Provided by: zsh_4.3.11-4ubuntu2.is.3ubuntu2_i386 bug

NAME

       zshbuiltins - zsh built-in commands

SHELL BUILTIN COMMANDS

       - simple command
              See the section `Precommand Modifiers'.

       . file [ arg ... ]
              Read  commands  from  file and execute them in the current shell
              environment.

              If file does not contain a slash, or if PATH_DIRS  is  set,  the
              shell  looks  in  the  components of $path to find the directory
              containing file.  Files in the current directory  are  not  read
              unless  `.'  appears  somewhere  in  $path.   If  a  file  named
              `file.zwc' is found, is newer than file,  and  is  the  compiled
              form  (created with the zcompile builtin) of file, then commands
              are read from that file instead of file.

              If any arguments arg  are  given,  they  become  the  positional
              parameters;  the old positional parameters are restored when the
              file is done executing.  If file was not found the return status
              is  127;  if  file  was  found  but contained a syntax error the
              return status is 126; else the return status is the exit  status
              of the last command executed.

       : [ arg ... ]
              This  command  does nothing, although normal argument expansions
              is performed which may have effects on shell parameters.  A zero
              exit status is returned.

       alias [ {+|-}gmrsL ] [ name[=value] ... ]
              For  each  name with a corresponding value, define an alias with
              that value.  A trailing space in value causes the next  word  to
              be  checked  for  alias  expansion.   If the -g flag is present,
              define a global alias; global aliases are expanded even if  they
              do not occur in command position.

              If  the  -s  flags  is  present,  define  a suffix alias: if the
              command word on a command line is in the form `text.name', where
              text  is any non-empty string, it is replaced by the text `value
              text.name'.  Note that name is treated as a literal string,  not
              a  pattern.   A  trailing  space in value is not special in this
              case.  For example,

                     alias -s ps=gv

              will cause the command `*.ps' to be expanded to `gv  *.ps'.   As
              alias expansion is carried out earlier than globbing, the `*.ps'
              will then be expanded.  Suffix aliases  constitute  a  different
              name  space  from  other  aliases (so in the above example it is
              still possible to create an alias for the command  ps)  and  the
              two sets are never listed together.

              For  each  name  with no value, print the value of name, if any.
              With no arguments, print all  currently  defined  aliases  other
              than  suffix aliases.  If the -m flag is given the arguments are
              taken as patterns (they should be quoted to preserve  them  from
              being  interpreted  as  glob patterns), and the aliases matching
              these patterns are printed.  When printing aliases  and  one  of
              the  -g,  -r  or  -s  flags is present, restrict the printing to
              global, regular or suffix aliases, respectively; a regular alias
              is one which is neither a global nor a suffix alias.   Using `+'
              instead of `-', or ending the option list  with  a  single  `+',
              prevents the values of the aliases from being printed.

              If  the  -L  flag  is present, then print each alias in a manner
              suitable for putting in a startup script.  The  exit  status  is
              nonzero  if  a  name (with no value) is given for which no alias
              has been defined.

              For more on aliases, include common problems,  see  the  section
              ALIASING in zshmisc(1).

       autoload [ {+|-}UXktz ] [ -w ] [ name ... ]
              Equivalent to functions -u, with the exception of -X/+X and -w.

              The  flag  -X  may be used only inside a shell function, and may
              not be followed by a name.  It causes the calling function to be
              marked for autoloading and then immediately loaded and executed,
              with the current array of positional  parameters  as  arguments.
              This  replaces  the  previous definition of the function.  If no
              function definition is  found,  an  error  is  printed  and  the
              function remains undefined and marked for autoloading.

              The  flag  +X  attempts  to  load  each  name  as  an autoloaded
              function, but does not execute it.   The  exit  status  is  zero
              (success)  if  the  function  was  not  previously defined and a
              definition for it was found.  This does not replace any existing
              definition   of  the  function.   The  exit  status  is  nonzero
              (failure) if  the  function  was  already  defined  or  when  no
              definition  was  found.  In the latter case the function remains
              undefined and marked for autoloading.  If ksh-style  autoloading
              is  enabled,  the  function created will contain the contents of
              the file plus a call to the function itself appended to it, thus
              giving normal ksh autoloading behaviour on the first call to the
              function.

              With the -w flag, the names are taken as names of files compiled
              with the zcompile builtin, and all functions defined in them are
              marked for autoloading.

              The flags -z and -k mark the function to be autoloaded in native
              or  ksh  emulation,  as if the option KSH_AUTOLOAD were unset or
              were set, respectively.  The flags override the setting  of  the
              option at the time the function is loaded.

       bg [ job ... ]
       job ... &
              Put  each specified job in the background, or the current job if
              none is specified.

       bindkey
              See the section `Zle Builtins' in zshzle(1).

       break [ n ]
              Exit from an enclosing for, while, until, select or repeat loop.
              If n is specified, then break n levels instead of just one.

       builtin name [ args ... ]
              Executes the builtin name, with the given args.

       bye    Same as exit.

       cap    See the section `The zsh/cap Module' in zshmodules(1).

       cd [ -qsLP ] [ arg ]
       cd [ -qsLP ] old new
       cd [ -qsLP ] {+|-}n
              Change  the  current  directory.   In the first form, change the
              current directory to arg, or to the value of $HOME if arg is not
              specified.  If arg is `-', change to the previous directory.

              Otherwise,  if arg begins with a slash, attempt to change to the
              directory given by arg.

              If arg does not begin with a slash,  the  behaviour  depends  on
              whether  the  current  directory  `.'  occurs  in  the  list  of
              directories contained in the shell parameter cdpath.  If it does
              not,  first  attempt  to  change  to the directory arg under the
              current directory, and if that  fails  but  cdpath  is  set  and
              contains at least one element attempt to change to the directory
              arg under each component of cdpath in turn until successful.  If
              `.'  occurs in cdpath, then cdpath is searched strictly in order
              so that `.' is only tried at the appropriate point.

              The order of testing cdpath is modified if the  option  POSIX_CD
              is set, as described in the documentation for the option.

              If  no  directory is found, the option CDABLE_VARS is set, and a
              parameter named arg exists whose  value  begins  with  a  slash,
              treat  its  value as the directory.  In that case, the parameter
              is added to the named directory hash table.

              The second form of cd substitutes the string new for the  string
              old in the name of the current directory, and tries to change to
              this new directory.

              The third form of cd extracts an entry from the directory stack,
              and  changes  to  that  directory.  An argument of the form `+n'
              identifies a stack entry by counting from the left of  the  list
              shown  by  the dirs command, starting with zero.  An argument of
              the form `-n' counts from the right.  If the PUSHD_MINUS  option
              is set, the meanings of `+' and `-' in this context are swapped.

              If  the  -q (quiet) option is specified, the hook function chpwd
              and the functions in the array chpwd_functions are  not  called.
              This  is  useful  for  calls  to  cd  that  do  not  change  the
              environment seen by an interactive user.

              If the -s option is specified, cd refuses to change the  current
              directory  if  the  given pathname contains symlinks.  If the -P
              option is given or the CHASE_LINKS option is set, symbolic links
              are  resolved  to  their true values.  If the -L option is given
              symbolic links are retained in the directory (and not  resolved)
              regardless of the state of the CHASE_LINKS option.

       chdir  Same as cd.

       clone  See the section `The zsh/clone Module' in zshmodules(1).

       command [ -pvV ] simple command
              The  simple  command  argument  is  taken as an external command
              instead of a  function  or  builtin  and  is  executed.  If  the
              POSIX_BUILTINS option is set, builtins will also be executed but
              certain special properties of them are suppressed. The  -p  flag
              causes  a  default path to be searched instead of that in $path.
              With the -v flag, command is similar to whence and with  -V,  it
              is equivalent to whence -v.

              See also the section `Precommand Modifiers'.

       comparguments
              See the section `The zsh/computil Module' in zshmodules(1).

       compcall
              See the section `The zsh/compctl Module' in zshmodules(1).

       compctl
              See the section `The zsh/compctl Module' in zshmodules(1).

       compdescribe
              See the section `The zsh/computil Module' in zshmodules(1).

       compfiles
              See the section `The zsh/computil Module' in zshmodules(1).

       compgroups
              See the section `The zsh/computil Module' in zshmodules(1).

       compquote
              See the section `The zsh/computil Module' in zshmodules(1).

       comptags
              See the section `The zsh/computil Module' in zshmodules(1).

       comptry
              See the section `The zsh/computil Module' in zshmodules(1).

       compvalues
              See the section `The zsh/computil Module' in zshmodules(1).

       continue [ n ]
              Resume  the  next  iteration of the enclosing for, while, until,
              select or repeat loop.  If n is  specified,  break  out  of  n-1
              loops and resume at the nth enclosing loop.

       declare
              Same as typeset.

       dirs [ -c ] [ arg ... ]
       dirs [ -lpv ]
              With  no  arguments,  print the contents of the directory stack.
              Directories are added to this stack with the pushd command,  and
              removed  with  the  cd  or  popd  commands.   If  arguments  are
              specified,  load  them  onto  the  directory  stack,   replacing
              anything that was there, and push the current directory onto the
              stack.

              -c     clear the directory stack.

              -l     print directory names in full instead of using of using ~
                     expressions.

              -p     print directory entries one per line.

              -v     number the directories in the stack when printing.

       disable [ -afmrs ] name ...
              Temporarily  disable the named hash table elements.  The default
              is to disable builtin commands.   This  allows  you  to  use  an
              external  command  with the same name as a builtin command.  The
              -a option causes disable to act on regular  or  global  aliases.
              The  -s  option causes disable to act on suffix aliases.  The -f
              option causes disable to act on shell functions.  The -r options
              causes  disable to act on reserved words.  Without arguments all
              disabled hash table elements from the corresponding  hash  table
              are  printed.   With  the  -m  flag  the  arguments are taken as
              patterns (which should be quoted to prevent them from undergoing
              filename  expansion),  and  all  hash  table  elements  from the
              corresponding hash table matching these patterns  are  disabled.
              Disabled objects can be enabled with the enable command.

       disown [ job ... ]
       job ... &|
       job ... &!
              Remove  the specified jobs from the job table; the shell will no
              longer report their status, and will not complain if you try  to
              exit  an  interactive shell with them running or stopped.  If no
              job is specified, disown the current job.

              If the jobs are currently stopped and the  AUTO_CONTINUE  option
              is  not  set,  a warning is printed containing information about
              how to make them running after they have been disowned.  If  one
              of  the latter two forms is used, the jobs will automatically be
              made running, independent of the setting  of  the  AUTO_CONTINUE
              option.

       echo [ -neE ] [ arg ... ]
              Write  each  arg on the standard output, with a space separating
              each one.  If the -n flag is not present, print a newline at the
              end.  echo recognizes the following escape sequences:

              \a     bell character
              \b     backspace
              \c     suppress final newline
              \e     escape
              \f     form feed
              \n     linefeed (newline)
              \r     carriage return
              \t     horizontal tab
              \v     vertical tab
              \\     backslash
              \0NNN  character code in octal
              \xNN   character code in hexadecimal
              \uNNNN unicode character code in hexadecimal
              \UNNNNNNNN
                     unicode character code in hexadecimal

              The  -E  flag,  or  the  BSD_ECHO option, can be used to disable
              these escape sequences.  In the latter case, -e flag can be used
              to enable them.

       echotc See the section `The zsh/termcap Module' in zshmodules(1).

       echoti See the section `The zsh/terminfo Module' in zshmodules(1).

       emulate [ -LR ] [ {zsh|sh|ksh|csh} [ -c arg ] ]
              Without any argument print current emulation mode.

              With single argument set up zsh options to emulate the specified
              shell as much as possible.  csh will never  be  fully  emulated.
              If  the argument is not one of the shells listed above, zsh will
              be used as a default; more precisely, the tests performed on the
              argument  are  the same as those used to determine the emulation
              at  startup  based  on  the  shell   name,   see   the   section
              `Compatibility' in zshmisc(1) .

              If  the  -R  option  is  given,  all  options are reset to their
              default value corresponding to  the  specified  emulation  mode,
              except   for   certain   options   describing   the  interactive
              environment; otherwise,  only  those  options  likely  to  cause
              portability  problems  in scripts and functions are altered.  If
              the  -L  option  is  given,  the   options   LOCAL_OPTIONS   and
              LOCAL_TRAPS  will  be  set  as  well, causing the effects of the
              emulate command and any setopt and trap commands to be local  to
              the  immediately  surrounding  shell  function, if any; normally
              these options are turned off in all emulation modes except  ksh.
              The -L and -c are mutually exclusive.

              If  -c  arg is given, evaluate arg while the requested emulation
              is temporarily in effect.  The emulation and all options will be
              restored  to  their original values before emulate returns.  The
              -R flag may be used.

              Use of -c enables `sticky' emulation mode for functions  defined
              within   the   evaluated  expression:   the  emulation  mode  is
              associated thereafter with the function  so  that  whenever  the
              function  is  executed the emulation (respecting the -R flag, if
              present) and all options are set before entry to  the  function,
              and  restored  after  exit.   If the function is called when the
              sticky emulation is already in effect, either within an `emulate
              shell  -c'  expression  or within another function with the same
              sticky emulation, entry and exit from the function do not  cause
              options to be altered (except due to standard processing such as
              the LOCAL_OPTIONS option).

              For example:

                     emulate sh -c 'fni() { setopt cshnullglob; }
                     fno() { fni; }'
                     fno

              The two functions  fni  and  fno  are  defined  with  sticky  sh
              emulation.   fno  is  then  executed, causing options associated
              with emulations to be set to their values in sh.  fni then calls
              fno;  because  fno  is  also  marked for sticky sh emulation, no
              option changes take place on entry to or exit  from  it.   Hence
              the  option  cshnullglob,  turned  off  by sh emulation, will be
              turned on within fni and remain on on return to  fno.   On  exit
              from fno, the emulation mode and all options will be restored to
              the state they were in before entry to the temporary emulation.

              The documentation above is typically sufficient for the intended
              purpose  of  executing  code  designed  for  other  shells  in a
              suitable environment.  More detailed rules follow.
              1.     The sticky emulation  environment  provided  by  `emulate
                     shell  -c'  is  identical  to that provided by entry to a
                     function marked for sticky emulation as a consequence  of
                     being   defined  in  such  an  environment.   Hence,  for
                     example,   the   sticky   emulation   is   inherited   by
                     subfunctions   defined   within   functions  with  sticky
                     emulation.
              2.     No change of options takes place on entry to or exit from
                     functions that are not marked for sticky emulation, other
                     than those that would normally take place, even if  those
                     functions are called within sticky emulation.
              3.     No  special handling is provided for functions marked for
                     autoload nor for functions present in wordcode created by
                     the zcompile command.
              4.     The  presence  or  absence  of  the  -R  flag  to emulate
                     corresponds to different sticky emulation modes,  so  for
                     example  `emulate sh -c', `emulate -R sh -c' and `emulate
                     csh -c' are treated as three distinct sticky emulations.

       enable [ -afmrs ] name ...
              Enable  the  named  hash  table  elements,  presumably  disabled
              earlier   with  disable.   The  default  is  to  enable  builtin
              commands.  The -a option causes enable  to  act  on  regular  or
              global  aliases.   The  -s option causes enable to act on suffix
              aliases.  The -f option causes enable to act on shell functions.
              The  -r  option causes enable to act on reserved words.  Without
              arguments all enabled hash table elements from the corresponding
              hash  table  are  printed.   With  the -m flag the arguments are
              taken as patterns (should be quoted) and all hash table elements
              from  the  corresponding  hash table matching these patterns are
              enabled.  Enabled objects  can  be  disabled  with  the  disable
              builtin command.

       eval [ arg ... ]
              Read  the  arguments  as  input  to  the  shell  and execute the
              resulting command(s) in the current shell process.   The  return
              status is the same as if the commands had been executed directly
              by the shell; if there are no args or they contain  no  commands
              (i.e.  are  an  empty string or whitespace) the return status is
              zero.

       exec [ -cl ] [ -a argv0 ] simple command
              Replace the current shell with an external command  rather  than
              forking.   With  -c  clear the environment; with -l prepend - to
              the argv[0] string of the command executed (to simulate a  login
              shell);  with  -a  argv0  set  the argv[0] string of the command
              executed.  See the section `Precommand Modifiers'.

       exit [ n ]
              Exit the shell with the exit status specified by n; if  none  is
              specified,  use  the exit status from the last command executed.
              An EOF condition will also cause the shell to exit,  unless  the
              IGNORE_EOF option is set.

       export [ name[=value] ... ]
              The  specified  names  are  marked  for  automatic export to the
              environment of subsequently executed  commands.   Equivalent  to
              typeset  -gx.   If a parameter specified does not already exist,
              it is created in the global scope.

       false [ arg ... ]
              Do nothing and return an exit status of 1.

       fc [ -e ename ] [ -m match ] [ old=new ... ] [ first [ last ] ]
       fc -l [ -nrdfEiD ] [ -t timefmt ] [ -m match ]
             [ old=new ... ] [ first [ last ] ]
       fc -p [ -a ] [ filename [ histsize [ savehistsize ] ] ]
       fc -P
       fc -ARWI [ filename ]
              Select a range of commands from first to last from  the  history
              list.  The arguments first and last may be specified as a number
              or as a string.  A negative number is used as an offset  to  the
              current  history  event  number.   A  string  specifies the most
              recent event beginning with the given string.  All substitutions
              old=new, if any, are then performed on the commands.

              If  the  -l  flag is given, the resulting commands are listed on
              standard output.  If  the  -m  flag  is  also  given  the  first
              argument  is  taken as a pattern (should be quoted) and only the
              history events matching this pattern will be  shown.   Otherwise
              the  editor  program ename is invoked on a file containing these
              history events.  If  ename  is  not  given,  the  value  of  the
              parameter  FCEDIT  is  used; if that is not set the value of the
              parameter EDITOR is used; if that is not set a builtin  default,
              usually  `vi'  is  used.  If ename is `-', no editor is invoked.
              When editing is complete, the edited command is executed.

              If first is not specified, it will be set to -1 (the most recent
              event),  or  to  -16  if  the  -l flag is given.  If last is not
              specified, it will be set to first, or to -1 if the -l  flag  is
              given.

              The  flag  -r reverses the order of the commands and the flag -n
              suppresses command numbers when listing.

              Also when listing,
              -d     prints timestamps for each command
              -f     prints full time-date stamps in the US  `MM/DD/YY  hh:mm'
                     format
              -E     prints  full time-date stamps in the European `dd.mm.yyyy
                     hh:mm' format
              -i     prints  full  time-date  stamps  in  ISO8601  `yyyy-mm-dd
                     hh:mm' format
              -t fmt prints  time  and date stamps in the given format; fmt is
                     formatted  with  the  strftime  function  with  the   zsh
                     extensions  described for the %D{string} prompt format in
                     the section EXPANSION OF PROMPT SEQUENCES in  zshmisc(1).
                     The  resulting  formatted string must be no more than 256
                     characters or will not be printed.
              -D     prints elapsed times; may be combined  with  one  of  the
                     options above.

              `fc  -p'  pushes  the  current  history  list  onto  a stack and
              switches to a new history  list.   If  the  -a  option  is  also
              specified,  this  history list will be automatically popped when
              the current function scope is exited, which  is  a  much  better
              solution than creating a trap function to call `fc -P' manually.
              If no arguments are specified, the history list is  left  empty,
              $HISTFILE  is  unset, and $HISTSIZE & $SAVEHIST are set to their
              default values.  If one argument is given, $HISTFILE is  set  to
              that filename, $HISTSIZE & $SAVEHIST are left unchanged, and the
              history file is read in (if it exists)  to  initialize  the  new
              list.   If a second argument is specified, $HISTSIZE & $SAVEHIST
              are instead set to the single specified numeric value.  Finally,
              if a third argument is specified, $SAVEHIST is set to a separate
              value from $HISTSIZE.  You are free to change these  environment
              values  for  the new history list however you desire in order to
              manipulate the new history list.

              `fc -P' pops the history list back to an older list saved by `fc
              -p'.   The  current  list is saved to its $HISTFILE before it is
              destroyed  (assuming  that  $HISTFILE  and  $SAVEHIST  are   set
              appropriately,  of course).  The values of $HISTFILE, $HISTSIZE,
              and $SAVEHIST are restored to the values they had when  `fc  -p'
              was called.  Note that this restoration can conflict with making
              these variables "local", so your best  bet  is  to  avoid  local
              declarations  for these variables in functions that use `fc -p'.
              The one other guaranteed-safe  combination  is  declaring  these
              variables  to be local at the top of your function and using the
              automatic option (-a) with `fc -p'.  Finally, note  that  it  is
              legal to manually pop a push marked for automatic popping if you
              need to do so before the function exits.

              `fc -R' reads the history from the given file,  `fc  -W'  writes
              the  history  out  to  the  given  file, and `fc -A' appends the
              history out to the given file.  If no filename is specified, the
              $HISTFILE  is  assumed.   If  the -I option is added to -R, only
              those events that are not already contained within the  internal
              history  list are added.  If the -I option is added to -A or -W,
              only  those  events  that  are  new   since   last   incremental
              append/write  to  the history file are appended/written.  In any
              case, the created file will have no more than $SAVEHIST entries.

       fg [ job ... ]
       job ...
              Bring each specified job in turn to the foreground.  If  no  job
              is specified, resume the current job.

       float [ {+|-}EFHghlprtux ] [ -LRZ [ n ]] [ name[=value] ... ]
              Equivalent  to  typeset  -E,  except  that options irrelevant to
              floating point numbers are not permitted.

       functions [ {+|-}UXkmtuz ] [ name ... ]
       functions -M mathfn [ min [ max [ shellfn ] ] ]
       functions -M [ -m pattern ... ]
       functions +M [ -m ] mathfn
              Equivalent to typeset -f, with the exception of the  -M  option.
              Use of the -M option may not be combined with any of the options
              handled by typeset -f.

              functions -M mathfn defines mathfn as the name of a mathematical
              function  recognised  in  all forms of arithmetical expressions;
              see the  section  `Arithmetic  Evaluation'  in  zshmisc(1).   By
              default mathfn may take any number of comma-separated arguments.
              If min is given, it must have exactly min args; if min  and  max
              are  both  given,  it must have at least min and and at most max
              args.  max may be -1 to indicate that there is no upper limit.

              By default the function is implemented by a  shell  function  of
              the  same name; if shellfn is specified it gives the name of the
              corresponding shell function while mathfn remains the name  used
              in  arithmetical expressions.  The name of the function in $0 is
              mathfn (not shellfn as would usually be the case), provided  the
              option FUNCTION_ARGZERO is in effect.  The positional parameters
              in the  shell  function  correspond  to  the  arguments  of  the
              mathematical function call.  The result of the last arithmetical
              expression evaluated inside the shell function (even if it is  a
              form  that  normally  only returns a status) gives the result of
              the mathematical function.

              functions -M with  no  arguments  lists  all  such  user-defined
              functions in the same form as a definition.  With the additional
              option -m and a list of arguments, all  functions  whose  mathfn
              matches one of the pattern arguments are listed.

              function +M removes the list of mathematical functions; with the
              additional option -m the arguments are treated as  patterns  and
              all  functions  whose  mathfn  matches  the pattern are removed.
              Note that the shell function implementing the behaviour  is  not
              removed (regardless of whether its name coincides with mathfn).

              For example, the following prints the cube of 3:

                     zmath_cube() { (( $1 * $1 * $1 )) }
                     functions -M cube 1 1 zmath_cube
                     print $(( cube(3) ))

       getcap See the section `The zsh/cap Module' in zshmodules(1).

       getln [ -AclneE ] name ...
              Read the top value from the buffer stack and put it in the shell
              parameter name.  Equivalent to read -zr.

       getopts optstring name [ arg ... ]
              Checks the args for legal options.  If the args are omitted, use
              the  positional parameters.  A valid option argument begins with
              a `+' or a `-'.  An argument not beginning with a `+' or a  `-',
              or  the argument `--', ends the options.  Note that a single `-'
              is not considered a valid option argument.   optstring  contains
              the letters that getopts recognizes.  If a letter is followed by
              a `:', that option requires an argument.   The  options  can  be
              separated from the argument by blanks.

              Each  time  it  is  invoked, getopts places the option letter it
              finds in the shell parameter name, prepended with a `+' when arg
              begins  with  a  `+'.   The  index  of the next arg is stored in
              OPTIND.  The option argument, if any, is stored in OPTARG.

              The first option to be examined may  be  changed  by  explicitly
              assigning  to  OPTIND.  OPTIND has an initial value of 1, and is
              normally reset to 1 upon exit from a shell function.  OPTARG  is
              not  reset  and  retains  its value from the most recent call to
              getopts.  If either of OPTIND or OPTARG is explicitly unset,  it
              remains  unset,  and the index or option argument is not stored.
              The option itself is still stored in name in this case.

              A leading `:' in optstring causes getopts to store the letter of
              any  invalid  option  in  OPTARG,  and to set name to `?' for an
              unknown option and to `:' when a required argument  is  missing.
              Otherwise,  getopts sets name to `?' and prints an error message
              when an option is invalid.  The  exit  status  is  nonzero  when
              there are no more options.

       hash [ -Ldfmrv ] [ name[=value] ] ...
              hash  can be used to directly modify the contents of the command
              hash table, and the named directory hash  table.   Normally  one
              would  modify  these  tables  by  modifying  one's PATH (for the
              command hash table) or by creating appropriate shell  parameters
              (for  the named directory hash table).  The choice of hash table
              to work on is determined by the -d option;  without  the  option
              the  command  hash  table is used, and with the option the named
              directory hash table is used.

              Given no arguments, and  neither  the  -r  or  -f  options,  the
              selected hash table will be listed in full.

              The  -r option causes the selected hash table to be emptied.  It
              will be subsequently rebuilt in  the  normal  fashion.   The  -f
              option  causes  the  selected  hash  table  to  be fully rebuilt
              immediately.  For the command hash table  this  hashes  all  the
              absolute  directories  in  the PATH, and for the named directory
              hash table this adds all users'  home  directories.   These  two
              options cannot be used with any arguments.

              The  -m  option  causes  the  arguments  to be taken as patterns
              (which should be quoted) and the  elements  of  the  hash  table
              matching  those  patterns  are printed.  This is the only way to
              display a limited selection of hash table elements.

              For each name with a corresponding  value,  put  `name'  in  the
              selected  hash  table, associating it with the pathname `value'.
              In the command hash table, this means that  whenever  `name'  is
              used  as  a  command argument, the shell will try to execute the
              file given by `value'.  In the named directory hash table,  this
              means that `value' may be referred to as `~name'.

              For  each  name with no corresponding value, attempt to add name
              to the hash table, checking what the appropriate value is in the
              normal  manner  for  that  hash  table.  If an appropriate value
              can't be found, then the hash table will be unchanged.

              The -v option causes hash table entries to be listed as they are
              added  by explicit specification.  If has no effect if used with
              -f.

              If the -L flag is present, then each hash table entry is printed
              in the form of a call to hash.

       history
              Same as fc -l.

       integer [ {+|-}Hghilprtux ] [ -LRZ [ n ]] [ name[=value] ... ]
              Equivalent  to  typeset  -i,  except  that options irrelevant to
              integers are not permitted.

       jobs [ -dlprs ] [ job ... ]
       jobs -Z string
              Lists information about each given job, or all jobs  if  job  is
              omitted.   The  -l flag lists process IDs, and the -p flag lists
              process groups.  If the -r flag is specified only  running  jobs
              will be listed and if the -s flag is given only stopped jobs are
              shown.  If the -d flag is given, the directory  from  which  the
              job  was  started (which may not be the current directory of the
              job) will also be shown.

              The -Z option replaces  the  shell's  argument  and  environment
              space  with  the  given  string,  truncated if necessary to fit.
              This will normally be visible  in  ps  (ps(1))  listings.   This
              feature is typically used by daemons, to indicate their state.

       kill [ -s signal_name | -n signal_number | -sig ] job ...
       kill -l [ sig ... ]
              Sends  either  SIGTERM or the specified signal to the given jobs
              or processes.  Signals are given by number or by names, with  or
              without  the  `SIG'  prefix.   If  the  signal being sent is not
              `KILL' or `CONT', then the job will be sent a `CONT'  signal  if
              it  is stopped.  The argument job can be the process ID of a job
              not in the job list.  In the second form, kill -l, if sig is not
              specified  the signal names are listed.  Otherwise, for each sig
              that is a name, the corresponding signal number is listed.   For
              each  sig  that  is a signal number or a number representing the
              exit status of a process which was terminated or  stopped  by  a
              signal the name of the signal is printed.

              On  some systems, alternative signal names are allowed for a few
              signals.  Typical examples are SIGCHLD and SIGCLD or SIGPOLL and
              SIGIO, assuming they correspond to the same signal number.  kill
              -l will only list the preferred form, however kill -l  alt  will
              show  if  the  alternative  form corresponds to a signal number.
              For example, under Linux kill -l IO and kill -l POLL both output
              29, hence kill -IO and kill -POLL have the same effect.

              Many  systems  will  allow  process IDs to be negative to kill a
              process group or zero to kill the current process group.

       let arg ...
              Evaluate each arg as an arithmetic expression.  See the  section
              `Arithmetic  Evaluation'  in  zshmisc(1)  for  a  description of
              arithmetic expressions.  The exit status is 0 if  the  value  of
              the  last  expression  is  nonzero, 1 if it is zero, and 2 if an
              error occurred.

       limit [ -hs ] [ resource [ limit ] ] ...
              Set or display resource limits.  Unless the -s  flag  is  given,
              the  limit  applies  only  the  children of the shell.  If -s is
              given without  other  arguments,  the  resource  limits  of  the
              current  shell  is  set to the previously set resource limits of
              the children.

              If limit is not specified, print the  current  limit  placed  on
              resource,  otherwise  set  the limit to the specified value.  If
              the -h flag is given, use hard limits instead  of  soft  limits.
              If no resource is given, print all limits.

              When  looping  over  multiple  resources,  the  shell will abort
              immediately if it detects a badly formed argument.  However,  if
              it  fails  to set a limit for some other reason it will continue
              trying to set the remaining limits.

              resource can be one of:

              addressspace
                     Maximum amount of address space used.
              aiomemorylocked
                     Maximum  amount  of  memory  locked  in   RAM   for   AIO
                     operations.
              aiooperations
                     Maximum number of AIO operations.
              cachedthreads
                     Maximum number of cached threads.
              coredumpsize
                     Maximum size of a core dump.
              cputime
                     Maximum CPU seconds per process.
              datasize
                     Maximum data size (including stack) for each process.
              descriptors
                     Maximum value for a file descriptor.
              filesize
                     Largest single file allowed.
              maxproc
                     Maximum number of processes.
              maxpthreads
                     Maximum number of threads per process.
              memorylocked
                     Maximum amount of memory locked in RAM.
              memoryuse
                     Maximum resident set size.
              msgqueue
                     Maximum number of bytes in POSIX message queues.
              resident
                     Maximum resident set size.
              sigpending
                     Maximum number of pending signals.
              sockbufsize
                     Maximum size of all socket buffers.
              stacksize
                     Maximum stack size for each process.
              vmemorysize
                     Maximum amount of virtual memory.

              Which  of  these  resource  limits  are available depends on the
              system.  resource can be abbreviated to any unambiguous  prefix.
              It  can  also  be  an  integer, which corresponds to the integer
              defined for the resource by the operating system.

              If argument corresponds to a number which is out of the range of
              the  resources  configured into the shell, the shell will try to
              read or write the limit anyway, and will report an error if this
              fails.   As  the shell does not store such resources internally,
              an attempt to set the limit will fail unless the  -s  option  is
              present.

              limit is a number, with an optional scaling factor, as follows:

              nh     hours
              nk     kilobytes (default)
              nm     megabytes or minutes
              [mm:]ss
                     minutes and seconds

              The  limit  command  is  not  made available by default when the
              shell starts in a mode emulating another shell.  It can be  made
              available with the command `zmodload -F zsh/rlimits b:limit'.

       local [ {+|-}AEFHUahlprtux ] [ -LRZi [ n ]] [ name[=value] ] ...
              Same  as  typeset,  except  that  the options -g, and -f are not
              permitted.  In this case the -x option does not force the use of
              -g, i.e. exported variables will be local to functions.

       log    List  all  users  currently  logged  in  who are affected by the
              current setting of the watch parameter.

       logout [ n ]
              Same as exit, except that it only works in a login shell.

       noglob simple command
              See the section `Precommand Modifiers'.

       popd [ [-q] {+|-}n ]
              Remove an entry from the directory stack, and perform  a  cd  to
              the  new top directory.  With no argument, the current top entry
              is removed.  An argument of the form  `+n'  identifies  a  stack
              entry  by  counting  from the left of the list shown by the dirs
              command, starting with zero.  An argument of the form -n  counts
              from  the right.  If the PUSHD_MINUS option is set, the meanings
              of `+' and `-' in this context are swapped.

              If the -q (quiet) option is specified, the hook  function  chpwd
              and  the functions in the array $chpwd_functions are not called,
              and the new directory stack is not printed.  This is useful  for
              calls  to  popd  that  do  not change the environment seen by an
              interactive user.

       print [ -abcDilmnNoOpPrsz ] [ -u n ] [ -f format ] [ -C cols ]
         [ -R [ -en ]] [ arg ... ]
              With the `-f' option the arguments are printed as  described  by
              printf.   With  no flags or with the flag `-', the arguments are
              printed on the standard output as described by  echo,  with  the
              following  differences:  the escape sequence `\M-x' metafies the
              character x (sets the highest bit), `\C-x'  produces  a  control
              character  (`\C-@'  and  `\C-?'  give  the  characters  NUL  and
              delete), and `\E' is a synonym for `\e'.  Finally, if not in  an
              escape  sequence, `\' escapes the following character and is not
              printed.

              -a     Print arguments with the column incrementing first.  Only
                     useful with the -c and -C options.

              -b     Recognize  all  the  escape  sequences  defined  for  the
                     bindkey command, see zshzle(1).

              -c     Print the arguments in columns.  Unless -a is also given,
                     arguments are printed with the row incrementing first.

              -C cols
                     Print  the  arguments in cols columns.  Unless -a is also
                     given, arguments are printed with  the  row  incrementing
                     first.

              -D     Treat   the   arguments  as  directory  names,  replacing
                     prefixes with ~ expressions, as appropriate.

              -i     If given together with -o or  -O,  sorting  is  performed
                     case-independently.

              -l     Print  the  arguments  separated  by  newlines instead of
                     spaces.

              -m     Take the first argument as a pattern (should be  quoted),
                     and  remove  it  from  the  argument  list  together with
                     subsequent arguments that do not match this pattern.

              -n     Do not add a newline to the output.

              -N     Print the arguments separated and terminated by nulls.

              -o     Print the arguments sorted in ascending order.

              -O     Print the arguments sorted in descending order.

              -p     Print the arguments to the input of the coprocess.

              -P     Perform  prompt  expansion  (see  EXPANSION   OF   PROMPT
                     SEQUENCES in zshmisc(1)).

              -r     Ignore the escape conventions of echo.

              -R     Emulate  the  BSD  echo  command,  which does not process
                     escape sequences unless the -e flag  is  given.   The  -n
                     flag suppresses the trailing newline.  Only the -e and -n
                     flags are recognized after -R; all  other  arguments  and
                     options are printed.

              -s     Place  the  results in the history list instead of on the
                     standard output.

              -u n   Print the arguments to file descriptor n.

              -z     Push  the  arguments  onto  the  editing  buffer   stack,
                     separated by spaces.

              If  any  of `-m', `-o' or `-O' are used in combination with `-f'
              and there are no arguments (after the  removal  process  in  the
              case of `-m') then nothing is printed.

       printf format [ arg ... ]
              Print  the  arguments  according  to  the  format specification.
              Formatting rules are the same as used  in  C.  The  same  escape
              sequences  as  for  echo  are  recognised  in  the format. All C
              conversion specifications ending in one  of  csdiouxXeEfgGn  are
              handled.  In  addition to this, `%b' can be used instead of `%s'
              to cause escape sequences in the argument to be  recognised  and
              `%q' can be used to quote the argument in such a way that allows
              it to  be  reused  as  shell  input.  With  the  numeric  format
              specifiers,  if  the  corresponding argument starts with a quote
              character, the numeric value of the following character is  used
              as the number to print otherwise the argument is evaluated as an
              arithmetic expression. See the section  `Arithmetic  Evaluation'
              in  zshmisc(1) for a description of arithmetic expressions. With
              `%n', the corresponding argument is taken as an identifier which
              is created as an integer parameter.

              Normally, conversion specifications are applied to each argument
              in order but they can explicitly specify the nth argument is  to
              be  used  by  replacing  `%'  by  `%n$' and `*' by `*n$'.  It is
              recommended that you do not  mix  references  of  this  explicit
              style  with  the  normal  style  and  the handling of such mixed
              styles may be subject to future change.

              If arguments remain unused after formatting, the  format  string
              is reused until all arguments have been consumed. With the print
              builtin, this can be suppressed by using the -r option. If  more
              arguments  are  required by the format than have been specified,
              the behaviour is  as  if  zero  or  an  empty  string  had  been
              specified as the argument.

       pushd [ -qsLP ] [ arg ]
       pushd [ -qsLP ] old new
       pushd [ -qsLP ] {+|-}n
              Change the current directory, and push the old current directory
              onto the directory stack.  In the first form, change the current
              directory to arg.  If arg is not specified, change to the second
              directory on the stack (that is, exchange the top two  entries),
              or  change  to  $HOME  if  the PUSHD_TO_HOME option is set or if
              there is only  one  entry  on  the  stack.   Otherwise,  arg  is
              interpreted as it would be by cd.  The meaning of old and new in
              the second form is also the same as for cd.

              The third form  of  pushd  changes  directory  by  rotating  the
              directory list.  An argument of the form `+n' identifies a stack
              entry by counting from the left of the list shown  by  the  dirs
              command,  starting  with  zero.   An  argument  of the form `-n'
              counts from the right.  If the PUSHD_MINUS option  is  set,  the
              meanings of `+' and `-' in this context are swapped.

              If  the  -q (quiet) option is specified, the hook function chpwd
              and the functions in the array $chpwd_functions are not  called,
              and  the new directory stack is not printed.  This is useful for
              calls to pushd that do not change the  environment  seen  by  an
              interactive user.

              If  the  option  -q  is  not  specified  and  the  shell  option
              PUSHD_SILENT is not set, the directory  stack  will  be  printed
              after a pushd is performed.

              The  options  -s, -L and -P have the same meanings as for the cd
              builtin.

       pushln [ arg ... ]
              Equivalent to print -nz.

       pwd [ -rLP ]
              Print the absolute pathname of the  current  working  directory.
              If the -r or the -P flag is specified, or the CHASE_LINKS option
              is set and the -L flag is not given, the printed path  will  not
              contain symbolic links.

       r      Same as fc -e -.

       read [ -rszpqAclneE ] [ -t [ num ] ] [ -k [ num ] ] [ -d delim ]
        [ -u n ] [ name[?prompt] ] [ name ...  ]
              Read  one  line and break it into fields using the characters in
              $IFS as separators, except as noted below.  The first  field  is
              assigned to the first name, the second field to the second name,
              etc., with leftover fields assigned to the last name.   If  name
              is omitted then REPLY is used for scalars and reply for arrays.

              -r     Raw  mode:  a  `\'  at the end of a line does not signify
                     line continuation and backslashes in the line don't quote
                     the following character and are not removed.

              -s     Don't  echo back characters if reading from the terminal.
                     Currently does not work with the -q option.

              -q     Read only one character from the terminal and set name to
                     `y'  if  this  character  was  `y'  or  `Y'  and  to  `n'
                     otherwise.  With this flag set the return status is  zero
                     only if the character was `y' or `Y'.  This option may be
                     used with a timeout; if the read times out, or encounters
                     end  of  file,  status 2 is returned.  Input is read from
                     the terminal unless one of -u or  -p  is  present.   This
                     option may also be used within zle widgets.

              -k [ num ]
                     Read  only  one (or num) characters.  All are assigned to
                     the first name, without word  splitting.   This  flag  is
                     ignored  when  -q  is  present.   Input  is read from the
                     terminal unless one of -u or -p is present.  This  option
                     may also be used within zle widgets.

                     Note  that  despite  the  mnemonic `key' this option does
                     read full characters, which may consist of multiple bytes
                     if the option MULTIBYTE is set.

              -z     Read one entry from the editor buffer stack and assign it
                     to the first  name,  without  word  splitting.   Text  is
                     pushed  onto  the stack with `print -z' or with push-line
                     from the line  editor  (see  zshzle(1)).   This  flag  is
                     ignored when the -k or -q flags are present.

              -e
              -E     The  input  read  is  printed  (echoed)  to  the standard
                     output.  If the -e flag is used, no input is assigned  to
                     the parameters.

              -A     The  first  name is taken as the name of an array and all
                     words are assigned to it.

              -c
              -l     These flags are allowed only if called inside a  function
                     used  for  completion  (specified  with  the  -K  flag to
                     compctl).  If the -c flag is  given,  the  words  of  the
                     current  command  are  read. If the -l flag is given, the
                     whole line is assigned as a scalar.  If  both  flags  are
                     present, -l is used and -c is ignored.

              -n     Together with -c, the number of the word the cursor is on
                     is read.  With -l, the index of the character the  cursor
                     is on is read.  Note that the command name is word number
                     1, not word 0, and that when the cursor is at the end  of
                     the  line,  its character index is the length of the line
                     plus one.

              -u n   Input is read from file descriptor n.

              -p     Input is read from the coprocess.

              -d delim
                     Input is terminated  by  the  first  character  of  delim
                     instead of by newline.

              -t [ num ]
                     Test if input is available before attempting to read.  If
                     num is present, it must begin with a digit  and  will  be
                     evaluated  to  give  a  number of seconds, which may be a
                     floating point number; in this case the read times out if
                     input  is  not available within this time.  If num is not
                     present, it is taken to be zero,  so  that  read  returns
                     immediately  if  no  input  is available.  If no input is
                     available, return status 1 and do not set any variables.

                     This option is not available when reading from the editor
                     buffer  with  -z, when called from within completion with
                     -c or -l, with -q which clears  the  input  queue  before
                     reading,  or  within zle where other mechanisms should be
                     used to test for input.

                     Note that read  does  not  attempt  to  alter  the  input
                     processing mode.  The default mode is canonical input, in
                     which an entire line is read at a time, so usually  `read
                     -t'  will not read anything until an entire line has been
                     typed.  However, when reading from the terminal  with  -k
                     input  is processed one key at a time; in this case, only
                     availability of the first character is  tested,  so  that
                     e.g.  `read  -t  -k  2'  can  still  block  on the second
                     character.  Use two instances of `read -t -k' if this  is
                     not what is wanted.

              If the first argument contains a `?', the remainder of this word
              is used as  a  prompt  on  standard  error  when  the  shell  is
              interactive.

              The  value  (exit  status)  of  read is 1 when an end-of-file is
              encountered, or when -c or -l is present and the command is  not
              called  from  a  compctl  function,  or  as  described  for  -q.
              Otherwise the value is 0.

              The behavior of some combinations of the -k, -p, -q, -u  and  -z
              flags  is  undefined.   Presently  -q cancels all the others, -p
              cancels -u, -k cancels -z, and otherwise -z cancels both -p  and
              -u.

              The -c or -l flags cancel any and all of -kpquz.

       readonly
              Same as typeset -r.

       rehash Same as hash -r.

       return [ n ]
              Causes  a shell function or `.' script to return to the invoking
              script with the return status specified by n.  If n is  omitted,
              the return status is that of the last command executed.

              If  return  was  executed from a trap in a TRAPNAL function, the
              effect is different for zero and non-zero return  status.   With
              zero  status  (or  after  an  implicit  return at the end of the
              trap), the shell will  return  to  whatever  it  was  previously
              processing;  with  a  non-zero  status, the shell will behave as
              interrupted except  that  the  return  status  of  the  trap  is
              retained.   Note  that  the  numeric  value  of the signal which
              caused the  trap  is  passed  as  the  first  argument,  so  the
              statement `return $((128+$1))' will return the same status as if
              the signal had not been trapped.

       sched  See the section `The zsh/sched Module' in zshmodules(1).

       set [ {+|-}options | {+|-}o [ option_name ] ] ... [ {+|-}A [ name ] ] [
       arg ... ]
              Set  the  options  for  the  shell  and/or  set  the  positional
              parameters, or declare and set an array.  If the  -s  option  is
              given,  it  causes  the  specified arguments to be sorted before
              assigning them to the positional parameters  (or  to  the  array
              name  if  -A  is  used).   With  +s sort arguments in descending
              order.  For the meaning of the other flags,  see  zshoptions(1).
              Flags may be specified by name using the -o option. If no option
              name is supplied with -o, the current option states are printed:
              see  the description of setopt below for more information on the
              format.  With +o they are printed in a form that can be used  as
              input to the shell.

              If  the -A flag is specified, name is set to an array containing
              the given args; if no name is specified, all arrays are  printed
              together with their values.

              If  +A  is  used  and name is an array, the given arguments will
              replace the initial elements  of  that  array;  if  no  name  is
              specified, all arrays are printed without their values.

              The  behaviour  of arguments after -A name or +A name depends on
              whether the option KSH_ARRAYS is set.  If it  is  not  set,  all
              arguments  following  name  are treated as values for the array,
              regardless of their form.  If the option is set,  normal  option
              processing  continues  at that point; only regular arguments are
              treated as values for the array.  This means that

                     set -A array -x -- foo

              sets array to `-x -- foo' if KSH_ARRAYS is not set, but sets the
              array to foo and turns on the option `-x' if it is set.

              If  the  -A  flag is not present, but there are arguments beyond
              the options, the positional parameters are set.  If  the  option
              list  (if  any)  is terminated by `--', and there are no further
              arguments, the positional parameters will be unset.

              If no arguments and no `--' are given, then the names and values
              of  all  parameters  are printed on the standard output.  If the
              only argument is `+', the names of all parameters are printed.

              For historical reasons, `set -' is treated as `set +xv' and `set
              -  args'  as  `set +xv -- args' when in any other emulation mode
              than zsh's native mode.

              The sched builtin is not made  available  by  default  when  the
              shell  starts in a mode emulating another shell.  It can be made
              available with the command `zmodload -F zsh/sched b:sched'.

       setcap See the section `The zsh/cap Module' in zshmodules(1).

       setopt [ {+|-}options | {+|-}o option_name ] [ name ... ]
              Set the options for the shell.   All  options  specified  either
              with flags or by name are set.

              If no arguments are supplied, the names of all options currently
              set are printed.  The form is  chosen  so  as  to  minimize  the
              differences  from  the default options for the current emulation
              (the default  emulation  being  native  zsh,  shown  as  <Z>  in
              zshoptions(1)).    Options  that  are  on  by  default  for  the
              emulation are shown with the prefix no only  if  they  are  off,
              while  other options are shown without the prefix no and only if
              they are on.  In addition to options changed  from  the  default
              state  by  the  user, any options activated automatically by the
              shell (for example, SHIN_STDIN or INTERACTIVE) will be shown  in
              the  list.   The  format  is  further  modified  by  the  option
              KSH_OPTION_PRINT, however the  rationale  for  choosing  options
              with or without the no prefix remains the same in this case.

              If  the  -m  flag  is  given the arguments are taken as patterns
              (which  should  be  quoted  to  protect   them   from   filename
              expansion),  and  all options with names matching these patterns
              are set.

       shift [ n ] [ name ... ]
              The positional parameters ${n+1} ...  are  renamed  to  $1  ...,
              where  n is an arithmetic expression that defaults to 1.  If any
              names are given then the arrays with  these  names  are  shifted
              instead of the positional parameters.

       source file [ arg ... ]
              Same  as  `.',  except  that  the  current  directory  is always
              searched and is always searched  first,  before  directories  in
              $path.

       stat   See the section `The zsh/stat Module' in zshmodules(1).

       suspend [ -f ]
              Suspend  the execution of the shell (send it a SIGTSTP) until it
              receives a SIGCONT.  Unless the -f option is  given,  this  will
              refuse to suspend a login shell.

       test [ arg ... ]
       [ [ arg ... ] ]
              Like  the  system version of test.  Added for compatibility; use
              conditional expressions instead (see  the  section  `Conditional
              Expressions').   The  main  differences  between the conditional
              expression syntax and  the  test  and  [  builtins  are:   these
              commands  are not handled syntactically, so for example an empty
              variable expansion may cause an argument to be  omitted;  syntax
              errors  cause  status 2 to be returned instead of a shell error;
              and arithmetic operators expect integer  arguments  rather  than
              arithmetic expressions.

              The command attempts to implement POSIX and its extensions where
              these  are  specified.   Unfortunately   there   are   intrinsic
              ambiguities in the syntax; in particular there is no distinction
              between test operators and  strings  that  resemble  them.   The
              standard   attempts  to  resolve  these  for  small  numbers  of
              arguments (up to four); for five or more arguments compatibility
              cannot  be  relied on.  Users are urged wherever possible to use
              the `[[' test syntax which does not have these ambiguities.

       times  Print the accumulated user and system times for  the  shell  and
              for processes run from the shell.

       trap [ arg ] [ sig ... ]
              arg  is  a series of commands (usually quoted to protect it from
              immediate evaluation by the shell) to be read and executed  when
              the  shell  receives any of the signals specified by one or more
              sig args.  Each sig can be given as a number, or as the name  of
              a signal either with or without the string SIG in front (e.g. 1,
              HUP, and SIGHUP are all the same signal).

              If arg is `-', then the specified signals  are  reset  to  their
              defaults, or, if no sig args are present, all traps are reset.

              If  arg  is  an  empty  string,  then  the specified signals are
              ignored by the shell (and by the commands it invokes).

              If arg is omitted but one or more sig args  are  provided  (i.e.
              the first argument is a valid signal number or name), the effect
              is the same as if arg had been specified as `-'.

              The trap command with no arguments prints  a  list  of  commands
              associated with each signal.

              If sig is ZERR then arg will be executed after each command with
              a nonzero exit status.  ERR is an alias for ZERR on systems that
              have no SIGERR signal (this is the usual case).

              If sig is DEBUG then arg will be executed before each command if
              the option DEBUG_BEFORE_CMD is set (as it is by  default),  else
              after each command.  Here, a `command' is what is described as a
              `sublist' in the shell grammar, see the section SIMPLE  COMMANDS
              &  PIPELINES  in zshmisc(1).  If DEBUG_BEFORE_CMD is set various
              additional features are available.  First,  it  is  possible  to
              skip  the  next  command by setting the option ERR_EXIT; see the
              description of the ERR_EXIT option in zshoptions(1).  Also,  the
              shell parameter ZSH_DEBUG_CMD is set to the string corresponding
              to the command to be executed following  the  trap.   Note  that
              this  string  is  reconstructed from the internal format and may
              not be formatted  the  same  way  as  the  original  text.   The
              parameter is unset after the trap is executed.

              If  sig  is  0 or EXIT and the trap statement is executed inside
              the body of a function, then the command arg is  executed  after
              the  function  completes.   The  value  of  $?  at  the start of
              execution is the exit status of the shell or the  return  status
              of  the  function  exiting.   If  sig  is 0 or EXIT and the trap
              statement is not executed inside the body of  a  function,  then
              the  command arg is executed when the shell terminates; the trap
              runs before any zshexit hook functions.

              ZERR, DEBUG, and EXIT traps are not executed inside other traps.
              ZERR  and  DEBUG  traps  are  kept within subshells, while other
              traps are reset.

              Note that traps defined  with  the  trap  builtin  are  slightly
              different  from  those  defined  as `TRAPNAL () { ... }', as the
              latter have their own function environment (line numbers,  local
              variables,  etc.)  while  the  former use the environment of the
              command in which they were called.  For example,

                     trap 'print $LINENO' DEBUG

              will print the line number of a command executed  after  it  has
              run, while

                     TRAPDEBUG() { print $LINENO; }

              will always print the number zero.

              Alternative  signal  names  are  allowed as described under kill
              above.  Defining a trap under either name causes any trap  under
              an  alternative  name to be removed.  However, it is recommended
              that for consistency users stick  exclusively  to  one  name  or
              another.

       true [ arg ... ]
              Do nothing and return an exit status of 0.

       ttyctl -fu
              The  -f  option  freezes the tty, and -u unfreezes it.  When the
              tty is frozen, no changes made to the tty settings  by  external
              programs will be honored by the shell, except for changes in the
              size of the screen; the shell will simply reset the settings  to
              their  previous  values  as  soon  as  each  command exits or is
              suspended.  Thus, stty and similar programs have no effect  when
              the  tty  is  frozen.   Without  options  it reports whether the
              terminal is frozen or not.

       type [ -wfpams ] name ...
              Equivalent to whence -v.

       typeset [ {+|-}AEFHUafghklprtuxmz ] [ -LRZi [ n ]] [ name[=value] ... ]
       typeset -T [ {+|-}Urux ] [ -LRZ [ n ]] SCALAR[=value] array [ sep ]
              Set or display attributes and values for shell parameters.

              A parameter is created for each name that does not already refer
              to  one.  When inside a function, a new parameter is created for
              every name (even those that already exist), and is  unset  again
              when   the   function  completes.   See  `Local  Parameters'  in
              zshparam(1).  The same rules apply to special shell  parameters,
              which retain their special attributes when made local.

              For  each  name=value  assignment,  the parameter name is set to
              value.  Note that arrays currently cannot be assigned in typeset
              expressions,  only  scalars  and  integers.   Unless  the option
              KSH_TYPESET is set, normal expansion rules apply  to  assignment
              arguments,  so  value  may  be split into separate words; if the
              option  is  set,  assignments  which  can  be  recognised   when
              expansion is performed are treated as single words.  For example
              the command typeset vbl=$(echo one two) is treated as having one
              argument  if  KSH_TYPESET  is  set,  but otherwise is treated as
              having the two arguments vbl=one and two.

              If  the  shell  option  TYPESET_SILENT  is  not  set,  for  each
              remaining  name that refers to a parameter that is set, the name
              and value of the  parameter  are  printed  in  the  form  of  an
              assignment.  Nothing is printed for newly-created parameters, or
              when any attribute flags listed below are given along  with  the
              name.   Using  `+'  instead  of  minus to introduce an attribute
              turns it off.

              If the -p option is given, parameters and values are printed  in
              the  form  of a typeset command and an assignment (which will be
              printed  separately  for   arrays   and   associative   arrays),
              regardless of other flags and options.  Note that the -h flag on
              parameters is respected;  no  value  will  be  shown  for  these
              parameters.

              If  the  -T  option  is  given,  two  or three arguments must be
              present (an exception is that zero arguments are allowed to show
              the  list of parameters created in this fashion).  The first two
              are the name of a scalar and an array parameter (in that  order)
              that  will  be  tied  together in the manner of $PATH and $path.
              The optional third  argument  is  a  single-character  separator
              which will be used to join the elements of the array to form the
              scalar; if absent, a colon is used, as  with  $PATH.   Only  the
              first  character  of the separator is significant; any remaining
              characters are  ignored.   Only  the  scalar  parameter  may  be
              assigned  an  initial  value.  Both the scalar and the array may
              otherwise be manipulated as normal.  If one is unset, the  other
              will automatically be unset too.  There is no way of untying the
              variables without unsetting them, or converting the type of  one
              of  them  with  another  typeset  command;  +T  does  not  work,
              assigning an array to SCALAR is an error, and assigning a scalar
              to  array  sets it to be a single-element array.  Note that both
              `typeset -xT ...' and `export -T ...' work, but only the  scalar
              will  be  marked for export.  Setting the value using the scalar
              version causes a  split  on  all  separators  (which  cannot  be
              quoted).

              The  -g  (global)  flag  is treated specially: it means that any
              resulting parameter will not be restricted to local scope.  Note
              that  this  does not necessarily mean that the parameter will be
              global, as the flag will apply to any existing  parameter  (even
              if unset) from an enclosing function.  This flag does not affect
              the parameter after  creation,  hence  it  has  no  effect  when
              listing  existing  parameters,  nor  does  the  flag +g have any
              effect except in combination with -m (see below).

              If no name is present, the names and values  of  all  parameters
              are  printed.   In  this  case  the attribute flags restrict the
              display  to  only  those  parameters  that  have  the  specified
              attributes,  and using `+' rather than `-' to introduce the flag
              suppresses printing of the values of parameters when there is no
              parameter  name.  Also, if the last option is the word `+', then
              names are printed but values are not.

              If the -m flag is given the name arguments are taken as patterns
              (which   should  be  quoted).   With  no  attribute  flags,  all
              parameters (or functions with the -f flag) with  matching  names
              are printed (the shell option TYPESET_SILENT is not used in this
              case).  Note that -m is ignored if no patterns  are  given.   If
              the  +g  flag  is  combined  with  -m,  a new local parameter is
              created for every matching parameter that is not already  local.
              Otherwise  -m  applies  all  other  flags  or assignments to the
              existing parameters.  Except  when  assignments  are  made  with
              name=value,  using  +m  forces  the  matching  parameters  to be
              printed, even inside a function.

              If no attribute flags are given and either no -m flag is present
              or the +m form was used, each parameter name printed is preceded
              by  a  list  of  the  attributes  of  that   parameter   (array,
              association,  exported,  integer, readonly).  If +m is used with
              attribute flags, and all those flags are introduced with +,  the
              matching parameter names are printed but their values are not.

              Attribute  flags that transform the final value (-L, -R, -Z, -l,
              u) are only applied to the expanded value  at  the  point  of  a
              parameter  expansion expression using `$'.  They are not applied
              when a parameter is retrieved internally by the  shell  for  any
              purpose.

              The following attribute flags may be specified:

              -A     The  names  refer  to  associative  array parameters; see
                     `Array Parameters' in zshparam(1).

              -L     Left justify and remove leading blanks from value.  If  n
                     is  nonzero,  it defines the width of the field.  If n is
                     zero, the width is determined by the width of  the  value
                     of   the  first  assignment.   In  the  case  of  numeric
                     parameters, the length of the complete value assigned  to
                     the  parameter  is  used  to determine the width, not the
                     value that would be output.

                     The width is  the  count  of  characters,  which  may  be
                     multibyte  characters  if  the  MULTIBYTE  option  is  in
                     effect.  Note that the screen width of the  character  is
                     not  taken into account; if this is required, use padding
                     with parameter expansion flags ${(ml...)...} as described
                     in `Parameter Expansion Flags' in zshexpn(1).

                     When the parameter is expanded, it is filled on the right
                     with blanks or truncated if necessary to fit  the  field.
                     Note  truncation  can  lead  to  unexpected  results with
                     numeric parameters.  Leading zeros are removed if the  -Z
                     flag is also set.

              -R     Similar  to  -L, except that right justification is used;
                     when the parameter is expanded, the field is left  filled
                     with  blanks  or  truncated  from  the  end.   May not be
                     combined with the -Z flag.

              -U     For arrays (but not for associative  arrays),  keep  only
                     the  first occurrence of each duplicated value.  This may
                     also be set for colon-separated special  parameters  like
                     PATH  or FIGNORE, etc.  This flag has a different meaning
                     when used with -f; see below.

              -Z     Specially  handled  if  set  along  with  the  -L   flag.
                     Otherwise,  similar  to -R, except that leading zeros are
                     used for padding instead of blanks if the first non-blank
                     character  is  a digit.  Numeric parameters are specially
                     handled:  they  are  always  eligible  for  padding  with
                     zeroes,  and  the  zeroes  are inserted at an appropriate
                     place in the output.

              -a     The names refer to array parameters.  An array  parameter
                     may be created this way, but it may not be assigned to in
                     the typeset statement.  When displaying, both normal  and
                     associative arrays are shown.

              -f     The  names refer to functions rather than parameters.  No
                     assignments can be made, and the only other  valid  flags
                     are  -t,  -k,  -u,  -U  and  -z.   The  flag  -t turns on
                     execution tracing for this function.  The -u and -U flags
                     cause  the function to be marked for autoloading; -U also
                     causes alias expansion to be suppressed when the function
                     is  loaded.  The fpath parameter will be searched to find
                     the  function  definition  when  the  function  is  first
                     referenced;  see  the  section `Functions'. The -k and -z
                     flags make the function  be  loaded  using  ksh-style  or
                     zsh-style  autoloading respectively. If neither is given,
                     the setting of the KSH_AUTOLOAD option determines how the
                     function is loaded.

              -h     Hide:  only  useful  for special parameters (those marked
                     `<S>'  in  the  table  in  zshparam(1)),  and  for  local
                     parameters  with  the  same  name as a special parameter,
                     though harmless for others.   A  special  parameter  with
                     this  attribute  will  not retain its special effect when
                     made local.  Thus after `typeset  -h  PATH',  a  function
                     containing  `typeset  PATH' will create an ordinary local
                     parameter  without   the   usual   behaviour   of   PATH.
                     Alternatively,  the  local  parameter may itself be given
                     this attribute; hence inside a function `typeset -h PATH'
                     creates  an ordinary local parameter and the special PATH
                     parameter is not altered in any way.  It is also possible
                     to  create  a local parameter using `typeset +h special',
                     where the local copy of special will retain  its  special
                     properties regardless of having the -h attribute.  Global
                     special parameters loaded from shell  modules  (currently
                     those in zsh/mapfile and zsh/parameter) are automatically
                     given the -h attribute to avoid name clashes.

              -H     Hide value: specifies that typeset will not  display  the
                     value  of  the  parameter  when  listing  parameters; the
                     display for such parameters is always as if the `+'  flag
                     had  been  given.   Use  of  the  parameter  is  in other
                     respects normal, and the option does  not  apply  if  the
                     parameter is specified by name, or by pattern with the -m
                     option.  This is on by default for the parameters in  the
                     zsh/parameter  and  zsh/mapfile  modules.  Note, however,
                     that  unlike  the  -h  flag  this  is  also  useful   for
                     non-special parameters.

              -i     Use  an internal integer representation.  If n is nonzero
                     it defines the output arithmetic base,  otherwise  it  is
                     determined  by  the first assignment.  Bases from 2 to 36
                     inclusive are allowed.

              -E     Use   an   internal   double-precision   floating   point
                     representation.  On output the variable will be converted
                     to scientific notation.  If n is nonzero it  defines  the
                     number  of significant figures to display; the default is
                     ten.

              -F     Use   an   internal   double-precision   floating   point
                     representation.  On output the variable will be converted
                     to fixed-point decimal notation.   If  n  is  nonzero  it
                     defines the number of digits to display after the decimal
                     point; the default is ten.

              -l     Convert the result to lower case whenever  the  parameter
                     is expanded.  The value is not converted when assigned.

              -r     The  given  names are marked readonly.  Note that if name
                     is a special parameter, the  readonly  attribute  can  be
                     turned on, but cannot then be turned off.

              -t     Tags  the named parameters.  Tags have no special meaning
                     to the shell.  This flag has  a  different  meaning  when
                     used with -f; see above.

              -u     Convert  the  result to upper case whenever the parameter
                     is expanded.  The value is not converted  when  assigned.
                     This  flag has a different meaning when used with -f; see
                     above.

              -x     Mark  for  automatic  export  to   the   environment   of
                     subsequently    executed   commands.    If   the   option
                     GLOBAL_EXPORT is set, this implies the option -g,  unless
                     +g is also explicitly given; in other words the parameter
                     is not made local to the enclosing function.  This is for
                     compatibility with previous versions of zsh.

       ulimit [ [ -SHacdfilmnpqstvx | -N resource [ limit ] ... ]
              Set  or  display  resource limits of the shell and the processes
              started by the shell.  The value of limit can be a number in the
              unit  specified  below  or  one of the values `unlimited', which
              removes the limit on the resource, or  `hard',  which  uses  the
              current value of the hard limit on the resource.

              By  default, only soft limits are manipulated. If the -H flag is
              given use hard limits instead of soft limits.  If the -S flag is
              given together with the -H flag set both hard and soft limits.

              If no options are used, the file size limit (-f) is assumed.

              If limit is omitted the current value of the specified resources
              are printed.  When more than one resource value is printed,  the
              limit name and unit is printed before each value.

              When  looping  over  multiple  resources,  the  shell will abort
              immediately if it detects a badly formed argument.  However,  if
              it  fails  to set a limit for some other reason it will continue
              trying to set the remaining limits.

              -a     Lists all of the current resource limits.
              -c     512-byte blocks on the size of core dumps.
              -d     K-bytes on the size of the data segment.
              -f     512-byte blocks on the size of files written.
              -i     The number of pending signals.
              -l     K-bytes on the size of locked-in memory.
              -m     K-bytes on the size of physical memory.
              -n     open file descriptors.
              -q     Bytes in POSIX message queues.
              -s     K-bytes on the size of the stack.
              -t     CPU seconds to be used.
              -u     processes available to the user.
              -v     K-bytes on the size of virtual memory.  On  some  systems
                     this refers to the limit called `address space'.
              -x     The number of locks on files.

              A  resource  may  also  be  specified by integer in the form `-N
              resource', where resource corresponds to the integer defined for
              the  resource  by the operating system.  This may be used to set
              the limits for  resources  known  to  the  shell  which  do  not
              correspond  to  option  letters.   Such  limits will be shown by
              number in the output of `ulimit -a'.

              The number may alternatively be  out  of  the  range  of  limits
              compiled  into  the  shell.  The shell will try to read or write
              the limit anyway, and will report an error if this fails.

       umask [ -S ] [ mask ]
              The umask is set to mask.  mask can be either an octal number or
              a  symbolic value as described in chmod(1).  If mask is omitted,
              the current value is printed.  The -S option causes the mask  to
              be  printed as a symbolic value.  Otherwise, the mask is printed
              as an  octal  number.   Note  that  in  the  symbolic  form  the
              permissions  you  specify are those which are to be allowed (not
              denied) to the users specified.

       unalias
              Same as unhash -a.

       unfunction
              Same as unhash -f.

       unhash [ -adfms ] name ...
              Remove the element named name from an internal hash table.   The
              default  is remove elements from the command hash table.  The -a
              option causes unhash to remove regular or global  aliases;  note
              when  removing a global aliases that the argument must be quoted
              to prevent it from being expanded before  being  passed  to  the
              command.   The -s option causes unhash to remove suffix aliases.
              The -f option causes unhash to remove shell functions.   The  -d
              options  causes  unhash  to remove named directories.  If the -m
              flag is given the arguments are taken  as  patterns  (should  be
              quoted)  and  all  elements of the corresponding hash table with
              matching names will be removed.

       unlimit [ -hs ] resource ...
              The resource limit for each resource is set to the  hard  limit.
              If   the  -h  flag  is  given  and  the  shell  has  appropriate
              privileges,  the  hard  resource  limit  for  each  resource  is
              removed.  The resources of the shell process are only changed if
              the -s flag is given.

              The unlimit command is not made available by  default  when  the
              shell  starts in a mode emulating another shell.  It can be made
              available with the command `zmodload -F zsh/rlimits b:unlimit'.

       unset [ -fmv ] name ...
              Each named parameter is unset.  Local  parameters  remain  local
              even  if unset; they appear unset within scope, but the previous
              value will still reappear when the scope ends.

              Individual elements of associative array parameters may be unset
              by  using  subscript  syntax on name, which should be quoted (or
              the  entire  command  prefixed  with  noglob)  to  protect   the
              subscript from filename generation.

              If  the -m flag is specified the arguments are taken as patterns
              (should be quoted) and all parameters with  matching  names  are
              unset.  Note that this cannot be used when unsetting associative
              array elements, as the subscript will be treated as part of  the
              pattern.

              The  -v  flag  specifies that name refers to parameters. This is
              the default behaviour.

              unset -f is equivalent to unfunction.

       unsetopt [ {+|-}options | {+|-}o option_name ] [ name ... ]
              Unset the options for the shell.  All options  specified  either
              with  flags or by name are unset.  If no arguments are supplied,
              the names of all options currently unset are printed.  If the -m
              flag  is given the arguments are taken as patterns (which should
              be quoted to  preserve  them  from  being  interpreted  as  glob
              patterns),  and  all  options with names matching these patterns
              are unset.

       vared  See the section `Zle Builtins' in zshzle(1).

       wait [ job ... ]
              Wait for the specified jobs or processes.  If job is  not  given
              then  all currently active child processes are waited for.  Each
              job can be either a job specification or the process ID of a job
              in  the job table.  The exit status from this command is that of
              the job waited for.

       whence [ -vcwfpams ] name ...
              For each name, indicate how it would be interpreted if used as a
              command name.

              -v     Produce a more verbose report.

              -c     Print  the  results  in  a  csh-like  format.  This takes
                     precedence over -v.

              -w     For each name, print `name: word' where word  is  one  of
                     alias,  builtin,  command,  function, hashed, reserved or
                     none, according  as  name  corresponds  to  an  alias,  a
                     built-in  command, an external command, a shell function,
                     a command defined with the hash builtin, a reserved word,
                     or  is not recognised.  This takes precedence over -v and
                     -c.

              -f     Causes the contents of a shell function to be  displayed,
                     which  would otherwise not happen unless the -c flag were
                     used.

              -p     Do a path search  for  name  even  if  it  is  an  alias,
                     reserved word, shell function or builtin.

              -a     Do  a  search  for all occurrences of name throughout the
                     command path.  Normally  only  the  first  occurrence  is
                     printed.

              -m     The  arguments  are taken as patterns (should be quoted),
                     and  the  information  is  displayed  for  each   command
                     matching one of these patterns.

              -s     If  a  pathname contains symlinks, print the symlink-free
                     pathname as well.

       where [ -wpms ] name ...
              Equivalent to whence -ca.

       which [ -wpams ] name ...
              Equivalent to whence -c.

       zcompile [ -U ] [ -z | -k ] [ -R | -M ] file [ name ... ]
       zcompile -ca [ -m ] [ -R | -M ] file [ name ... ]
       zcompile -t file [ name ... ]
              This builtin  command  can  be  used  to  compile  functions  or
              scripts,  storing  the  compiled  form in a file, and to examine
              files  containing  the  compiled  form.   This   allows   faster
              autoloading  of  functions  and execution of scripts by avoiding
              parsing of the text when the files are read.

              The first form (without the -c, -a  or  -t  options)  creates  a
              compiled  file.   If only the file argument is given, the output
              file has the name `file.zwc' and will  be  placed  in  the  same
              directory  as  the  file.  The shell will load the compiled file
              instead of  the  normal  function  file  when  the  function  is
              autoloaded;   see   the   section   `Autoloading  Functions'  in
              zshmisc(1) for a description of  how  autoloaded  functions  are
              searched.  The extension .zwc stands for `zsh word code'.

              If  there is at least one name argument, all the named files are
              compiled into the output file given as the first  argument.   If
              file  does  not  end  in  .zwc,  this extension is automatically
              appended.  Files  containing  multiple  compiled  functions  are
              called  `digest'  files, and are intended to be used as elements
              of the FPATH/fpath special array.

              The second form, with the -c or -a options, writes the  compiled
              definitions  for all the named functions into file.  For -c, the
              names must be functions currently  defined  in  the  shell,  not
              those  marked  for  autoloading.   Undefined  functions that are
              marked for autoloading may be written by using the -a option, in
              which  case  the  fpath  is  searched  and  the  contents of the
              definition files for those functions,  if  found,  are  compiled
              into  file.   If both -c and -a are given, names of both defined
              functions and functions marked for autoloading may be given.  In
              either  case,  the  functions in files written with the -c or -a
              option will be autoloaded as if  the  KSH_AUTOLOAD  option  were
              unset.

              The reason for handling loaded and not-yet-loaded functions with
              different options is that some definition files for  autoloading
              define  multiple functions, including the function with the same
              name as the file, and, at the end, call that function.  In  such
              cases   the  output  of  `zcompile  -c'  does  not  include  the
              additional  functions  defined  in  the  file,  and  any   other
              initialization  code  in  the file is lost.  Using `zcompile -a'
              captures all this extra information.

              If the -m option is combined with -c or -a, the names  are  used
              as  patterns  and  all  functions whose names match one of these
              patterns will be written. If no name is given,  the  definitions
              of  all functions currently defined or marked as autoloaded will
              be written.

              The third  form,  with  the  -t  option,  examines  an  existing
              compiled  file.   Without  further  arguments,  the names of the
              original files compiled into it are listed.  The first  line  of
              output  shows  the  version of the shell which compiled the file
              and how the file will be used (i.e. by reading it directly or by
              mapping  it into memory).  With arguments, nothing is output and
              the return status is set to zero if definitions  for  all  names
              were  found in the compiled file, and non-zero if the definition
              for at least one name was not found.

              Other options:

              -U     Aliases are not expanded when compiling the named files.

              -R     When the compiled file is read, its contents  are  copied
                     into  the  shell's memory, rather than memory-mapped (see
                     -M).  This happens automatically on systems that  do  not
                     support memory mapping.

                     When compiling scripts instead of autoloadable functions,
                     it is often desirable to use this option;  otherwise  the
                     whole  file, including the code to define functions which
                     have  already   been   defined,   will   remain   mapped,
                     consequently wasting memory.

              -M     The  compiled file is mapped into the shell's memory when
                     read. This is done in such a way that multiple  instances
                     of  the  shell  running  on the same host will share this
                     mapped file.  If neither -R nor -M is given, the zcompile
                     builtin  decides  what  to  do  based  on the size of the
                     compiled file.

              -k
              -z     These options are used when the  compiled  file  contains
                     functions which are to be autoloaded. If -z is given, the
                     function will be autoloaded as if the KSH_AUTOLOAD option
                     is  not  set,  even if it is set at the time the compiled
                     file is read, while if the -k is given, the function will
                     be  loaded as if KSH_AUTOLOAD is set.  These options also
                     take precedence over any -k or -z  options  specified  to
                     the  autoload  builtin.  If  neither  of these options is
                     given, the function will be loaded as determined  by  the
                     setting  of  the  KSH_AUTOLOAD  option  at  the  time the
                     compiled file is read.

                     These options may also appear as many times as  necessary
                     between  the listed names to specify the loading style of
                     all following functions, up to the next -k or -z.

                     The created file always  contains  two  versions  of  the
                     compiled  format, one for big-endian machines and one for
                     small-endian machines.  The upshot of this  is  that  the
                     compiled file is machine independent and if it is read or
                     mapped, only one half of the file is actually  used  (and
                     mapped).

       zformat
              See the section `The zsh/zutil Module' in zshmodules(1).

       zftp   See the section `The zsh/zftp Module' in zshmodules(1).

       zle    See the section `Zle Builtins' in zshzle(1).

       zmodload [ -dL ] [ ... ]
       zmodload -F [ -lLme -P param ] module [+-]feature...
       zmodload -e [ -A ] [ ... ]
       zmodload [ -a [ -bcpf [ -I ] ] ] [ -iL ] ...
       zmodload -u [ -abcdpf [ -I ] ] [ -iL ] ...
       zmodload -A [ -L ] [ modalias[=module] ... ]
       zmodload -R modalias ...
              Performs operations relating to zsh's loadable modules.  Loading
              of modules while the shell is running (`dynamical  loading')  is
              not  available on all operating systems, or on all installations
              on a particular operating system, although the zmodload  command
              itself is always available and can be used to manipulate modules
              built into versions of the shell  executable  without  dynamical
              loading.

              Without  arguments  the  names  of  all  currently loaded binary
              modules are printed.  The -L option causes this list  to  be  in
              the form of a series of zmodload commands.  Forms with arguments
              are:

              zmodload [ -i ] name ...
              zmodload -u [ -i ] name ...
                     In the simplest case, zmodload  loads  a  binary  module.
                     The  module  must  be in a file with a name consisting of
                     the specified name followed by a standard suffix, usually
                     `.so'  (`.sl'  on  HPUX).   If the module to be loaded is
                     already loaded  the  duplicate  module  is  ignored.   If
                     zmodload  detects  an  inconsistency,  such as an invalid
                     module name or circular dependency list, the current code
                     block  is  aborted.   Hence `zmodload module 2>/dev/null'
                     is sufficient to test whether a module is available.   If
                     it is available, the module is loaded if necessary, while
                     if it is  not  available,  non-zero  status  is  silently
                     returned.   The  option  -i is accepted for compatibility
                     but has no effect.

                     The named module is  searched  for  in  the  same  way  a
                     command   is,   using   $module_path  instead  of  $path.
                     However, the path  search  is  performed  even  when  the
                     module name contains a `/', which it usually does.  There
                     is no way to prevent the path search.

                     If the module supports  features  (see  below),  zmodload
                     tries  to  enable all features when loading a module.  If
                     the module was successfully loaded but not  all  features
                     could be enabled, zmodload returns status 2.

                     With -u, zmodload unloads modules.  The same name must be
                     given that was given when the module was loaded,  but  it
                     is  not  necessary  for  the  module to exist in the file
                     system.  The -i option suppresses the error if the module
                     is already unloaded (or was never loaded).

                     Each  module  has  a  boot  and  a cleanup function.  The
                     module will not be loaded if  its  boot  function  fails.
                     Similarly  a  module  can only be unloaded if its cleanup
                     function runs successfully.

              zmodload -F [ -almLe -P param ] module [+-]feature...
                     zmodload  -F  allows  more  selective  control  over  the
                     features provided by modules.  With no options apart from
                     -F, the module named module is  loaded,  if  it  was  not
                     already  loaded,  and  the list of features is set to the
                     required state.  If no features are specified, the module
                     is loaded, if it was not already loaded, but the state of
                     features is unchanged.  Each feature may be preceded by a
                     +  to  turn the feature on, or - to turn it off; the + is
                     assumed if neither character is present.  Any feature not
                     explicitly mentioned is left in its current state; if the
                     module was not previously  loaded  this  means  any  such
                     features will remain disabled.  The return status is zero
                     if all features were set, 1 if the module failed to load,
                     and  2  if some features could not be set (for example, a
                     parameter couldn't be added because there was a different
                     parameter of the same name) but the module was loaded.

                     The   standard   features   are   builtins,   conditions,
                     parameters and math functions; these are indicated by the
                     prefix `b:', `c:' (`C:' for an infix condition), `p:' and
                     `f:',  respectively,  followed  by  the  name  that   the
                     corresponding  feature  would  have  in  the  shell.  For
                     example, `b:strftime' indicates a builtin named  strftime
                     and    p:EPOCHSECONDS   indicates   a   parameter   named
                     EPOCHSECONDS.  The module may provide other  (`abstract')
                     features  of  its  own as indicated by its documentation;
                     these have no prefix.

                     With -l or  -L,  features  provided  by  the  module  are
                     listed.   With -l alone, a list of features together with
                     their states is shown, one feature  per  line.   With  -L
                     alone,  a  zmodload  -F  command that would cause enabled
                     features of the module to be turned on  is  shown.   With
                     -lL,  a  zmodload  -F  command  that  would cause all the
                     features to be set to their current state is  shown.   If
                     one  of  these  combinations is given the option -P param
                     then the parameter param is set to an array of  features,
                     either features together with their state or (if -L alone
                     is given) enabled features.

                     With the option -L the module name may be omitted; then a
                     list  of  all  enabled features for all modules providing
                     features is printed in the form of zmodload -F  commands.
                     If  -l  is  also  given,  the  state  of both enabled and
                     disabled features is output in that form.

                     A set of features may be provided together with -l or  -L
                     and  a  module name; in that case only the state of those
                     features is considered.  Each feature may be preceded  by
                     +  or  -  but  the character has no effect.  If no set of
                     features is provided, all features are considered.

                     With -e, the command  first  tests  that  the  module  is
                     loaded;  if  it  is  not,  status  1 is returned.  If the
                     module is loaded,  the  list  of  features  given  as  an
                     argument  is  examined.  Any feature given with no prefix
                     is simply tested to see if the module  provides  it;  any
                     feature given with a prefix + or - is tested to see if is
                     provided and in the given state.  If  the  tests  on  all
                     features  in the list succeed, status 0 is returned, else
                     status 1.

                     With -m, each entry in the  given  list  of  features  is
                     taken  as  a  pattern  to  be matched against the list of
                     features provided by the module.  An initial + or -  must
                     be  given  explicitly.  This may not be combined with the
                     -a option as autoloads must be specified explicitly.

                     With -a,  the  given  list  of  features  is  marked  for
                     autoload  from the specified module, which may not yet be
                     loaded.  An optional +  may  appear  before  the  feature
                     name.   If  the  feature is prefixed with -, any existing
                     autoload is removed.  The options -l and -L may  be  used
                     to list autoloads.  Autoloading is specific to individual
                     features; when the module is loaded  only  the  requested
                     feature  is  enabled.  Autoload requests are preserved if
                     the module is subsequently  unloaded  until  an  explicit
                     `zmodload  -Fa  module -feature' is issued.  It is not an
                     error to request an autoload for a feature  of  a  module
                     that is already loaded.

                     When  the  module  is  loaded  each  autoload  is checked
                     against the features actually provided by the module;  if
                     the  feature  is  not  provided  the  autoload request is
                     deleted.  A warning message is output; if the  module  is
                     being  loaded  to  provide  a different feature, and that
                     autoload is successful, there is no effect on the  status
                     of  the current command.  If the module is already loaded
                     at the time when zmodload -Fa is run, an error message is
                     printed and status 1 returned.

                     zmodload  -Fa  can  be  used  with  the -l, -L, -e and -P
                     options  for  listing  and  testing  the   existence   of
                     autoloadable  features.  In this case -l is ignored if -L
                     is specified.  zmodload -FaL with no  module  name  lists
                     autoloads for all modules.

                     Note  that  only standard features as described above can
                     be autoloaded; other features require the  module  to  be
                     loaded before enabling.

              zmodload -d [ -L ] [ name ]
              zmodload -d name dep ...
              zmodload -ud name [ dep ... ]
                     The -d option can be used to specify module dependencies.
                     The modules named in the second and subsequent  arguments
                     will  be  loaded  before  the  module  named in the first
                     argument.

                     With -d and  one  argument,  all  dependencies  for  that
                     module  are listed.  With -d and no arguments, all module
                     dependencies are listed.  This listing is by default in a
                     Makefile-like  format.  The -L option changes this format
                     to a list of zmodload -d commands.

                     If -d and -u are both used, dependencies are removed.  If
                     only  one  argument  is  given, all dependencies for that
                     module are removed.

              zmodload -ab [ -L ]
              zmodload -ab [ -i ] name [ builtin ... ]
              zmodload -ub [ -i ] builtin ...
                     The -ab option defines autoloaded builtins.   It  defines
                     the  specified  builtins.   When any of those builtins is
                     called, the module specified in  the  first  argument  is
                     loaded  and  all  its features are enabled (for selective
                     control of features use `zmodload  -F  -a'  as  described
                     above).   If  only  the  name  is  given,  one builtin is
                     defined, with the same name as the module.  -i suppresses
                     the   error   if   the  builtin  is  already  defined  or
                     autoloaded, but not if another builtin of the  same  name
                     is already defined.

                     With  -ab  and  no arguments, all autoloaded builtins are
                     listed, with the module  name  (if  different)  shown  in
                     parentheses  after  the  builtin  name.   The  -L  option
                     changes this format to a list of zmodload -a commands.

                     If -b is used together with the  -u  option,  it  removes
                     builtins  previously  defined  with  -ab.   This  is only
                     possible if the builtin is not yet loaded.  -i suppresses
                     the  error  if  the  builtin is already removed (or never
                     existed).

                     Autoload  requests  are  retained  if   the   module   is
                     subsequently  unloaded  until  an  explicit `zmodload -ub
                     builtin' is issued.

              zmodload -ac [ -IL ]
              zmodload -ac [ -iI ] name [ cond ... ]
              zmodload -uc [ -iI ] cond ...
                     The -ac option is used  to  define  autoloaded  condition
                     codes.  The cond strings give the names of the conditions
                     defined by the module. The optional -I option is used  to
                     define  infix condition names. Without this option prefix
                     condition names are defined.

                     If given no condition names, all defined names are listed
                     (as  a  series  of  zmodload commands if the -L option is
                     given).

                     The  -uc  option  removes  definitions   for   autoloaded
                     conditions.

              zmodload -ap [ -L ]
              zmodload -ap [ -i ] name [ parameter ... ]
              zmodload -up [ -i ] parameter ...
                     The  -p  option  is like the -b and -c options, but makes
                     zmodload work on autoloaded parameters instead.

              zmodload -af [ -L ]
              zmodload -af [ -i ] name [ function ... ]
              zmodload -uf [ -i ] function ...
                     The -f option is like the -b, -p,  and  -c  options,  but
                     makes zmodload work on autoloaded math functions instead.

              zmodload -a [ -L ]
              zmodload -a [ -i ] name [ builtin ... ]
              zmodload -ua [ -i ] builtin ...
                     Equivalent to -ab and -ub.

              zmodload -e [ -A ] [ string ... ]
                     The -e option without arguments lists all loaded modules;
                     if  the  -A  option  is  also   given,   module   aliases
                     corresponding  to  loaded  modules  are  also  shown.  If
                     arguments are provided, nothing is  printed;  the  return
                     status  is  set to zero if all strings given as arguments
                     are names of loaded modules and to one  if  at  least  on
                     string  is  not the name of a loaded module.  This can be
                     used to test for the availability of  things  implemented
                     by  modules.  In this case, any aliases are automatically
                     resolved and the -A flag is not used.

              zmodload -A [ -L ] [ modalias[=module] ... ]
                     For each argument, if both modalias and module are given,
                     define modalias to be an alias for the module module.  If
                     the  module  modalias  is  ever  subsequently  requested,
                     either  via  a  call to zmodload or implicitly, the shell
                     will attempt to load module instead.  If  module  is  not
                     given,  show the definition of modalias.  If no arguments
                     are  given,  list  all  defined  module  aliases.    When
                     listing,  if  the  -L  flag  was  also  given,  list  the
                     definition as a zmodload command to recreate the alias.

                     The  existence  of  aliases  for  modules  is  completely
                     independent  of  whether  the  name  resolved is actually
                     loaded as a module: while the alias exists,  loading  and
                     unloading the module under any alias has exactly the same
                     effect as using the resolved name, and  does  not  affect
                     the  connection  between  the alias and the resolved name
                     which  can  be  removed  either  by  zmodload  -R  or  by
                     redefining  the alias.  Chains of aliases (i.e. where the
                     first resolved name is itself an alias) are valid so long
                     as  these are not circular.  As the aliases take the same
                     format as module names, they may include path separators:
                     in this case, there is no requirement for any part of the
                     path named to exist as the alias will be resolved  first.
                     For example, `any/old/alias' is always a valid alias.

                     Dependencies  added to aliased modules are actually added
                     to the resolved module; these  remain  if  the  alias  is
                     removed.   It  is  valid to create an alias whose name is
                     one of the standard shell modules and which resolves to a
                     different module.  However, if a module has dependencies,
                     it will not be possible to use  the  module  name  as  an
                     alias  as the module will already be marked as a loadable
                     module in its own right.

                     Apart from the above, aliases can be used in the zmodload
                     command  anywhere  module  names  are required.  However,
                     aliases will not be shown in lists of loaded modules with
                     a bare `zmodload'.

              zmodload -R modalias ...
                     For each modalias argument that was previously defined as
                     a module alias via zmodload -A, delete the alias.  If any
                     was  not defined, an error is caused and the remainder of
                     the line is ignored.

              Note that zsh makes no distinction  between  modules  that  were
              linked  into  the shell and modules that are loaded dynamically.
              In both cases this builtin  command  has  to  be  used  to  make
              available  the  builtins  and  other  things  defined by modules
              (unless the module is autoloaded on these definitions). This  is
              true  even  for  systems  that  don't support dynamic loading of
              modules.

       zparseopts
              See the section `The zsh/zutil Module' in zshmodules(1).

       zprof  See the section `The zsh/zprof Module' in zshmodules(1).

       zpty   See the section `The zsh/zpty Module' in zshmodules(1).

       zregexparse
              See the section `The zsh/zutil Module' in zshmodules(1).

       zsocket
              See the section `The zsh/net/socket Module' in zshmodules(1).

       zstyle See the section `The zsh/zutil Module' in zshmodules(1).

       ztcp   See the section `The zsh/net/tcp Module' in zshmodules(1).