Provided by: libarchive1_2.8.4-1_i386 bug

NAME

     cpio -- format of cpio archive files

DESCRIPTION

     The cpio archive format collects any number of files, directories, and
     other file system objects (symbolic links, device nodes, etc.) into a
     single stream of bytes.

   General Format
     Each file system object in a cpio archive comprises a header record with
     basic numeric metadata followed by the full pathname of the entry and the
     file data.  The header record stores a series of integer values that
     generally follow the fields in struct stat.  (See stat(2) for details.)
     The variants differ primarily in how they store those integers (binary,
     octal, or hexadecimal).  The header is followed by the pathname of the
     entry (the length of the pathname is stored in the header) and any file
     data.  The end of the archive is indicated by a special record with the
     pathname ``TRAILER!!!''.

   PWB format
     XXX Any documentation of the original PWB/UNIX 1.0 format? XXX

   Old Binary Format
     The old binary cpio format stores numbers as 2-byte and 4-byte binary
     values.  Each entry begins with a header in the following format:

           struct header_old_cpio {
                   unsigned short   c_magic;
                   unsigned short   c_dev;
                   unsigned short   c_ino;
                   unsigned short   c_mode;
                   unsigned short   c_uid;
                   unsigned short   c_gid;
                   unsigned short   c_nlink;
                   unsigned short   c_rdev;
                   unsigned short   c_mtime[2];
                   unsigned short   c_namesize;
                   unsigned short   c_filesize[2];
           };

     The unsigned short fields here are 16-bit integer values; the unsigned
     int fields are 32-bit integer values.  The fields are as follows

     magic   The integer value octal 070707.  This value can be used to
             determine whether this archive is written with little-endian or
             big-endian integers.

     dev, ino
             The device and inode numbers from the disk.  These are used by
             programs that read cpio archives to determine when two entries
             refer to the same file.  Programs that synthesize cpio archives
             should be careful to set these to distinct values for each entry.

     mode    The mode specifies both the regular permissions and the file
             type.  It consists of several bit fields as follows:
             0170000  This masks the file type bits.
             0140000  File type value for sockets.
             0120000  File type value for symbolic links.  For symbolic links,
                      the link body is stored as file data.
             0100000  File type value for regular files.
             0060000  File type value for block special devices.
             0040000  File type value for directories.
             0020000  File type value for character special devices.
             0010000  File type value for named pipes or FIFOs.
             0004000  SUID bit.
             0002000  SGID bit.
             0001000  Sticky bit.  On some systems, this modifies the behavior
                      of executables and/or directories.
             0000777  The lower 9 bits specify read/write/execute permissions
                      for world, group, and user following standard POSIX
                      conventions.

     uid, gid
             The numeric user id and group id of the owner.

     nlink   The number of links to this file.  Directories always have a
             value of at least two here.  Note that hardlinked files include
             file data with every copy in the archive.

     rdev    For block special and character special entries, this field
             contains the associated device number.  For all other entry
             types, it should be set to zero by writers and ignored by
             readers.

     mtime   Modification time of the file, indicated as the number of seconds
             since the start of the epoch, 00:00:00 UTC January 1, 1970.  The
             four-byte integer is stored with the most-significant 16 bits
             first followed by the least-significant 16 bits.  Each of the two
             16 bit values are stored in machine-native byte order.

     namesize
             The number of bytes in the pathname that follows the header.
             This count includes the trailing NUL byte.

     filesize
             The size of the file.  Note that this archive format is limited
             to four gigabyte file sizes.  See mtime above for a description
             of the storage of four-byte integers.

     The pathname immediately follows the fixed header.  If the namesize is
     odd, an additional NUL byte is added after the pathname.  The file data
     is then appended, padded with NUL bytes to an even length.

     Hardlinked files are not given special treatment; the full file contents
     are included with each copy of the file.

   Portable ASCII Format
     Version 2 of the Single UNIX Specification (``SUSv2'') standardized an
     ASCII variant that is portable across all platforms.  It is commonly
     known as the ``old character'' format or as the ``odc'' format.  It
     stores the same numeric fields as the old binary format, but represents
     them as 6-character or 11-character octal values.

           struct cpio_odc_header {
                   char    c_magic[6];
                   char    c_dev[6];
                   char    c_ino[6];
                   char    c_mode[6];
                   char    c_uid[6];
                   char    c_gid[6];
                   char    c_nlink[6];
                   char    c_rdev[6];
                   char    c_mtime[11];
                   char    c_namesize[6];
                   char    c_filesize[11];
           };

     The fields are identical to those in the old binary format.  The name and
     file body follow the fixed header.  Unlike the old binary format, there
     is no additional padding after the pathname or file contents.  If the
     files being archived are themselves entirely ASCII, then the resulting
     archive will be entirely ASCII, except for the NUL byte that terminates
     the name field.

   New ASCII Format
     The "new" ASCII format uses 8-byte hexadecimal fields for all numbers and
     separates device numbers into separate fields for major and minor
     numbers.

           struct cpio_newc_header {
                   char    c_magic[6];
                   char    c_ino[8];
                   char    c_mode[8];
                   char    c_uid[8];
                   char    c_gid[8];
                   char    c_nlink[8];
                   char    c_mtime[8];
                   char    c_filesize[8];
                   char    c_devmajor[8];
                   char    c_devminor[8];
                   char    c_rdevmajor[8];
                   char    c_rdevminor[8];
                   char    c_namesize[8];
                   char    c_check[8];
           };

     Except as specified below, the fields here match those specified for the
     old binary format above.

     magic   The string ``070701''.

     check   This field is always set to zero by writers and ignored by
             readers.  See the next section for more details.

     The pathname is followed by NUL bytes so that the total size of the fixed
     header plus pathname is a multiple of four.  Likewise, the file data is
     padded to a multiple of four bytes.  Note that this format supports only
     4 gigabyte files (unlike the older ASCII format, which supports 8
     gigabyte files).

     In this format, hardlinked files are handled by setting the filesize to
     zero for each entry except the last one that appears in the archive.

   New CRC Format
     The CRC format is identical to the new ASCII format described in the
     previous section except that the magic field is set to ``070702'' and the
     check field is set to the sum of all bytes in the file data.  This sum is
     computed treating all bytes as unsigned values and using unsigned
     arithmetic.  Only the least-significant 32 bits of the sum are stored.

   HP variants
     The cpio implementation distributed with HPUX used XXXX but stored device
     numbers differently XXX.

   Other Extensions and Variants
     Sun Solaris uses additional file types to store extended file data,
     including ACLs and extended attributes, as special entries in cpio
     archives.

     XXX Others? XXX

BUGS

     The ``CRC'' format is mis-named, as it uses a simple checksum and not a
     cyclic redundancy check.

     The old binary format is limited to 16 bits for user id, group id,
     device, and inode numbers.  It is limited to 4 gigabyte file sizes.

     The old ASCII format is limited to 18 bits for the user id, group id,
     device, and inode numbers.  It is limited to 8 gigabyte file sizes.

     The new ASCII format is limited to 4 gigabyte file sizes.

     None of the cpio formats store user or group names, which are essential
     when moving files between systems with dissimilar user or group
     numbering.

     Especially when writing older cpio variants, it may be necessary to map
     actual device/inode values to synthesized values that fit the available
     fields.  With very large filesystems, this may be necessary even for the
     newer formats.

SEE ALSO

     cpio(1), tar(5)

STANDARDS

     The cpio utility is no longer a part of POSIX or the Single Unix
     Standard.  It last appeared in Version 2 of the Single UNIX Specification
     (``SUSv2'').  It has been supplanted in subsequent standards by pax(1).
     The portable ASCII format is currently part of the specification for the
     pax(1) utility.

HISTORY

     The original cpio utility was written by Dick Haight while working in
     AT&T's Unix Support Group.  It appeared in 1977 as part of PWB/UNIX 1.0,
     the ``Programmer's Work Bench'' derived from Version 6 AT&T UNIX that was
     used internally at AT&T.  Both the old binary and old character formats
     were in use by 1980, according to the System III source released by SCO
     under their ``Ancient Unix'' license.  The character format was adopted
     as part of IEEE Std 1003.1-1988 (``POSIX.1'').  XXX when did "newc"
     appear?  Who invented it?  When did HP come out with their variant?  When
     did Sun introduce ACLs and extended attributes? XXX