Provided by: gpsd-clients_2.95-13.1_i386
gpspipe - tool to connect to gpsd and retrieve sentences
gpspipe [-h] [-d] [-l] [-o filename] [-n count] [-r] [-R]
[-s serial-device] [-t] [-T timestamp-format] [-w] [-v]
[-D debug-level] [server [:port [:device]]]
gpspipe is a tool to connect to gpsd and output the received sentences
to stdout. This makes the program useful as a pipe from gpsd to another
program or file.
gpspipe does not require root privileges, and can be run concurrently
with other tools connecting to the local gpsd without causing problems.
The output will consist of one or both of the raw NMEA or native gpsd
sentences. Each line can be optionally time stamped. There is also an
option to exit gracefully after a given count of packets.
Optionally a server, TCP/IP port number and remote device can be given.
If omitted, gpspipe connects to localhost on the default port (2947)
and watches all devices opened by gpsd.
gpspipe may be run as a daemon, but requires the -o flag for writing
the output to a file.
-h makes gpspipe print a usage message and exit.
-d causes gpspipe to run as a daemon.
-l causes gpspipe to sleep for ten seconds before attempting to connect
to gpsd. This is very useful when running as a daemon, giving gpsd time
to start before attempting a connection.
-r causes raw NMEA sentences to be output.
-R causes super-raw (gps binary) data to be output. This overrides NMEA
and gpsd output modes.
-s option causes the collected data to be written to the specified
serial device with settings 4800 8N1. Thus gpspipe can be used with -s
and -r options to emulate a serial port hardwired to a GPS that gpsd is
-o option causes the collected data to be written to the specified
file. Use of this option is mandatory if gpspipe is run as a daemon.
-w causes native gpsdsentences to be output.
-t adds a timestamp to each sentence output.
-T sets the format of the timestamp. See strftime(3) for the available
placeholders. Setting this option implies -t.
-n [count] causes [count] sentences to be output. gpspipe will then
-v causes gpspipe to show a spinning activity indicator on stderr. This
is useful if stdout is redirected into a file or a pipe. By default the
spinner is advanced with every messages written; specifying -v more
than once will double the number of messages required to rotate the
-V prints the version, then exits.
At least one of -R, -r or -w must be specified.
When gpsd is running gpspipe -r -n 100 will send one hundred raw NMEA
sentences to standard output, then exit.
gpsd(8), gps(1), libgps(3), libgpsd(3), gpsprof(1), gpsfake(1),
gpsctl(1), gpscat(1). gpsmon(1).
Gary E. Miller email@example.com. There is a project page for gpsd