       one is which.


       When a server starts that has  not  previously  communicated  with  its
       failover  peer, it must establish communications with its failover peer
       and synchronize with it before it can serve clients.   This can  happen
       either  because  you  have just configured your DHCP servers to perform
       failover for the first time, or because one of  your  failover  servers
       has failed catastrophically and lost its database.

       The  initial  recovery  process  is  designed  to  ensure that when one
       failover peer loses its database and then  resynchronizes,  any  leases
       that the failed server gave out before it failed will be honored.  When
       the failed server starts up, it notices that it has no  saved  failover
       state, and attempts to contact its peer.

       When  it  has established contact, it asks the peer for a complete copy
       its peer's lease database.  The peer then sends its complete  database,
       and sends a message indicating that it is done.  The failed server then
       waits until MCLT has passed, and once MCLT has passed both servers make
       the transition back into normal operation.  This waiting period ensures
       that any leases the failed server may  have  given  out  while  out  of
       contact with its partner will have expired.

       While  the  failed  server  is  recovering,  its partner remains in the
       partner-down state, which means that it is serving  all  clients.   The
       failed  server  provides no service at all to DHCP clients until it has
       made the transition into normal operation.

       In the case where both servers  detect  that  they  have  never  before
       communicated  with  their  partner,  they both come up in this recovery
       state and follow the procedure we have just described.   In this  case,
       no service will be provided to DHCP clients until MCLT has expired.


       In  order  to  configure failover, you need to write a peer declaration
       that configures the failover protocol,  and  you  need  to  write  peer
       references  in each pool declaration for which you want to do failover.
       You do not have to do  failover  for  all  pools  on  a  given  network
       segment.     You  must  not  tell  one  server it's doing failover on a
       particular address pool and tell the other it is not.    You  must  not
       have  any  common address pools on which you are not doing failover.  A
       pool declaration that utilizes failover would look like this:

       pool {
            failover peer "foo";
            pool specific parameters

       The  server currently  does very  little  sanity checking,  so if   you
       configure  it wrong, it will just  fail in odd ways.  I would recommend
       therefore that you either do  failover or don't do failover, but  don't
       do  any mixed pools.  Also,  use the same master configuration file for
       both  servers,  and  have  a  separate file  that  contains  the   peer
       declaration  and includes the master file.  This will help you to avoid
       configuration  mismatches.  As our  implementation evolves,  this  will
       become   less of  a  problem.  A  basic  sample dhcpd.conf  file for  a
       primary server might look like this:

       failover peer "foo" {
         port 519;
         peer address;
         peer port 520;
         max-response-delay 60;
         max-unacked-updates 10;
         mclt 3600;
         split 128;
         load balance max seconds 3;

       include "/etc/dhcpd.master";

       The statements in the peer declaration are as follows:

       The primary and secondary statements

         [ primary | secondary ];

         This determines whether  the  server  is  primary  or  secondary,  as
         described earlier under DHCP FAILOVER.

       The address statement

         address address;

         The  address  statement  declares the IP address or DNS name on which
         the server should listen for connections from its failover peer,  and
         also  the  value  to  use  for  the  DHCP  Failover  Protocol  server
         identifier.  Because this value is used as an identifier, it may  not
         be omitted.

       The peer address statement

         peer address address;

         The  peer  address  statement  declares the IP address or DNS name to
         which the server should  connect  to  reach  its  failover  peer  for
         failover messages.

       The port statement

         port port-number;

         The  port  statement declares the TCP port on which the server should
         listen for connections from its failover peer.   This  statement  may
         not  currently be omitted, because the failover protocol does not yet
         have a reserved TCP port number.

       The peer port statement

         peer port port-number;

         The peer port statement declares the TCP port  to  which  the  server
         should  connect  to  reach  its  failover peer for failover messages.
         This statement may not be omitted because the failover protocol  does
         not  yet  have a reserved TCP port number.   The port number declared
         in the peer port statement  may  be  the  same  as  the  port  number
         declared in the port statement.

       The max-response-delay statement

         max-response-delay seconds;

         The  max-response-delay  statement  tells  the  DHCP  server how many
         seconds may pass without receiving a message from its  failover  peer
         before it assumes that connection has failed.   This number should be
         small enough  that  a  transient  network  failure  that  breaks  the
         connection  will not result in the servers being out of communication
         for a long time, but large enough that the  server  isn't  constantly
         making and breaking connections.   This parameter must be specified.

       The max-unacked-updates statement

         max-unacked-updates count;

         The  max-unacked-updates  statement  tells the remote DHCP server how
         many BNDUPD messages it can send before it receives a BNDACK from the
         local  system.    We  don't have enough operational experience to say
         what a good value for this is, but 10 seems to work.   This parameter
         must be specified.

       The mclt statement

         mclt seconds;

         The mclt statement defines the Maximum Client Lead Time.   It must be
         specified on the primary, and may not be specified on the  secondary.
         This is the length of time for which a lease may be renewed by either
         failover peer without contacting the  other.    The  longer  you  set
         this,  the  longer  it will take for the running server to recover IP
         addresses after moving into PARTNER-DOWN state.   The shorter you set
         it,  the  more  load  your  servers will experience when they are not
         communicating.    A  value  of  something  like  3600   is   probably
         reasonable,  but  again bear in mind that we have no real operational
         experience with this.

       The split statement

         split index;

         The split statement specifies  the  split  between  the  primary  and
         secondary  for  the  purposes  of load balancing.   Whenever a client
         makes a DHCP request, the DHCP server  runs  a  hash  on  the  client
         identification, resulting in value from 0 to 255.  This is used as an
         index into a 256 bit field.  If the bit at that  index  is  set,  the
         primary  is  responsible.   If  the bit at that index is not set, the
         secondary is responsible.  The split value determines how many of the
         leading  bits  are  set to one.  So, in practice, higher split values
         will cause the primary to serve  more  clients  than  the  secondary.
         Lower  split  values,  the  converse.  Legal values are between 0 and
         255, of which the most reasonable is 128.

       The hba statement

         hba colon-separated-hex-list;

         The hba  statement  specifies  the  split  between  the  primary  and
         secondary  as  a  bitmap  rather  than  a cutoff, which theoretically
         allows for finer-grained control.   In practice, there is probably no
         need  for  such  fine-grained  control,  however.    An  example  hba

           hba ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:

         This is equivalent to a split 128;  statement,  and  identical.   The
         following two examples are also equivalent to a split of 128, but are
         not identical:

           hba aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:aa:

           hba 55:55:55:55:55:55:55:55:55:55:55:55:55:55:55:55:

         They are equivalent, because half the bits are set to 0, half are set
         to  1  (0xa  and  0x5  are  1010  and  0101  binary respectively) and
         consequently this would roughly divide the  clients  equally  between
         the  servers.   They are not identical, because the actual peers this
         would load balance to each server are different for each example.

         You must only have split or hba defined, never both.  For most cases,
         the  fine-grained  control that hba offers isn't necessary, and split
         should be used.

       The load balance max seconds statement

         load balance max seconds seconds;

         This statement allows you to configure  a  cutoff  after  which  load
         balancing  is disabled.  The cutoff is based on the number of seconds
         since the client sent its first DHCPDISCOVER or DHCPREQUEST  message,
         and only works with clients that correctly implement the secs field -
         fortunately most clients do.  We recommend setting this to  something
         like 3 or 5.  The effect of this is that if one of the failover peers
         gets into a state where it is responding to failover messages but not
         responding to some client requests, the other failover peer will take
         over its client load automatically as the clients retry.

       The Failover pool balance statements.

          max-lease-misbalance percentage;
          max-lease-ownership percentage;
          min-balance seconds;
          max-balance seconds;

         This version of the DHCP Server evaluates pool balance on a schedule,
         rather  than  on demand as leases are allocated.  The latter approach
         proved to be  slightly  klunky  when  pool  misbalanced  reach  total
         saturation...when  any  server  ran  out of leases to assign, it also
         lost its ability to notice it had run dry.

         In order to understand pool balance, some elements of  its  operation
         first  need  to  be  defined.   First,  there are 'free' and 'backup'
         leases.  Both of these  are  referred  to  as  'free  state  leases'.
         'free'  and  'backup'  are  'the free states' for the purpose of this
         document.  The difference is that only the primary may allocate  from
         'free'  leases  unless  under  special  circumstances,  and  only the
         secondary may allocate 'backup' leases.

         When pool balance is performed, the only plausible expectation is  to
         provide  a  50/50  split  of  the  free  state leases between the two
         servers.  This is because no one can predict which server will  fail,
         regardless  of  the  relative  load  placed  upon the two servers, so
         giving each server half the leases gives both servers the same amount
         of  'failure endurance'.  Therefore, there is no way to configure any
         different behaviour, outside of  some  very  small  windows  we  will
         describe shortly.

         The  first  thing  calculated  on  any  pool  balance  run is a value
         referred to as 'lts', or "Leases To  Send".   This,  simply,  is  the
         difference  in  the  count of free and backup leases, divided by two.
         For the secondary, it is  the  difference  in  the  backup  and  free
         leases,  divided  by  two.   The  resulting value is signed: if it is
         positive, the local server is expected to hand out leases to retain a
         50/50  balance.   If  it is negative, the remote server would need to
         send leases to balance the pool.  Once the lts  value  reaches  zero,
         the pool is perfectly balanced (give or take one lease in the case of
         an odd number of total free state leases).

         The current approach is still  something  of  a  hybrid  of  the  old
         approach,   marked   by  the  presence  of  the  max-lease-misbalance
         statement.  This parameter configures what used to  be  a  10%  fixed
         value  in  previous  versions: if lts is less than free+backup * max-
         lease-misbalance percent, then the server will skip balancing a given
         pool (it won't bother moving any leases, even if some leases "should"
         be moved).  The meaning of this value is  also  somewhat  overloaded,
         however, in that it also governs the estimation of when to attempt to
         balance the pool (which may then also be skipped over).   The  oldest
         leases  in  the  free  and backup states are examined.  The time they
         have resided in their respective queues is used  as  an  estimate  to
         indicate how much time it is probable it would take before the leases
         at the top of the list would be consumed (and thus, how long it would
         take  to  use all leases in that state).  This percentage is directly
         multiplied by this time, and fit into the schedule if it falls within
         the  min-balance  and  max-balance  configured values.  The scheduled
         pool check time is only moved in a downwards direction, it  is  never
         increased.  Lastly, if the lts is more than double this number in the
         negative direction, the local server  will  'panic'  and  transmit  a
         Failover  protocol  POOLREQ  message,  in  the  hopes that the remote
         system will be woken up into action.

         Once the lts value exceeds  the  max-lease-misbalance  percentage  of
         total  free  state leases as described above, leases are moved to the
         remote server.  This is done in two passes.

         In the first pass, only leases whose most recent bound  client  would
         have been served by the remote server - according to the Load Balance
         Algorithm (see above split and hba configuration  statements)  -  are
         given  away  to  the  peer.  This first pass will happily continue to
         give away leases, decrementing the lts value by one for  each,  until
         the  lts value has reached the negative of the total number of leases
         multiplied by the max-lease-ownership percentage.  So it  is  through
         this  value that you can permit a small misbalance of the lease pools
         - for the purpose of giving the peer  more  than  a  50/50  share  of
         leases  in  the hopes that their clients might some day return and be
         allocated by the peer (operating normally).  This process is referred
         to  as  'MAC  Address  Affinity',  but  this is somewhat misnamed: it
         applies equally to DHCP Client Identifier options.   Note  also  that
         affinity  is  applied to leases when they enter the state 'free' from
         'expired' or 'released'.  In this case also, leases will not be moved
         from free to backup if the secondary already has more than its share.

         The  second  pass  is  only  entered  into if the first pass fails to
         reduce the lts underneath the  total  number  of  free  state  leases
         multiplied  by the max-lease-ownership percentage.  In this pass, the
         oldest leases are given over to the peer without second thought about
         the  Load  Balance  Algorithm, and this continues until the lts falls
         under this value.  In this way, the local server  will  also  happily
         keep  a  small  percentage  of  the  leases  that would normally load
         balance to itself.

         So, the  max-lease-misbalance  value  acts  as  a  behavioural  gate.
         Smaller values will cause more leases to transition states to balance
         the pools over time, higher values will decrease the amount of change
         (but may lead to pool starvation if there's a run on leases).

         The  max-lease-ownership  value  permits a small (percentage) skew in
         the lease balance of a percentage of the total number of  free  state

         Finally,   the  min-balance  and  max-balance  make  certain  that  a
         scheduled rebalance event happens within a reasonable timeframe  (not
         to be thrown off by, for example, a 7 year old free lease).

         Plausible   values  for  the  percentages  lie  between  0  and  100,
         inclusive, but values over 50 are indistinguishable from one  another
         (once  lts  exceeds  50%  of  the  free state leases, one server must
         therefore have 100% of the leases in its respective free state).   It
         is  recommended  to  select a max-lease-ownership value that is lower
         than the value selected for  the  max-lease-misbalance  value.   max-
         lease-ownership  defaults to 10, and max-lease-misbalance defaults to

         Plausible values for the min-balance and max-balance times also range
         from  0  to  (2^32)-1  (or the limit of your local time_t value), but
         default to values 60 and 3600 respectively (to place  balance  events
         between 1 minute and 1 hour).


       Clients   can  be  separated  into  classes,  and  treated  differently
       depending on what class they are in.    This  separation  can  be  done
       either  with  a conditional statement, or with a match statement within
       the class declaration.   It is possible to specify a limit on the total
       number  of  clients within a particular class or subclass that may hold
       leases at one time, and it is possible to specify automatic subclassing
       based on the contents of the client packet.

       To  add  clients  to  classes  based on conditional evaluation, you can
       specify a matching expression in the class statement:

       class "ras-clients" {
         match if substring (option dhcp-client-identifier, 1, 3) = "RAS";

       Note that whether you use matching expressions or  add  statements  (or
       both)  to  classify  clients, you must always write a class declaration
       for any class that you use.   If there will be no match  statement  and
       no  in-scope  statements  for a class, the declaration should look like

       class "ras-clients" {


       In addition to classes, it  is  possible  to  declare  subclasses.    A
       subclass  is  a class with the same name as a regular class, but with a
       specific submatch expression which is hashed for quick matching.   This
       is  essentially a speed hack - the main difference between five classes
       with match expressions and one class with five subclasses  is  that  it
       will be quicker to find the subclasses.   Subclasses work as follows:

       class "allocation-class-1" {
         match pick-first-value (option dhcp-client-identifier, hardware);

       class "allocation-class-2" {
         match pick-first-value (option dhcp-client-identifier, hardware);

       subclass "allocation-class-1" 1:8:0:2b:4c:39:ad;
       subclass "allocation-class-2" 1:8:0:2b:a9:cc:e3;
       subclass "allocation-class-1" 1:0:0:c4:aa:29:44;

       subnet netmask {
         pool {
           allow members of "allocation-class-1";
         pool {
           allow members of "allocation-class-2";

       The  data  following  the  class  name in the subclass declaration is a
       constant value to use in matching the match expression for  the  class.
       When  class  matching  is  done,  the  server  will  evaluate the match
       expression and then look the result up in the hash table.   If it finds
       a  match,  the  client is considered a member of both the class and the

       Subclasses can be declared  with  or  without  scope.    In  the  above
       example,  the  sole  purpose  of  the subclass is to allow some clients
       access to one address pool, while other clients are given access to the
       other  pool, so these subclasses are declared without scopes.   If part
       of the purpose of the  subclass  were  to  define  different  parameter
       values for some clients, you might want to declare some subclasses with

       In the above example, if you had  a  single  client  that  needed  some
       configuration  parameters,  while  most  didn't,  you  might  write the
       following subclass declaration for that client:

       subclass "allocation-class-2" 1:08:00:2b:a1:11:31 {
         option root-path "samsara:/var/diskless/alphapc";
         filename "/tftpboot/netbsd.alphapc-diskless";

       In this example, we've used subclassing as a  way  to  control  address
       allocation  on  a per-client basis.  However, it's also possible to use
       subclassing in ways that are not specific to clients - for example,  to
       use  the  value of the vendor-class-identifier option to determine what
       values to send in the vendor-encapsulated-options option.   An  example
       of  this  is  shown  under  the VENDOR ENCAPSULATED OPTIONS head in the
       dhcp-options(5) manual page.


       You may specify a limit to the number of clients in a class that can be
       assigned  leases.   The effect of this will be to make it difficult for
       a new client in a class to get an address.   Once a class with  such  a
       limit  has  reached  its limit, the only way a new client in that class
       can get a lease is for an existing  client  to  relinquish  its  lease,
       either  by  letting  it  expire,  or  by  sending a DHCPRELEASE packet.
       Classes with lease limits are specified as follows:

       class "limited-1" {
         lease limit 4;

       This will produce a class in which a maximum of four members may hold a
       lease at one time.


       It  is  possible  to  declare  a spawning class.  A spawning class is a
       class that automatically produces subclasses based on what  the  client
       sends.    The  reason that spawning classes were created was to make it
       possible to create lease-limited classes on the fly.    The  envisioned
       application  is  a  cable-modem  environment  where  the  ISP wishes to
       provide clients at a particular site with more than one IP address, but
       does  not  wish to provide such clients with their own subnet, nor give
       them an unlimited number of IP addresses from the  network  segment  to
       which they are connected.

       Many  cable  modem  head-end  systems  can be configured to add a Relay
       Agent Information option to DHCP packets when relaying them to the DHCP
       server.    These systems typically add a circuit ID or remote ID option
       that uniquely identifies the customer  site.    To  take  advantage  of
       this, you can write a class declaration as follows:

       class "customer" {
         spawn with option agent.circuit-id;
         lease limit 4;

       Now  whenever  a  request comes in from a customer site, the circuit ID
       option will be checked against the class's hash table.   If a  subclass
       is  found that matches the circuit ID, the client will be classified in
       that subclass and  treated  accordingly.    If  no  subclass  is  found
       matching  the  circuit  ID, a new one will be created and logged in the
       dhcpd.leases file, and the client will be classified in this new class.
       Once  the  client  has been classified, it will be treated according to
       the rules of the class, including, in this case, being subject  to  the
       per-site limit of four leases.

       The  use  of the subclass spawning mechanism is not restricted to relay
       agent options - this particular example is given only because it  is  a
       fairly straightforward one.


       In  some  cases,  it  may  be  useful to use one expression to assign a
       client to a particular class, and a second expression to put it into  a
       subclass  of  that  class.   This can be done by combining the match if
       and spawn with statements, or the match if and match statements.    For

       class "jr-cable-modems" {
         match if option dhcp-vendor-identifier = "jrcm";
         spawn with option agent.circuit-id;
         lease limit 4;

       class "dv-dsl-modems" {
         match if opton dhcp-vendor-identifier = "dvdsl";
         spawn with option agent.circuit-id;
         lease limit 16;

       This  allows you to have two classes that both have the same spawn with
       expression without getting the clients in the two classes confused with
       each other.


       The  DHCP  server has the ability to dynamically update the Domain Name
       System.  Within the configuration files, you can define  how  you  want
       the  Domain  Name  System  to  be  updated.  These updates are RFC 2136
       compliant so any DNS server supporting  RFC  2136  should  be  able  to
       accept updates from the DHCP server.

       Two  DNS  update  schemes  are  currently  implemented,  and another is
       planned.   The two that are currently  available  are  the  ad-hoc  DNS
       update mode and the interim DHCP-DNS interaction draft update mode.  If
       and when the DHCP-DNS interaction draft and the  DHCID  draft  make  it
       through  the  IETF standards process, there will be a third mode, which
       will be the standard DNS update  method.    The  DHCP  server  must  be
       configured to use one of the two currently-supported methods, or not to
       do  dns  updates.    This  can  be  done  with  the   ddns-update-style
       configuration parameter.


       The  ad-hoc  Dynamic  DNS  update scheme is now deprecated and does not
       work.  In future releases of the ISC DHCP server, this scheme will  not
       likely  be  available.   The interim scheme works, allows for failover,
       and should now be used.  The following description  is  left  here  for
       informational purposes only.

       The ad-hoc Dynamic DNS update scheme implemented in this version of the
       ISC DHCP server is a prototype design, which does not have much  to  do
       with  the standard update method that is being standardized in the IETF
       DHC working group, but rather implements some very basic,  yet  useful,
       update  capabilities.    This  mode  does  not  work  with the failover
       protocol because it  does  not  account  for  the  possibility  of  two
       different DHCP servers updating the same set of DNS records.

       For  the  ad-hoc DNS update method, the client's FQDN is derived in two
       parts.   First, the hostname is determined.   Then, the domain name  is
       determined, and appended to the hostname.

       The DHCP server determines the client's hostname by first looking for a
       ddns-hostname configuration option, and using that if  it  is  present.
       If  no such option is present, the server looks for a valid hostname in
       the FQDN option sent by the client.  If  one  is  found,  it  is  used;
       otherwise,  if  the  client  sent  a  host-name  option,  that is used.
       Otherwise, if there is a host declaration that applies to  the  client,
       the name from that declaration will be used.  If none of these applies,
       the server will not have a hostname for the client,  and  will  not  be
       able to do a DNS update.

       The  domain  name  is determined from the ddns-domainname configuration
       option.  The default configuration for this option is:

         option server.ddns-domainname = config-option domain-name;

       So if this configuration option is not configured to a different  value
       (over-riding  the  above  default),  or if a domain-name option has not
       been configured for the  client's  scope,  then  the  server  will  not
       attempt to perform a DNS update.

       The client's fully-qualified domain name, derived as we have described,
       is used as the name on which an "A"  record  will  be  stored.   The  A
       record  will contain the IP address that the client was assigned in its
       lease.   If there is already an A record with the same name in the  DNS
       server,  no  update  of  either  the A or PTR records will occur - this
       prevents a client from claiming that its hostname is the name  of  some
       network  server.    For  example,  if  you  have  a  fileserver  called
       "", and the client claims its hostname is "fs", no DNS
       update  will  be  done  for  that  client, and an error message will be

       If the A record update succeeds, a PTR record update for  the  assigned
       IP  address  will  be  done, pointing to the A record.   This update is
       unconditional - it will be done even if another PTR record of the  same
       name  exists.    Since  the  IP  address  has been assigned to the DHCP
       server, this should be safe.

       Please note that the current implementation assumes clients only have a
       single  network  interface.   A client with two network interfaces will
       see unpredictable behavior.   This is considered a  bug,  and  will  be
       fixed  in a later release.   It may be helpful to enable the one-lease-
       per-client parameter so that roaming clients do not trigger  this  same

       The  DHCP protocol normally involves a four-packet exchange - first the
       client sends a DHCPDISCOVER message, then the server sends a DHCPOFFER,
       then  the  client sends a DHCPREQUEST, then the server sends a DHCPACK.
       In the current version of the server, the server will do a  DNS  update
       after  it  has  received  the  DHCPREQUEST,  and before it has sent the
       DHCPACK.   It only sends the DNS update if it has not sent one for  the
       client's  address  before,  in order to minimize the impact on the DHCP

       When the client's lease expires, the DHCP server (if it is operating at
       the  time, or when next it operates) will remove the client's A and PTR
       records from the DNS database.   If the client releases  its  lease  by
       sending  a  DHCPRELEASE  message, the server will likewise remove the A
       and PTR records.


       The interim DNS update scheme  operates  mostly  according  to  several
       drafts that are being considered by the IETF and are expected to become
       standards, but are not yet  standards,  and  may  not  be  standardized
       exactly as currently proposed.   These are:


       Because  our implementation is slightly different than the standard, we
       will briefly document the operation of this update style here.

       The first point to understand about this style of DNS  update  is  that
       unlike  the  ad-hoc  style, the DHCP server does not necessarily always
       update both the A and the PTR records.   The  FQDN  option  includes  a
       flag  which,  when sent by the client, indicates that the client wishes
       to update its  own  A  record.    In  that  case,  the  server  can  be
       configured  either  to  honor  the  client's intentions or ignore them.
       This is done with the statement allow client-updates; or the  statement
       ignore client-updates;.   By default, client updates are allowed.

       If the server is configured to allow client updates, then if the client
       sends a fully-qualified domain name in the FQDN option, the server will
       use  that  name  the  client  sent in the FQDN option to update the PTR
       record.   For example, let us say that the client is a visitor from the
       ""  domain,  whose hostname is "jschmoe".   The server is for
       the "" domain.   The  DHCP  client  indicates  in  the  FQDN
       option that its FQDN is "".   It also indicates that
       it wants to update its own A record.   The DHCP server  therefore  does
       not attempt to set up an A record for the client, but does set up a PTR
       record for the IP address that  it  assigns  the  client,  pointing  at    Once  the  DHCP client has an IP address, it can
       update its own A record, assuming that the "" DNS server will
       allow it to do so.

       If  the  server  is  configured  not to allow client updates, or if the
       client doesn't want to do its own update, the server will simply choose
       a  name  for the client from either the fqdn option (if present) or the
       hostname option (if present).  It will use its own domain name for  the
       client,  just as in the ad-hoc update scheme.  It will then update both
       the A and PTR record, using the name that it chose for the client.   If
       the  client sends a fully-qualified domain name in the fqdn option, the
       server uses only the leftmost part of the domain name - in the  example
       above, "jschmoe" instead of "".

       Further,  if  the  ignore  client-updates;  directive is used, then the
       server will in addition send a response in the DHCP packet,  using  the
       FQDN  Option, that implies to the client that it should perform its own
       updates if it chooses to do so.  With deny client-updates;, a  response
       is sent which indicates the client may not perform updates.

       Also,  if the use-host-decl-names configuration option is enabled, then
       the host declaration's hostname will be used in place of  the  hostname
       option, and the same rules will apply as described above.

       The  other  difference between the ad-hoc scheme and the interim scheme
       is that with the interim scheme, a method is used that allows more than
       one  DHCP  server  to  update  the  DNS  database  without accidentally
       deleting A records that shouldn't be  deleted  nor  failing  to  add  A
       records that should be added.   The scheme works as follows:

       When  the  DHCP  server  issues a client a new lease, it creates a text
       string that is an MD5 hash over the DHCP client's  identification  (see
       draft-ietf-dnsext-dhcid-rr-??.txt  for details).   The update adds an A
       record with the name the server chose and a TXT record  containing  the
       hashed  identifier  string  (hashid).    If  this  update succeeds, the
       server is done.

       If the update fails because the A record already exists, then the  DHCP
       server  attempts  to  add the A record with the prerequisite that there
       must be a TXT record in the same name as the new A record, and that TXT
       record's  contents  must be equal to hashid.   If this update succeeds,
       then the client has its A record and PTR record.   If  it  fails,  then
       the  name  the  client  has been assigned (or requested) is in use, and
       can't be used by the client.   At this point the DHCP server  gives  up
       trying to do a DNS update for the client until the client chooses a new

       The interim DNS update  scheme  is  called  interim  for  two  reasons.
       First,  it  does not quite follow the drafts.   The current versions of
       the drafts call for a new DHCID RRtype, but this is not yet  available.
       The  interim  DNS  update scheme uses a TXT record instead.   Also, the
       existing ddns-resolution draft calls for the DHCP server to put a DHCID
       RR  on  the PTR record, but the interim update method does not do this.
       It is our position that this is not useful, and we are working with the
       author  in  hopes of removing it from the next version of the draft, or
       better understanding why it is considered useful.

       In addition to these differences, the server also does not update  very
       aggressively.  Because each DNS update involves a round trip to the DNS
       server, there is a cost associated with doing updates even if  they  do
       not  actually  modify  the  DNS  database.    So the DHCP server tracks
       whether or not it has updated the record in the past (this  information
       is  stored on the lease) and does not attempt to update records that it
       thinks it has already updated.

       This can lead to cases where the DHCP server adds a  record,  and  then
       the  record  is  deleted  through  some other mechanism, but the server
       never again updates the DNS because  it  thinks  the  data  is  already
       there.    In  this  case the data can be removed from the lease through
       operator intervention, and once this has been done,  the  DNS  will  be
       updated the next time the client renews.


       When  you set your DNS server up to allow updates from the DHCP server,
       you may be exposing it to unauthorized updates.   To  avoid  this,  you
       should  use  TSIG  signatures  -  a method of cryptographically signing
       updates using a shared secret key.   As long as you protect the secrecy
       of  this key, your updates should also be secure.   Note, however, that
       the DHCP protocol itself provides no security,  and  that  clients  can
       therefore  provide information to the DHCP server which the DHCP server
       will  then  use  in  its  updates,  with  the   constraints   described

       The  DNS  server  must be configured to allow updates for any zone that
       the DHCP server will be updating.  For example, let us say that clients
       in  the  domain  will  be  assigned  addresses  on  the subnet.  In that case, you will need  a  key  declaration
       for  the  TSIG  key you will be using, and also two zone declarations -
       one for the zone containing A records that will be updates and one  for
       the zone containing PTR records - for ISC BIND, something like this:

       key DHCP_UPDATER {
         algorithm HMAC-MD5.SIG-ALG.REG.INT;
         secret pRP5FapFoJ95JEL06sv4PQ==;

       zone "" {
            type master;
            file "";
            allow-update { key DHCP_UPDATER; };

       zone "" {
            type master;
            file "10.10.17.db";
            allow-update { key DHCP_UPDATER; };

       You will also have to configure your DHCP server to do updates to these
       zones.   To do so,  you  need  to  add  something  like  this  to  your
       dhcpd.conf file:

       key DHCP_UPDATER {
         algorithm HMAC-MD5.SIG-ALG.REG.INT;
         secret pRP5FapFoJ95JEL06sv4PQ==;

       zone EXAMPLE.ORG. {
         key DHCP_UPDATER;

       zone {
         key DHCP_UPDATER;

       The primary statement specifies the IP address of the name server whose
       zone information is to be updated.

       Note that the zone declarations have to correspond to authority records
       in your name server - in the above example, there must be an SOA record
       for "" and for "".   For example,  if
       there  were  a  subdomain  ""  with no separate SOA, you
       could not write a zone declaration for ""  Also keep in
       mind  that  zone  names in your DHCP configuration should end in a ".";
       this is the preferred syntax.  If you do not end your zone  name  in  a
       ".",  the  DHCP  server will figure it out.  Also note that in the DHCP
       configuration, zone names are not encapsulated in  quotes  where  there
       are in the DNS configuration.

       You should choose your own secret key, of course.  The ISC BIND 8 and 9
       distributions come with a program for  generating  secret  keys  called
       dnssec-keygen.  The version that comes with BIND 9 is likely to produce
       a substantially more random key, so we recommend you use that one  even
       if  you are not using BIND 9 as your DNS server.  If you are using BIND
       9's dnssec-keygen, the above key would be created as follows:

            dnssec-keygen -a HMAC-MD5 -b 128 -n USER DHCP_UPDATER

       If you are using the BIND 8 dnskeygen program,  the  following  command
       will generate a key as seen above:

            dnskeygen -H 128 -u -c -n DHCP_UPDATER

       You  may  wish to enable logging of DNS updates on your DNS server.  To
       do so, you might write a logging statement like the following:

       logging {
            channel update_debug {
                 file "/var/log/update-debug.log";
                 severity  debug 3;
                 print-category yes;
                 print-severity yes;
                 print-time     yes;
            channel security_info    {
                 file "/var/log/";
                 severity  info;
                 print-category yes;
                 print-severity yes;
                 print-time     yes;

            category update { update_debug; };
            category security { security_info; };

       You  must  create  the  /var/log/  and  /var/log/update-
       debug.log files before starting the name server.   For more information
       on configuring ISC BIND, consult the documentation that accompanies it.


       There are three kinds of events that can happen regarding a lease,  and
       it  is  possible  to  declare  statements  that occur when any of these
       events happen.   These events are the commit event, when the server has
       made  a  commitment  of a certain lease to a client, the release event,
       when the client has released the server from its  commitment,  and  the
       expiry event, when the commitment expires.

       To  declare  a  set of statements to execute when an event happens, you
       must use the on statement, followed by the name of the event,  followed
       by  a  series of statements to execute when the event happens, enclosed
       in braces.   Events are used to implement DNS updates,  so  you  should
       not  define  your  own event handlers if you are using the built-in DNS
       update mechanism.

       The built-in version of the DNS update mechanism is in  a  text  string
       towards  the  top  of  server/dhcpd.c.    If you want to use events for
       things other than DNS updates, and you also want DNS updates, you  will
       have  to  start  out by copying this code into your dhcpd.conf file and
       modifying it.


       The include statement

        include "filename";

       The include statement is used to read in a named file, and process  the
       contents of that file as though it were entered in place of the include

       The shared-network statement

        shared-network name {
          [ parameters ]
          [ declarations ]

       The shared-network statement is used to inform  the  DHCP  server  that
       some  IP subnets actually share the same physical network.  Any subnets
       in  a  shared  network  should  be  declared  within  a  shared-network
       statement.   Parameters  specified in the shared-network statement will
       be used  when  booting  clients  on  those  subnets  unless  parameters
       provided at the subnet or host level override them.  If any subnet in a
       shared network has addresses available for  dynamic  allocation,  those
       addresses  are collected into a common pool for that shared network and
       assigned to clients as needed.  There is no way to distinguish on which
       subnet of a shared network a client should boot.

       Name should be the name of the shared network.   This name is used when
       printing debugging messages, so it should be descriptive for the shared
       network.    The  name  may  have  the  syntax  of  a  valid domain name
       (although it will never be used as such), or it may  be  any  arbitrary
       name, enclosed in quotes.

       The subnet statement

        subnet subnet-number netmask netmask {
          [ parameters ]
          [ declarations ]

       The  subnet  statement is used to provide dhcpd with enough information
       to tell whether or not an IP address is on that subnet.  It may also be
       used   to  provide  subnet-specific  parameters  and  to  specify  what
       addresses may be dynamically  allocated  to  clients  booting  on  that
       subnet.   Such addresses are specified using the range declaration.

       The subnet-number should be an IP address or domain name which resolves
       to the subnet number of  the  subnet  being  described.    The  netmask
       should  be  an  IP  address or domain name which resolves to the subnet
       mask of the subnet being described.   The subnet number, together  with
       the  netmask,  are sufficient to determine whether any given IP address
       is on the specified subnet.

       Although a netmask must be given with every subnet declaration,  it  is
       recommended  that if there is any variance in subnet masks at a site, a
       subnet-mask option statement be used in each subnet declaration to  set
       the  desired  subnet  mask, since any subnet-mask option statement will
       override the subnet mask declared in the subnet statement.

       The subnet6 statement

        subnet6 subnet6-number {
          [ parameters ]
          [ declarations ]

       The subnet6 statement is used to provide dhcpd with enough  information
       to tell whether or not an IPv6 address is on that subnet6.  It may also
       be used to provide  subnet-specific  parameters  and  to  specify  what
       addresses  may  be  dynamically  allocated  to  clients booting on that

       The subnet6-number should be an IPv6 network identifier,  specified  as

       The range statement

       range [ dynamic-bootp ] low-address [ high-address];

       For  any  subnet on which addresses will be assigned dynamically, there
       must be at least one range statement.   The range statement  gives  the
       lowest  and  highest IP addresses in a range.   All IP addresses in the
       range should be in the subnet in which the range statement is declared.
       The  dynamic-bootp  flag may be specified if addresses in the specified
       range may be dynamically assigned to BOOTP  clients  as  well  as  DHCP
       clients.    When  specifying  a  single  address,  high-address  can be

       The range6 statement

       range6 low-address high-address;
       range6 subnet6-number;
       range6 subnet6-number temporary;
       range6 address temporary;

       For any IPv6 subnet6 on which addresses will be  assigned  dynamically,
       there  must  be at least one range6 statement. The range6 statement can
       either be the lowest and highest IPv6 addresses in  a  range6,  or  use
       CIDR  notation,  specified as ip6-address/bits. All IP addresses in the
       range6 should be in the  subnet6  in  which  the  range6  statement  is

       The temporay variant makes the prefix (by default on 64 bits) available
       for temporary (RFC 4941) addresses. A new address  per  prefix  in  the
       shared  network  is  computed  at  each  request  with an IA_TA option.
       Release and Confirm ignores temporary addresses.

       Any IPv6 addresses given to hosts with fixed-address6 are excluded from
       the range6, as are IPv6 addresses on the server itself.

       The prefix6 statement

       prefix6 low-address high-address / bits;

       The  prefix6 is the range6 equivalent for Prefix Delegation (RFC 3633).
       Prefixes of bits length are  assigned  between  low-address  and  high-

       Any  IPv6  prefixes  given to static entries (hosts) with fixed-prefix6
       are excluded from the prefix6.

       This statement is currently global but it should have a  shared-network

       The host statement

        host hostname {
          [ parameters ]
          [ declarations ]

       The host declaration provides a scope in which to provide configuration
       information about a specific client, and also provides a way to  assign
       a  client a fixed address.  The host declaration provides a way for the
       DHCP server to identify a DHCP or BOOTP  client,  and  also  a  way  to
       assign the client a static IP address.

       If  it  is  desirable to be able to boot a DHCP or BOOTP client on more
       than one subnet with fixed addresses, more  than  one  address  may  be
       specified  in  the  fixed-address  declaration,  or  more than one host
       statement may be specified matching the same client.

       If client-specific boot parameters must change based on the network  to
       which the client is attached, then multiple host declarations should be
       used.  The host declarations will only match a client if one  of  their
       fixed-address  statements  is  viable on the subnet (or shared network)
       where the client is attached.  Conversely, for a  host  declaration  to
       match  a client being allocated a dynamic address, it must not have any
       fixed-address statements.  You may therefore need  a  mixture  of  host
       declarations   for   any   given   client...some  having  fixed-address
       statements, others without.

       hostname should be a name identifying the host.  If a  hostname  option
       is not specified for the host, hostname is used.

       Host  declarations  are  matched  to  actual  DHCP  or BOOTP clients by
       matching  the  dhcp-client-identifier  option  specified  in  the  host
       declaration  to  the  one  supplied  by  the  client,  or,  if the host
       declaration or the client does  not  provide  a  dhcp-client-identifier
       option,  by  matching the hardware parameter in the host declaration to
       the network hardware address supplied by the client.   BOOTP clients do
       not  normally provide a dhcp-client-identifier, so the hardware address
       must be used for all clients that may boot using the BOOTP protocol.

       DHCPv6 servers can use the host-identifier option parameter in the host
       declaration,  and  specify  any  option  with a fixed value to identify

       Please be aware that only the  dhcp-client-identifier  option  and  the
       hardware  address can be used to match a host declaration, or the host-
       identifier option parameter for DHCPv6 servers.   For  example,  it  is
       not  possible to match a host declaration to a host-name option.   This
       is because the host-name option cannot be guaranteed to be  unique  for
       any  given  client,  whereas both the hardware address and dhcp-client-
       identifier option are at least theoretically guaranteed to be unique to
       a given client.

       The group statement

        group {
          [ parameters ]
          [ declarations ]

       The group statement is used simply to apply one or more parameters to a
       group of  declarations.    It  can  be  used  to  group  hosts,  shared
       networks, subnets, or even other groups.


       The  allow  and  deny statements can be used to control the response of
       the DHCP server to various sorts  of  requests.   The  allow  and  deny
       keywords actually have different meanings depending on the context.  In
       a pool context, these keywords can be used to set up access  lists  for
       address  allocation  pools.   In  other  contexts,  the keywords simply
       control general server behavior with respect to clients based on scope.
       In  a  non-pool context, the ignore keyword can be used in place of the
       deny keyword to prevent logging of denied requests.


       The following usages of allow and deny will work in any scope, although
       it is not recommended that they be used in pool declarations.

       The unknown-clients keyword

        allow unknown-clients;
        deny unknown-clients;
        ignore unknown-clients;

       The  unknown-clients  flag  is  used  to  tell  dhcpd whether or not to
       dynamically assign addresses  to  unknown  clients.    Dynamic  address
       assignment to unknown clients is allowed by default.  An unknown client
       is simply a client that has no host declaration.

       The use of this option  is  now  deprecated.   If  you  are  trying  to
       restrict  access  on your network to known clients, you should use deny
       unknown-clients; inside of your address pool, as  described  under  the

       The bootp keyword

        allow bootp;
        deny bootp;
        ignore bootp;

       The bootp flag is used to tell dhcpd whether or not to respond to bootp
       queries.  Bootp queries are allowed by default.

       This option does not satisfy the  requirement  of  failover  peers  for
       denying  dynamic bootp clients.  The deny dynamic bootp clients; option
       should be used instead. See the ALLOW AND DENY WITHIN POOL DECLARATIONS
       section of this man page for more details.

       The booting keyword

        allow booting;
        deny booting;
        ignore booting;

       The  booting  flag  is  used to tell dhcpd whether or not to respond to
       queries from a particular client.  This keyword only has  meaning  when
       it appears in a host declaration.   By default, booting is allowed, but
       if it is disabled for a particular client, then that client will not be
       able to get an address from the DHCP server.

       The duplicates keyword

        allow duplicates;
        deny duplicates;

       Host  declarations  can  match client messages based on the DHCP Client
       Identifier option or based on the client's network  hardware  type  and
       MAC  address.    If  the MAC address is used, the host declaration will
       match any client with that MAC address - even  clients  with  different
       client  identifiers.    This  doesn't  normally happen, but is possible
       when one computer has more than one operating system installed on it  -
       for example, Microsoft Windows and NetBSD or Linux.

       The duplicates flag tells the DHCP server that if a request is received
       from a client that matches the MAC address of a host  declaration,  any
       other  leases  matching  that  MAC  address  should be discarded by the
       server, even if the UID is not the same.   This is a violation  of  the
       DHCP  protocol, but can prevent clients whose client identifiers change
       regularly from holding many leases  at  the  same  time.   By  default,
       duplicates are allowed.

       The declines keyword

        allow declines;
        deny declines;
        ignore declines;

       The  DHCPDECLINE  message  is used by DHCP clients to indicate that the
       lease the server has offered is not valid.   When the server receives a
       DHCPDECLINE  for  a  particular  address,  it  normally  abandons  that
       address,  assuming  that  some  unauthorized  system   is   using   it.
       Unfortunately,  a  malicious  or  buggy  client  can, using DHCPDECLINE
       messages, completely exhaust the DHCP server's allocation  pool.    The
       server  will  reclaim  these  leases,  but  while the client is running
       through the pool, it may cause serious thrashing in  the  DNS,  and  it
       will  also  cause  the  DHCP  server  to forget old DHCP client address

       The declines flag tells  the  DHCP  server  whether  or  not  to  honor
       DHCPDECLINE  messages.   If it is set to deny or ignore in a particular
       scope, the DHCP server will not respond to DHCPDECLINE messages.

       The client-updates keyword

        allow client-updates;
        deny client-updates;

       The client-updates flag tells the DHCP server whether or not  to  honor
       the  client's  intention to do its own update of its A record.  This is
       only relevant when doing interim DNS updates.   See  the  documentation
       under the heading THE INTERIM DNS UPDATE SCHEME for details.

       The leasequery keyword

        allow leasequery;
        deny leasequery;

       The  leasequery  flag  tells  the  DHCP server whether or not to answer
       DHCPLEASEQUERY packets. The answer to a DHCPLEASEQUERY packet  includes
       information about a specific lease, such as when it was issued and when
       it will expire. By default,  the  server  will  not  respond  to  these


       The  uses  of the allow and deny keywords shown in the previous section
       work pretty  much  the  same  way  whether  the  client  is  sending  a
       DHCPDISCOVER or a DHCPREQUEST message - an address will be allocated to
       the client (either the old address it's requesting, or a  new  address)
       and  then  that  address  will be tested to see if it's okay to let the
       client have it.   If the client requested it, and it's  not  okay,  the
       server will send a DHCPNAK message.   Otherwise, the server will simply
       not respond to the client.   If it is okay to give the address  to  the
       client, the server will send a DHCPACK message.

       The  primary  motivation  behind  pool  declarations is to have address
       allocation pools whose allocation policies are  different.    A  client
       may be denied access to one pool, but allowed access to another pool on
       the same network segment.   In order for this to work,  access  control
       has  to be done during address allocation, not after address allocation
       is done.

       When a DHCPREQUEST message  is  processed,  address  allocation  simply
       consists  of looking up the address the client is requesting and seeing
       if it's still available for the client.  If it is, then the DHCP server
       checks  both  the  address  pool permit lists and the relevant in-scope
       allow and deny statements to see if it's okay to give the lease to  the
       client.   In the case of a DHCPDISCOVER message, the allocation process
       is done as described previously in the ADDRESS ALLOCATION section.

       When declaring permit lists for address allocation pools, the following
       syntaxes are recognized following the allow or deny keywords:


       If  specified, this statement either allows or prevents allocation from
       this pool to any client that has a host declaration (i.e.,  is  known).
       A  client  is known if it has a host declaration in any scope, not just
       the current scope.


       If specified, this statement either allows or prevents allocation  from
       this  pool  to  any  client  that has no host declaration (i.e., is not

        members of "class";

       If specified, this statement either allows or prevents allocation  from
       this pool to any client that is a member of the named class.

        dynamic bootp clients;

       If  specified, this statement either allows or prevents allocation from
       this pool to any bootp client.

        authenticated clients;

       If specified, this statement either allows or prevents allocation  from
       this  pool  to  any  client  that has been authenticated using the DHCP
       authentication protocol.   This is not yet supported.

        unauthenticated clients;

       If specified, this statement either allows or prevents allocation  from
       this  pool to any client that has not been authenticated using the DHCP
       authentication protocol.   This is not yet supported.

        all clients;

       If specified, this statement either allows or prevents allocation  from
       this  pool  to all clients.   This can be used when you want to write a
       pool declaration for some reason, but hold it in reserve, or  when  you
       want  to  renumber  your  network  quickly, and thus want the server to
       force all clients that have been allocated addresses from this pool  to
       obtain new addresses immediately when they next renew.

        after time;

       If  specified, this statement either allows or prevents allocation from
       this pool after a given date. This can be used when you  want  to  move
       clients  from one pool to another. The server adjusts the regular lease
       time so that the latest expiry time is  at  the  given  time+min-lease-
       time.   A short min-lease-time enforces a step change, whereas a longer
       min-lease-time allows for a gradual  change.   time  is  either  second
       since  epoch,  or  a  UTC  time string e.g.  4 2007/08/24 09:14:32 or a
       string with time zone offset in  seconds  e.g.  4  2007/08/24  11:14:32


       The adaptive-lease-time-threshold statement

         adaptive-lease-time-threshold percentage;

         When  the  number  of  allocated leases within a pool rises above the
         percentage given in this statement, the  DHCP  server  decreases  the
         lease  length  for  new  clients  within  this pool to min-lease-time
         seconds. Clients renewing an already valid (long) leases get at least
         the  remaining  time  from the current lease. Since the leases expire
         faster, the server may either recover  more  quickly  or  avoid  pool
         exhaustion  entirely.  Once the number of allocated leases drop below
         the threshold, the server reverts back to normal lease times.   Valid
         percentages are between 1 and 99.

       The always-broadcast statement

         always-broadcast flag;

         The  DHCP  and BOOTP protocols both require DHCP and BOOTP clients to
         set the broadcast bit in the flags field of the BOOTP message header.
         Unfortunately,  some  DHCP  and  BOOTP  clients  do  not do this, and
         therefore may not receive responses from the DHCP server.   The  DHCP
         server  can  be  made to always broadcast its responses to clients by
         setting this flag to 'on' for the  relevant  scope;  relevant  scopes
         would  be inside a conditional statement, as a parameter for a class,
         or as a parameter for a host declaration.   To avoid creating  excess
         broadcast traffic on your network, we recommend that you restrict the
         use of this option to as few clients as possible.   For example,  the
         Microsoft  DHCP  client is known not to have this problem, as are the
         OpenTransport and ISC DHCP clients.

       The always-reply-rfc1048 statement

         always-reply-rfc1048 flag;

         Some BOOTP clients expect RFC1048-style responses, but do not  follow
         RFC1048  when sending their requests.   You can tell that a client is
         having this problem if  it  is  not  getting  the  options  you  have
         configured for it and if you see in the server log the message "(non-
         rfc1048)" printed with each BOOTREQUEST that is logged.

         If you want to send rfc1048 options to such a client, you can set the
         always-reply-rfc1048  option  in  that client's host declaration, and
         the DHCP server will respond with an  RFC-1048-style  vendor  options
         field.    This  flag  can  be  set  in any scope, and will affect all
         clients covered by that scope.

       The authoritative statement


         not authoritative;

         The  DHCP  server  will  normally  assume  that   the   configuration
         information  about a given network segment is not known to be correct
         and is not authoritative.  This is so that if a naive user installs a
         DHCP  server not fully understanding how to configure it, it does not
         send  spurious  DHCPNAK  messages  to  clients  that  have   obtained
         addresses from a legitimate DHCP server on the network.

         Network  administrators  setting  up  authoritative  DHCP servers for
         their networks should always write authoritative; at the top of their
         configuration  file  to  indicate  that  the  DHCP server should send
         DHCPNAK messages to misconfigured clients.   If  this  is  not  done,
         clients  will  be  unable  to get a correct IP address after changing
         subnets until their old lease has expired, which could take  quite  a
         long time.

         Usually,  writing  authoritative; at the top level of the file should
         be sufficient.   However, if a DHCP server is to be set up so that it
         is  aware  of  some  networks  for which it is authoritative and some
         networks for which it is not, it may be more appropriate  to  declare
         authority on a per-network-segment basis.

         Note  that the most specific scope for which the concept of authority
         makes any sense is the physical network segment -  either  a  shared-
         network  statement or a subnet statement that is not contained within
         a shared-network statement.  It is not meaningful to specify that the
         server is authoritative for some subnets within a shared network, but
         not authoritative for others, nor is it meaningful  to  specify  that
         the  server  is  authoritative  for  some  host  declarations and not

       The boot-unknown-clients statement

         boot-unknown-clients flag;

         If the boot-unknown-clients statement is present and has a  value  of
         false  or  off,  then  clients for which there is no host declaration
         will not be allowed to obtain IP addresses.   If  this  statement  is
         not  present  or has a value of true or on, then clients without host
         declarations will be allowed to obtain IP addresses, as long as those
         addresses  are  not  restricted  by  allow and deny statements within
         their pool declarations.

       The db-time-format statement

         db-time-format [ default | local ] ;

         The DHCP server software  outputs  several  timestamps  when  writing
         leases  to  persistent storage.  This configuration parameter selects
         one of two output formats.  The default format prints the day,  date,
         and  time  in  UTC, while the local format prints the system seconds-
         since-epoch, and helpfully provides the day and time  in  the  system
         timezone  in  a comment.  The time formats are described in detail in
         the dhcpd.leases(5) manpage.

       The ddns-hostname statement

         ddns-hostname name;

         The name parameter should be  the  hostname  that  will  be  used  in
         setting  up  the client's A and PTR records.   If no ddns-hostname is
         specified  in  scope,  then  the  server  will  derive  the  hostname
         automatically,  using  an  algorithm  that  varies  for  each  of the
         different update methods.

       The ddns-domainname statement

         ddns-domainname name;

         The name parameter should be the domain name that will be appended to
         the client's hostname to form a fully-qualified domain-name (FQDN).

       The ddns-rev-domainname statement

         ddns-rev-domainname  name;  The  name  parameter should be the domain
         name that will be appended to the client's  reversed  IP  address  to
         produce a name for use in the client's PTR record.   By default, this
         is "", but the default can be overridden here.

         The reversed IP address to which this  domain  name  is  appended  is
         always  the  IP  address  of  the  client,  in  dotted quad notation,
         reversed - for example, if the IP address assigned to the  client  is,  then  the  reversed  IP  address is   So a
         client with that IP address would, by default, be given a PTR  record

       The ddns-update-style parameter

         ddns-update-style style;

         The  style  parameter  must  be  one of ad-hoc, interim or none.  The
         ddns-update-style statement is only meaningful in the outer  scope  -
         it  is  evaluated once after reading the dhcpd.conf file, rather than
         each time a client is assigned an IP address, so there is no  way  to
         use different DNS update styles for different clients. The default is

       The ddns-updates statement

          ddns-updates flag;

         The ddns-updates parameter controls whether or not  the  server  will
         attempt  to  do a DNS update when a lease is confirmed.   Set this to
         off if the server should not attempt to do updates within  a  certain
         scope.  The ddns-updates parameter is on by default.   To disable DNS
         updates in all scopes, it is preferable to use the  ddns-update-style
         statement, setting the style to none.

       The default-lease-time statement

         default-lease-time time;

         Time should be the length in seconds that will be assigned to a lease
         if the client requesting the  lease  does  not  ask  for  a  specific
         expiration  time.  This is used for both DHCPv4 and DHCPv6 leases (it
         is also known as the "valid lifetime" in DHCPv6).

       The delayed-ack and max-ack-delay statements

         delayed-ack count; max-ack-delay microseconds;

         Count should be an integer value from zero to 2^16-1, and defaults to
         28.   The  count  represents  how many DHCPv4 replies maximum will be
         queued pending transmission until after a database commit event.   If
         this  number  is reached, a database commit event (commonly resulting
         in fsync() and representing a performance penalty) will be made,  and
         the  reply  packets  will be transmitted in a batch afterwards.  This
         preserves the RFC2131 direction  that  "stable  storage"  be  updated
         prior  to  replying  to  clients.  Should the DHCPv4 sockets "go dry"
         (select() returns immediately with no read sockets),  the  commit  is
         made and any queued packets are transmitted.

         Similarly, microseconds indicates how many microseconds are permitted
         to pass inbetween queuing a packet pending an fsync,  and  performing
         the  fsync.   Valid  values  range  from 0 to 2^32-1, and defaults to
         250,000 (1/4 of a second).

         Please note  that  as  delayed-ack  is  currently  experimental,  the
         delayed-ack  feature  is  not  compiled  in  by  default, but must be
         enabled at compile time with './configure --enable-delayed-ack'.

       The do-forward-updates statement

         do-forward-updates flag;

         The do-forward-updates statement instructs  the  DHCP  server  as  to
         whether it should attempt to update a DHCP client's A record when the
         client acquires or renews a lease.   This  statement  has  no  effect
         unless  DNS  updates  are  enabled  and  ddns-update-style  is set to
         interim.    Forward  updates  are  enabled  by  default.    If   this
         statement  is  used  to disable forward updates, the DHCP server will
         never attempt to update the client's A record,  and  will  only  ever
         attempt  to  update the client's PTR record if the client supplies an
         FQDN that should be placed in the PTR record using the  fqdn  option.
         If  forward updates are enabled, the DHCP server will still honor the
         setting of the client-updates flag.

       The dynamic-bootp-lease-cutoff statement

         dynamic-bootp-lease-cutoff date;

         The dynamic-bootp-lease-cutoff statement sets the ending time for all
         leases  assigned dynamically to BOOTP clients.  Because BOOTP clients
         do not have any way of renewing leases, and  don't  know  that  their
         leases  could expire, by default dhcpd assigns infinite leases to all
         BOOTP clients.  However, it may make sense in some situations to  set
         a cutoff date for all BOOTP leases - for example, the end of a school
         term, or the time at night when a facility is closed and all machines
         are required to be powered off.

         Date  should be the date on which all assigned BOOTP leases will end.
         The date is specified in the form:

                                 W YYYY/MM/DD HH:MM:SS

         W is the day of the week expressed as a number from zero (Sunday)  to
         six  (Saturday).  YYYY is the year, including the century.  MM is the
         month expressed as a number from 1 to 12.   DD  is  the  day  of  the
         month,  counting from 1.  HH is the hour, from zero to 23.  MM is the
         minute and SS is the second.   The  time  is  always  in  Coordinated
         Universal Time (UTC), not local time.

       The dynamic-bootp-lease-length statement

         dynamic-bootp-lease-length length;

         The dynamic-bootp-lease-length statement is used to set the length of
         leases dynamically assigned to BOOTP clients.   At some sites, it may
         be  possible to assume that a lease is no longer in use if its holder
         has not used BOOTP or DHCP to get its address within a  certain  time
         period.    The  period is specified in length as a number of seconds.
         If a client reboots using BOOTP during the timeout period, the  lease
         duration  is reset to length, so a BOOTP client that boots frequently
         enough will never lose its lease.  Needless to  say,  this  parameter
         should be adjusted with extreme caution.

       The filename statement

         filename "filename";

         The filename statement can be used to specify the name of the initial
         boot file which is to be loaded by a client.  The filename should  be
         a filename recognizable to whatever file transfer protocol the client
         can be expected to use to load the file.

       The fixed-address declaration

         fixed-address address [, address ... ];

         The fixed-address declaration is used to assign one or more fixed  IP
         addresses  to a client.  It should only appear in a host declaration.
         If more than one address is supplied, then when the client boots,  it
         will be assigned the address that corresponds to the network on which
         it is booting.   If  none  of  the  addresses  in  the  fixed-address
         statement are valid for the network to which the client is connected,
         that client will not  match  the  host  declaration  containing  that
         fixed-address   declaration.    Each  address  in  the  fixed-address
         declaration should be either an IP address  or  a  domain  name  that
         resolves to one or more IP addresses.

       The fixed-address6 declaration

         fixed-address6 ip6-address ;

         The  fixed-address6  declaration  is  used  to  assign  a  fixed IPv6
         addresses to a client.  It should only appear in a host declaration.

       The get-lease-hostnames statement

         get-lease-hostnames flag;

         The get-lease-hostnames statement is used to tell  dhcpd  whether  or
         not  to  look  up  the domain name corresponding to the IP address of
         each address in the lease pool and use  that  address  for  the  DHCP
         hostname  option.   If flag is true, then this lookup is done for all
         addresses in the current scope.   By default, or if flag is false, no
         lookups are done.

       The hardware statement

         hardware hardware-type hardware-address;

         In  order  for  a BOOTP client to be recognized, its network hardware
         address must  be  declared  using  a  hardware  clause  in  the  host
         statement.   hardware-type  must  be  the name of a physical hardware
         interface type.   Currently, only the ethernet and  token-ring  types
         are  recognized,  although  support  for  a  fddi  hardware type (and
         others) would also be desirable.  The hardware-address  should  be  a
         set  of  hexadecimal  octets (numbers from 0 through ff) separated by
         colons.   The hardware statement may also be used for DHCP clients.

       The host-identifier option statement

         host-identifier option option-name option-data;

         This identifies a DHCPv6 client in a host statement.  option-name  is
         any  option,  and  option-data  is  the value for the option that the
         client will send. The option-data must be a constant value.

       The infinite-is-reserved statement

         infinite-is-reserved flag;

         ISC DHCP now supports 'reserved' leases.  See the section on RESERVED
         LEASES  below.   If  this  flag  is on, the server will automatically
         reserve leases allocated  to  clients  which  requested  an  infinite
         (0xffffffff) lease-time.

         The default is off.

       The lease-file-name statement

         lease-file-name name;

         Name  should  be  the  name  of  the  DHCP  server's lease file.   By
         default, this is DBDIR/dhcpd.leases.   This statement must appear  in
         the  outer  scope  of  the configuration file - if it appears in some
         other scope, it will have no effect.  Furthermore, it has  no  effect
         if  overridden  by  the  -lf  flag  or  the PATH_DHCPD_DB environment

       The limit-addrs-per-ia statement

         limit-addrs-per-ia number;

         By default, the DHCPv6 server will limit clients to one IAADDR per IA
         option,  meaning  one address.  If you wish to permit clients to hang
         onto multiple addresses at a time, configure a larger number here.

         Note that there is no present  method  to  configure  the  server  to
         forcibly  configure the client with one IP address per each subnet on
         a shared network.  This is left to future work.

       The dhcpv6-lease-file-name statement

         dhcpv6-lease-file-name name;

         Name is the name of the lease file to use if and only if  the  server
         is  running in DHCPv6 mode.  By default, this is DBDIR/dhcpd6.leases.
         This statement, like lease-file-name, must appear in the outer  scope
         of the configuration file.  It has no effect if overridden by the -lf
         flag or the PATH_DHCPD6_DB environment  variable.   If  dhcpv6-lease-
         file-name  is not specified, but lease-file-name is, the latter value
         will be used.

       The local-port statement

         local-port port;

         This statement causes the DHCP server to listen for DHCP requests  on
         the UDP port specified in port, rather than on port 67.

       The local-address statement

         local-address address;

         This  statement  causes  the  DHCP server to listen for DHCP requests
         sent to the specified address,  rather  than  requests  sent  to  all
         addresses.  Since serving directly attached DHCP clients implies that
         the server must respond to requests sent to the all-ones IP  address,
         this  option  cannot  be  used  if  clients  are on directly attached is only realistically useful for a  server  whose  only
         clients are reached via unicasts, such as via DHCP relay agents.

         Note:   This  statement  is only effective if the server was compiled
         using the USE_SOCKETS #define statement, which is default on a  small
         number  of  operating  systems,  and  must  be  explicitly  chosen at
         compile-time for all others.  You can  be  sure  if  your  server  is
         compiled with USE_SOCKETS if you see lines of this format at startup:

          Listening on Socket/eth0

         Note  also  that since this bind()s all DHCP sockets to the specified
         address, that only one address may be supported  in  a  daemon  at  a
         given time.

       The log-facility statement

         log-facility facility;

         This statement causes the DHCP server to do all of its logging on the
         specified log facility once the dhcpd.conf file has been  read.    By
         default  the  DHCP server logs to the daemon facility.   Possible log
         facilities include auth, authpriv,  cron,  daemon,  ftp,  kern,  lpr,
         mail,  mark,  news,  ntp,  security,  syslog,  user, uucp, and local0
         through local7.   Not all of these facilities are  available  on  all
         systems,  and  there  may  be  other  facilities  available  on other

         In addition to setting this  value,  you  may  need  to  modify  your
         syslog.conf  file  to  configure  logging  of  the DHCP server.   For
         example, you might add a line like this:

              local7.debug /var/log/dhcpd.log

         The syntax of the syslog.conf file may be different on some operating
         systems  -  consult  the  syslog.conf manual page to be sure.  To get
         syslog to start logging to the new file, you must  first  create  the
         file  with correct ownership and permissions (usually, the same owner
         and permissions of your /var/log/messages or  /usr/adm/messages  file
         should  be  fine) and send a SIGHUP to syslogd.  Some systems support
         log rollover using a shell script  or  program  called  newsyslog  or
         logrotate, and you may be able to configure this as well so that your
         log file doesn't grow uncontrollably.

         Because the log-facility setting  is  controlled  by  the  dhcpd.conf
         file,  log  messages  printed  while  parsing  the dhcpd.conf file or
         before parsing it are logged to the default log facility.  To prevent
         this,  see  the  README  file  included with this distribution, which
         describes  how  to  change  the  default  log  facility.   When  this
         parameter  is  used,  the  DHCP  server  prints its startup message a
         second time after parsing the configuration file,  so  that  the  log
         will be as complete as possible.

       The max-lease-time statement

         max-lease-time time;

         Time should be the maximum length in seconds that will be assigned to
         a lease.   The only exception to this is  that  Dynamic  BOOTP  lease
         lengths,  which  are  not specified by the client, are not limited by
         this maximum.

       The min-lease-time statement

         min-lease-time time;

         Time should be the minimum length in seconds that will be assigned to
         a lease.

       The min-secs statement

         min-secs seconds;

         Seconds  should be the minimum number of seconds since a client began
         trying to acquire a new lease before the DHCP server will respond  to
         its  request.   The  number  of  seconds  is based on what the client
         reports, and the maximum value that the  client  can  report  is  255
         seconds.    Generally,  setting  this  to one will result in the DHCP
         server not responding to  the  client's  first  request,  but  always
         responding to its second request.

         This can be used to set up a secondary DHCP server which never offers
         an address to a client until the primary  server  has  been  given  a
         chance  to  do  so.    If the primary server is down, the client will
         bind to the secondary server, but  otherwise  clients  should  always
         bind  to  the primary.   Note that this does not, by itself, permit a
         primary server and a secondary server to share a pool of dynamically-
         allocatable addresses.

       The next-server statement

         next-server server-name;

         The  next-server statement is used to specify the host address of the
         server from which the initial boot file (specified  in  the  filename
         statement)  is  to  be  loaded.    Server-name should be a numeric IP
         address or a domain name.

       The omapi-port statement

         omapi-port port;

         The omapi-port statement causes the DHCP server to listen  for  OMAPI
         connections  on  the  specified port.   This statement is required to
         enable the OMAPI protocol, which is used to examine  and  modify  the
         state of the DHCP server as it is running.

       The one-lease-per-client statement

         one-lease-per-client flag;

         If  this flag is enabled, whenever a client sends a DHCPREQUEST for a
         particular lease, the server will automatically free any other leases
         the  client  holds.    This  presumes  that  when  the client sends a
         DHCPREQUEST,  it  has  forgotten  any  lease  not  mentioned  in  the
         DHCPREQUEST  -  i.e.,  the client has only a single network interface
         and it does not remember leases it's holding on networks to which  it
         is  not  currently  attached.    Neither  of  these  assumptions  are
         guaranteed or provable, so  we  urge  caution  in  the  use  of  this

       The pid-file-name statement

         pid-file-name name;

         Name  should be the name of the DHCP server's process ID file.   This
         is the file in which the DHCP server's process ID is stored when  the
         server  starts.    By  default,  this is RUNDIR/   Like the
         lease-file-name statement, this statement must appear  in  the  outer
         scope  of  the configuration file.  It has no effect if overridden by
         the -pf flag or the PATH_DHCPD_PID environment variable.

         The dhcpv6-pid-file-name statement

            dhcpv6-pid-file-name name;

            Name is the name of the pid file to use if and only if the  server
            is  running in DHCPv6 mode.  By default, this is DBDIR/
            This statement, like pid-file-name, must appear in the outer scope
            of  the configuration file.  It has no effect if overridden by the
            -pf  flag  or  the  PATH_DHCPD6_PID  environment   variable.    If
            dhcpv6-pid-file-name  is  not specified, but pid-file-name is, the
            latter value will be used.

         The ping-check statement

            ping-check flag;

            When the DHCP server is considering dynamically allocating  an  IP
            address  to a client, it first sends an ICMP Echo request (a ping)
            to the address being assigned.   It waits for a second, and if  no
            ICMP  Echo response has been heard, it assigns the address.   If a
            response is heard, the lease is abandoned, and the server does not
            respond to the client.

            This   ping   check  introduces  a  default  one-second  delay  in
            responding to DHCPDISCOVER messages, which can be  a  problem  for
            some  clients.   The default delay of one second may be configured
            using the ping-timeout parameter.   The  ping-check  configuration
            parameter can be used to control checking - if its value is false,
            no ping check is done.

         The ping-timeout statement

            ping-timeout seconds;

            If the DHCP server determined it should send an ICMP echo  request
            (a  ping)  because  the ping-check statement is true, ping-timeout
            allows you to configure how many seconds the  DHCP  server  should
            wait  for  an  ICMP  Echo  response  to  be heard, if no ICMP Echo
            response has been received before the timeout expires, it  assigns
            the  address.  If a response is heard, the lease is abandoned, and
            the server does not respond to the client.  If no  value  is  set,
            ping-timeout defaults to 1 second.

         The preferred-lifetime statement

            preferred-lifetime seconds;

            IPv6  addresses have 'valid' and 'preferred' lifetimes.  The valid
            lifetime determines at what point at lease might be said  to  have
            expired,  and  is  no  longer useable.  A preferred lifetime is an
            advisory condition to help applications move off  of  the  address
            and onto currently valid addresses (should there still be any open
            TCP sockets or similar).

            The preferred lifetime defaults to the renew+rebind timers, or 3/4
            the default lease time if none were specified.

         The remote-port statement

            remote-port port;

            This  statement  causes the DHCP server to transmit DHCP responses
            to DHCP clients upon the UDP port specified in port,  rather  than
            on  port 68.  In the event that the UDP response is transmitted to
            a  DHCP  Relay,  the  server   generally   uses   the   local-port
            configuration value.  Should the DHCP Relay happen to be addressed
            as, however, the DHCP Server transmits its  response  to
            the  remote-port  configuration  value.   This  is  generally only
            useful for testing purposes, and this configuration  value  should
            generally not be used.

         The server-identifier statement

            server-identifier hostname;

            The  server-identifier  statement  can be used to define the value
            that is sent in the DHCP Server  Identifier  option  for  a  given
            scope.    The  value  specified must be an IP address for the DHCP
            server,  and  must  be  reachable  by  all  clients  served  by  a
            particular scope.

            The  use  of  the server-identifier statement is not recommended -
            the only reason to use it is to  force  a  value  other  than  the
            default  value  to  be  sent  on occasions where the default value
            would be incorrect.   The default value is the  first  IP  address
            associated  with  the  physical  network  interface  on  which the
            request arrived.

            The usual case where the server-identifier statement needs  to  be
            sent  is  when  a physical interface has more than one IP address,
            and the one being sent by default isn't appropriate  for  some  or
            all clients served by that interface.  Another common case is when
            an alias is defined for the purpose  of  having  a  consistent  IP
            address  for  the  DHCP server, and it is desired that the clients
            use this IP address when contacting the server.

            Supplying  a  value  for  the  dhcp-server-identifier  option   is
            equivalent to using the server-identifier statement.

         The server-duid statement

            server-duid LLT [ hardware-type timestamp hardware-address ] ;

            server-duid EN enterprise-number enterprise-identifier ;

            server-duid LL [ hardware-type hardware-address ] ;

            The server-duid statement configures the server DUID. You may pick
            either LLT (link local address plus time), EN (enterprise), or  LL
            (link local).

            If you choose LLT or LL, you may specify the exact contents of the
            DUID.  Otherwise the server will generate a DUID of the  specified

            If  you  choose EN, you must include the enterprise number and the

            The default server-duid type is LLT.

         The server-name statement

            server-name name ;

            The server-name statement can be used to inform the client of  the
            name  of the server from which it is booting.   Name should be the
            name that will be provided to the client.

         The site-option-space statement

            site-option-space name ;

            The site-option-space statement can be used to determine from what
            option  space site-local options will be taken.   This can be used
            in much the same way as the vendor-option-space statement.   Site-
            local  options  in  DHCP are those options whose numeric codes are
            greater than 224.   These options are intended  for  site-specific
            uses, but are frequently used by vendors of embedded hardware that
            contains  DHCP  clients.    Because  site-specific   options   are
            allocated  on  an  ad  hoc  basis,  it  is quite possible that one
            vendor's DHCP client might use the same option code  that  another
            vendor's  client  uses, for different purposes.   The site-option-
            space option can be used  to  assign  a  different  set  of  site-
            specific   options   for   each  such  vendor,  using  conditional
            evaluation (see dhcp-eval (5) for details).

         The stash-agent-options statement

            stash-agent-options flag;

            If the stash-agent-options parameter is true for a  given  client,
            the  server  will  record the relay agent information options sent
            during the client's initial DHCPREQUEST message  when  the  client
            was  in  the  SELECTING  state  and behave as if those options are
            included in  all  subsequent  DHCPREQUEST  messages  sent  in  the
            RENEWING  state.    This  works  around a problem with relay agent
            information options, which is that  they  usually  not  appear  in
            DHCPREQUEST  messages  sent  by  the client in the RENEWING state,
            because such messages are unicast directly to the server  and  not
            sent through a relay agent.

         The update-conflict-detection statement

            update-conflict-detection flag;

            If  the  update-conflict-detection  parameter  is true, the server
            will perform standard  DHCID  multiple-client,  one-name  conflict
            detection.   If  the parameter has been set false, the server will
            skip this check and instead simply tear down any previous bindings
            to install the new binding without question.  The default is true.

         The update-optimization statement

            update-optimization flag;

            If  the update-optimization parameter is false for a given client,
            the server will attempt a DNS update for that client each time the
            client  renews  its  lease,  rather than only attempting an update
            when it appears to be necessary.   This will allow the DNS to heal
            from  database  inconsistencies  more easily, but the cost is that
            the DHCP server must do many  more  DNS  updates.    We  recommend
            leaving  this  option  enabled, which is the default.  This option
            only affects the behavior of the interim DNS  update  scheme,  and
            has no effect on the ad-hoc DNS update scheme.   If this parameter
            is not specified, or is true, the DHCP  server  will  only  update
            when  the  client information changes, the client gets a different
            lease, or the client's lease expires.

         The update-static-leases statement

            update-static-leases flag;

            The update-static-leases flag, if enabled, causes the DHCP  server
            to  do  DNS  updates  for  clients even if those clients are being
            assigned their IP address using a fixed-address statement  -  that
            is, the client is being given a static assignment.   This can only
            work with the interim DNS update scheme.   It is  not  recommended
            because  the  DHCP  server  has no way to tell that the update has
            been done, and therefore will not delete the record when it is not
            in  use.    Also, the server must attempt the update each time the
            client  renews  its  lease,  which  could   have   a   significant
            performance impact in environments that place heavy demands on the
            DHCP server.

         The use-host-decl-names statement

            use-host-decl-names flag;

            If the use-host-decl-names parameter is true  in  a  given  scope,
            then  for  every  host  declaration  within  that  scope, the name
            provided for the host declaration will be supplied to  the  client
            as its hostname.   So, for example,

                group {
                  use-host-decl-names on;

                  host joe {
                    hardware ethernet 08:00:2b:4c:29:32;

            is equivalent to

                  host joe {
                    hardware ethernet 08:00:2b:4c:29:32;
                    option host-name "joe";

            An  option  host-name  statement  within  a  host declaration will
            override the use of the name in the host declaration.

            It should be noted here that most DHCP clients  completely  ignore
            the  host-name option sent by the DHCP server, and there is no way
            to configure them not to do this.   So you generally have a choice
            of  either  not  having  any hostname to client IP address mapping
            that the client will recognize, or  doing  DNS  updates.    It  is
            beyond  the  scope  of  this document to describe how to make this

         The use-lease-addr-for-default-route statement

            use-lease-addr-for-default-route flag;

            If the use-lease-addr-for-default-route parameter  is  true  in  a
            given  scope,  then  instead of sending the value specified in the
            routers option (or sending no value at all), the IP address of the
            lease  being  assigned  is  sent  to the client.   This supposedly
            causes Win95 machines to ARP for all IP addresses,  which  can  be
            helpful  if  your router is configured for proxy ARP.   The use of
            this feature is not recommended, because it won't  work  for  many
            DHCP clients.

         The vendor-option-space statement

            vendor-option-space string;

            The  vendor-option-space  parameter  determines  from  what option
            space vendor options are taken.   The use  of  this  configuration
            parameter  is  illustrated  in the dhcp-options(5) manual page, in
            the VENDOR ENCAPSULATED OPTIONS section.


       Sometimes it's helpful to be able to set the value  of  a  DHCP  server
       parameter  based  on some value that the client has sent.   To do this,
       you can use  expression  evaluation.    The  dhcp-eval(5)  manual  page
       describes  how  to  write  expressions.    To  assign  the result of an
       evaluation to an option, define the option as follows:

         my-parameter = expression ;

       For example:

         ddns-hostname = binary-to-ascii (16, 8, "-",
                                          substring (hardware, 1, 6));


       It's often useful to allocate a single address to a single  client,  in
       approximate  perpetuity.   Host  statements  with fixed-address clauses
       exist to a certain extent to  serve  this  purpose,  but  because  host
       statements  are  intended  to  approximate 'static configuration', they
       suffer from not being referenced in a littany of other Server Services,
       such as dynamic DNS, failover, 'on events' and so forth.

       If  a  standard  dynamic  lease, as from any range statement, is marked
       'reserved', then the server will only allocate this lease to the client
       it is identified by (be that by client identifier or hardware address).

       In practice, this means that the lease follows the normal state engine,
       enters ACTIVE state when the client is bound  to  it,  expires,  or  is
       released,  and  any  events or services that would normally be supplied
       during these events are processed normally, as with any  other  dynamic
       lease.   The  only  difference  is that failover servers treat reserved
       leases as special when they enter the FREE  or  BACKUP  states  -  each
       server  applies the lease into the state it may allocate from - and the
       leases are not placed on the queue for  allocation  to  other  clients.
       Instead  they  may  only  be 'found' by client identity.  The result is
       that the lease is only offered to the returning client.

       Care should probably be taken to ensure that the client  only  has  one
       lease within a given subnet that it is identified by.

       Leases  may  be  set  'reserved'  either  through OMAPI, or through the
       'infinite-is-reserved' configuration option (if this is  applicable  to
       your environment and mixture of clients).

       It  should  also be noted that leases marked 'reserved' are effectively
       treated the same as leases marked 'bootp'.


       DHCP option statements are documented  in  the  dhcp-options(5)  manual


       Expressions used in DHCP option statements and elsewhere are documented
       in the dhcp-eval(5) manual page.


       dhcpd(8),  dhcpd.leases(5),  dhcp-options(5),  dhcp-eval(5),   RFC2132,


       dhcpd.conf(5)  was  written  by  Ted  Lemon under a contract with Vixie
       Labs.   Funding for this  project  was  provided  by  Internet  Systems
       Consortium.  Information about Internet Systems Consortium can be found