Provided by: aegis_4.24.3-2_i386 bug

NAME

        aegis move file - rename one or more files as part of a change

SYNOPSIS

        aegis -MoVe_file [ option...  ] old-name new-name [ old1 new1 [ old2
        new2 ] ]
        aegis -MoVe_file -List [ option...  ]
        aegis -MoVe_file -Help

DESCRIPTION

        The aegis -MoVe_file command is used to copy a file into a change and
        change its name at the same time.

        The named files will be copied from the baseline (old-file) into the
        development directory (new-file), and added to the list of files in
        the change.

        Warning: If there is already files in the development directory of
        either the old-name or the new-name they will be overwritten.

        The old-file in the development directory will contain 1KB of random
        text.  The random text is sufficiently revolting that most compilers
        will give error messages, should the file be referenced accidentally.
        This is often very helpful when moving include files.

        You may rename directories.  All the files in the old-name directory
        tree will be renamed to be below the new-name directory tree.

   File Name Interpretation
        The aegis program will attempt to determine the project file names
        from the file names given on the command line.  All file names are
        stored within aegis projects as relative to the root of the baseline
        directory tree.  The development directory and the integration
        directory are shadows of this baseline directory, and so these
        relative names apply here, too.  Files named on the command line are
        first converted to absolute paths if necessary.  They are then
        compared with the baseline path, the development directory path, and
        the integration directory path, to determine a baseline-relative name.
        It is an error if the file named is outside one of these directory
        trees.

        The -BAse_RElative option may be used to cause relative filenames to
        be interpreted as relative to the baseline path; absolute filenames
        will still be compared with the various paths in order to determine a
        baseline-relative name.

        The relative_filename_preference in the user configuration file may be
        used to modify this default behavior.  See aeuconf(5) for more
        information.

   Process Side Effects
        This command will cancel any build or test registrations, because
        adding another file logically invalidates them.

        When the change files are listed (aegis -List Change_Files -TERse) the
        new files (new-name) will appear in the listing, and the removed files
        (old-name) will not appear in the terse listing.  Similarly, when the
        project files are listed with an explicit change number (aegis -List
        Project_Files -TERse -Change N) none of the change's files, including
        both the new and removed files, will appear in the terse listing.
        These two features are very helpful when calling aegis from within a
        DMT to generate the list of source files.

   Notification
        The new_file_command and remove_file_command in the project config
        file are run, if set.  The project_file_command is also run, if set,
        and if there has been an integration recently.  See aepconf(5) for
        more information.

WHITEOUT

        Aegis provides you with what is often called a "view path" which
        indicates to development tools (compilers, build systems, etc) look
        first in the development directory, then in the branch baseline, and
        so on up to the trunk baseline.

        The problem with view paths is that in order to remove files, you need
        some kind of "whiteout" to say "stop looking, it's been removed."

        When you user the aerm(1) or aemv(1) commands, this means "add
        information to this change which will remove the file from the
        baseline when this change is integrated".  I.e. while the change is in
        the being developed state, the file is only "removed" in the
        development directory - it's still present in the baseline, and will
        be until the change is successfully integrated.

        When you use the aerm(1) or aemv(1) commands, Aegis will create a 1K
        file to act as the whiteout.  It's contents are rather ugly so that if
        you compile or include the "removed" file accidentally, you get a
        fatal error.  This will remind you to remove obsolete references.

        When the change in integrated, the removed file is not copied/linked
        from the baseline to the integration directory, and is not copied from
        the development directory.  At this time it is physically gone (no
        whiteout).  It is assumed that because of the error inducing whiteout
        all old references were found and fixed while the change was in the
        being developed state.

   File Manifests
        When generating list of files to be compiled or linked, it is
        important that the file manifest be generated from information known
        by Aegis, rather than from the file system.  This is for several
        reasons:

        (a) Aegis knows exactly what (source) files are where, whereas
            everything else is inferring Aegis' knowledge; and

        (b) looking in the file system is hard when the view path is longer
            that 2 directories (and Aegis' branching method can make it
            arbitrarily long); and

        (c) The whiteout files, and anything else left "lying around", will
            confuse any method which interrogates the file system.

        The easiest way to use Aegis' file knowledge is with something like an
        awk(1) script processing the Aegis file lists.  For example, you can
        do this with make(1) as follows:
                # generate the file manifest
                manifest.make.inc: manifest.make.awk
                     ( aegis -l cf -ter ; aegis -l pf -ter ) | \
                     awk -f manifest.make.awk > manifest.make.inc
                # now include the file manifest
                include manifest.make.inc
        Note: this would be inefficient of you did it once per directory, but
        there is nothing stopping you writing numerous assignments into the
        manifest.make.inc file, all in one pass.

        It is possible to do the same thing with Aegis' report generator (see
        aer(1) for more information), but this is more involved than the
        awk(1) script.  However, with the information "straight from the
        horse's mouth" as it were, it can also be much smarter.

        This file manifest would become out-of-date without an interlock to
        Aegis' file operations commands.  By using the project-file_command
        and change_file_command fields of the project config file (see
        aepconf(5) for more information), you can delete this file at
        strategic times.
                /* run when the change file manifest is altered */
                change_file_command = "rm -f manifest.make.inc";
                /* run when the project file manifest is altered */
                project_file_command = "rm -f manifest.make.inc";
        The new file manifest will thus be re-built during the next aeb(1)
        command.

   Options and Preferences
        There is a -No-WhiteOut option, which may be used to suppress whiteout
        files when you use the aerm(1) and aemv(1) commands.  There is a
        corresponding -WhiteOut option, which is usually the default.

        There is a whiteout_preference field in the user preferences file (see
        aeuconf(5) for more information) if you want to set this option more
        permanently.

   Whiteout File Templates
        The whiteout_template field of the project config file may be used to
        produce language-specific error files.  If no whiteout template entry
        matches, a very ugly 1KB file will be produced - it should induce
        compiler errors for just about any language.

        If you want a more human-readable error message, entries such as
                whiteout_template =
                [
                     {
                     pattern = [ "*.[ch]" ];
                     body = "#error This file has been removed.";
                     }
                ];
        can be very effective (this example assumes gcc(1) is being used).

        If it is essential that no whiteout file be produced, say for C source
        files, you could use a whiteout template such as
                whiteout_template =
                [
                     { pattern = [ "*.c" ]; }
                ];
        because an absent body sub-field means generate no whiteout file at
        all.

        You may have more than one whiteout template entry, but note that the
        order of the entries is important.  The first entry which matches will
        be used.

   Notification
        On successful completion of this command, the notifications usually
        performed by the aerm(1), aenf(1) and aent(1) commands are run, as
        appropriate.  These include the project_file_command, new_file_-
        command, new_test_command and remove_file_command fields of the
        project config file.  See aepconf(5) for more information.

OPTIONS

        The following options are understood:

        -Change number
                This option may be used to specify a particular change within
                a project.  See aegis(1) for a complete description of this
                option.

        -Help
                This option may be used to obtain more information about how
                to use the aegis program.

        -List
                This option may be used to obtain a list of suitable subjects
                for this command.  The list may be more general than expected.

        -Not_Logging
                This option may be used to disable the automatic logging of
                output and errors to a file.  This is often useful when
                several aegis commands are combined in a shell script.

        -Project name
                This option may be used to select the project of interest.
                When no -Project option is specified, the AEGIS_PROJECT
                environment variable is consulted.  If that does not exist,
                the user's $HOME/.aegisrc file is examined for a default
                project field (see aeuconf(5) for more information).  If that
                does not exist, when the user is only working on changes
                within a single project, the project name defaults to that
                project.  Otherwise, it is an error.

        -TERse
                This option may be used to cause listings to produce the bare
                minimum of information.  It is usually useful for shell
                scripts.

        -Verbose
                This option may be used to cause aegis to produce more output.
                By default aegis only produces output on errors.  When used
                with the -List option this option causes column headings to be
                added.

        -Wait   This option may be used to require Aegis commands to wait for
                access locks, if they cannot be obtained immediately.
                Defaults to the user's lock_wait_preference if not specified,
                see aeuconf(5) for more information.

        -No_Wait
                This option may be used to require Aegis commands to emit a
                fatal error if access locks cannot be obtained immediately.
                Defaults to the user's lock_wait_preference if not specified,
                see aeuconf(5) for more information.

        -WhiteOut
                This option may be used to request that deleted files be
                replaced by a "whiteout" file in the development directory.
                The idea is that compiling such a file will result in a fatal
                error, in order that all references may be found.  This is
                usually the default.

        -No_WhiteOut
                This option may be used to request that no "whiteout" file be
                placed in the development directory.

        See also aegis(1) for options common to all aegis commands.

        All options may be abbreviated; the abbreviation is documented as the
        upper case letters, all lower case letters and underscores (_) are
        optional.  You must use consecutive sequences of optional letters.

        All options are case insensitive, you may type them in upper case or
        lower case or a combination of both, case is not important.

        For example: the arguments "-project, "-PROJ" and "-p" are all
        interpreted to mean the -Project option.  The argument "-prj" will not
        be understood, because consecutive optional characters were not
        supplied.

        Options and other command line arguments may be mixed arbitrarily on
        the command line, after the function selectors.

        The GNU long option names are understood.  Since all option names for
        aegis are long, this means ignoring the extra leading '-'.  The
        "--option=value" convention is also understood.

RECOMMENDED ALIAS

        The recommended alias for this command is
        csh%    alias aemv 'aegis -mv \!* -v'
        sh$     aemv(){aegis -mv "$@" -v}

ERRORS

        It is an error if the change is not in the being developed state.
        It is an error if the change is not assigned to the current user.
        It is an error if either file is already in the change.

EXIT STATUS

        The aegis command will exit with a status of 1 on any error.  The
        aegis command will only exit with a status of 0 if there are no
        errors.

ENVIRONMENT VARIABLES

        See aegis(1) for a list of environment variables which may affect this
        command.  See aepconf(5) for the project configuration file's
        project_specific field for how to set environment variables for all
        commands executed by Aegis.

SEE ALSO

        aecp(1) copy files into a change

        aedb(1) begin development of a change

        aemvu(1)
                undo the rename files as part of a change

        aenf(1) add files to be created by a change

        aenfu(1)
                remove files to be created by a change

        aerm(1) add files to be deleted by a change

        aermu(1)
                remove files to be deleted by a change

        aeuconf(5)
                user configuration file format

COPYRIGHT

        aegis version 4.24.3.D001
        Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
        2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Peter
        Miller

        The aegis program comes with ABSOLUTELY NO WARRANTY; for details use
        the 'aegis -VERSion License' command.  This is free software and you
        are welcome to redistribute it under certain conditions; for details
        use the 'aegis -VERSion License' command.

AUTHOR

        Peter Miller   E-Mail:   millerp@canb.auug.org.au
        /\/\*             WWW:   http://www.canb.auug.org.au/~millerp/