Provided by: isc-dhcp-client_4.1.1-P1-17ubuntu8_i386 bug


       dhclient - Dynamic Host Configuration Protocol Client


       dhclient  [ -4 | -6 ] [ -S ] [ -N [ -N...  ] ] [ -T [ -T...  ] ] [ -P [
       -P...  ] ] [ -p port ] [ -d ] [ -e VAR=value ] [ -q ] [ -1 ] [ -r |  -x
       ] [ -lf lease-file ] [ -pf pid-file ] [ -cf config-file ] [ -sf script-
       file ] [ -s server ] [ -g relay ] [ -n ] [ -nw ]  [  -w  ]  [  -v  ]  [
       --version ] [ if0 [ ...ifN ] ]


       The Internet Systems Consortium DHCP Client, dhclient, provides a means
       for configuring one or more network interfaces using the  Dynamic  Host
       Configuration  Protocol, BOOTP protocol, or if these protocols fail, by
       statically assigning an address.


       The DHCP protocol allows a host  to  contact  a  central  server  which
       maintains  a  list of IP addresses which may be assigned on one or more
       subnets.   A DHCP client may request an address  from  this  pool,  and
       then  use  it  on a temporary basis for communication on network.   The
       DHCP protocol also provides a mechanism  whereby  a  client  can  learn
       important  details  about  the network to which it is attached, such as
       the location of a default router, the location of a name server, and so

       If  given the -4 command line argument (default), dhclient will use the
       DHCPv4 protocol to obtain an IPv4 address and configuration parameters.

       If given the -6 command line argument, dhclient  will  use  the  DHCPv6
       protocol  to  obtain  whatever  IPv6 addresses are available along with
       configuration parameters. But with -S it  uses  Information-request  to
       get only (i.e., without address) stateless configuration parameters.

       The default DHCPv6 behavior is modified too with -T which asks for IPv6
       temporary addresses, one set per -T flag.  -P enables the  IPv6  prefix
       delegation.   As  temporary addresses or prefix delegation disables the
       normal address query, -N restores it. Note it is not recommended to mix
       queries  of  different  types together, or even to share the lease file
       between them.

       If given the --version command line argument, dhclient will  print  its
       version number and exit.

       On   startup,   dhclient  reads  the  dhclient.conf  for  configuration
       instructions.   It then gets a list of all the network interfaces  that
       are configured in the current system.   For each interface, it attempts
       to configure the interface using the DHCP protocol.

       In order to keep track of  leases  across  system  reboots  and  server
       restarts,  dhclient  keeps a list of leases it has been assigned in the
       dhclient.leases(5) file.   On startup, after reading the  dhclient.conf
       file,  dhclient  reads  the  dhclient.leases file to refresh its memory
       about what leases it has been assigned.

       When a new lease is  acquired,  it  is  appended  to  the  end  of  the
       dhclient.leases  file.    In  order  to  prevent the file from becoming
       arbitrarily  large,  from  time  to  time  dhclient   creates   a   new
       dhclient.leases  file from its in-core lease database.  The old version
       of the dhclient.leases file is retained under the name dhclient.leases~
       until the next time dhclient rewrites the database.

       Old  leases are kept around in case the DHCP server is unavailable when
       dhclient is first invoked (generally during  the  initial  system  boot
       process).    In  that  event,  old leases from the dhclient.leases file
       which have not yet expired are tested, and if they are determined to be
       valid,  they  are  used  until  either  they  expire or the DHCP server
       becomes available.

       A mobile host which may sometimes need to access a network on which  no
       DHCP server exists may be preloaded with a lease for a fixed address on
       that network.   When all attempts to contact a DHCP server have failed,
       dhclient  will  try  to  validate the static lease, and if it succeeds,
       will use that lease until it is restarted.

       A mobile host may also travel to some networks on  which  DHCP  is  not
       available  but  BOOTP  is.    In  that  case, it may be advantageous to
       arrange with the network  administrator  for  an  entry  on  the  BOOTP
       database, so that the host can boot quickly on that network rather than
       cycling through the list of old leases.


       The names of the network interfaces that  dhclient  should  attempt  to
       configure  may be specified on the command line.  If no interface names
       are specified on the command line dhclient will normally  identify  all
       network  interfaces,  eliminating non-broadcast interfaces if possible,
       and attempt to configure each interface.

       It  is  also  possible  to  specify   interfaces   by   name   in   the
       dhclient.conf(5)  file.   If interfaces are specified in this way, then
       the client will only configure interfaces that are either specified  in
       the  configuration  file  or  on  the command line, and will ignore all
       other interfaces.

       If the DHCP client should listen and transmit on a port other than  the
       standard (port 68), the -p flag may used.  It should be followed by the
       udp port number that dhclient should use.  This is  mostly  useful  for
       debugging purposes.  If a different port is specified for the client to
       listen on and transmit  on,  the  client  will  also  use  a  different
       destination port - one less than the specified port.

       The  DHCP  client  normally  transmits  any  protocol messages it sends
       before acquiring an IP address  to,,  the  IP  limited
       broadcast  address.    For debugging purposes, it may be useful to have
       the server transmit these messages to some other address.   This can be
       specified  with  the -s flag, followed by the IP address or domain name
       of the destination.  This feature is not supported by DHCPv6.

       For testing purposes, the giaddr field of all packets that  the  client
       sends can be set using the -g flag, followed by the IP address to send.
       This is only useful for testing, and should not be expected to work  in
       any consistent or useful way.

       The  DHCP  client  will  normally  run  in  the foreground until it has
       configured an interface,  and  then  will  revert  to  running  in  the
       background.    To  run  force  dhclient  to  always run as a foreground
       process, the -d flag should be specified.  This is useful when  running
       the  client  under  a  debugger,  or  when running it out of inittab on
       System V systems.

       The dhclient daemon creates its  own  environment  when  executing  the
       dhclient-script  to  do  the grunt work of interface configuration.  To
       define extra environment variables and their values, use the  -e  flag,
       followed by the environment variable name and value assignment, just as
       one would assign a variable in a shell.  Eg: -e IF_METRIC=1

       The client normally prints no output during its startup  sequence.   It
       can  be  made  to emit verbose messages displaying the startup sequence
       events until it has acquired an address by  supplying  the  -v  command
       line  argument.   In  either  case,  the client logs messages using the
       syslog (3) facility.  A  -q  command  line  argument  is  provided  for
       backwards compatibility, but since dhclient is quiet by default, it has
       no effect.

       The client normally doesn't release the current  lease  as  it  is  not
       required  by  the DHCP protocol.  Some cable ISPs require their clients
       to notify the server if they wish to release an  assigned  IP  address.
       The  -r  flag explicitly releases the current lease, and once the lease
       has been released, the client exits.

       The -x flag tells any  currently  running  client  to  exit  gracefully
       without releasing leases first.

       If the client is killed by a signal (for example at shutdown or reboot)
       it won't execute the dhclient-script (8) at exit. However if  you  shut
       the  client  down  gracefully  with  -r or -x it will execute dhclient-
       script (8) at shutdown with the specific reason for calling the  script

       The  -1  flag  will  cause  dhclient to try once to get a lease.  If it
       fails, dhclient exits with exit code two. In DHCPv6 the  -1  flag  sets
       the   max   duration   of   the   initial  exchange  to  timeout  (from
       dhclient.conf, default sixty seconds).

       The DHCP  client  normally  gets  its  configuration  information  from
       ETCDIR/dhclient.conf,  its  lease  database from DBDIR/dhclient.leases,
       stores its  process  ID  in  a  file  called  RUNDIR/,  and
       configures  the network interface using CLIENTBINDIR/dhclient-script To
       specify different names and/or locations for these files, use the  -cf,
       -lf, -pf and -sf flags, respectively, followed by the name of the file.
       This can be particularly useful if, for example, DBDIR  or  RUNDIR  has
       not yet been mounted when the DHCP client is started.

       The DHCP client normally exits if it isn't able to identify any network
       interfaces to configure.   On laptop computers and other computers with
       hot-swappable  I/O buses, it is possible that a broadcast interface may
       be added after system startup.   The -w flag can be used to  cause  the
       client  not  to  exit  when  it doesn't find any such interfaces.   The
       omshell (1) program can then be  used  to  notify  the  client  when  a
       network  interface  has  been  added or removed, so that the client can
       attempt to configure an IP address on that interface.

       The DHCP client can  be  directed  not  to  attempt  to  configure  any
       interfaces  using  the  -n  flag.   This is most likely to be useful in
       combination with the -w flag.

       The client can also be  instructed  to  become  a  daemon  immediately,
       rather  than waiting until it has acquired an IP address.   This can be
       done by supplying the -nw flag.


       The syntax of the dhclient.conf(5) file is discussed separately.


       The DHCP client provides  some  ability  to  control  it  while  it  is
       running, without stopping it.  This capability is provided using OMAPI,
       an API for manipulating remote objects.  OMAPI clients connect  to  the
       client  using  TCP/IP,  authenticate, and can then examine the client's
       current status and make changes to it.

       Rather than implementing the underlying OMAPI protocol  directly,  user
       programs  should  use  the  dhcpctl API or OMAPI itself.   Dhcpctl is a
       wrapper that handles some of the housekeeping chores  that  OMAPI  does
       not  do automatically.   Dhcpctl and OMAPI are documented in dhcpctl(3)
       and omapi(3).   Most things you'd want to do with  the  client  can  be
       done directly using the omshell(1) command, rather than having to write
       a special program.


       The control object allows you to shut the client  down,  releasing  all
       leases  that  it  holds and deleting any DNS records it may have added.
       It also allows  you  to  pause  the  client  -  this  unconfigures  any
       interfaces the client is using.   You can then restart it, which causes
       it to reconfigure those interfaces.    You  would  normally  pause  the
       client  prior  to going into hibernation or sleep on a laptop computer.
       You would then resume it after the power comes back.   This  allows  PC
       cards  to  be  shut down while the computer is hibernating or sleeping,
       and then reinitialized to their previous state once the computer  comes
       out of hibernation or sleep.

       The  control  object has one attribute - the state attribute.   To shut
       the client down, set its state attribute to 2.   It will  automatically
       do  a  DHCPRELEASE.    To  pause it, set its state attribute to 3.   To
       resume it, set its state attribute to 4.


       CLIENTBINDIR/dhclient-script,                     ETCDIR/dhclient.conf,
       DBDIR/dhclient.leases, RUNDIR/, DBDIR/dhclient.leases~.


       dhcpd(8),     dhcrelay(8),     dhclient-script(8),    dhclient.conf(5),
       dhclient.leases(5), dhcp-eval(5).


       dhclient(8) has been written for Internet  Systems  Consortium  by  Ted
       Lemon  in  cooperation  with  Vixie  Enterprises.   To learn more about
       Internet Systems Consortium,  see  To  learn  more
       about Vixie Enterprises, see

       This client was substantially modified and enhanced by Elliot Poger for
       use on Linux while  he  was  working  on  the  MosquitoNet  project  at

       The  current  version owes much to Elliot's Linux enhancements, but was
       substantially reorganized and partially rewritten by Ted Lemon so as to
       use  the same networking framework that the Internet Systems Consortium
       DHCP server uses.   Much system-specific configuration code  was  moved
       into  a  shell  script so that as support for more operating systems is
       added, it will not be necessary to port  and  maintain  system-specific
       configuration  code  to  these  operating  systems - instead, the shell
       script can invoke the native tools to accomplish the same purpose.