Provided by: libsane_1.0.22-2ubuntu2_i386 bug

NAME

       sane-microtek - SANE backend for Microtek scanners

DESCRIPTION

       The  sane-microtek  library implements a SANE (Scanner Access Now Easy)
       backend that  provides  access  to  the  "second  generation"  Microtek
       scanners.   At  present,  the  following hardware is known to work with
       this backend:

              Microtek ScanMaker E2, E3, E6
              Microtek ScanMaker II, IIG, IIHR, IISP, III
              Microtek ScanMaker 35t, 35t+, 45t
              Microtek ScanMaker 600GS, 600ZS (see bug notes)
              Agfa StudioScan
              Agfa StudioScan II, StudioScan IIsi
              Agfa Arcus II (but not the "Arcus")
              Agfa DuoScan (preliminary)
              Vobis "Highscreen Realscan"
              Microtek Color PageWiz (preliminary)

              Transparent Media Adapter
              Document AutoFeeder

       The driver supports line art, halftone,  8bpp  gray,  and  24bpp  color
       scans  at  normal and "expanded" resolutions (i.e. 1200x1200 on an E6),
       fast scans for color previews, and downloadable gamma tables.

       The supported scanners are all SCSI scanners.  However,  some  parallel
       port  models  may work (under Linux), if they use a parport->scsi chip,
       and if you can find a scsi->parport driver.  This is known  to  be  the
       case for the Color PageWiz.

       The  driver  does not support the newest Microtek scanners, such as the
       V330 and V660, which use a new and very different SCSI-II command  set.
       For those, try the alternate microtek2 backend.  Most non-SCSI scanners
       would use the new command set.  Most scanners newer than the  Scanmaker
       E6 would use the new command set.

       If you own a Microtek scanner other than the ones listed above, tell us
       what happens --- see the BUGS section at the end of this document.

       Although this manual page is generally updated with each  release,  up-
       to-date  information  on  new releases and extraneous helpful hints are
       available from the backend homepage:
              http://www.mir.com/mtek/

DEVICE NAMES

       This backend expects device names of the form:

              special

       Where special is  the  UNIX  path-name  for  the  special  device  that
       corresponds  to the scanner.  The special device name must be a generic
       SCSI device or a symlink to such a device.  Under Linux, such a  device
       name could be /dev/sga or /dev/sge, for example.

CONFIGURATION

       The  contents  of the microtek.conf file is a list of device names that
       correspond to Microtek scanners.  Empty lines and lines starting with a
       hash mark (#) are ignored.  A sample configuration file is shown below:

              /dev/scanner
              # this is a comment
              /dev/sge

       The configuration file may also contain the special tokens norealcal or
       noprecal.  norealcal  will  disable  the  use  of  magic,  undocumented
       scanner calibration commands which are known to work on the E6, but may
       not work with other models.  noprecal will disable logic which tries to
       avoid   scanner  precalibration.   This  logic  would  only  have  been
       activated if the magic calibration code was turned off.

FILES

       /etc/sane.d/microtek.conf
              The  backend  configuration  file  (see  also   description   of
              SANE_CONFIG_DIR below).

       /usr/lib/sane/libsane-microtek.a
              The static library implementing this backend.

       /usr/lib/sane/libsane-microtek.so
              The shared library implementing this backend (present on systems
              that support dynamic loading).

ENVIRONMENT

       SANE_CONFIG_DIR
              This environment variable specifies the list of directories that
              may contain the configuration file.  Under UNIX, the directories
              are separated by a colon (`:'), under OS/2, they  are  separated
              by  a  semi-colon  (`;').   If  this  variable  is  not set, the
              configuration file  is  searched  in  two  default  directories:
              first,   the   current  working  directory  (".")  and  then  in
              /etc/sane.d.  If the value of the environment variable ends with
              the  directory separator character, then the default directories
              are searched after the explicitly  specified  directories.   For
              example,  setting SANE_CONFIG_DIR to "/tmp/config:" would result
              in  directories  "tmp/config",  ".",  and  "/etc/sane.d"   being
              searched (in this order).

       SANE_DEBUG_MICROTEK
              If the library was compiled with debugging support enabled, this
              environment variable controls the debug level for this  backend.
              A  value of 128 requests maximally copious debug output; smaller
              levels reduce verbosity.

SEE ALSO

       sane(7), sane-scsi(5)

AUTHOR

       Matt Marjanovic

BUGS

       Known bugs/limitations are:

              Brightness and contrast broken.
              The 600GS is grayscale only, and will  lock  up  if  you  select
              color.     (Unfortunately,    the    600GS    and    600ZS   are
              indistinguishable by software.)

       i.e. don't complain about these --- but if brightness  and/or  contrast
       do work for you, please tell me.

       If  your scanner locks up, try setting the norealcal or noprecal option
       in the configuration file (first one, then both), and see if it  helps.
       (If it does, report it.)

       Send   lengthy   bug   reports   and   new   scanner   information   to
       mtek-bugs@mir.com.  All bug reports and new  scanner  inquiries  should
       include  an  error log file.  You can generate copious stderr output by
       setting the SANE_DEBUG_MICROTEK environment variable  described  above.
       For example:

              setenv SANE_DEBUG_MICROTEK 128

       More  general  comments,  suggestions, and inquiries about frontends or
       SANE  should  go  to   sane-devel@lists.alioth.debian.org,   the   SANE
       Developers       mailing       list.      Have      a      look      at
       http://www.sane-project.org/mailing-lists.html concerning  subscription
       to sane-devel.

                                  13 Jul 2008                 sane-microtek(5)