Provided by: eject_2.1.5+deb1+cvs20081104-8_i386
eject - eject removable media
eject [-vnrsfmqp] [<name>]
eject [-vn] -d
eject [-vn] -a on|off|1|0 [<name>]
eject [-vn] -c slot [<name>]
eject [-vn] -i on|off|1|0 [<name>]
eject [-vn] -t [<name>]
eject [-vn] -T [<name>]
eject [-vn] -x <speed> [<name>]
eject [-vn] -X [<name>]
Eject allows removable media (typically a CD-ROM, floppy disk, tape, or
JAZ or ZIP disk) to be ejected under software control. The command can
also control some multi-disc CD-ROM changers, the auto-eject feature
supported by some devices, and close the disc tray of some CD-ROM
The device corresponding to <name> is ejected. The name can be a device
file or mount point, either a full path or with the leading "/dev",
"/media" or "/mnt" omitted. If no name is specified, the default name
"cdrom" is used.
There are four different methods of ejecting, depending on whether the
device is a CD-ROM, SCSI device, removable floppy, or tape. By default
eject tries all four methods in order until it succeeds.
If the device is currently mounted, it is unmounted before ejecting.
-h This option causes eject to display a brief description of the
-v This makes eject run in verbose mode; more information is
displayed about what the command is doing.
-d If invoked with this option, eject lists the default device name.
This option controls the auto-eject mode, supported by some
devices. When enabled, the drive automatically ejects when the
device is closed.
With this option a CD slot can be selected from an ATAPI/IDE CD-
ROM changer. Linux 2.0 or higher is required to use this feature.
The CD-ROM drive can not be in use (mounted data CD or playing a
music CD) for a change request to work. Please also note that the
first slot of the changer is referred to as 0, not 1.
This option controls locking of the hardware eject button. When
enabled, the drive will not be ejected when the button is pressed.
This is useful when you are carrying a laptop in a bag or case and
don't want it to eject if the button is inadvertently pressed.
-t With this option the drive is given a CD-ROM tray close command.
Not all devices support this command.
-T With this option the drive is given a CD-ROM tray close command if
it's opened, and a CD-ROM tray eject command if it's closed. Not
all devices support this command, because it uses the above CD-ROM
tray close command.
With this option the drive is given a CD-ROM select speed command.
The speed argument is a number indicating the desired speed (e.g.
8 for 8X speed), or 0 for maximum data rate. Not all devices
support this command and you can only specify speeds that the
drive is capable of. Every time the media is changed this option
is cleared. This option can be used alone, or with the -t and -c
-X With this option the CD-ROM drive will be probed to detect the
available speeds. The output is a list of speeds which can be used
as an argument of the -x option. This only works with Linux 2.6.13
or higher, on previous versions solely the maximum speed will be
reported. Also note that some drive may not correctly report the
speed and therefore this option does not work with them.
-n With this option the selected device is displayed but no action is
-r This option specifies that the drive should be ejected using a
CDROM eject command.
-s This option specifies that the drive should be ejected using SCSI
-f This option specifies that the drive should be ejected using a
removable floppy disk eject command.
-q This option specifies that the drive should be ejected using a
tape drive offline command.
-p This option allow you to use /proc/mounts instead /etc/mtab. It
also passes the -n option to umount(1).
-m This option allows eject to work with device drivers which
automatically mount removable media and therefore must be always
mount(1)ed. The option tells eject to not try to unmount the
given device, even if it is mounted according to /etc/mtab or
-V This option causes eject to display the program version and exit.
All options have corresponding long names, as listed below. The long
names can be abbreviated as long as they are unique.
Eject the default device:
Eject a device or mount point named cdrom:
Eject using device name:
Eject using mount point:
Eject 4th IDE device:
Eject first SCSI device:
Eject using SCSI partition name (e.g. a ZIP drive):
Select 5th disc on multi-disc changer:
eject -v -c4 /dev/cdrom
Turn on auto-eject on a SoundBlaster CD-ROM drive:
eject -a on /dev/sbpcd
Returns 0 if operation was successful, 1 if operation failed or command
syntax was not valid.
Eject only works with devices that support one or more of the four
methods of ejecting. This includes most CD-ROM drives (IDE, SCSI, and
proprietary), some SCSI tape drives, JAZ drives, ZIP drives (parallel
port, SCSI, and IDE versions), and LS120 removable floppies. Users have
also reported success with floppy drives on Sun SPARC and Apple
Macintosh systems. If eject does not work, it is most likely a
limitation of the kernel driver for the device and not the eject
The -r, -s, -f, and -q options allow controlling which methods are used
to eject. More than one method can be specified. If none of these
options are specified, it tries all four (this works fine in most
Eject may not always be able to determine if the device is mounted
(e.g. if it has several names). If the device name is a symbolic link,
eject will follow the link and use the device that it points to.
If eject determines that the device can have multiple partitions, it
will attempt to unmount all mounted partitions of the device before
ejecting. If an unmount fails, the program will not attempt to eject
You can eject an audio CD. Some CD-ROM drives will refuse to open the
tray if the drive is empty. Some devices do not support the tray close
If the auto-eject feature is enabled, then the drive will always be
ejected after running this command. Not all Linux kernel CD-ROM drivers
support the auto-eject mode. There is no way to find out the state of
the auto-eject mode.
You need appropriate privileges to access the device files. Running as
root or setuid root is required to eject some devices (e.g. SCSI
The heuristic used to find a device, given a name, is as follows. If
the name ends in a trailing slash, it is removed (this is to support
filenames generated using shell file name completion). If the name
starts with '.' or '/', it tries to open it as a device file or mount
point. If that fails, it tries prepending '/dev/', '/media/' ,'/mnt/',
'/dev/cdroms', '/dev/rdsk/', '/dev/dsk/', and finally './' to the name,
until a device file or mount point is found that can be opened. The
program checks /etc/mtab for mounted devices. If that fails, it also
checks /etc/fstab for mount points of currently unmounted devices.
Creating symbolic links such as /dev/cdrom or /dev/zip is recommended
so that eject can determine the appropriate devices using easily
To save typing you can create a shell alias for the eject options that
work for your particular setup.
Eject was written by Jeff Tranter (email@example.com) and is released
under the conditions of the GNU General Public License. See the file
COPYING and notes in the source code for details.
The -x option was added by Nobuyuki Tsuchimura
(firstname.lastname@example.org), with thanks to Roland Krivanek
(email@example.com) and his cdrom_speed command.
The -T option was added by Sybren Stuvel (firstname.lastname@example.org), with
big thanks to Benjamin Schwenk (email@example.com).
The -X option was added by Eric Piel (Eric.Piel@tremplin-utc.net).
mount(2), umount(2), mount(8), umount(8)