Provided by: nbd-server_2.9.23-3ubuntu1_i386 bug

NAME

       nbd-server  -  serve  a  file  as  a  block  device  to other computers
       running the GNU/Linux(tm) or GNU/Hurd Operating    System

SYNOPSIS

       nbd-server  [ip@]port filename [ size ] [ -r ] [ -m ] [ -c ] [ -l  host
       list  filename  ]  [  -o  section  name  ]  [ -C config file ] [ -M max
       connections ] [ -d ]

DESCRIPTION

       nbd-server is the server for the Linux Network Block Device (NBD). With
       NBD,  a client can use a file, exported over the network from a server,
       as a block device. It can then be used for whatever  purpose  a  normal
       block device (harddisk, CD-ROM, ...) can be used for.

       NBD can be useful for diskless clients that need swapspace, but you can
       also create a filesystem on it and use it as though  it  were  a  local
       filesystem.

       nbd-server  implements  some  security through a file called "/etc/nbd-
       server/allow" (by default; a different file can be chosen with the '-l'
       option or through a config file specification). This file must list the
       IP-addresses or network masks of clients that are allowed  to  connect.
       If  it  does not exist, all clients are able to connect. If the file is
       empty, no clients can connect.

       Note that while the command line allows for specifying an  export,  the
       use  of  this  option  is  deprecated. It is preferred to make use of a
       configuration file instead, the format of  which  is  defined  in  nbd-
       server(5).

OPTIONS

       ip     The  ip address the server should listen on. This may be an IPv4
              address, an IPv6 address, or a hostname.  In  the  latter  case,
              nbd-server will do a hostname lookup for the name specified, and
              will  listen  on  the  first  address  that  is  returned.   For
              compatibility  with  past  versions  of  nbd-server,  if an IPv4
              address is specified,  the  @  sign  that  serves  as  separator
              between the address and port may be replaced by a colon.

              If  this  parameter  is not specified, nbd-server will listen on
              all local addresses on both IPv4 and IPv6.  To  limit  to  IPv4,
              specify  the address as 0.0.0.0; to limit to IPv6, specify it as
              ::.

       port   The port the server should listen to. A valid port is any number
              between  1  and  65536;  if 0 is used, nbd-server will listen on
              stdin (so that nbd-server can be ran from inetd)

       filename
              The filename of the file that should be exported.  This  can  be
              any file, including "real" blockdevices (i.e. a file from /dev).
              If the filename includes the literal string "%s", then  this  %s
              will  be substituded with the IP-address of the client trying to
              connect.

       size   The size of the  block  device  at  the  client  side.  This  is
              especially useful in conjunction with the -m option

              Can  optionally  be followed by one of K,k,M or m, in which case
              the size will be multiplied by 1024 (K or k) or 1048576 (M or m)

       -r     Export the file read-only. If a client tries to write to a read-
              only exported file, it will receive an error, but the connection
              will stay up.

       -m     Work  with  multiple  files.  This  can  be   used   to   export
              blockdevices  that  are larger than the maximum allowed filesize
              on a given filesystem; i.e. when the filesystem does  not  allow
              files  larger  than 2GB (which is true for Linux 2.2 and below),
              you can use this option to store the data in multiple files  and
              export a larger filesystem, if needed.

              To use this option, you must create a number of files with names
              in the format "name.X", where "name" is given  as  the  filename
              argument  to  nbd-server,  and "X" is a number starting by 0 and
              going up for each file.

              Allowing more flexibility for this option is planned for  future
              versions.

       -c     Copy  on  write.  When this option is provided, write-operations
              are not done to the exported file, but to a separate file.  This
              separate  file  is  removed when the connection is closed, which
              means that serving this  way  will  make  nbd-server  slow  down
              (especially  on  large  block  devices with lots of writes), and
              that after disconnecting and  reconnecting  the  client  or  the
              server, all changes are lost.

       -C     Specify  configuration  file. The default configuration file, if
              this parameter is not specified, is /etc/nbd-server/config.

              Note that the  configuration  file  is  always  parsed  and  the
              entries  in  the file used, even if an extra server is specified
              on the command line. To disable the configuration file entirely,
              either  move it away or use the -C option to point nbd-server(1)
              to a non-existing or empty configuration file.

              Also note that if an empty, incomplete, or invalid configuration
              file  is  specified,  nbd-server  will  produce  a warning about
              failure to parse the config file. If the command line contains a
              fully  specified configuration, this warning is harmless and may
              be ignored.

       -M     Specify the  maximum  number  of  opened  connections.  If  this
              parameter is not specified, no limit is set.

       -d     Do not fork. Useful for debugging.

       host list filename
              This  argument  should  contain a list of IP-addresses for hosts
              that may connect to the server. Wildcards are  not  allowed.  If
              the  file  does  not  exist,  it  is  ignored  (and any host can
              connect); If the file does exist, but  is  empty,  no  host  can
              connect.  By  default,  the name 'nbd_server.allow' is used, and
              looked for  in  the  current  directory,  unless  nbd-server  is
              compiled  as  a  daemon,  in  which case it is looked for in the
              root-directory.

       section name
              If the -o argument is given on the command line, then nbd-server
              will output a configuration file section with this as the header
              that is functionally equivalent to the other  options  specified
              on  the  command  line,  and  exit. This is useful for migrating
              pre-2.9 nbd-server initscript configuration  files  to  the  new
              format.

EXAMPLES

       Some examples of nbd-server usage:

       o To export a file /export/nbd/exp-bl-dev on port 2000:

         nbd-server 2000 /export/nbd/exp-bl-dev

       o To export a the same file read-only:

         nbd-server 2000 /export/nbd/exp-bl-dev -r

       o To  export  the  same file read-write, but make sure changes are lost
         after restarting the client or the server:

         nbd-server 2000 /export/nbd/exp-bl-dev -c

SEE ALSO

       nbd-client (8), nbd-server (5), nbd-trdump (8)

AUTHOR

       The NBD kernel module and the NBD  tools  were  originally  written  by
       Pavel Machek (pavel@ucw.cz)

       The   Linux   kernel   module   is  now  maintained  by  Paul  Clements
       (Paul.Clements@steeleye.com), while the userland tools  are  maintained
       by Wouter Verhelst (<wouter@debian.org>)

       On  The  Hurd  there  is  a regular translator available to perform the
       client side of the protocol, and the use of nbd-client is not required.
       Please see the relevant documentation for more information.

       This  manual  page was written by Wouter Verhelst (<wouter@debian.org>)
       for  the  Debian  GNU/Linux  system  (but  may  be  used  by   others).
       Permission  is  granted to copy, distribute and/or modify this document
       under the terms of the  GNU  General  Public  License,  version  2,  as
       published by the Free Software Foundation.

                                 22 July 2011                    NBD-SERVER(1)