Provided by: srecord_1.56-1_i386
srec_ti_txt - Texas Instruments ti-txt (MSP430) file format
The ti-TXT format is used by the Texas Instruments MSP430 familty
The TI-TXT hex format supports 16-bit hexadecimal data. It consists of
one or more sections, followed by the end-of-file indicator.
Each section consistes of an at (@) sign followed a execution start
address (in hexadecimal), and newline, and then data bytes (in
hexadecimal). The section address is followed by a newline. There are
to be 16 data bytes per line, except for the last line in a section.
The end-of-file indicator is the letter q followed by a newline. The
end-of-file indicator mandatory.
In general, binary data will expand in sized by approximately 3.0 times
when represented with this format.
Here is an example ti-txt file taken from the reference below:
31 40 00 03 B2 40 80 5A 20 01 D2 D3 22 00 D2 E3
21 00 3F 40 E8 FD 1F 83 FE 23 F9 3F
http://www.ti.com/lit/pdf/slau101, section A.2. Note: the portion
which says addresses must be even, and the number of data bytes in a
section must be even, is wrong.
srec_ti_txt version 1.56
Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
2007, 2008, 2009, 2010 Peter Miller
The srec_ti_txt program comes with ABSOLUTELY NO WARRANTY; for details
use the 'srec_ti_txt -VERSion License' command. This is free software
and you are welcome to redistribute it under certain conditions; for
details use the 'srec_ti_txt -VERSion License' command.
Peter Miller E-Mail: firstname.lastname@example.org
/\/\* WWW: http://miller.emu.id.au/pmiller/